Condition: used, IMV Type: i240 + Amplifier SA3M + Fan Dimensions: Power amplifier: SA3M-i40EM-CE WxHxD 580 x 1950 x 850 mm Vibration exciter: i240 WxHxD 1234 x 997 x 720 mm Bwjdpfezimf Aox Ap Dsw Technical data of the system: Armature mass: 20 kg Armature diameter: 290 mm Armature resonance: 2300 Hz Permissible eccentric moment: 850 N·m Frequency range: 0-2600 Hz Maximum force: 24 kN (Sine and random) 48 kN (Shock) Maximum acceleration: 1200 m/s² (Sine) 840 m/s² (Random) 2400 m/s² (Shock) Maximum displacement: 100 mm p-p Maximum load capacity: 400 kg Environmental conditions: Temperature 0-40 °C, humidity 0-85 %RH Maximum output power: 30 kVA (SA3M-i40EM-CE) + Shaker armature 290 mm Usable up to 2000 Hz Weight: 410 kg (SA3M-i40EM-CE) Total weight approx. 2800 kg Condition: used Scope of supply: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 07/24/2020 Complete analysis using the stationary spark optical emission spectrometer SpectroMaxX: Using the spark optical emission spectrometer, the alloy compositions and trace elements of macroscopic solid samples can be determined with high accuracy, down to the ppm range. Description of the system: Open spark stand for high sample throughput A wide variety of sample geometries are possible The following elements are available as a basis: Magnesium The analyzable elements and concentration ranges depend on the methods available for the respective base element. Usable wavelength range: 170-670 nm Output of measurement values in concentrations or intensities Selectable output units (%, ppm) Output of statistical parameters (mean, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm; the applicable and configured wavelength range depends on the customer's application requirements. Automated profiling Bsdpfx Ajzizdtop Deww Analysis modules: Freely selectable analysis modules Optimized for customer requirements Expansion with additional modules possible on-site Spark stand: Open spark stand for high sample throughput and various sample geometries Minimized argon consumption due to the argon-saving module Optimized argon flow Reduced cleaning intervals Spark stand plate easily replaceable Temperature-absorbing design without water cooling Integrated shutter system for optimal plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation, and digital offline pulse control 32 MHz microcontroller Max. spark duration: 4000 µs Max. spark power: 4 kW Display system: Dedicated microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/grade Result Manager Online maintenance scheduler Environmental conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Condition: used, BAT Shaker Fixture Cube / Clamping Cube Magnesium Shaker Fixture Cube Professional clamping cube for vibration testing rigs / shakers with an M8 thread grid for flexible test specimen mounting For sale is a used clamping cube for vibration and shock testing rigs. The adapter cube is used to securely hold test specimens on vibration testing rigs (shaker systems). Thanks to the numerous threaded holes on several sides, a wide variety of devices and test specimens can be flexibly mounted. The lightweight magnesium construction offers high rigidity with a comparatively low weight and is ideal for development, endurance, and environmental testing. Technical data: Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Threaded holes: M8 grid on several sides Dimensions (approx.): 300 × 300 × 300 mm Weight: approx. 28–32 kg (estimated) Features: Solid magnesium design M8 thread grid on several sides Two stop eyes Precision-machined clamping surfaces High rigidity with low weight Ideal for individual test setups Accessories as shown in the pictures Areas of application: Bodpfx Apszkgqne Doww Vibration testing rigs Shock testing Environmental simulation Automotive testing technology Aerospace Development and testing laboratories Quality assurance Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear, scratches and marks are present. The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, LDS Dactron LDS Dactron COMET USB Shaker Control System Type: COM 200 Vibration Controller / Shaker Controller For sale is a used LDS Dactron COMET USB Shaker Control System, model COM 200. This system is suitable for electrodynamic shaker systems, vibration testing, and shock testing, including random, sine, and shock tests. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjaer Type: COMET USB Model: COM 200 Serial Number: 11303191 Made in U.S.A. Technical Specifications 2-channel shaker control system USB connection Power supply: 100 - 240 V Frequency: 47 - 63 Hz Current consumption: 0.5 A Suitable for random, swept-sine, and shock tests on electrodynamic vibration testing systems. Software / Functions Installed software (as displayed): Shaker Control Version 8.1001 Library Version 6.3120 Unlocked module (as displayed in the software): Value Swept Sine Activated option (as displayed in the software): Real Time Data Exchange Calibration Calibration data (according to label): Calibration date: 2010-09-21 Due date: 2011-09-21 Note: The calibration has expired. Recalibration can be arranged by the buyer if required. Connections USB interface BNC connectors Power connector Other connections as shown in the images Scope of supply LDS Dactron COMET USB COM 200 Controller Power cable / connection cable as shown in the images Accessories as shown in the images Condition Used Optical condition as shown in the images Normal signs of storage and use Important note: All information has been provided to the best of our knowledge based on the images, nameplates, and manufacturer information. Shipping is possible. Bedoy Ugrpspfx Ap Deww Subject to change, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: excellent (used), Year of construction: 2016, Travel paths X / Y / Z 300 / 200 / 200 mm Max. table load: 16 kg Bwsdpfjt E Hd Rex Ap Dew Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, Zwick / Roell Zwick Indentec Hardness Tester Type: 4150DLC-A Technical Data: Available test forces: 60, 100, and 150 kgf Power supply: 115 / 230 V (50 - 60 Hz) 2/1A 1L/N/Pe + EO-4010C camera and ueye software Condition: used Weight: approx. 60 kg Bwedjzh D Raepfx Ap Dow Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, BAT Bodpfx Aszkhxtop Deww Shaker Fixture Cube Magnesium Shaker Fixture Cube 400 × 400 × 400 mm Professional fixture cube for vibration test benches, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of magnesium. The fixture cube is suitable for the flexible mounting of test specimens, measuring setups, and fixtures on vibration test benches. The robust magnesium construction offers high rigidity while maintaining a low weight and is used in testing and development laboratories. Technical data: Manufacturer: BAT Material: Magnesium Type: Shaker Fixture Cube External dimensions: approx. 400 × 400 × 400 mm Threaded grid on all sides Several large through-holes for mounting Robust, precision design Equipment: Magnesium construction Precision-machined mounting surfaces Threaded holes on all sides Large corner holes for mounting Suitable for individual test setups Accessories as shown in the pictures Application areas: Vibration test benches Vibration testing Environmental testing technology Automotive Aerospace Research and development Testing laboratories Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Bruker Type: Tensor 27 IR Spectrometer Maximum sample flexibility. Thanks to the improved QuickLock™ mechanism and the locking button on the front, even bulky accessories can be quickly and, above all, safely installed. In addition, the INVENIO can be equipped with three software-controlled beam outputs for a wide range of external modules. FPA micro and macro imaging Variable external sample chamber (left and right) for individual experiments Fiber optic coupling to fiber probes for liquids and solids Integrating sphere Autosampler for liquids High-throughput analysis module HTS-XT Reflection unit for the air-water interface And much more! Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone. Bodpfx Apozh D Nvj Doww

Condition: used, Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete system including LED spotlights & manuals For sale is a complete UV curing system from Dr. Hönle, consisting of two control units and several LED spotlights. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing and laboratory operations. Description: The system includes: Bluepoint LED High-Power control unit (REF 45250.c) Bluepoint 2 easycure control unit (REF 33900.a) Several UV LED spotlights (e.g. 365 nm, air-cooled) Adapter BP-LED 4-1 (REF 45970.a) – for controlling up to 4 spotlights Original operating manuals + CD The devices enable precise control of irradiation time, intensity and energy – perfect for reproducible UV curing processes in industry. Technical data: Bluepoint LED High-Power (45250.c): Supply: 36 V / 5.5 A Control of up to 4 LED spotlights UV intensity adjustable Time programs and energy measurement Bluepoint 2 easycure (33900.a): 230 V AC, 50 Hz 570 VA power consumption High-performance LED controller Industrial quality, Made in Germany Dimensions / Total weight: approx. 12–15 kg Bwodpfx Ajzimamsp Dew Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Bluepoint LED High-Power Bluepoint 2 easycure LED spotlights (air-cooled) Adapter BP-LED 4-1 Operating manuals CD Original documents (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, RMS RMS Electrodynamic Vibration Test System Vibration exciter SW 3006+ Power amplifier TGA 1500 Technical data: Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Displacement pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Bodozd Rvzopfx Ap Djww We will be happy to answer any further questions you may have over the phone.

