Used Sound Wall for sale (7,138)

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- Hodpfx Aksz Eq Epeijw MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Hodpfxjzp Nt As Akiew Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Robust, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Hodpezhx A Rofx Akijw Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg - immediately available -

Condition: used, functionality: fully functional, machine/vehicle number: WDB4371251W199327, mileage: 318,533 km, power: 177 kW (240.65 HP), first registration: 07/2002, fuel type: diesel, empty load weight: 7,300 kg, overall weight: 7,500 kg, tire size: 395/85 R 20, axle configuration: 4x4, brakes: engine braking, color: white, gearing type: mechanical, number of seats: 3, total length: 7,170 mm, total width: 2,410 mm, total height: 3,500 mm, permissible axle load (axle 1): 4,400 kg, permissible axle load (axle 2): 4,400 kg, Year of construction: 2001, operating hours: 4,765 h, Equipment: ABS, parking air conditioner, Unimog U1550L Expedition Vehicle First registration: 07/04/2002 Mileage: ≥ 318,000 km Operating hours: ≥ 4,700 h Total weight: 7,500-8,500 kg depending on load Engine: 176kW / 240 hp, Euro 2 Tires: 395/85 R 20 - Michelin Asking price: €139,800 Special equipment Unimog: A27 Double sealing of wheel hub, for use in muddy conditions A30 Tire pressure control system A31 Wheel-side, wheelbase-dependent parts for tire control B02 ABS B28 Mechanical quick-release device for spring storage cylinders C22 STABILIZER SEAL FRONT AND REAR C34 Anti-slip coating on bumpers D65 Mounting parts for external superstructures E35 Circuit breaker instead of fuse F06 Higher cab roof (by 120mm) F44 ADDITIONAL VENTILATION F50 SOUND AND HEAT INSULATION FOR CAB G22 Auxiliary gearbox with off-road gear G50 Transmission oil cooler G73 SHIFTING DAMPER (SHIFT LEVER - TRANSMISSION) H02 Single-circuit hydraulic system H11 HYDRAULIC SYSTEM 1-CELL H71 HYDR. PLUG-IN CONNECTION FRONT 2-WAY, CELL 1 J24 Tachograph, 2 drivers, outside EU J29 Speed-dependent engine speed compensation (measurement result / warning sign) L02 Outline lights to the front, white L18 Fog lights, halogen, suitable for wading L25 Rear fog light L30 Stone guard grille for headlights L30 Headlight stone guard L35 Headlight beam adjustment L41 ADDITIONAL TURN SIGNALS L71 Side marker lights with integrated reflectors M02 EURO II ENGINE M03 Increased engine power M31 AIR COMPRESSOR WITH HIGHER OUTPUT M53 Fuel preheating M78 Engine number stamping M86 PULLEY AND VIBRATION DAMPER WITH COMBINATION RING M91 ELIMINATION OF START PILOT R27 Disc wheels 11x20 super S21 Three-point automatic safety belts S26 Windshield electrically heated, laminated glass S26 Electrically heated windshield, laminated glass S39 Power windows (left and right) S46 2 Outside rearview mirrors, heated, electrically adjustable S50 First-aid kit S82 Wide-angle mirror S83 Ramp mirror X18 Increased load capacity level UNICAT Expedition Mobile Superstructure: - Pneumatically sprung Recaro seats, adjustable, heated and ventilated - Robust GRP box body, wall thickness approx. 60–100 mm, waterproof and dustproof; designed for temperatures from -40 °C to +40 °C - Four-chamber fuel tank system with a total of 560 liters of diesel - Solar system on the roof and extensive on-board electrical system with a central control panel - 310 l fresh water tank, 80 l waste water tank, 22 l hot water boiler via heat exchanger and drinking water filter system - Kitchen with refrigerator, freezer, sink, hot and cold water, three-burner propane stove, oven and storage compartments - Sleeping area with a double bed, cabinets, mirror, reading light and storage space - Bench seat, can be converted into an additional sleeping space for a third person Hedpfx Aoz S Ni Iokisw - Bathroom with porcelain toilet and flushing, washbasin, mirror cabinet and shower - Outside shower and outside water connection - Awning - Rear bicycle carrier, roof rack with spare wheel - Additional front headlights with protective grille - Winch at the front and rear - Ball hitch K50 Offer subject to change. Errors, changes and prior sale are reserved. All information without guarantee. Our general terms and conditions apply. Location: Peter Meineke GmbH Becklinger Straße 17 29683 Fallingbostel Viewings and/or test drives only by prior appointment. Please coordinate by telephone before arriving, as the vehicle/device may not be at the specified location. Contact: Ewgeni Schneider Mobile: +49 (0) 173 / 9903073

Condition: excellent (used), Year of construction: 2007, Striebig Panel Saw Compact 5220, Year of Manufacture 2007 Solid, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Hsdpoz N Igaefx Akisw Robust mounting of the motor carriage ensures high cutting precision Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grids Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 hp) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4300; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: In stock, 54634 Bitburg - immediately available -

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Hsdpfx Ajxbgrgekiow Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio

