Used Heraeus for sale (79)

Condition: ready for operation (used), LH SOGEV / LEYBOLD-HERAEUS Membranovac 1VS pressure gauge, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Ndedpfx Asi Ebykea Eef

Condition: used, Power: 1 kW (2 HP) Empty weight: 53 kg Dimensions (LxBxH): 74 x 54 x 55 cm Cargo space capacity: 54 l Volume: 54 l Manufacturer : Heraeus - Kendro Model: UT 6060 AR Type : Heat and forced air drying oven Temperature : 180°C Power : 1,64 kW Capacity : 54 L Inside dimensions : 403 x 340 x 380 mm Njdpfsx Au I Sjx Aa Esdf External dimensions : 744 x 535 x 552 mm Weight: 53kg

Year of construction: 2018, condition: excellent (used), Heraeus Kendro HeraCell 150 Co2 Incubator Technically and optically as good as new HeraCell 150 incubator HERAcell has instead of the instead of the usual water tray new type of water reservoir. This ensures high relative humidity (rH) and, above all and above all for short moisture recovery times. Compared to conventional CO2 incubators with water trough HERAcell achieves a moisture recovery time up to five times faster humidity recovery time. Consistent humidity Short humidity recovery times play an important role, especially when the the door of the incubator has to be opened frequently door must be opened frequently or volumes of media are processed. For devices with a water tray the air layer between the bottom and tray prolongs the moisture recovery time. The result is high evaporation rates in the cultures. HERAcell, on the other hand, ensures very short - up to five times times faster - thanks to superior thanks to superior technology: - Large water surface area (due to the use of the entire inner chamber floor) - Direct heat transfer from the heated floor into the humidifying water - Patented floor heating after after door opening and during O2 gassing Early water level alarm The water level is continuously monitored monitored, and an acoustic and and optical alarm signals signals in good time that water needs to be needs to be topped up. ContraCon - decontamination with moist heat at 90 °C The patented automatic decontamination system specially developed and patented for Heraeus incubators ContraCon decontamination routine Nodpfx Asiv S E Uja Ejdf has been proven in independent independent tests at 90 °C and high and high humidity to eliminate a large number of microorganisms, including mycoplasmas completely eliminated

Condition: used, This listing is for a Heraeus Biofuge Primo R Refrigerated Centrifuge. The unit is in full working condition and is ready for immediate release. The Heraeus Biofuge Primo R Refrigerated Centrifuge is an outstanding choice for small medical labs and research facilities looking for reliable and efficient sample processing. Its compact design pairs well with high-performance capabilities, making it ideal for a variety of applications. Key Features: Refrigerated Functionality: The centrifuge includes temperature control, ensuring that samples remain stable during processing, which is crucial for sensitive biological specimens. Versatile Rotor Options: Nodpfexxz Svex Aa Esdf The fixed angle rotor accommodates 6 x 50 mL tubes, but with the right rotor and adapter combinations, it can handle tube sizes ranging from 0.2 mL to 100 mL. This versatility allows for diverse applications from microcentrifugation to larger samples. User-Friendly Controls: A digital display shows all run parameters, while variable speed and RCF (Relative Centrifugal Force) controls let users set specific conditions. The QUICK RUN key is perfect for quick spins, enhancing efficiency. Safety and Reliability: Features include automatic rotor recognition, imbalance detection, and a dual lid-locking mechanism that ensures safe operation. It also has an electronic imbalance detection system to prevent accidents during runs. Applications: Cell Sedimentation: Ideal for isolating algae, yeast, bacteria, and cell organelles. Sample Preparation: Great for preparing DNA and protein precipitates, which are essential in molecular biology labs. Clinical Analysis: Suitable for blood and urine analyses, making it a valuable tool in medical diagnostics. Centrifugation of Microliter Tubes: Capable of processing standard test series in microliter tubes, ensuring versatility in routine analyses. Specifications: Maximum Speed: 15,000 rpm Maximum RCF: 21,890 x g Control Speed: Adjustable from 300 to 15,000 rpm (±10 rpm) Noise Level:

