Used material testing for sale (470)

Condition: excellent (used), RS Simulators Here we offer a test cabinet. Water cooled Temperature range: -40°C to +180°C Test chamber dimensions: 850mm x 850mm x 800mm (WxHxD) Outer dimensions: 1100mm x 1850mm x 1500mm (WxHxD) current consumption: 13,5 A Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 750kg Type: TS 600/45 Explosion proof operation not tested but Max 160°C in this Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Todjg Urq Iopfx Ahuef Further questions we can answer gladly on the phone for you.

Condition: good (used), White Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber capacity 450 liters Max. load 100 kg Brine storage tank 180 liters External dimensions: Height 920 mm Width 1930 mm Depth 800 mm Test compartment dimensions: Height 740 mm Width 850 mm Depth 570 mm Areas of application: Corrosion tests: Salt spray test: room temp. up to + 50°C Condensation water test: Room temp. up to + 45°C Humidifier +75°C Temperature constancy The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW Rated current 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Todpfoudvg Rsx Ahujf Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: second-hand / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), White temperature shock test chamber Here we offer a temperature shock test chamber. Weiss temperature shock test chamber air cooled ( Compressor was renewed ! ) Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot-/cold chamber 10 s Temperature constancy ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width ( without and with swivel arm ) without....ca. 1820 mm with....ca. 1915 mm Depth ( without and with test chamber door ) without....approx. 900 mm with....approx. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Tedpfx Aek E Htyehuof Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus Vötsch climatic test chamber Todpfx Ahsn Ard Souef Here we offer Heraeus Vötsch climatic test chamber. Designation VC³ 0100 Test chamber dimensions: H x W x D, approx. 950 x 1100 x 950 mm TEMPERATURE TESTS: Minimum temperature -0°C Maximum temperature +90°C Temperature change rate cooling 0.2 K/min Temperature change rate heating 0.5 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Heat compensation at +20 °C 350W CLIMATIC TESTS: Minimum temperature +10°C Maximum temperature +90°C Dew point temperature range +4°C to +89.5°C Humidity range 10 to 98% r. h. Humidity deviation over time ± 1 to ± 3% r. h. Temperature deviation temporal ± 0.1 to ± 0.3K Temperature homogeneity in space ± 0.5 to ± 1.0K Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 2.6 kW Nominal current: 12 A Refrigerant: R 404A Weight approx. 1400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Type: VC³ 0100 / year of construction 2013 Condition: second-hand / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Here we offer an Espec (ThermoTec) stress test chamber. Outer dimensions: W x H x D: 860 x 1795 x 1000 mm Tsdpfopdm Uyox Ahujf Test chamber dimensions W x H x D: 355 x 355 x 426 mm 2 x 46 l Voltage 230 V 1/N 50 Hz Rated current 37A Fuses 250 V , 2 x 3 A Type: EHS-221MD Temperature range: + 105°C to + 142.9°C Humidity range 75 to 100 % r.H. Temperature constancy: -+ 0.5 °C Pressure range: 0 to 2.0 kg/cm² Heat-up or pressure build-up time: from 0 to 2.0 kg/cm² in about 60 minutes 390 kg Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a temperature test cabinet. Water cooled Technical performance data: Temperature working range Temperature range in °C -70 / +180°C Rate of change according to DIN 50 011, part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions height, approx. 750 mm, width, approx. 650 mm, depth, approx. 720 mm External dimensions height, approx. 1800 mm, width, approx. 850 mm, depth, approx. 1640 mm Operating data: Electrical connection 400 V, 3/N, 50 Hz. nominal power 13,3 kW Tedpfxsn Sl T Ss Ahujf Refrigerant: R404A / R23 Weight: approx. 650 Kg Type: TS-70/350 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: like new (used), HALT/ HASS Espec Here we offer you a temperature chamber. Temperature -100 to + 200°C Table in lower position (WxDxH) 889 x 889 x 889 mm Table in upper position (WxDxH) 889 x 889 x 635 mm Overall dimensions (WxDxH) 1425 x 1748 x 2134 mm Tsdpoqwybgofx Ahujf Work table 762 x 762 mm Max load 145 kg Acceleration 5 to 75 gRMS Voltage 480 or 440 V / 60 A / 3F 400 or 380 V / 80 A / 3F Type: Qualmark T2.5 + compressor 99480630 Condition: used Only 147 hours Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) More We will be happy to answer any questions you may have over the phone.