Condition: used, mileage: 251,000 km, power: 170 kW (231.14 HP), first registration: 03/2001, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, color: yellow, gearing type: mechanical, emission class: euro3, total length: 9,050 mm, total width: 2,550 mm, total height: 3,300 mm, loading space length: 6,000 mm, loading space width: 2,520 mm, Year of construction: 2001, Equipment: ABS, air conditioning, crane, German vehicle, recently in service, deregistered 06/2026. For many years, it was personally driven by the owner of a small business. It can and does pretty much everything that was feasible in the 12-ton class at the time. TISCHER sliding platform BAVARIA 4000. Platform length: 6.00 m, of which approximately 5.50 m is usable. Platform width: 2.52 m, of which approximately 2.35 m is usable as a flat surface. Platform height in driving condition approximately 1.20 m. Winch: SUPERWINCH H8G, can be moved laterally, all functions controlled by remote control. 3630 kg pulling force. Year of manufacture 2014. Tow hitch / towing eye TISCHER for passenger cars. Crane: HMF 1112 T4 from 2001 with 4010 kg lifting capacity at 2.7 m and 970 kg lifting capacity at 9.9 m (complete load chart can be found in the vehicle photos). Accessories: Lifting equipment and heavy "gallows" with hydraulic adjustment cylinder for free-floating load balancing, wheel chocks, wooden planks, shovel/broom. 2 auxiliary start sockets (each for 12 volts and 24 volts). Several plastic storage boxes. Chassis: Mercedes Atego 1223 L. 4760 mm wheelbase. Front leaf and rear air suspension, raise/lower function. Both trailer couplings: Large RINGFEDER pintle hitch with air connections and 16000 kg trailer load capacity for turntables or 13000 kg trailer load capacity for tandem trailers. Ball hitch with a maximum of 3500 kg trailer load capacity. Traction chains can be engaged as an aid for starting in winter (RUD). 6-cylinder in-line diesel engine OM906LA with 231 hp, Euro 3, starts and runs perfectly. 6-speed manual transmission. Fast axle ratio 119 km/h (it is VERY fast). 3 seats. Air conditioning. Radio, CB radio, telephone preparation. Rear view camera with monitor. Hydraulically tilting short cab (S-cab with extended rear wall). Hjdpfxezfdgpo Akiew Registered as a "truck for vehicle transport". Entry in the registration documents: "The vehicle is suitable as a breakdown assistance vehicle within the meaning of §52(4)No.2 StVZO". Overall vehicle dimensions: Length: 9.05 m, Width 2.55 m, Height 3.30 m. Unladen weight according to vehicle documents 9390 kg, it weighs so much because the truck is extremely robustly built in solid TISCHER quality. Permissible total weight: 11990 kg. Therefore, the payload is 2600 kg. The truck runs very well and it is enjoyable to drive. The chassis is very clean. There is some rust on the cab. The windshield has a small crack at the bottom. The Atego has a valid TÜV (technical inspection) until 02/2027 (according to the registration certificate) and emission test until 08/2026 (according to the inspection sticker on the back of the cab), however, the necessary documents for re-registration are missing, and due to the closure of the last owner's business, it is not possible to obtain these documents as duplicates. The registration documents I and II are of course original and immediately available. There are 2 original Mercedes main keys, both keyed alike for both doors and the ignition lock. Some old documents such as spare parts lists from Tischer and a second remote control for the winch are still available and will be given to the buyer. The Atego was used as a recovery vehicle / tow truck until recently. 2 complete spare wheels as shown are also included. The Atego also has an air horn with chrome trumpets, which sounds very impressive. 2 new batteries were installed in 2026. The 1223 L is immediately available. This

Condition: used, mileage: 90,616 km, power: 177 kW (240.65 HP), first registration: 03/1998, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,400 mm, total height: 3,170 mm, Year of construction: 1998, Equipment: ABS, compressor, Mercedes-Benz 1524 with METZ DLK 23-12 PLC II aerial ladder – Registered: 05.03.1998 Mileage: 90,616 km Operating hours: 3,626 hours Base vehicle equipment: * Suspension type: leaf spring rear axle * Wheelbase: 4250 mm * Permissible gross vehicle weight: 15 t * 7-speed manual transmission * Fuel tank: 127 l, located under the platform at the rear * Differential lock in rear axle * Stiffer rear springs and shock absorbers * Front spring: torsion bar, reinforced stabilizer and shock absorbers * Co-driver's double bench seat * Exhaust pipe for fire department, positioned in front of the front axle * Engine brake * Anti-lock braking system (ABS) * Traction control system (ASR) * Fog lights * Hour meter * Headrest for driver * 2 headrests for co-driver Hjdpfjxa Sbwox Akijw * Cab rear wall with 2 windows * Electric window lifter on the right * Heated and electrically adjustable rear-view mirror with wide-angle mirror * Ramp mirror on the right * Rotating beacon, blue light, and siren * Front flashing blue light Aerial ladder equipment: * Metz aerial ladder DLK 23-12 PLC III with rescue basket (rescue height approx. 30.75m) Max. outreach angle: 75 degrees, Max. basket load capacity: 270 kg, Nominal rescue height: 23m, Nominal outreach: 12m, Outrigger system: horizontal-vertical, Variable outrigger width between 2,400mm and 4,500mm * Folding rescue basket for 3 people * 2 LED spotlights 24V at the front of the rescue basket * Load eye at the top of the lower ladder, on the reinforced ladder support, for lifting, lowering and pivoting loads * Mounting bracket for portable generator 5kVA on the turntable * 2 halogen spotlights 24V / 70W at the head of the lower ladder with Teleflex control from the main control station * 400V power supply, protected in the ladder support, to the top of the upper ladder including socket and power supply with plug from the generator on the turntable * Bridge cable from the head of the upper ladder to the rescue basket with 1 socket 400V and 2 sockets 230V in the rescue basket * Fixed water line in the lower ladder * Adjustable spray nozzle, mountable in the rescue basket * Storage for adjustable spray nozzle * METZ stretcher holder SLK 111 including storage on the platform * Box for storing the stretcher in the platform * Siren with 4 sound cups instead of BOSCH high-tone horn * Fixed charger 230V / 24V * Service booklet available, all maintenance performed annually ----Ready-to-drive vehicle from first owner, ladder system only works sporadically - defects present! Non-smoking vehicle! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also Whatsapp Email: Subject to changes, prior sale and errors!

