Used Length Measuring Device for sale (41,931)

Condition: good (used), For sale is a universal length measuring device with numerous accessories from the brand Helios, in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Helios Messtechnik • Type: 27 773 001 • Control model: Unitron 2 CHA • Universal length measuring device / adjustment device / shaft measuring device • With numerous accessories for various measurements • Mounted on a workshop trolley with contents (See pictures) • Condition: Used, functional (The cable or connector of the control unit would need to be replaced, presumably not original; the display turns off after a few seconds) Fedpfxezxiv Ne Aikspp Shipping costs via freight forwarder: approx. €140 International buyers are welcome! You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Subject to errors in technical data and prior sale.

Condition: new, HEIDENHAIN Incremental encapsulated length measuring system LS 187 – ID 526971-09 New HEIDENHAIN length measuring system, unused. The original packaging was opened solely for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LS 187 ID Number: 526971-09 Device type: Incremental encapsulated length measuring system Measuring length: 940 mm Accuracy class: ±5.0 µm Pitch period: 20 µm Output signal: 1 Vpp Fodpfx Aiszcgy Uskspp Reference mark: In the center of the measuring length Mounting type: Integrated mounting strip Supply voltage: 5 V ±5 % Electrical connection: Flange housing, 14-pin, separate adapter cable

Condition: used, Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production Fsdpfsgal A Djx Aikspp -Length measuring device: used for slats/blinds production -Rotary encoder: Heidenhain ROD 426.003 - 1000 -Pneumatic components: Manufacturer Festo -Dimensions: 350/400/H1130 mm -Weight: 80 kg

Condition: new, Year of construction: 2026, Length measuring device ASB ----- Fpodjzr U Nbopfx Aikjp - Freely selectable setpoint - Switchover from absolute to relative measurement - Easy readability thanks to digital display - Automatic display shut-off - Low installation effort Technical data Length measuring device ASB Measuring range: ASB: 1,000 mm - 6,000 mm Accuracy: +/- 0.1 mm over 3,000 mm Resolution: ± 0.01 mm

Condition: ready for operation (used), Hommel Opticline Contour 414 Wave Measuring Instrument, Measuring Device, Wave Measuring Machine Fpodpjzz Huuofx Aikop Max. measuring diameter: 140 mm Max. measuring length: 300 mm Resolution: 0.1 µm Measuring accuracy (diameter): (1.0 + D/200) µm Measuring accuracy (length): (2.6 + L/200) µm Repeatability (diameter): 0.3 µm Measuring speed: automatic, 10–80 mm/s Positioning speed: up to 200 mm/s Rotational speed: 1 rotation/s Description has been copied. You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are reserved.

Condition: ready for operation (used), Hommel Opticline Contour 414 Wave Measuring Instrument, Measuring Device, Wave Measuring Machine Max. measuring diameter: 140 mm Max. measuring length: 300 mm Resolution: 0.1 µm Measuring accuracy (diameter): (1.0 + D/200) µm Measuring accuracy (length): (2.6 + L/200) µm Repeatability (diameter): 0.3 µm Measuring speed: automatic, 10–80 mm/s Positioning speed: up to 200 mm/s Fpodpfozmwg Ssx Aikep Rotational speed: 1 rotation/s Description has been copied. You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are reserved.

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Fsdpfoz Slirjx Aikopp

Condition: ready for operation (used), Helios Preisser length measuring machine, measuring machine, measuring device with camera system Length x width: 1350mm x 270mm Accuracy class: Grade 0 Flatness: Actual - 5.9 µ; target - 10 µ Weight: 109 kg PC, printer, camera system, keyboard, mouse. Digital display has been checked. You are welcome to visit us for an inspection. You will receive a proper invoice. Fsdpeiwxwhofx Aikepp For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: P.N. IP.A415.00 M2333Y, ATEQ F600 – the leak testing device for industrial quality control. Fodpfxjzhmn Io Aikjpp Achieve precise leak measurements with the ATEQ F600, an indispensable instrument for professionals in the fields of electronics and measurement technology. This high-quality leak testing device is characterized by its robust design and the precise recording of measurement values, making it ideal for maintenance tests and diagnostics. With its intuitive operating concept and the rapid display of results, the ATEQ F600 is a true asset for any workshop or laboratory.

Condition: good (used), Year of construction: 2019, Volume measuring device including weight detection for master data acquisition, Bosche – used: Price ex works: now only €5,950 instead of €8,500 (net)! Fjdpexqffdjfx Aikjpp Manufacturer: Bosche Wägetechnik Type: zippcube Should be size M Serial No.: Z201900158 Year of manufacture: should be 2019 Max. 50 kg 16-20 V/DC Weight of scale: 110 kg With HMI 12 display Combined volume and weight detection in a single pass Ideal for master data acquisition with space requirement measurement New price: approx. €20,000 (net) zippcube M | Volume and weight detection up to 50 kg. Robust design, precise load cells and intuitive software for efficient logistics. Condition: good Available: immediately Location: Biberach