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Bwedozimaaepfx Ap Dsw Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Binder Type: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven for professional use in laboratories, industry, and research. Device description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The device is specifically designed for applications involving flammable solvents and meets high safety requirements (ATEX version). Due to the precise control of temperature and pressure, the device is ideally suited for reproducible laboratory and industrial processes. Typical applications: Chemical and pharmaceutical laboratories Research & development Quality control Industrial drying processes under vacuum Temperature / Vacuum: Temperature range: +9 °C above ambient to approximately +110 °C Final vacuum: up to approximately 0.01 mbar Electronic temperature and pressure control Equipment: Safety glass pane with splinter protection ATEX-compliant design Several insertion levels (number depending on the configuration) Connections for vacuum and inert gas Dimensions: Internal volume: approximately 115–119 liters Internal dimensions (W × D × H): approximately 506 × 460 × 506 mm External dimensions (W × D × H): approximately 743 × 581 × 942 mm Electrical data: Rated power: 1.90 kW Mains connection: 230 V / 1N~ Current consumption: 8.3 A Frequency: 50–60 Hz Protection class: IP54 Rated temperature: 200 °C Temperature protection: DIN 12880, Class 2.0 Weight (empty): approximately 158 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) Bwodpfx Asziyymjp Dsw (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Rohde & Schwarz Radio Frequency Interference Receiver Type: ESPI3 Frequency Range: 9 kHz to 3 GHz IF Resolution Bandwidths (RBW): 200 Hz (CISPR), 9 kHz (CISPR), 120 kHz (CISPR), 1 MHz, as well as 10 Hz to 10 MHz in 1-3-10 steps CISPR Bandwidths: < 150 kHz = 200 Hz, 150 kHz–30 MHz = 9 kHz, > 30 MHz = 120 kHz Detectors: Max Peak, Min Peak, Quasi-Peak (CISPR 16), Average, RMS Up to 3 detectors can be activated simultaneously Input Attenuation: 0 dB to 70 dB in 10-dB steps Bwedpfx Ajzimlvop Dew Optional Preamplifier ESPI-B2: 9 kHz to 3 GHz, 20 dB gain Noise Figure: approx. 18 dB without preamplifier, approx. 10 dB with preamplifier Start and stop frequency can be set freely Step width can match the reception frequency (harmonic measurement) Display Units: dBm, dBµV, dBµA, dBpW, dBpT Measurement Functions: EMI according to CISPR, APD, CCDF, Continuous and Single Measurement Weight: 1 kg Condition: used Scope of Delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: used, Thermo Scientific   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Single STW150 temperature control system 85°C   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system   Description – Function & Application   For sale is a professional temperature control and drying system consisting of:   Thermo Scientific / Heraeus Forced Convection Drying Oven UT 6200 F Single water temperature control unit STW 150/1-3-10-K5   The forced convection drying oven ensures uniform temperature distribution in the interior and is ideal for drying, heating, and tempering samples, components or materials.   The heating is carried out via the external water temperature control unit (external heater). This achieves a very stable, indirect, and material-friendly temperature control - without local overheating and with homogeneous heat distribution.   Typical applications:   Laboratory & Research Industry & Production Material testing / component drying Tempering, heating, drying at constant temperature Robust laboratory and industrial quality, reliable and durable.   Bwsdoziy D Eopfx Ap Dsw Unit 1 – Forced Convection Drying Oven:   Manufacturer: Thermo Scientific / Heraeus Type: UT 6200 F   Technical data: Max. temperature: 85 °C Operating voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 0.6 A Power: 0.14 kW Protection class: IP20   Dimensions & Weight (approx.) External dimensions: 895 × 816 × 715 mm Interior: 554 × 644 × 503 mm Volume: approx. 180 liters Weight: approx. 100 kg   Unit 2 – Water Temperature Control Unit:   Manufacturer: Single Temperiertechnik GmbH Type: STW 150/1-3-10-K5   Technical data: Heat transfer medium: Water Connection: 400 V / 3~ / PE / 50 Hz Current consumption: 6.9 A Heating power: 9 kW Apparent power: 4.7 kVA Max. temperature: 150 °C   Dimensions & Weight (approx.) Dimensions: 30 × 75 × 60 cm   Weight: 55 kg   Total:   Complete temperature control and drying system Operation together possible (external heating / external heater) Total weight: approx. 155 kg   Important note: "The table shown in the photos is not part of the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by phone.