Condition: used, The Compact Series The new Wanner shredding mills in the C series (“C” stands for “compact,” “s” stands for “silent,” meaning noise-optimized) offer practical solutions for almost all challenges related to in-line recycling of sprues and defective parts in the production process. Thanks to their modular design, the shredding mills in the C series can be easily adapted to the specific application or the needs of the operation. Depending on the method of feeding the sprues, the disposal of the ground material, or the injection molding machine being used, the C series from Wanner offers optimal solutions that can be adapted to your specific operational processes through a variety of standard components. The optimized cutting geometry and low rotor speed guarantee high-quality ground material with a low dust content. Sound-insulated feed hoppers and the noise-optimized shredding chamber design contribute to a low noise level with regard to structure-borne noise and natural frequency. The large-sized gearbox ensures a long service life for the shredding mills and also allows for extremely compact dimensions. The shredding chamber can be opened very easily with just a few steps, which saves time and thus costs, for example, during cleaning due to a change of color or material. The advantages of the C series: easy adaptation to the specific application through a modular system compact design requires only a small footprint next to the injection molding machine robust, cast/steel housing mounted on swivel casters durable motor/gearbox unit for a long service life significantly reduced noise through angled-cut rotor and vibration-optimized shredding chamber design easy handling and simple cleaning, saving time and costs improved feeding behavior of bulky sprues and ground parts thanks to the optimal rotor geometry shredding chamber with hardened inserts for minimal wear with GF materials high-quality and low-dust ground material thanks to the optimized cutting geometry. The rotating disc in the side wall reduces friction and thus heating and damage to the ground material. blades can be easily re-sharpened without a special device sound-insulated and tamper-proof feed hoppers Technical data: Hjdezc Nydepfx Akijw Manufacturer: Wanner Type: C17.26sv Shredding chamber opening: 170 x 260 mm² Rotor diameter: 170 mm Rotor blades: 12 Stator blades: 2 Throughput: 20-25 kg/h Screen size: 3-8 mm Voltage: 400 Volt/ 50 Hz Suction container: approx. 6 l Suitable for GF materials as standard Control: Contactor control with overcurrent protection switch electrically redundant design with self-monitoring safety relay according to EN 12012 5 m connection cable Weight: 155 kg Year of manufacture: Product video “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” You can find more new and used items in our shop! International shipping costs on request!