Condition: excellent (used), Heraeus Type: HA 2472 BS Nodpfx Aasvyd Ado Eodf Cleanroom workbench for installation and operation in laboratories Interior dimensions: 1,800 mm x 580 mm x 830 mm (length x depth x height) Lighting, gas connection Condition: used Scope of delivery. (See pictures) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, This listing is for a Sorvall Heraeus 75002000 Centrifuge Rotor with Buckets. The unit is in full working condition and is ready for immediate release. Supplied with x4- 75002002 Round Buckets Enhance your laboratory's centrifugation capabilities with the Sorvall Heraeus 75002000 rotor, crafted for efficient performance in various applications. Njdpfxjxxy Ucj Aa Ejdf Key Features: Manufacturer: Sorvall Heraeus, known for reliability in laboratory centrifugation. Part Number: 75002000, ensuring you have the correct rotor for your specific needs. Maximum Speed: Capable of reaching up to 4,700 RPM, providing effective and rapid sample separation. Rotor Type: Swing Bucket Rotor design allows for smooth operation and optimal pelleting of samples as buckets swing out during centrifugation. Capacity: Accommodates 4 x 400 mL sample tubes, making it suitable for moderate volume applications. Maximum Load: Designed to support a max load of 540 g, ensuring stability even with heavier samples. Maximum RCF: Achieves a maximum relative centrifugal force (RCF) of 4618 x g, which is effective for a wide range of laboratory separation tasks. Compatible Centrifuges: Sorvall Legend Mach 1.6 Heraeus Multifuge 1S

Condition: excellent (used), Heraeus / Thermo Type: WU 6100 Heat-drying oven with recirculating air 500°C Description Heat and drying oven Heraeus WU 6100 up to 500°C Recirculating air oven for thermal testing of high-quality materials. For precise heat treatment processes up to 500°C Offers precise and even temperature distribution as well as exact maintenance of the selected temperature. Technical data: Internal volume: 52 L Temperature range up to 500°C External dimensions (W x H x D): 744 x 552 x 535 mm Ndedpewq Rl Eefx Aa Eef Internal dimensions (W x H x D): 403 x 380 x 370/339 mm Weight: 53 kg 400 V 50/60 Hz 11.4 A 5.4 kW Equipment: Temperature controller with digital display Over and under temperature protection Throttle for stepless fresh air and exhaust air regulation Timer Speed control for the recirculating fan Stainless steel inserts Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, specifications reserved!) If you have further questions, we are happy to answer them by phone.

Condition: used, This listing is for a Heraeus Instruments 7570 E Centrifuge Buckets. The unit is in full working condition and is ready for immediate release. The Heraeus 7570 E Rotor Buckets are designed to be used with compatible centrifuge rotors, providing flexibility and efficiency for various laboratory applications. Here’s a quick overview based on your mention of the 4 x Heraeus #7570 E Rotor Buckets: Heraeus #7570 E Rotor Buckets Key Features: Max Capacity: Njdpexxy H Eefx Aa Eedf Each bucket has a maximum capacity of 600g, allowing for the centrifugation of a variety of sample types, including biological and chemical solutions. Compatibility: These buckets are specifically designed for use with Heraeus swinging bucket rotors, enhancing their versatility in centrifuge applications. Efficient Sample Processing: The design of the buckets facilitates even weight distribution and efficient separation, contributing to improved outcomes in sample processing. Material: Constructed from durable materials to withstand the rigors of repeated centrifugation cycles, ensuring reliability over time. Applications: Ideal for preparing biological samples, including cell cultures, blood products, and other laboratory specimens that require high-speed centrifugation. Benefits: Scalability: Having 4 buckets allows for simultaneous processing of multiple samples, increasing throughput in laboratory settings. Versatility: Supports various sample sizes and types, making it a valuable addition to any lab utilizing Heraeus centrifuges.