Condition: used, Binder Safety Vacuum Drying Oven Binder VDL 115 Safety Vacuum Drying Oven ATEX version for potentially explosive areas For sale is a used safety vacuum drying oven Bsdpfx Aeznbm Eop Djww from the manufacturer BINDER GmbH. The vacuum drying oven is suitable for gentle drying, degassing, and conditioning of temperature-sensitive materials under vacuum, as well as for applications with flammable solvents. Technical data Manufacturer: BINDER GmbH Type: VDL 115 Device type: Safety vacuum drying oven Internal volume: approx. 115 liters Internal dimensions: approx. 506 × 460 × 506 mm (W × D × H) External dimensions: approx. 743 × 581 × 942 mm (W × D × H) Weight: approx. 158 kg Temperature range: approx. +9 °C above ambient to +110 °C Ultimate vacuum: up to approx. 0.01 mbar Electronic temperature and pressure control Rated temperature: 200 °C Rated power: 1.90 kW Mains connection: 230 V / 1N~ Rated current: 8.3 A Frequency: 50–60 Hz Protection class: IP54 Temperature protection: DIN 12880 Class 2.0 Item number: 9030-0012 Equipment ATEX version Electronic temperature control Vacuum indicator Digital display Viewing window in the door Stainless steel interior Several insertion levels Connection for vacuum Connection for inert gas Original brief operating instructions on the device Application areas Chemical laboratories Pharmaceutical laboratories Research and development Quality control Material testing Gentle vacuum drying Degassing and conditioning Condition Used Optical condition as shown in the pictures Scope of supply 1x Binder VDL 115 Safety Vacuum Drying Oven Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Zwick / Roell Material Testing Machine / Universal Testing Machine Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 20 kN material testing machine for tensile and compression testing with testControl II & testXpert V3.5 For sale is a used material testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials in the laboratory, quality assurance, research and development. Technical data: Manufacturer: Zwick / Roell Model series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Bwodpfx Apezra Rqe Dew Testing force: 20 kN Testing direction: Tensile & Compression Testing space height: 1000 mm Crosshead speed: 0.0005–1000 mm/min Power connection: 230 V / 50–60 Hz Power consumption: 8 A Electronics: testControl II Software: Zwick / Roell testXpert V3.5 Equipment: Servo-electric material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Test fixture Various connection and cable sets Accessories as shown in the pictures Dimensions and weight: Machine dimensions (approx.): 1244 × 690 × 1324 mm (W × D × H) Weight: approx. 212 kg Application areas: Tensile testing Compression testing Material testing Quality assurance Research & Development Testing laboratory Education and training Scope of supply: 1 × Zwick / Roell Z020 Allround-Line material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Connection and cable sets Further accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Functional scope as shown in the pictures Nameplates are present The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Bsdpozii Awjfx Ap Doww Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN, Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from an industrial setting and has been professionally operated. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Type of test: Tensile and compression test Technical Performance Data: Bodpfozizrkex Ap Djww Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnenn (nominal speed) Displacement resolution: 0.038 µm Positioning repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Data transfer to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working space width: 440 mm Working space height (bottom): 1,050 mm Weight with typical components: approx. 