Condition: like new (used), GIF Kitchen Ventilation Ceiling Ventilation Ceiling System The optimal solution for kitchen ventilation, commercial kitchens, and the food industry. The best alternative to extractor hoods GIF kitchen ventilation ceilings are installed in: • Company canteens • Hospitals, clinics • Restaurants / hotels • Retirement homes, homes for the disabled, and children • Military accommodations, field kitchens • University cafeterias, school kitchens • In-flight catering • Correctional facilities • Public facilities Patented quality – Made in Germany The GIF kitchen ventilation ceiling is a complete, wall-to-wall, surface-active solution including large-area exhaust and supply air panels, lighting, and compensation surfaces with an installation height of just 200 mm. The use of the ceiling cavity as a pressure chamber in accordance with VDI 2052 enables implementation as an "open" or "closed" system, always maintaining the largest possible proportion of air-active surfaces. The large-scale capture of frying, cooking, and other fumes, as well as the large-scale, low-turbulence supply air intake, guarantee a comfortable climate free from condensation and drafts. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. On the supply air side, the GIF active cassette ceiling is used for low-turbulence, large-scale supply air intake according to the stratified flow principle. An energy-efficient solution is thus standard. The special design ensures indirect supply air guidance, even for high air volumes at low inlet velocities, without an induction pulse. Since the active cassettes are identical in the exhaust and supply air areas, they can be interchanged at will. Hodpfx Ast Hglkjkisw Facts and Benefits Complies with or exceeds current guidelines (VDI 2052, VDI 6022, EN 16282), including accessibility to underlying components (no access openings required). Durability of the material: CNS 1.4301 Integrated deflection system for rapid pulse reduction Economical and hygienic cleaning of only 4 parts per m² in the dishwasher Pulling and pushing of the active cassettes in the support profiles makes them easy for anyone to remove without tools Partial cleaning possible as needed No need to climb onto greasy, hot kitchen appliances (risk of slipping) HACCP-certified process Technical Specifications Exhaust Air Air flow rate: 260-300 m³/h m² Separation efficiency: up to 97% Dimensions: 500×485 mm Pressure drop: 20-25 Pa Material/Surface: CNS Material No. 1.4301 Weight per m2 without support structure: 10.00 kg Draft air flow: 360-500 m3/h m2 Dimensions: 500×485 mm Pressure drop: 25-30 Pa Material/Surface: CNS material No. 1.4301 Weight per m2 without support structure 10.00 kg Airflow velocities: less than 0.2 m/s Ceiling area: 6500 x 3000 mm 19.50 m² 300 supply air flat ceilings, 250 x 485 mm 200 supply air flat ceilings with sound absorption, 250 x 485 mm 220 active cassette ceilings, 500 x 485 mm 14 system support profiles, 6500 mm 7 system support profiles, 2000 mm Lighting fixtures installed flush with the ceiling in the GIF ventilated ceiling Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic material to rectangular glass panes within a production line for solar modules. The material forms a seal to a second glass pane, which is applied in a later process step. The panes are fed in, the material is applied, and the panes are removed on horizontally running belts/conveyors. The thermoplastic applicator is a highly advanced machine that must meet many requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on the following pages. This helps to achieve a high-quality and safe production. Performance and Connection Values Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant bead: 0.5 to 1.2 mm Maximum width of the applied sealant bead: 12.0 mm Required constant inlet pressure, pneumatics: 6.5 to 8.0 bar Operating pressure, pneumatics: 6.0 bar Compressed air consumption, normal operation: 10 normal liters/min Compressed air consumption during drum change: 500 normal liters/min Average energy consumption per hour: 10 kWh Operating temperature of the sealant: 110°C to 130°C Ambient Conditions and Emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity: 75% Sound pressure level: less than 70 dB (A) Hedpfozdyh Hsx Akiew Requirements for the drums for the sealant Design: Material-lid container D18 according to DIN 6644 – with foot (F1) and smooth outer surface (body design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Processable glass panes Glass types Glass panes with a smooth surface (float glass) can be processed. Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastic materials based on poly-isobutylene (butyl) can be processed. The material must be flowable in the range of approximately 110°C to 130°C and have a defined viscosity curve. Only use materials that have proven themselves in practice and have been approved by the manufacturers of these materials and by Bystronic for your intended use. For detailed product descriptions and information on the handling, storage, and disposal of the material used, please refer to the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide. Dimensions of portal robot with glass conveyor Height x Width x Depth: 2800 x 1890 x 2735 mm Weight of the portal robot: 850 kg Weight of the glass conveyor: 1400 kg Dimensions of drum pumps Height x Width x Depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H at drum pump FP1: 4400 mm Height H at drum pump FP2: 4000 mm Dimensions of control cabinet Height x Width x Depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with butyl material. Condition: used From a test laboratory, in new condition, only a few operating hours for testing! Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Hodpfxszc Ilxe Akijw

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 500 kg, temperature: 250 °C, heating capacity: 105 kW (142.76 HP), air demand: 7,000 m³/h, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, Equipment: lighting, Compact powder coating system (complete system) – booth, curing oven, conveying system & Gema technology Complete system for manual powder coating of parts up to 3,000 mm in length and 500 kg payload per carrier. First-class brand-name components (Gema, Siemens, Schneider Electric, Donaldson, Riello), including installation, commissioning and operator training. Overview & Concept For sale is a brand-new, manual powder coating complete system for workpieces up to 3.0 m in length. The system combines an efficient extraction coating booth, a powerful gas curing oven, and a flexible rail conveying system including steel structure (individual design/planning of a powder coating system possible upon request!). 1. Powder coating booth (double-sided manual coating) - External dimensions (L x W x H): 3,400 x 1,100 x 2,150 [mm] - Workpiece opening dimensions: 500 x 1,600 [mm] - Extraction & filter: 2x radial fans at 4,500 m³/h (ATEX version, 3 kW each); 2 filter units with a total of 6 antistatic Teflon filters (Donaldson, 325 x 660 [mm]) - Cleaning: Automatic/manual compressed air pulse cleaning (6 valves) - Safety/equipment: ATEX-compliant internal lighting, sound insulation in the fan area, control via Siemens/Schneider wall control cabinet Electrostatic powder coating technology (Gema) (other manufacturers can also be supplied upon request) - 2x hand guns: Gema OptiSelect Pro with PowerBoost® technology, ATEX-certified - 2x control units: Gema OptiStar 4.0 CG20 with DVC and PCC precision current control, 250 memory programs, app connectivity - 2x injectors: Gema OptiFlow IG07 with quick-release & non-stick cartridge Convection curing oven (chamber oven with double door) - Internal dimensions (L x W x H): 3,500 x 2,000 x 2,300 [mm] Hodpezu Imrofx Akisw - Max. temperature / operating temperature: up to 250°C / 180 - 200°C - Heating: Indirect thermo block with Riello/Ecoflam burner (approx. 105 kW (90,000 kcal/h)) - Fuel: Natural gas or liquefied gas (LPG) (other energy supply e.g. electricity possible upon request) - Recirculation: 2 x 3,500 m³/h recirculation fans (plus automatic fan exhaust fan) - Insulation: 150mm rock wool insulation Manual conveying system including steel structure Load capacity: Max. 500 kg per carrier Equipment: 5 oven rails, 15 carriers (3m each), 3 transverse transfer trolleys Running trolleys: Equipped with high-temperature resistant bearings Scope of supply & services / Commercial points Included in the price: - Booth with extraction & filter unit - 2x Gema powder coating units - Curing oven including thermo block & burner - Conveying system including steel structure & trolleys - Installation, commissioning & operator training on site

