Used material testing for sale (480)

Condition: good (used), TIRA Type: Walk-in climate simulation cell TCZ 4020 S-2k Technical data: Temperature range -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range 10...approx. 95 % r.h. Humidity tolerance +/- 5.0 % r.h. Dimensions: Test chamber volume: 19m³ External dimensions (WxDxH) approx. 2660mm X 4960mm X 3300mm Test chamber (WxDxH) approx. 2270mm Χ 3190mm Χ 2756mm Door opening (WxH) approx. 2270mm X 2756mm Iodpfx Ajuviumjg Ueal Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: C-40/350 Ex/l Climate Test Chamber, Water-Cooled ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% r.h. over time The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Cooling unit: water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Rack: Stainless steel, support surface 620 x 600 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg Control system: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numeric input of setpoints Plain text fault messages RS 232 interface Ethernet interface Free switching channels for user-side test item control Iodpfxowvr H Us Ag Uoal Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Nominal current: 14.3 A Protection class: IP 54 Sound pressure level

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Isdpsw I Rxrjfx Ag Ujal Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Vötsch climatic test chamber Here we offer a Vötsch climatic test chamber. Designation VC³ 4100 Air-cooled With temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Unit dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Feed-through: Ø 125 mm Ø 50 mm Data for temperature tests: Temperature range -42°C to +180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Temperature change rate: Heating 4.0 K/min Cooling 3.0 K/min Max. heat compensation at +20°C 4500 watts Data for climate tests Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r. h. Temperature deviation temporal ± 0.1 to ± 0.3 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation temporal ± 1 to ± 3% r. h. Heat compensation max. 500 W Iodsqmn A Nepfx Ag Ueal Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404 A Weight approx. 840 kg Type: VC³ 4100 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Vötsch climatic test chamber. Designation VC³ 4100 Air-cooled With temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Unit dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Feed-through: Ø 125 mm Ø 50 mm Data for temperature tests: Temperature range -42°C to +180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Temperature change rate: Heating 4.0 K/min Cooling 3.0 K/min Max. heat compensation at +20°C 4500 watts Data for climate tests Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r. h. Temperature deviation temporal ± 0.1 to ± 0.3 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Iajdpfx Asqwim Eog Usl Humidity deviation temporal ± 1 to ± 3% r. h. Heat compensation max. 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404 A Weight approx. 840 kg Type: VC³ 4100 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), IVA Engineering Type: M5386 Environment and stability chamber Dry Hot Air Test Chamber Dry hot air test chamber Rated voltage: 415V AC/20A Dimensions: 90.55x78.74x90.55 in - 2204.60 lb 2300x2000x2300 MM - 1000 KGS Interior Dimensions: (height x width x depth): approx. 1950 x approx. 1230 x 1510 mm Scope of delivery: (see picture) Iajdpfed Nfrlex Ag Ujl (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VTS³ 7018-5 Water-cooled Test chamber dimensions: Width 580 mm x depth 450 mm x height 750 mm Housing dimensions: Width 900 mm x depth 1550 mm x height 1850 mm Temperature test: Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min Temperature change rate: cooling 7.5 K/min Test chamber volume: 190 liters Nominal voltage: 400V Rated current: 20 A Rated power: 9 kW Ijdon E Sk Espfx Ag Usal Weight: approx. 540 kg Refrigerant: R404A and R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Type: EGN28-6CWL Espec temperature water cooled Temperature test chamber N series Power supply: AC 400 V 3-phase 50/60Hz 38A Temperature range -70 to +180°C Temperature change rate Heating 10 °K/min Cooling 5.5 °K/min Internal dimensions W x H x D in mm 1000 x 1000 x 800 Iodpfx Aeuzva Uog Uoal External dimensions W x H x D in mm 1205 x 1920 x 2159 Useful volume 800 liters Refrigerant R-404A Refrigerant R- 508A Weight: approx. 695 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss climate chamber water-cooled (test room explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST ROOM Technical data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Test room capacity: approx. 600 liters Cold / heat operation -70 to 180°C Climate operation 10 – 95°C Humidity 10...98% r. H. Temperature change per time Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A On-site fuse: 32 A slow-blow Permissible test item weight Total load of the grate supports 80 kg Test room floor 80 kg, grate insert 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (The air conditioning system's evaporator has been replaced) For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate Ijdpfx Ajv Ewy Hog Ueal 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Climate test chamber C-55/1000 Li water-cooled Temperature range: -50°C to +100°C Humidity range: 5 to 95% RH Dew point range: 5°C to +78°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 Iasdpfx Agova Hi Hj Uol The type designation of the CTS cabinet series is composed as follows: z. e.g. type C -55/1000/Li 1) C means: climate 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C Climate tests: Temperature range +5 °C to +95 °C Humidity range 5% to 95% rel. humidity Dew point range +5°C to 78°C Temperature deviation ≤ ±1.0 K in time Humidity deviation ≤ ±3.0% relative humidity over time The technical data refers to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may influence the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Iasdpfx Asw S E N Tjg Uel Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Condition: used, Type: CS-70/900 CTS Climate Test Chamber with Humidity, water-cooled (converted to R-452a refrigerant) Temperature range: -70°C to +180°C Humidity range: 10–98% RH Iaedoxb Dm Ispfx Ag Uol Test chamber internal dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet dimensions: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerant: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Chamber weight: 900 kg Control cabinet weight: 150 kg Important safety information for buyers: The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) For any further questions, please contact us by phone.