Condition: ready for operation (used), functionality: fully functional, controller model: Rexroth CNC-Steuerung, working width: 1,330 mm, sheet thickness (max.): 3 mm, straightening roller diameter: 100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sheet thickness: 0.7–3.2 mm Working width: max. 1,330 mm Number of straightening rollers: 5 Fedpfxo Af Hdzo Aikepp Straightening roller diameter: 100 mm Number of feed rollers: 2 Feed roller diameter: 100 mm Coil inner diameter: 530–610 mm MACHINE DETAILS Control system: Rexroth CNC control (for length and quantity) Drive type: Hydraulic Dimensions & Weight Machine weight: 9,500 kg Installation length: 6,500 mm Installation width: 3,300 mm EQUIPMENT Uncoiler: Metform, 5 t Coil loading cradle Shear: Morgan PG1500-3.2

Condition: used, HELMUT FISCHER X-ray fluorescence measuring device / coating thickness measuring device FISCHERSCOPE X-RAY XDL-XYZpT8 Professional X-ray fluorescence measuring system for coating thickness and material analysis For sale is a used X-ray fluorescence measuring device from the manufacturer Helmut Fischer GmbH + Co. KG, Germany. The FISCHERSCOPE X-RAY is suitable for non-destructive coating thickness measurement and material analysis using X-ray fluorescence (XRF). The system is designed for measurements of functional coatings, corrosion protection coatings and various metallic coatings and is used in quality assurance, laboratories, research and manufacturing. Technical data: Manufacturer: Helmut Fischer GmbH + Co. KG Model: FISCHERSCOPE X-RAY Type: XDL-XYZpT8 Serial number: SN010002436 Made in Germany CE marking present Measuring system: X-ray fluorescence measuring device (XRF) For non-destructive coating thickness measurement Suitable for functional coatings and corrosion protection coatings Large measuring chamber with C-slit Standard X-ray tube Proportional counter Fixed aperture and fixed filter DCM travel 0–80 mm Electrical data: Supply voltage: 230 V AC Frequency: 50–60 Hz Power consumption: 120 W Connections: Mains connection Serial interface (Sub-D) Other connections as shown in the pictures Equipment: Helmut Fischer FISCHERSCOPE X-RAY measuring device Measuring chamber with protective cover Software Operating manual Other accessories as shown in the pictures Application areas: Coating thickness measurement Material analysis X-ray fluorescence analysis (XRF) Quality assurance Electroplating Surface technology Material testing Laboratory Research and development Fedoz Egi Rspfx Aikspp Scope of supply: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Software Operating manual Scope of supply as shown in the pictures Condition: Used The device comes from a warehouse clearance. Optical condition as shown in the pictures. Important note: The device has not been tested by us and is explicitly sold untested and without warranty. The table shown in the photos or other items not explicitly mentioned are not part of the sale. Due to its size and weight, shipping is possible by forwarding agent. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2009, Mahr MarSurf CD 120 Contour and Roughness Measuring Instrument, Surface Measuring Instrument Measuring range: 120mm Fpodjzmtlqopfx Aiksp Measuring force adjustable from 2 mN to 120 mN Mahr ST 500 measuring stand Year of manufacture: 2009 Accessories: Contour measuring probe: Mahr PCV probe arm 350 Roughness measuring probe (software license for roughness measurement has expired) Mahr calibration standard Mahr cross slide table You are welcome to come and inspect the equipment. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. Fjdpfx Aeh Aw Rneikspp As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: ready for operation (used), Mahr Marsurf XR 1, Marsurf SD 26 roughness measuring instrument, measuring instrument, granite measuring plate Mahr Marsurf XR1 with Marsurf SD 26 feed unit: Measurement of roughness, waviness, and profiles Measuring range: ±250 µm Measuring range with longer stylus arm: up to ±750 µm Vertical resolution: up to 0.7 nm Measuring length: 26 mm Feed speed: 0.1–1.0 mm/s Positioning speed: 5 mm/s Motorized height adjustment: 7.5 mm Measuring force: approx. 0.7 mN Cut-off: 0.08 / 0.25 / 0.8 / 2.5 / 8 mm Individual measuring lengths: 1–50 Evaluation: Roughness, waviness, and profile Measured parameters: including Ra, Rq, Rz, Rt, Rp, Rv, RSm, Rsk, Rku, Rk, Rpk, Rvk Software: MarWin Measuring stand: MarSurf ST-D Measuring plate Dimensions: 600mm x 500mm Brand: Bilz Type: F60-50 Max. load capacity: 130 kg Fpjdpfx Asz H Ukloiksp You are welcome to visit us for an inspection. We will gladly arrange a cost-effective shipping service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Garant HC 1 Height Measuring Device Measuring range: 600mm Dimensions: 240mm x 250mm x 1000mm (L x W x H) Weight: approx. 30 kg Calibration standard is not included in the scope of delivery. For further technical data, please refer to the images. You are welcome to arrange a viewing appointment. We are happy to organize affordable shipping for you! Fpodpjxv Ampjfx Aikjp You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and browse our other listings. All brand names and trademarks mentioned are the property of their respective owners and are used for identification and descriptive purposes only. Technical data may vary and errors in the description of the item are possible and reserved.