Condition: used, Year of construction: 2025, New demonstration machine! List price available upon request! The STANDARD – a generic term and the world’s best-selling saw of its kind – has been on the market for over 40 years. Its current highlights: absolute angular accuracy thanks to the double locking of the saw beam, the integrated strip stop for repeat cuts, and the integrated TRK extraction system. Two versions of the dust extraction system allow for limit values of significantly less than 2 mg of dust per m3 of air (TRK2) or significantly less than 1 mg/m3 (TRK1). Saw frame: · Manufacturing of the machine with precision parts to 1/100 mm · Solid, self-supporting, firmly welded, torsion-resistant saw frame · TRK2 Automatically adjusting aluminum slat grid with plastic supports · TRK1 Automatically adjusting wooden support panel · 17-point roller support with 3 brake pedals (Type 6224) · 5.15 m long, split center support at an optimal working height (Type 6224), with aluminum grids · Aluminum small parts support (1 pair), individually usable Saw beam: · Stable, durable saw beam steel construction Sawing unit: · Effortless operation thanks to a fully balanced sawing unit · Robust mounting of the motor carriage ensures high cutting accuracy · Powerful, high-torque 5.5 kW motor (7.5 HP) · Carbide-tipped circular saw blade 300/30 mm · Saw blade overhang 9 mm · Integrated stop for horizontal strip cuts · SUPERSILENT sound insulation to reduce saw blade noise · Mechanical motor brake Design, ergonomics: · Typical STRIEBIG product design · Functional and user-friendly ergonomics Assembly: Wall or free-standing assembly possible Saw blade: 300 mm, scoring, 60 teeth Cutting area: L: 5300 x Hvert: 2240 / Hhor: 2100 x T: 80 mm consisting of: 1.00 Cutting interface distance vert. 1000 mm 1.00 Language documentation DE 1.00 Saw motor Y-D, 400V, 50Hz, A05 TRK 4.00 Free-standing support complete 1.00 Small parts support aluminum complete (2-part) 1.00 Operating hour counter 1.00 Paper holder Availability: on request! Location: Rieth Hjdpfxszx E Twe Akijw

Year of construction: 2017, condition: like new (used), MMM Uniclean® PL II 15 Single-chamber cleaning and disinfection unit (as new condition, year of manufacture: 2017) Product description (source: MMM) High-performance single-chamber cleaning and disinfection unit for the thorough processing of large quantities of medical devices, such as general surgical and MIS instruments, anesthesia materials, ophthalmological and dental surgical instruments, containers, receptacles, bowls, trays, surgical shoes, and other utensils. Ease of operation Loading baskets can be easily loaded from all four sides. Easy-Move rollers: Even heavy baskets can be moved easily with little effort and positioned precisely in the chamber. Glass control panel – easy to clean Rubberized CoolTouch handles allow hot baskets to be handled. Hjdpfxsimdtvs Akiew Frame and front panel made of stainless steel 1.4301 (AISI 304) Chamber and all product-contacting fixed piping in AISI 316L Glass doors with double glazing and tempered glass Glass panel with integrated 5.7" color touch screen on the loading side Large remaining cycle time display and door switch on the unloading side TECHNICAL DATA Model: Uniclean PL II 15-2 EL (= Electric, not steam-operated) Single or double door: Double door Voltage: 380 – 400 V / 50 Hz Heating: Electric Equipment Machine VE water preheating tank (Tank 1) VE water recovery tank Sound insulation of the front of the unit (Tank 2) Sound insulation of the front of the unit Sound insulation of the side wall Exhaust gas economizer Exhaust gas backdraft preventer Conductivity measurement system Monitoring of HEPA filter Potential-free contacts Recirculation system Connection to the customer’s media supply Hot water connection Dosing system 3 suction lances 3rd dosing pump incl. accessories Roller conveyor Semi-automatic transport Basic module automatic roller conveyor Automatic loading roller conveyor preparation Automatic unloading roller conveyor preparation Batch documentation and machine connection Barcode reading system UPL II (cable) Barcode scanner for tray recognition We assume no liability for the accuracy, completeness, and up-to-dateness of the information.

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-230 Serial No. 05.833/00, Year of manufacture 1969 Trough diameter 1100 mm Total trough outer height approx. 650 mm Working container / gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, infinitely variable Motor power 7.5 kW Power connection 400 volts, 50 Hz - Operating time can be set manually and via a timer - Infinitely variable motor speed via a variable gear drive - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated cover - Manual separation flap - Integrated sieve separation device after the separation flap - Liquid connection - Material outlet opening 180 x 150 mm - Control cabinet for wall mounting - Partition cover with perforated sieve Hedpfjfqpxijx Akijw Space requirement with base L x W x H 1800 x 1750 x 1700 mm Weight approx. 1800 kg Good condition Functional description: The workpieces and abrasive media are put into motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the abrasive media causes deburring and surface finishing of the workpieces.

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Hodpfxsxy Tm Io Akisw

Year of construction: 2000, condition: used, machine/vehicle number: 6197 / 6198, Used decanter / centrifuge Baker Hughes full-casing screw centrifuge Machine number: 6197 / 6198 Machine type: BSC 3044 SDCI Hsdpfoddzp Aex Akijw Year of manufacture: 2000 Overhauled: approx. 2010 Max. drum speed: 3450 rpm Max. operating speed: 3400 rpm Drum inner diameter: 448 mm Drum wall thickness: 11.0 mm Drum material: St 52 Max. filling volume: 174 dm³ Max. operating temperature: 50° C Max. operating pressure: 1 bar Total machine weight: approx. 4 t Technical machine documentation The unit is in good condition. Optionally, the sound insulation hood shown in the picture can be purchased to match the unit.