160 kg Electrical Data: Adjustable mains voltage: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current consumption at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented test and calibration records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Temperature during testing: 23.3 °C Displacement measurement system: Incremental encoder (rotary) Force sensor installed 29.01.2014 Force sensor: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force sensor: Xforce P Module: DCSC Rotation before test series: 120° testXpert control system Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measuring module Force sensor Xforce P / Xforce HP Incremental encoder (rotary displacement measurement system) ISO 7500-1 compliant force measurement Installed under the traverse Important Note: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force sensor DCSC module Specimens / Grips Adapters and holders Tools Documentation folder with documents Scope of delivery as shown in the pictures. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, INSTRON Bwodpfozlp Ixox Ap Dsw Spring Testing Machine / Universal Testing Machine SPRING SF1392-E1-L12-SPL Professional 100 kN testing machine for spring, compression, and material testing For sale is a used spring testing machine from the manufacturer INSTRON. The system was designed for highly precise spring, compression, and material testing. It is ideal for use in testing laboratories, research and development, quality assurance, and industrial manufacturing. Technical data: Manufacturer: INSTRON Type: SPRING Model: SF1392-E1-L12-SPL Serial number: SPRGK4348 Year of manufacture: 2007 Testing force: 100 kN Power supply: 240 V AC / 1~ / 50–60 Hz Mains current: 25 A Control voltage: 24 V AC / 50–60 Hz Max. ambient temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door with 0 mm additional opening space Base Extension Model: 2910-061 Weights: Testing machine: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg 5500 Controller: Dimensions (H × W × D): 650 × 280 × 570 mm Weight: approx. 31.8 kg Equipment: 100 kN testing frame Protective enclosure with sliding door Base Extension Model 2910-061 Instron 5500 Controller Operating console Industrial PC Monitor Keyboard Mouse Emergency stop system Testing platens / compression tools as shown in the pictures Technical documentation as shown in the pictures Application areas: Spring testing Compression testing Material testing Component testing Load testing Material testing Quality assurance Testing laboratory Research & Development Scope of delivery: Instron SPRING SF1392-E1-L12-SPL Base Extension Model 2910-061 Instron 5500 Controller Operating console Testing platens / compression tools as shown in the pictures Machine accessories as shown in the pictures Technical documentation as shown in the pictures Important note: To operate the system, the original Instron testing software including a valid software license is required. The software and the software license are not included in this offer. According to the manufacturer, a corresponding retrofit is required for recommissioning. A functional test could not be carried out due to the missing software. The sale is therefore preferably aimed at specialist companies for recommissioning or upgrading. Condition: Used Optical condition according to the pictures. Normal signs of wear and tear are present. The workbench shown in the photos is not part of the sale. The operating console and the machine accessories shown are included in the scope of delivery. Transport information: Original shipping dimensions according to the manufacturer: 2,795 × 1,600 × 1,295 mm (L × W × H) Shipping weight according to the manufacturer: approx. 1,565 kg Loading with a forklift is possible. Shipping via a freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone or email.