Condition: excellent (used), Here we offer you a walk-in climate chamber. Manufacturer: RS Simulators, water-cooled The chamber can be dismantled into 3 parts for transport (bolted) Temperature range: -30°C to +100°C Refrigerant: 20kg R-404A + 20kg R-452A External dimensions: approx. width 3920 mm, depth 7350 mm, height 2600 mm Test room dimensions: approx. width 3500 mm, depth 5400 mm, height 2110 mm Electrical data: 68kW nominal power Voltage: 3x400V/PE; Current: 135A Type: KKM 40 / 45 S Further technical data will follow! For your security as a buyer, the following information! Todpfoqw U Aaox Ahuef The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and information are reserved!) We are happy to answer further questions by phone for you.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Todpfx Ahjrkm U Uouef Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer you a vibration test system.Test Manager SWR 900Control cabinet SWS 200-10Vibration exciter SW 1508/1Hydraulic supply SWT 1110/11Power amplifier TGA sound insulation housing SWG 211/1Fan SWG 103Operating hours: approx. 1,300 hoursCondition: used / usedScope of delivery: Vibration test system as shown(Changes and errors in the technical data, specifications reserved!)We are happy to answer further questions for you on the phone. Tsdpfxed Tp Auo Ahujf

Condition: excellent (used), Here we offer a bird heat cabinet with nitrogen supply. Vötsch heat cabinet with nitrogen supply Tedpfod Ngg Tsx Ahuef Nominal temperature: 250°C Name stream: 10 A Connection value: 6.3 KVA Nominal voltage: 400V3coma N)PE AC 50/60hz Nominal power: 6 KW Type: TU 60/60 G-ISO Condition: used/used Delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We can answer more questions on the phone for you.

Condition: excellent (used), Here we offer you Thermotron temperature chamber. Water cooled Tedpfeixtitjx Ahuof Thermotron temperature chamber SE-1000-6-6 Inner dimensions: WxDxH 1000 x 1000 x 980 mm Working volume: approx. 980 liters Temperature range: -70ºC to 180ºC Heating up total : ca 4,1 K Cooling down total : ca 1,2 K Heating power in ºC/minute -65º to 71ºC: 6.8ºC Heating power in ºC/minute -65º to 180ºC: 5.6ºC Heating capacity in ºC/minute -40º to 85ºC: 6.5ºC Cooling capacity in ºC/minute 85º to -40ºC: 4.7ºC Cooling capacity in ºC/minute 71º to -65ºC: 3.7ºC Cooling capacity in ºC/minute 180º to -65ºC: 4.3ºC External dimensions - WxDxH: 1250 x 1900 x 2200 mm Electrical requirements 400V/5P/N/PE 35 A Refrigerants: R508B and R404 A Approx. weight: 900 kg Type: Thermotron SE- 1000-6-6 For you as a buyer, the following information for your safety! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Tjdpfouudx Dex Ahusf Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Type: VC³ 7034 Heraeus Vötsch Climate Test Chamber with Humidity Control (Air-Cooled) Tjdpfx Ajxfh Spjhuef Test Chamber Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External Dimensions: Width 780 mm x Depth 1,758 mm x Height 1,800 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal deviation: ± 0.1 to ± 0.5 K Spatial deviation: ± 0.5 to ± 1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 3.0 K/min Cooling: 3.0 K/min Specifications for Climate Testing: Temperature range: -70°C to +180°C Temperature deviation in steady-state condition, according to IEC 60068-3-5 (depending on chamber temperature) Temporal deviation: ± 0.1 to ± 0.3 K Spatial deviation: ± 0.5 to ± 1 K Humidity range: 10% to 98% RH Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW Rated current: 16 A Protection: 16 A slow-blow fuse, provided by customer Refrigerant: R-404A/R23 Test chamber volume: approx. 335 liters Net weight: approx. 515 kg For your safety as a buyer, please note the following information: The following actions are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, chambers undergo a documented test run. Condition: Used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further inquiries, please feel free to contact us by phone.