Condition: new, mileage: 400 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, loading space length: 4,250 mm, loading space width: 4,280 mm, loading space height: 800 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new MAN truck with detachable side wall body and Fassi loading crane Type: TGS 35.520 8x2H-6 BL CH MAN HydroDrive, hydrostatic axle drive Cab: the Flexible (narrow, long, normal height) Cab mounting, Comfort Tilting roof, mechanical Bumper, steel, 3-piece Front access step, integrated, with handhold Windshield, laminated safety glass (LSG), tinted Sun visor, in front of windshield Seat covers, textile, Comfort Driver's seat package Premium, air-suspended, seat heating Driver comfort seat, air-suspended, with lumbar support and shoulder adjustment Seat heating for driver's seat Multifunction steering wheel, height and inclination adjustable Instrument cluster Professional 12.3 inches 1 bunk Refrigerator MAN sound system MAN TipMatic 12.28 OD Transmission for increased driving torque Operation of MAN TipMatic, with steering column lever, manual (DNR selection, shift strategy selection) Transmission function MAN Idle Speed Driving Transmission function Rocking mode Driving program MAN TipMatic Performance and Efficiency, up to 70,000 kg Driving program MAN TipMatic Offroad, up to 70,000 kg Hodpfx Akj Afa Elsiow Driving program MAN TipMatic Manoeuvre, shunting mode Differential locks on driven rear axles Trailer coupling Air horns Rotating beacons Auxiliary and work lights Mirror package Rear view camera system Diesel tank aluminum 390 l Crane type: F805R.27 hxp-techno + JIB L436 XF-System (Extra Fast), XP-System (Extra Power) and FL-System (Full Lift) for optimized working speed and performance Danfoss D900 control unit with four control valves on the crane pillar, including emergency operation FASSI V7S radio remote control with linear levers, display of pressure values (bar and %) as well as 90% / 100% warning on the display Hydraulic outriggers, extendable hydraulically on both sides, outrigger width 8.29 m Outriggers can be operated via radio (black/white), emergency operation on the base Separate, hydraulically extendable auxiliary outrigger beam Outrigger width 6.90 m, with FSC-SL2, for mounting below the vehicle frame Winch V20 AWC, Permanent rope sheave Additional knuckle arm (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Superstructure: Crane, front mounting Bolted fifth wheel coupling, adjustable Flatbed body as a steel/welded construction, detachable design Dimensions: Length approx. 4250 mm x width 2480 mm, wheelbase 9,200 mm. Superstructure in frame Folding aluminum side walls 800 mm high, design "tipper side wall" without spring assistance Flatbed floor with diamond plate 4mm. 8x recessed lashing points per side 2500 daN, Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height 1000 mm, design steel galvanized. Inside with storage trays for the lashing rings (70x70mm) Fenders, design aluminum diamond plate Multisafe lashing eye pockets - 2 rows across the entire width of the flatbed Tool boxes, design aluminum diamond plate 2 pcs. storage trays with a lid on top (1x left and 1x right) on the auxiliary outrigger made of diamond plate Mountings (for support plates, crane plates) galvanized Mounting of an underrun protection at the rear and the auxiliary outrigger, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics Mountings (for support plates, crane plates) made of galvanized steel. Hydraulic front outrigger for 360° operating range Further information upon request.