Condition: used, LDS Shaker Spare Parts / Vibration Testing System Accessories LDS V8-440 / HBT750C Spare Parts and Accessories Package 30 individual parts – sensors, filters, cables, and mechanical spare parts Mostly individually packaged and visually in new condition For sale is a comprehensive spare parts and accessories package from the inventory of an LDS V8-440 / HBT750C vibration testing system. The collection consists of various spare parts for electrodynamic vibration testing systems, including filter elements, pressure sensors, connecting cables, and mechanical components. Depending on compatibility, the parts are suitable as a stock of spare parts for the maintenance, repair, and servicing of suitable shaker systems. Technical Data / Parts List: Manufacturers / Brands: LDS, BD Sensors, WIKA, and HYDAC Equipment Type: Shaker Spare Parts / Vibration Testing System Accessories Original System Assignment: LDS V8-440 / HBT750C Total Scope: 30 individual parts in 15 positions LDS Filters and Filter Elements: 4x LDS V300232 – Filter mats 25 x 25 mm 2x LDS V500133 – Filter elements for vibrators 1x LDS V500135 – Filter element for HBT sliding table 1x LDS V500131 – Oil filter for LPT 1x HYDAC 1260880 / 0030 D 020 ON – Hydraulic filter Bedpfx Apjz Spt Hs Djww LDS Mechanical Spare Parts: 2x LDS V300089 – Target / Reference element for V8/V895 1x LDS V300087 – Target / Reference element 1x LDS V300135 – Steel bushing / ball joint 1.5 inches 1x LDS V300666 – Steel guide shaft for shaker armature 2x LDS V300122 – Spare parts, exact designation unknown Sensors / Pressure Measurement Technology: 5x BD Sensors DMP 331 – Industrial pressure transmitters 1x WIKA S-2631301 / P.8392006 – Pressure sensor / pressure transmitter Connecting Cables / Wires: 1x LDS V300187 – Electrical connecting cable 1x LDS V300186 – Grounding connecting cable 6x Shaker receiver cables – signal and connecting cables Features / Special Characteristics: Extensive spare parts inventory Original part numbers on numerous packages Several filter elements for vibrators and sliding table Pressure transmitters from various manufacturers Electrical connecting and signal cables Mechanical spare parts for shaker systems Mostly individually packaged components Application Areas: Electrodynamic vibration testing systems LDS shaker systems Maintenance and servicing Spare parts supply Vibration and shock testing technology Hydraulic and pressure measurement technology Industrial testing systems Compatibility: The spare parts package comes from the environment of an LDS V8-440 / HBT750C vibration testing system. Individual packages show additional model designations such as V8/V895, V810, or V850. The actual suitability and compatibility of the respective spare parts should be checked before use using the part numbers and technical data. Condition: Used stock / Used Mostly individually packaged Visually in new or unused condition Functionality testing of the sensors is not documented Optical condition according to images Scope of Delivery: 1x complete LDS shaker spare parts and accessories package 30 individual parts according to the listed parts list Accessories as shown in the images The table or other items not explicitly mentioned in the photos are not included in the sale. Shipping is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, RMS Technical specifications (manufacturer/model type – no guarantee): Peak force: “according to the manufacturer’s specifications” in the range of approximately 10 kN. Max. acceleration: “up to approximately 1,000 m/s²” Max. speed: “typically in the range of approximately 1 m/s to a few m/s” Components: Control cabinet TGA 022/3 Vibration exciter SW 6507 Power amplifier TG D 9000-000.00 Fan Condition: used Scope of delivery: Vibration testing system as shown in the picture Bjdpezikc Sofx Ap Djww (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. Bwjdpfx Apszii Dne Djw International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, EOS / Transitube Powder conveying system / dosing system EOS Transitube DCL 800/30 PM Automatic powder conveying and dosing system for two components For sale is a used powder conveying system from the manufacturer Transitube / tim plast Anlagenbau GmbH. The system is used for the continuous dosing, conveying, and homogenization of powders, ground materials, or granules and is ideally suited for plastics processing, extrusion, and injection molding. Technical data: Manufacturer: transitube / tim plast Anlagenbau GmbH Type: DCL 800/30 PM Designation: EOS powder conveying system Dosing system for 2 components 2 material containers, each approx. 400 liters Continuous dosing and mixing Materials: Powder Granulate Ground material / regranulate Power connection: 3/N/PE 400 V AC Frequency: 50 / 60 Hz Connected load: 2.0 kW Weight: approx. 180 kg Dimensions (approx.): Width: 1850 mm Depth: 900 mm Height: 1320 mm Dosing capacity, model-dependent: approx. 50 to 2,000 kg/h Dosing accuracy: ±0.5 to ±2 % Dosing range: 5 to 50 % Additive dosing: 0.2 to 10 % Equipment: 2 dosing containers with hinged lids Automatic control cabinet with touch panel Transitube conveying and mixing system Electrical control Screw dosing Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Various conveying hoses Piping Accessories as shown in the pictures Application areas: Plastics industry Extrusion Injection molding Powder conveying Material dosing Regranulate dosing Mixing systems Production automation Condition: Used Visual condition as shown in the pictures. Scope of delivery as shown in the pictures. Scope of delivery: 1x EOS Transitube DCL 800/30 PM powder conveying system Complete control cabinet Conveying units Motors Pneumatic components Hoses Piping system Accessories as shown in the pictures Important note: The system is sold as shown in the pictures. Please note the scope of delivery in the photos. Bwodjzn H D Nspfx Ap Dow Tables, tools, or other aids that may be visible in the pictures are not included in the scope of delivery unless explicitly stated. Shipping via freight forwarder is possible. Inspection is possible at any time by appointment. Subject to prior sale and errors. If you have any questions, please do not hesitate to contact us by telephone.