Condition: used, PANalytical PANalytical X’Pert PRO MPD X-ray Diffractometer (XRD) Excerpt from the service report: Device: PANalytical X’Pert PRO MPD Report date: 07.07.2021 Work performed: - Reinstallation and commissioning of the system - Connection of external supply lines - Warm-up phase - Complete alignment of goniometer and additional components - Maintenance carried out, including replacement of defective parts Spare parts used: L 3.6V NC/U3 R15.0X52.0 BATTERY. NI-CD FAN FOR X-CELERATOR UNIT FILTER, WATER Motor PW3050 ("Device was not tested in-house") The X’Pert PRO MPD is a highly versatile and powerful X-ray diffractometer (XRD) designed for structural characterization of crystalline materials. It is ideal for pure research as well as routine applications in industry and academia. Thanks to its modular design, fast detection, and control of temperature and atmosphere, it is excellently suited for both routine analyses and complex in-situ experiments. Key features: - Multiple measurement geometries possible: - Reflection measurements in Bragg-Brentano (θ–2θ) mode Iaodpfxswycats Ag Uol - Transmission geometry for powders in capillaries - Optional SAXS (Small-Angle X-ray Scattering) for nanostructure analysis - Radiation source and detectors: - Typically copper anode (Cu-Kα, λ ≈ 1.54 Å) - X’Celerator detector (1D, ultra-fast) for parallel data acquisition - Modular system with PreFIX technology: - Rapid change of optics and sample stages without recalibration - In-situ measurements at high temperatures: - Measurements up to approx. 1200°C possible - Controlled atmosphere: air, nitrogen, oxygen (limited for reducing atmospheres) Typical applications: - Phase analysis and quantitative Rietveld refinement - Determination of crystallite size, microstrain, residual stress - In-situ investigation of phase transitions, oxidation, crystallization, etc. - SAXS measurements for analysis of nanoparticles and pore structures - Broad range of sample types: powders, thin films, ceramics, pharmaceuticals, catalysts, and more Technical data (typical) Property & Specification Angle range (2θ): approx. 0.5° to 150° Step size: up to 0.002° or finer Goniometer: vertical, 0–0, radius approx. 240 mm Temperature range: room temperature up to approx. 1200°C Atmosphere: air, N₂, O₂ (limited for reducing atmospheres) Detectors: X’Celerator (1D), proportional counter Distribution & application areas: The X’Pert PRO MPD is in use worldwide at, for example: - Universities (ETH Zurich, TU Dresden, University of Vienna) - Research institutes (e.g., Max Planck Institutes, ICN2, IS2M) - Industry (e.g., materials development, pharmaceuticals, chemistry) Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) Iajdjxugq Ajpfx Ag Usl 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS test cabinet climatic chamber Here we offer a CTS climatic chamber. Air cooled Test chamber volume: 200 liters Test chamber dimensions: Height 750, width 650, depth 400 mm External dimensions: Height 1800, width 920, depth 1345 mm Temperature working range temperature range: -40°C / +180°C cooling speed: 4 K / min heating speed: 4 K / min Max. heat radiation at +20°C: 3500 W Temperature constancy, temporal: ≤± 0.3 K. Climate working range Temperature range: +10°C to +95°C. Humidity range: +10%to +98% r.H. Isdpfxjhwhzws Ag Uoal Connection: 400 V +6% -10%, 3/N, 50 Hz Rated current 9.4 A Rated power 4,8 kw Weight: approx. 450 kg Refrigerant R404A Type: CTS C-40/200 The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), RS Simulators Here we offer a climatic test chamber. Water cooled 300 liters Temperature range from -75 °C to +180 °C Time deviation +- 0.2 K to +- 0.8 K Average heating rate: approx. 2.1 K/min Average cooling rate: approx. 1.2 K/min Humidity range from 10 % to 98 % rel. humidity Working climate range Temperature: 10 °C to 95 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 1000 mm 1800 Height mm 1400 Depth mm Voltage: 3x400V/N/PE Current: 40A Refrigerant: R404a / R23 Type: KS 300 / 75 Weight: 630 kg For you as a buyer for safety the following information! Iedpfx Ajiivgveg Ueal The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Weiss temperature cabinet. Weiss temperature cabinet With S!MCON / 32 control Air-cooled (refrigerant converted to R-452A) Test chamber capacity: approx. 335 liters Test chamber dimensions: Height 750 mm, width 580 mm, depth 765 mm External dimensions: Height 1775 mm, width 870 mm, depth 1600 mm Data for operation: Test room lighting Halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 12.5 A Rated power 4.1 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 58 dB(A) Data for temperature tests: Temperature range: -72 to +180 °C Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-452A / R-23 Weight: 585 kg Type: WT3-340/70 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Iasdpfxeq U Sdns Ag Ujl We will be happy to answer any further questions you may have on the phone.