Condition: new, Viessmann Tecto RF WMC3 1450 Refrigeration Unit The Viessmann Tecto RF WMC3 1450 (also known under the series designation TectoRefrigo) is a state-of-the-art, plug-and-play, piggyback refrigeration unit for wall mounting in cold storage rooms for standard cooling applications. Technical Data • Manufacturer: Viessmann Refrigeration Solutions • Model Designation: Tecto RF WMC3 1450 (Size 2) • Equipment Type: Plug-and-play piggyback refrigeration unit (monoblock) for wall mounting • Integrated Bluetooth connectivity (for control via app and data tracking) • Automatic leakage detection • Pre-installed connection cables: 2.5 m for door contact switch and 5 m Modbus-RTU cable (for building automation system / BMS). • Application area: Standard cooling • Housing surface: Powder-coated, similar to RAL 9003 (signal white) • Cooling capacity at L0L32 (0 °C chamber / 32 °C ambient): 1450 watts • Cooling capacity at L0L43 (0 °C chamber / 43 °C ambient): 1270 watts • Control range for cold storage room: -5 °C to +10 °C • For cold storage room volume: Up to approx. 11.1 m³ to 15 m³ (depending on the selected insulation, goods, and set temperature) • Airflow (evaporator): 1000 m³/h • Permissible ambient temperature: +5 °C to +43 °C (indoor operation only) • Refrigerant: R290 (propane) – an environmentally friendly, natural refrigerant with a very low global warming potential (GWP 3) • Refrigerant charge: < 150 g • Global Warming Potential (GWP): 3 • CO₂ equivalent: < 0.45 t • Defrosting: Automatic hot gas defrosting with demand-controlled cycle control • Condensate: Automatic, integrated condensate evaporation • Maximum permissible wall thickness: 150 mm (for the mounting cutout) • Power connection: 230 V / 50 Hz (AC via CEE plug, blue, power consumption approx. 990 W) • Power consumption (nominal current): 5.4 A • Sound pressure level: 32.8 dB • Dimensions: 828 mm x 671 mm x 976 mm (H x W x D) • Weight: 64 kg (net) Dimensions for the wall cutout • Width of the cutout: 575 mm Hsdpo Aa Rlrjfx Akiew • Height of the cutout: 395 mm Key features • Piggyback design: The monoblock unit is simply hung into the corresponding cutout in the cold storage room wall (“piggyback”). The maximum wall thickness may be 150 mm. • Hot gas defrosting: The unit has an automatic, demand-controlled hot gas defrosting system with integrated condensate evaporation, so that a separate drain is usually not necessary. • Smart electronics: Equipped with modern control, Bluetooth connectivity (for app control and data tracking), and automatic leakage detection. • Components: Thermostatic expansion valve, pressure sensors, and efficient, internally finned heat exchangers. Important application notes • Ambient temperature: The device is designed exclusively for operation in closed rooms with an ambient temperature of +5 °C to +43 °C. It does not have a winter control system and is not weatherproof (no outdoor installation). • Accessories for Viessmann cells: If the WMC3 unit is mounted on a classic Viessmann cold storage room, a special adapter cable and a converter box are usually required to connect the door contact switch and the power supply correctly. “Everything from one source: We would be happy to offer you suitable bank financing for your project.” More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2019, operating hours: 3,394 h, empty load weight: 4,000 kg, Operating hours: 3,394, First registration: 16/09/2019 Driving speed: 40 km/h - 4,000 kg gross vehicle weight Cab: Sound-insulated, low-vibration cab with entry on right or left, right-hand drive, air-suspended driver's seat, passenger seat, rotating beacon, reverse warning buzzer, engine RPM gauge, heater with 2-speed fan, heated windshield with 2-speed intermittent wiper system, radio/SD, work lights, seat belts for driver and passenger. Floor panels with metal grating, CAN View System with 7" color display showing all relevant data with integrated self-diagnosis system. Engine: VM engine D754 E6 (60D/14), 2,970 cm³, 4 cylinder, 62 kW @ 2,300 rpm, 270 Nm @ 1,350 rpm, Common Rail. Exhaust system: DPF & DOC with SCR urea system, AdBlue tank 15 l Suspension: Fully suspended with coil springs and shock absorbers front and rear. Tires: front 6.50 R10 / rear 225/75 R10 Hodpfetuzqpox Akijw Brakes: Hydraulic dual-circuit brake plus hydrostatic rear brake, hydraulically operated parking brake. Sweeper container: Container made of DIN 1.4003 stainless steel, tipping height 1.50 m, tipping angle 45°. High-performance blower with a wear-resistant, self-cleaning impeller. Discharge chute on the container 200 mm. Brush: 850 mm front brush (poly) with hydraulic drive, adjustable up to 120 rpm, 1,440 mm sweeping width per side, brush contact pressure and lateral swing angle independently adjustable via joystick, front and side collision protection. Suction duct: Continuously adjustable lifting and lowering suction duct on rigid wheels. Water tank: Fresh water tank with 152 l and water recovery tank with 250 l. Paint: Cab, side and rear covers, single-color white; chassis, fresh water tanks and container in grey. Toolkit includes grease gun, combination wrench, screwdriver set. Special equipment: - Right-hand drive (standard) - All-wheel steering - Wall-to-wall turning circle 4,600 mm - Air-conditioning with automatic climate control - Deluxe driver’s seat, heated with lumbar support - Upgraded radio with Bluetooth - Hands-free phone kit - Blind spot mirror - Heated left/right rearview mirrors - Rear-view camera system with integrated color monitor - Automatic central lubrication system (Interlube) - Folding LED rotating beacon (instead of standard) - Airport rotating beacon, strobe lights (CAA specifications CAP 168) - Optional mounting for 3rd brush available - Mounting plate & high-level work lights oriented to the right Location: 54595 Prüm

Condition: new, Year of construction: 2026, DCV4500 VIBER – Modern Industrial Dust Extraction System with Automatic Filter Cleaning The DCV4500 VIBER is a modern industrial dust extraction system designed for continuous, efficient, and quiet operation in demanding woodworking environments. The unit ensures stable extraction performance throughout the entire operating cycle, minimizing the risk of efficiency losses and production downtime. Main Advantages of the Machine VIBER system – automatic filter cleaning without interrupting operation. Full upper enclosure – significantly reduces noise and vibrations. Extraction capacity of 4500 m³/h – ensures effective dust removal even with several machines operating simultaneously. Highly sealed system design – prevents heat losses and guarantees clean air in the production hall. New safety protection system – improves operational reliability. Metal rotor – dynamically balanced for quiet and vibration-free operation. Hjdpfx Aksuc Unqoisw Design and Technology The machine is based on a reinforced, hardened steel construction. Its compact dimensions allow the extractor to be installed close to a wall or between machines without limiting the available working space. Metal waste containers equipped with viewing windows and a mobile system enable quick emptying and easy monitoring of filling levels. Service doors provide convenient maintenance access and simplify the replacement of filter bags. Precision and Work Efficiency The dust extraction fan used in the DCV4500 VIBER provides an air suction speed of 28–32 m/s. Thanks to the specially designed rotor blade geometry, maximum efficiency is achieved with minimal energy consumption. At the same time, filtration down to 5 microns effectively captures fine dust particles, improving workplace air quality and enhancing the final quality of processed materials. Applications The DCV4500 VIBER is an advanced central dust extraction system ideal for: woodworking plants, furniture manufacturers, producers of wooden components. It efficiently supports machines such as sanding machines, panel saws, edge banders, and other equipment generating large amounts of dust and chips. Its reliable operation makes it suitable for both serial production and intensive industrial use. Standard Equipment Control cabinet with ON/OFF function 18 polyester filters with filtration efficiency down to 5 microns Metal waste containers with viewing windows Full sound-insulated enclosure Technical Specifications Parameter Value Motor power (S1) 3.0 kW Power supply 400 V / 50 Hz Motor speed 3000 rpm Extraction capacity 4500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 200 mm Air velocity 28–32 m/s Filtration area 6 m² Number of filters 18 Filter material Polyester, 5 microns / filter category "G" Dimensions 752 × 1502 × 2200 mm Weight 220 kg