Condition: ready for operation (used), Hommel Etamic W20 Jenoptik Waveline Roughness Tester, Measuring Device (562) Measuring range: max. 20 mm Measuring span: ± 300 µm Fjdpfszyqzcox Aikspp Accessories: Tripod Granite measuring plate PC You are welcome to visit us for an inspection. We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, overall weight: 579 kg, year of last overhaul: 2024, Equipment: documentation/manual, lighting, type plate available, Mitutoyo QVT1-X404P1L-D 3D CNC Multisensor Measuring Machine Enhanced application possibilities through the combination of tactile and non-contact measurement. Fsdpfx Aio Afdr Askjpp Powerful CNC-controlled system for intelligent, simple, and fully automatic measurements. Multiple image processing filter functions ensure reliable results. Flexible switching of probe tip configurations with the MCR20 probe head changer. White LED transmitted light. White LED coaxial light. Programmable 4-quadrant LED ring light. Triangular pattern focusing for low-contrast surfaces. Programmable magnification changer with 1x, 2x, and 6x magnification. High-resolution CCD black and white camera. Resolution: 0.0001 mm "One-Click Tool" technology for optimal edge detection.

Condition: used, Mahr Type: Helio-Pan II 700 Helio-Pan II Max. workpiece weight 30 kg at center height 100 mm 80 kg at center height 150 mm Measuring range, length: 0 mm to 700 mm Measuring range, outer diameter: 0 mm to 120 mm Max. measurable runout: 100 mm Center height: 100 mm Measuring probes: probe and measuring slide, 1 mm x 5 mm Fpjdpfszd R U Dex Aiksp Dimensions (W x D x H) Machine: 2060 mm x 920 mm x 1750 mm Controller box: 600 mm x 800 mm x 2200 mm Weight: approx. 900 kg Electrical power: 230 V / 1200 W / 50 Hz Air pressure: 6 bar Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2020, operating hours: 450 h, functionality: fully functional, total height: 400 mm, total width: 800 mm, total length: 800 mm, travel distance X-axis: 5,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 5,000 mm, overall weight: 50 kg, repeat accuracy: 0.01 mm, Equipment: documentation/manual, KEYENCE WM-3000 Mobile 3D Coordinate Measuring System, Year of Manufacture 2020 For sale is a mobile 3D coordinate measuring system, KEYENCE WM-3000, year of manufacture 2020. The WM-3000 enables flexible and precise 3D measurement of components directly in production or at a testing station. Thanks to the optical tracking technology and the wireless measuring probe, the system is particularly suitable for dimensional accuracy checks and for comparing the actual and target dimensions of complex components. Technical data: Manufacturer: KEYENCE Type: WM-3000 Year of manufacture: 2020 Mobile 3D coordinate measuring system Measuring range: 5,000 mm Measuring accuracy: approx. ±28 µm Repeatability: up to approx. 10 µm Optical 3D measurement Wireless measuring probe Supply voltage: 220 V Fpsdpfjz Aynksx Aiksp Weight: approx. 50 kg External dimensions: approx. 800 × 800 × 400 mm Suitable for: 3D dimensional inspection Quality control Actual vs. target comparisons Measurement of complex components Use directly in production The device is offered as used. Condition and scope of delivery, see photos or upon request. Subject to technical changes and errors.

Condition: new, New HEIDENHAIN length measuring system. The original packaging was opened solely for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LC 183 Device type: Absolute encapsulated length measuring system Measuring length: 540 mm Accuracy class: 5.0 µm Measuring method: Absolute Fsdpfx Aijzcgybokopp Data interface: EnDat 02 Measuring step: 10 nm Pitch: 20 µm Electrical connection: Flange box, 14-pole Mounting type: Integrated mounting strip Available quantity: 4 pieces

Condition: new, HEIDENHAIN length measuring system LC 182 – measuring length 940 mm New HEIDENHAIN length measuring system. The original packaging was only opened for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LC 182 Device type: Absolute length measuring system Measuring length: 940 mm Measuring step: 0.001 µm Accuracy class: ±3 µm Mounting type: Clamping Scanning principle: Single-field scanning Fpsdezcgwmspfx Aiksp Protection class: IP53 Supply voltage: 5 V DC ±5 % Output signal: 1 Vss

Condition: new, HEIDENHAIN length measuring system LC 183 – measuring length 540 mm New HEIDENHAIN length measuring system. The original packaging was only opened for taking photographs. Manufacturer: HEIDENHAIN Type: LC 183 Device type: Absolute length measuring system Measuring length: 540 mm Scanning principle: Single-field scanning Measuring method: Absolute Output signal: EnDat Mounting type: Clamping Fsdpfxszcgxwo Aikspp Protection class: IP53 Available quantity: 3 pieces

Condition: new, New HEIDENHAIN length measuring system. The original packaging was opened solely for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LS 486C Device type: Incremental, encapsulated length measuring system Measuring length: 1020 mm Measuring method: Incremental Output signal: 1 Vpp Pitch period: 40 µm Scanning principle: Single-field scanning Protection class: IP53 Mounting type: Clamping mounting Fodpfx Aiszcgz Eokspp

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. Fedpfx Aiep Stgnekjpp As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;