Condition: excellent (used), Type: HT 7010 Heraeus Vötsch temperature test cabinet, water-cooled Temperature deviation in time ± 1 K Temperature deviation in space ± 2 K Housing dimensions: Width 820 mm Depth 840 mm Height 1670 mm Interior: Width 550 mm Depth 350 mm Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range -70°C to + 180°C 2 x side feedthrough 9cm Weight approx. 260 kg Refrigerant: R404A and R23 For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Njdshhyz Sepfx Aa Esdf Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Vötsch climatic test chamber Here we offer Heraeus Vötsch climatic test chamber. Designation VC³ 0100 Test chamber dimensions: H x W x D, approx. 950 x 1100 x 950 mm TEMPERATURE TESTS: Minimum temperature -0°C Maximum temperature +90°C Temperature change rate cooling 0.2 K/min Temperature change rate heating 0.5 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Heat compensation at +20 °C 350W CLIMATIC TESTS: Minimum temperature +10°C Maximum temperature +90°C Dew point temperature range +4°C to +89.5°C Nsdjn Ard Sspfx Aa Eedf Humidity range 10 to 98% r. h. Humidity deviation over time ± 1 to ± 3% r. h. Temperature deviation temporal ± 0.1 to ± 0.3K Temperature homogeneity in space ± 0.5 to ± 1.0K Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 2.6 kW Nominal current: 12 A Refrigerant: R 404A Weight approx. 1400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Type: VC³ 0100 / year of construction 2013 Condition: second-hand / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Ndjdsrkm U Uopfx Aa Eof Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Vötsch temperature test chamber Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VTS 7033 water cooled Temperature range: -70°C to +180°C Temperature deviation temporal ± 0,5 K Temperature deviation temporal ± 1,5 K Heating speed: 7,5 K/min Cooling rate: 6.5 K/min Test chamber dimensions: Width 825 mm x depth 800 mm x height 870 mm housing dimensions: 1080 mm x 1710 mm x 1950 mm Ndedpfx Aolt U Avoa Eef lateral passage 12cm and 13cm voltage: 400V+6/-10%,3/N, 50Hz nominal power 9,5 kW nominal current 22 A refrigerant R404A / R23 approx. 570 liters weight: 580 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored by calibrated equipment. Type: VTS 7033 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus shock test chamber Here we offer a shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: The temperature range of the warm chamber is from +50°C to +220°C. Temperature deviation temporally in useful chamber center ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -65°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Rated power 10 kW Rated current 25 A Ndedoikvlxspfx Aa Eef Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: HT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus heating and drying oven Here we offer a Heraeus heating and drying oven. Heraeus heating and drying oven up to 250°C Manufacturer / Type: Heraeus UT 6060 Features: Temperature range: 250°C Net volume: 52 liters Weight (empty): 53kg Inner dimensions: depth 403 mm width 340 mm height 380 mm External dimensions: depth 744 mm width 535 mm height 552 mm Rated voltage 230V 50/60Hz Rated current 6,8 A Rated power 1,50 kW Type: UT 66060 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Nodpsn Arqlofx Aa Eedf Further questions we can answer on the phone for you.

Condition: good (used), machine/vehicle number: HE-14804, Here we offer an incubator. Volume 409 liters Manufacturer: Heraeus Size: 74.5 x 79 x 181 cm WxDxH Nsdpjc N N Rcefx Aa Eedf Internal dimensions: 55 x 55 x 136 cm WxDxH Nominal temperature: 70°C Connection: 230V 50 Hz 3.7 A Weight: approx. 157 kg Type: B 6420 Condition: second-hand / used Scope of delivery: (see pictures) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Incubator Incubator Here we offer an incubator. Volume 30 litres Manufacturer: Heraeus Outer dimensions: height 552 mm x width mm 552 x depth 610 mm Ndedpfxjg Aiq Nj Aa Esf Interior dimensions: height 231 mm x width mm 352 x depth 370 mm Nominal temperature: 50 °C Connection: 220V 50/60 Hz 1,00 A 0,22 kW Weight: approx. 41 kg Type: B 6030 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Heraeus / Thermo Type: UT 6200 Heraeus / Thermo heating and drying oven Process control up to 300°C External housing: Depth 715 mm, Width 895 mm, Height 816 mm Internal dimensions: Depth 503 mm, Width 554 mm, Height 644 mm External diameter: Inlet/outlet connection 40 D Internal volume: 180 liters Steam chamber: 240 liters 1/PE AC, 230 Volt, 50 Hz, 12.0 A, 2.65 kW Weight: 100 kg Type: UT 6200 Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data!) If you have further questions, we are happy to answer them by phone. Ndedew Euwzspfx Aa Ejf