Condition: excellent (used), Type: VCS 7034-5 Climate Test Chamber Water-Cooled Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3,000 W / at -20°C: 3,000 W Temperature calibration points: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Humidity deviation over time: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climatic calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width: 580 mm, Depth: 765 mm, Height: 750 mm External dimensions: Width: 870 mm, Depth: 1595 mm, Height: 1775 mm Feedthroughs: 1 x approx. 50 mm Ø, left side 2 x approx. 125 mm Ø, left side 1 x approx. 125 mm Ø, right side Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Todpjxufypjfx Ahusf Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your security as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), RS Simulators RS Simulators ST2K 320/70D Water-cooled Shock Test System For sale is a high-performance thermal shock test system, model ST2K 320/70D. This unit is ideally suited for standardized thermal shock testing according to DIN EN 60068‑2‑14, including optional humidity testing in the upper test chamber. With its two temperature chambers (–70 °C to +240 °C) and automatic test basket transfer, this system provides the perfect solution for component, material, and reliability testing in industry, research, and quality assurance. Main technical data: Temperature ranges: Tsdpfx Ajwx Ip Dohujf Upper test chamber: +40 °C to +240 °C Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Lower test chamber: –70 °C to +240 °C Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Optional humidity test – Upper test chamber: Temperature: +40 °C to +90 °C Relative humidity: 20% to 98% r.h. (±2–5%) Test basket transfer: Vertical movement, < 10 seconds changeover time Power supply: Total power: 16 kVA Current consumption: 32 A Main fuse: 3 × 35 A slow-blow Mains connection: 3 × 400 V / N / PE / 50 Hz Main cable: 5 × 16 mm² Water & compressed air connections: Cooling water inlet: G ¾", approx. 3 bar, max. 10 bar / max. 15 °C Cooling water requirement: max. 1.4 m³/h Cooling water return: G ¾", max. 25.2 °C Condensate drains: 2 × G ½", 1 × G ¼", unpressurized Deionized water inlet: G ⅜", approx. 3 bar, max. 6 bar Compressed air connection: Quick coupling NW 7.2 (G ¼"), min. 4 bar, max. 10 bar Dimensions & weight: Test basket internal dimensions (Type ST2K 320): Internal dimensions: Width approx. 430 mm, Height approx. 470 mm, Depth approx. 700 mm External dimensions: Width: approx. 1100 mm, Height: approx. 2300 mm, Depth: approx. 2300 mm Weight: approx. 1150 kg Other technical data: Sound level: approx. 60 dB(A) at 1 m distance (free field) Refrigerants: R-404A: approx. 2.5 kg (GWP 3800, limit value 0.48 kg/m³) R-23: approx. 0.8 kg (GWP 12100, limit value 0.68 kg/m³) Permissible operating environment: Temperature: +12 °C to +30 °C Humidity: 25%–75% r.h. For your safety as the buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change and errors reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), Heraeus / Thermo Type: WU 6100 Heat-drying oven with recirculating air 500°C Description Heat and drying oven Heraeus WU 6100 up to 500°C Recirculating air oven for thermal testing of high-quality materials. For precise heat treatment processes up to 500°C Offers precise and even temperature distribution as well as exact maintenance of the selected temperature. Technical data: Internal volume: 52 L Temperature range up to 500°C External dimensions (W x H x D): 744 x 552 x 535 mm Internal dimensions (W x H x D): 403 x 380 x 370/339 mm Weight: 53 kg 400 V 50/60 Hz 11.4 A 5.4 kW Equipment: Temperature controller with digital display Over and under temperature protection Todpfxjwq Rl Ej Ahuof Throttle for stepless fresh air and exhaust air regulation Timer Speed control for the recirculating fan Stainless steel inserts Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, specifications reserved!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), White Type: WT3-1000/40 Weiss Temperature test chamber With S!MCON / 32 control unit Water-cooled Touch panel" control unit All control and operating commands can be triggered by simply touching the function icons on the all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm L1: NW 50 mm Test chamber capacity: approx. 990 liters Tjdothhw Aspfx Ahusf Test chamber dimensions: Height 950 mm, width 1100 mm, depth 950 mm External dimensions: Height 2000 mm, width 1415 mm, depth 2105 mm Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 4500 W Data for operation: Test room lighting Halogen bulb 2x 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 22.0 A Rated power 11.5 kW On-site fuse 32 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 56 dB(A) Refrigerant: R-404A Weight: 840 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VT 4034 Vötsch Temperature Cabinet VT 4034 Air-Cooled Refrigerant: Converted to R-452 A Internal dimensions: Height 750 mm, Depth 765 mm, Width 580 mm External dimensions: Height 1780 mm, Depth 1595 mm, Width 865 mm Temperature range: -40°C to +180°C Temperature deviation: temporal ± 0.1 to ± 0.5 K spatial ± 0.5 to ± 2.0 K Heating 3.2 K/min Cooling 3.5 K/min Maximum load (evenly distributed across the surface) of the test chamber floor: 60 kg per insert: 30 kg Total load of the grate supports: 80 kg Test chamber lighting: 24 V halogen bulb 50W Rated voltage: 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Fuse provided by the customer: 16 A slow-blow Refrigerant: R-452A Weight: 490 kg / 335 liters Tjdpewd Hpajfx Ahujf For your safety, the following information! The following steps are carried out on our chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), TIRA Type: TCC 7120 Temperature range: -75°C / +180°C Air-cooled condenser Temperature stability (over time and in the center of the usable space) ±0.1°C ... ±0.3 °C Maximum temperature change rate Heating: 4°C/min Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time ±1% ÷ ±3% Dew point range for long-term tests +2 / +94 °C Dew point range for short-term tests -20 / +2 °C External dimensions (L x D x H) 1320 x 2235 x 2137 mm Test space dimensions (L x D x H) 1000 x 1130 x 1020 mm Test chamber volume: approx. 1152 liters Max. load per grid: 50 kg Maximum floor load of the test chamber: 100 kg Refrigerants: R404A and R23 Power supply: 400V + 6%/-10% / 50Hz / 3P+N+PE Rated power: 10.2 max. 17.5 kW Rated current: 19.5 max. 32.0 A Noise level: approx. 80 dB(A) Weight: 1180 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components Tsdpowfddwjfx Ahuef 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal struts to increase the floor load-bearing capacity Test chamber volume: 600 liters Tedpfx Ahowfdniousf Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety, please note the following information! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Tsdpfjw Hz Trox Ahuof Scope of delivery: (See picture) (Subject to technical modifications and errors! All provided data are subject to change!) For further questions, please feel free to contact us by phone.