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS enclosure series is made up as follows: z. e.g. type TSR -30/1000 1) T means: Temperature 2) S means: stress screening 3) R means: external conditioning 4) -30 means: lower temperature -30 °C 5) 1000 means: 1000 liter test chamber volume Technical performance data: A) TSR-30/1000 basic device without hose connections, i.e. when used as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Air volume flow approx.2000m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external test room provided by the customer Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K in time Average rate of temperature change, measured with short-circuited circuit Heating 4.0 K/min Cooling 4.0 K/min in the range from +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment, measured with short-circuited circuit Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated, any feed-throughs must be optimally sealed on site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, fully hermetic Infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, door hinge on the left, one-handed operation, lockable. Iedpfx Ajrivfcog Ujal Shelf: Stainless steel, support surface 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf load 100 kg Test area lighting: Halogen lamp 20 W, 12 V Control: - 32 bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), White Type: WK1-1000/70 Weiss climatic test chamber water-cooled (refrigerant converted to R-452A) Touch panel" control unit Iasdpfx Asrvx Ezog Usl All control and operating commands can be triggered by simply touching the function icons on the all control and operating commands by simply touching the function icons. Feedthroughs The test chamber is equipped with feed-throughs on the right and left side. Measurement cables and test equipment can be routed into the test chamber through these. Feed-throughs: 1 feed-through ∅ 125 mm installed on the right 1 feed-through ∅ 50 mm installed on the left Volume 990 liters Test chamber dimensions: Test chamber: width 1100 mm, depth 950 mm, height 950 mm Housing: width 1385 mm, depth 1850 mm, 1980 mm Data for temperature tests: Minimum temperature -70 °C Maximum temperature +180 °C Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 2 K Temperature change rate, heating 4 K/min Temperature change rate, cooling 2.5 K/min Max. heat compensation 2750 W Data for climate tests: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Temperature deviation, temporal ± 0.1 to ± 0.3 K Temperature homogeneity, spatial ± 0.5 to ± 1 K Humidity deviation, temporal ± 1 to ± 3% r.h. Data for operation: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 29A Nominal power 19.8 kW Refrigerant: R-452A/ R23 Weight approx. 910kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Binder Type: Binder CB 210 CO² / 9140-0013 Technical data Temperature range 7 °C above room temperature to 60 °C MB1 controller for temperature and CO2 concentration Interior volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Iaedpsrp Enbofx Ag Uol Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Iaedpfx Aovba Rasg Usl Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a temperature test cabinet. Water cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x height 2100 mm x depth 2250 mm Test chamber dimensions: Width 840 mm x height 840 mm x depth 840 mm Unit part : width 2300 mm x height 2000 mm x depth 1300 mm Iasdpfxjmn Rcis Ag Ujl Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm Iaodpoun Rv Nofx Ag Ujl External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Vötsch Type: VTS 7011-5 Heraeus Vötsch temperature chamber, water-cooled Test chamber volume 110 liters Test chamber dimensions: Width 560 mm Depth 350 mm Height 630 mm External dimensions: Width 850 mm Depth 1030 mm Height 1640 mm Temperature range - 70°C to +180°C Temperature deviation in time ± 0.3 to 1 K Spatial temperature deviation ± 0.5 to ± 2 K Temperature change rate cooling 6 K/min Temperature change rate heating 10 K/min Refrigerant: R-404 A / R 23 Voltage 3/N/PE AC 400V±10% 50Hz Rated power 7.5 kW Isdpsum Uzmofx Ag Ujal Rated current 13 A Weight: 360 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Zwick / Roell Zwick Indentec hardness tester Type: 4150DLC-A Technical data: Available test forces 60, 100 and 150 kgf Power supply 115 / 230 V (50 - 60 Hz) 2/1A 1L/N/Pe + EO-4010C camera and ueye software Condition: used Weight approx. 60kg Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone. Iaedpevxrxdjfx Ag Ujl