Condition: used, Weiss   Type: WT-600/70   Weiss Temperature Test Chamber, Water-Cooled   Technical Data: Test chamber designation: WT-600/70   External dimensions with hinges and door closure Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door closure Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions:   Height 950 mm, Width 800 mm, Depth 800 mm   Test chamber volume: approx. 600 liters   Cooling / Heating operation -70°C to 180°C   Temperature change per unit of time Cooling down approx. 2.5 K/min Heating up approx. 4 K/min   3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on customer side: 32 A, slow-blow Permissible test item weight Total load of the shelf supports 80kg   Test chamber floor 80kg, insert shelf 40kg   Refrigerant: R 404A/R23   Weight: 675 kg   For your safety as a buyer, please note the following information!   Bodszd R Drspfx Ap Dsww The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, FRT MicroSpy Device Designation: FRT MicroSpy Mobile Art. No. MSP 105 00 Device Number: MSP1033 FRT MicroSpy Mobile Portable Optical Profilometer for non-destructive 3D surface measurements directly on the component. Due to its portability, the MicroSpy Mobile is ideally suited for mobile use on large machines, vehicles, rollers, glass panes, or other large components. This enables high-resolution and non-destructive measurements on-site to determine important characteristics of surfaces, such as roughness, contour, topography, layer thickness, wear, load-bearing capacity, or volume. Smaller samples can be measured directly on the measuring table. Usable on large construction and machine parts Excellent resolution values Excellent reproducibility Non-destructive measurement Handles and adjustable support feet Low weight (approx. 5 kg) FRT Technical Specifications: Device: MicroSpy Mobile xy-travel range: 50 x 50 mm² xy-table Type: compact XY cross table with open frame Bearing: mechanical crossed roller guide Drive: DC motor with ball screw Travel range (XY measuring range): 50 x 50 mm² (or 20 x 20 mm² with CWL 3mm) Position measuring system: rotary encoder Measuring system resolution: 0.25 µm XY repeatability: < ± 1 µm Table height deviation (per axis): < 2 µm / 50 mm (of which is not reproducible): < 0.5 µm XY squareness: < 4 µm / 50 mm z-axis, motorized: Type Position Drive Travel range Position measuring system Measuring system resolution Axis straightness Gross adjustment, manual: Type: dovetail guide with fine drive Adjustment range: 25 mm Measurement: Minimum point spacing xy: 1 µm Sample size: - Sample weight: - Min. measuring speed: 1 µm / sec Max. measuring speed: 50 mm / sec Overall system: Total weight: approx. 150 kg of which measuring unit: approx. 5 kg Footprint measuring unit: approx. 0.3 x 0.3 m² Dimensions controller (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Voltage supply EU version: 110 - 240V, 50 - 60Hz, z 16A Voltage supply US version: 110 - 240V, 50 - 60Hz, z 16A Power consumption: typ. 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Environmental conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel range 1 x Mobile base with electronics 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for rear door 1 x Power cord for power supply 1 x Mouse (PS/2) 1 x Keyboard Bwsdpfx Aozdnqcep Djw 1 x 19'' TFT monitor Type: FRT MicroSpy Mobile Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.