Condition: used, SincoTec Model: POWER SWING 100 MOT Big Table The SincoTec POWER SWING 100 MOT is a high-performance resonance test bench designed for fatigue testing of materials and components. This system enables dynamic load testing with high forces (up to ±100 kN) while ensuring precise control. Typical applications include lifetime testing, fatigue strength testing, and component validation under realistic conditions. With its robust construction, precise sensors, and stable granite table, the test bench is ideally suited for research, development, and quality control in both industrial and academic settings. Notes: The resonance test bench is particularly well-suited for material and component testing under dynamic loads. Technical Data: General Data – Test Bench: - Overall height: 1215 mm (without clamping fixture) - Width: 2005 mm - Depth: 1205 mm - Maximum force amplitude: 50 kN - Maximum total force: ±100 kN - Sensor accuracy: at least class 1 (according to DIN EN 10002-3) Control Cabinet: - Overall height: approx. 1800 mm - Table height: 1080 mm - Width: 650 mm (narrow tabletop) / 1420 mm (wide tabletop) - Depth: 700 mm - Weight: 180 kg (with granite tabletop approx. 240 kg) - Color: RAL 9006 (white aluminum), tabletop midnight Installation Requirements: - Required space: 4.3 × 3.0 m - Minimum ceiling height: 2.5 m Tedpfxjxrlkvj Ahusf - Floor load capacity: 2.0 t/m² - Power supply: 400 V / 50 Hz (three-phase, clockwise rotation) - Connection: 5-pin CEE socket, 16 A - Fuse protection: 16 A - Weight: approx. 3.6 t Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data; all information provided without guarantee!) If you have any further questions, please do not hesitate to contact us by phone.

Condition: used, Vötsch Model: VCS 7034-5 Climatic Test Chamber, Water-Cooled Test chamber volume: 335 liters Specifications for temperature testing: Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 K Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Specifications for climate testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Tedpfx Aexqzbbehusf Heat compensation: 400W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as a buyer, please take note of the following information! The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and error) If you have further questions, we would be happy to answer them by phone.

Condition: excellent (used), Liebisch Type: K1000 M-TR / 4203.6101 USED Liebisch K1000 M-TR Constacon – Manual Chest-Type Apparatus Corrosion/Condensation Test Chamber (Chamber volume: 1000 l) Item Description: For sale is a used Liebisch K1000 M-TR, a robust and high-quality chest-type unit designed for conducting condensation water tests. Ideally suited for laboratories, quality control, or industrial applications. Technical Specifications & Features: Model Variant: Constacon K 1000 M-TR – Condensation Water Unit without Ventilation Chamber volume: approx. 1000 liters Tedpfew Tbdpox Ahusf Operation mode: Manual (Type M-TR) External dimensions (W x D x H): 2600 × 1120 × 1210 mm Internal chamber dimensions (W x D x H): 1535–1425 × 800–780 × 660–650 mm Testing standards: For condensation (Constacon): DIN 50958, DIN EN ISO 6270-1/-2 Control: Simple manual control panel – parameters such as temperature and operation mode are set directly on the device. Temperature regulation: PID controlled, typical setpoints: Condensation tests: approx. 40 °C (up to max. 50 °C) Heating time: approx. 1 hour Weight: approx. 400 kg Condition: used Scope of delivery: (see picture) (Specifications and information are subject to change and error!) For further questions, we are happy to assist you by phone.