Condition: excellent (used), Heraeus drying cabinet hot air sterilizer Here we offer a Heraeus drying cabinet hot air sterilizer. Manufacturer / Type: Heraeus SUT 6060 Features: Temperature range: 250 °C Net volume: 52 litres Weight (empty): 53 kg Internal dimensions: depth 339 mm, width 403 mm, height 380 mm Ndsdpfx Aeg Airfoa Eof External dimensions: Depth 535 mm, width 744 mm, height 552 mm Rated voltage 230V, rated frequency 50/60Hz, rated current 7.1 A, rated power 1.64 kW Type: SUT 6060 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a weathering test instrument. Heraeus Atlas Xenotest BETA a universal weathering instrument for testing the light fastness and weathering resistance of materials under normal, high temperature and high performance conditions. XENOSENSIV Gear Regulation of the lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature controlled up to 80°C degree Measuring sensors at sample level XENOSENSIV E(300-400 nm) Humidification / Sprinkling Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V± 10 % 50-60 Hz Mains connection: 32A Power consumption: approx. 12kVA Nsdpfjg Dglysx Aa Ejdf Rated power of xenon lamp 2200VA Power of Xenon lamp 2800VA Rated current 16A Lamp current max. 20A Dimensions: Width 900mm x Depth 1200mm x Height 1800mm. sample area max. 4000cm² Weight: approx. 400kg Type: Heraeus Atlas Xenotest BETA LM Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved). Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber water cooled Temperature range -70°C to + 180°C Temperature deviation temporal ±0,1 to ±0,5 K Temperature deviation in time ±0.5 to ±2.0 K Temperature change rate cooling 7.5 K/min Temperature change rate heating 7.5 K/min Nedpjhh H Hisfx Aa Ejdf Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 450 mm Height 750 mm Outer dimensions: Width 870 mm Depth 1280 mm Height 1575 mm Observation window: Width 300 mm x height 540 mm Test chamber volume 190 litres Rated voltage: 3/N/PE AC, 400 V ±10 %, 50Hz Rated power: 10.5 kW Rated current: 22 A Fuse, on-site: 32 A slow-blow Sound level at 1m distance (free field measurement) < 69dB (A) lateral feed-through 50 cm / 125 cm Cabinet is water cooled Refrigerant: R 404A and R 23 Weight approx. 460 kg Type: VTS 7018-5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Heraeus heat and circulating air drying oven Here we offer a Heraeus heating and circulating air drying oven. Heraeus heating and circulating air drying oven up to 300°C Manufacturer / Type: Heraeus UT 6060 Features: Temperature range: 300°C Ndjdoh Nunqepfx Aa Esf Net volume: 52 liters Weight (empty): 53kg Inner dimensions: depth 403 mm width 340 mm height 380 mm External dimensions: depth 744 mm width 535 mm height 552 mm Rated voltage 230V, rated frequency 50/60Hz, rated current 6,8A, rated power 1,50kW Including 2 inserts Type: UT 66060 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Heraeus heat and air circulation drying oven. Heraeus heating and air circulation drying oven up to 300 ° C Manufacturer / type: Heraeus UT 6060 Properties: Temperature: 300 ° C Net volume: 52 litres Weight (empty): 53 kg Internal dimensions: Depth 403 mm, width 340 mm, height 380 mm External dimensions: Depth 744 mm, width 535 mm, height 552 mm Nominal voltage 230 v, rated frequency 50/60 Hz, rated current 6,8A, output 1, 50kW Including 2 deposits Type: UT 66060 Condition: pre-owned / used Scope of delivery: (See image) Njdpfxsd Hpv As Aa Ejdf (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: excellent (used), Here we offer shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: Temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation temporally in useful chamber center ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -65°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min Nodpfx Aaei Az Ege Eodf cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Operating hours: 27.903 hrs. Weight: 1000 kg For you as a buyer, the following information for your safety! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: HT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Ndodporm Rihsfx Aa Eef Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VTL 60/60 Nsdpfx Aaewgcxce Eodf The Vötsch VTL 60/60 is an industrial heating and drying cabinet, specifically designed for the safe drying of coated materials, such as paints and resins. It meets the safety requirements of EN 1539 and is therefore suitable for processes where flammable solvents may be released. Technical specifications: Usable volume: 0.216 m³ (600 × 600 × 600 mm) Nominal temperature: 250 °C Maximum heating surface temperature: over 750 °C Nominal power: 7.2 kW Connected load: 8 kW Minimum exhaust air flow rate: 102 m³/h External dimensions (L × W × H): 1150 × 1000 × 1700 mm Weight: approx. 250 kg Safety features: The VTL 60/60 is equipped with a powerful recirculation fan, which ensures even temperature distribution and effective dilution of solvent vapors. This prevents the formation of explosive atmospheres and ensures safe operation. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.