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Hodpfshui D Eox Akiew Volume: 100.000 Liters Diameter: ca. 2.900 mm Length: ca. 15.750 mm Weight: ca. 18.800 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: used, Year of construction: 2021, operating hours: 2,783 h, mileage: 13,117 km, overall weight: 4,800 kg, fuel type: electric, operation weight: 4,800 kg, maximum load weight: 1 kg, empty load weight: 3,100 kg, tire size: 215/75 R16, total length: 5,280 mm, tire condition: 85 %, front tire size: 215/75 R16 | 85%, rear tire size: 215/75 R16 | 85%, maximum speed: 50 km/h, Tires (front): 215/75 R16, Tires (rear): 215/75 R16, Operating hours: 2783, Battery: Li-ion 63 kWh, Width: 1300, First registration: 02.11.2021, Charger: Integrated 22 kW, self-propelled. Standard equipment of the fully electric CityCat V20e: Cab: Comfortable, sprung-suspended, sound-insulated aluminum cab. Windshield made of heat-insulating, curved, low-reflection safety glass. Two sliding windows in each door. Multi-stage heating blower, sun visors, windshield wipers with washer system. Individually adjustable, sprung driver's seat with headrest and 3-point safety belt. Angle and height-adjustable steering column. Chassis: Two-part ladder frame chassis with "C"-profile construction. Independent wheel suspension with shock absorbers and coil springs on the front axle and leaf spring suspension with shock absorbers on the rear axle. Axles and steering: Electrically driven front axle with self-locking differential (Torsen differential). Articulated steering with load-sensing steering hydraulics. Working hydraulics: Electrically driven hydraulic unit with low-noise gear pumps for steering, auxiliary functions, as well as front and side brush drives. Brakes: Hydraulic dual-circuit servo brake system with disc brakes on the front and rear axles. Parking brake (spring-loaded brake) acting on the front axle. Drive: Working speed: 0-15 km/h Driving speed: 0-50 km/h *Climbing ability up to 30% Electric drive: 88 kW Electric blower: 8.5 kW Electro-hydraulic unit: 12 kW HV battery: Battery type: Li-ion Battery capacity: 63 kWh Nominal voltage: 335 volts Hjdpfoiwwghex Akisw Operating time: up to 10 hours Charging system: Integrated charger: 22 kW Charging connector: Type 2 Charging time: 2 to 3 hours Steering: Hydrostatic articulated steering (right-hand drive), with load-sensing control. Hydraulics: Hydraulic unit with low-noise gear pumps for blower, steering, auxiliary functions, as well as front and side brush drives. On-board power supply: 12 V electrical system, battery 95 Ah. Hydraulic dual-circuit servo brake system with disc brakes on front and rear axles, spring-loaded brake (parking brake) and handbrake valve acting on the front axle. Tires: 4 tires with 215/75 R16C M+S. Dimensions: Length: 4200 mm Width: 1300 mm Height: 1999 mm Wheelbase: 1900 mm Track width: 1090 mm Sweeping width: 2100 mm Sweeping width with 3rd brush: 2700 mm Special equipment: - Lithium-ion NMC battery, 63 kWh, 335V - RAL 9016 white - Suction hose, 4m long (incl. suction pipe), diameter 120mm, with Storz couplings, with hydraulic shut-off valve - Third front disc brush - Brush diameter: 800mm, with front arm, swiveling left and right with hydraulic tilt adjustment - Hydraulic tilt adjustment, both side brushes - Side adjustment of both side brushes, stepless hydraulic adjustment of both brushes individually - Easy clean quick cleaning system for cleaning the KGB side walls, regeneration and leaf grid - Hydraulic side brush pressure regulation for both side brushes with individual side brush lifting, combined - Radio DAB+ with CD MP3, Bluetooth, microphone - Heated exterior mirrors - Brush speed

Condition: new, Year of construction: 2026, Heavy-duty, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grids Integrated small parts support made of wood Hsdpfeihahbsx Akijw Super Silent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight: approx. 910 kg Cutting depth: 60 mm Saw motor power: 3.9 kW (5.3 HP) Saw blade diameter: 250 mm Saw blade bore: 30 mm *1 Emission sound pressure level at the workstation LpA: 82 dB *2 Saw blade speed: 5250 rpm 2 extraction ports: ø 100 mm Connection value: 4.8 kW Mains connection: 3 x 400 V / 50 Hz Cutting range: L: 4600 mm; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - VSA scoring saw, stepless adjustment - Strip stop - Mechanically braked support rollers - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available - Photo shows optional digital display, which is not included in the offer.