Used material testing for sale (467)

Condition: excellent (used), For sale: Professional, portable vibration calibrator from the renowned manufacturer PCB Piezotronics. Model: 394C06 Serial number: LW19236 Made in: USA The calibrator is designed for rapid verification and calibration of accelerometers in industrial, laboratory, and automotive (NVH) applications. — Technical and visual condition The device is in very good condition and well-maintained. Dodpfx Afjyc Igve Ujki Manufacturer's seal is intact (VOID IF SEAL DAMAGED). Normal, minimal signs of use. The equipment comes from a professional measurement environment. — Features and characteristics • Portable vibration calibrator • RMS / PEAK mode • CAL adjustment (+ / -) • Stable reference signal for sensor verification • Battery powered – ideal for field work • High repeatability and measurement accuracy — Applications • Accelerometer calibration • NVH systems (Noise, Vibration, Harshness) • Industry, automotive, laboratories • Maintenance, quality control — Included in the set • PCB Piezotronics 394C06 calibrator • Original transport case • Protective cover • Adapters / mounting accessories (as shown in the photos)

Condition: excellent (used), Primus Engineering Type: DST 350 Dedpjrt U Nujfx Af Ueki This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Amboss + Langbein Industrial Drying Oven Amboss + Langbein WTS 20 3B – 80°C – 400 V – 5 kW For sale is an industrial drying oven / heat drying cabinet from the manufacturer Amboss + Langbein, model WTS 20 3B. This unit is ideally suited for drying, heating, and tempering workpieces, components, or materials in workshop, industrial, or laboratory environments. The drying oven features digital temperature control, a safety thermostat, and a robust industrial design with multiple stainless steel shelves. Thanks to its castors, the unit is easily movable within the facility. Technical specifications: Manufacturer: Amboss + Langbein Model: WTS 20 3B Year of manufacture: 04/2010 Operating voltage: 400 V Frequency: 50 Hz Power: 5 kW Max. temperature: approx. 80°C Dkedpfx Afsx Uz Rts Uoi Temperature control: digital Safety thermostat included CE marking Dimensions / Weight (approx.): Height: 170–180 cm Width: 80–90 cm Depth: 70–80 cm Weight: 180–220 kg Condition: used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Dsdpox Up Igsfx Af Uski Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: used, Manufacturer : Memmert Model: B 30 Type : universal oven / incubator   Dodpfx Asx R Aulef Uoki Maximum temperature : 70°C Power : 800 W Total volume : 48 L Inside dimensions : 380 x 300 x 380 mm

Condition: used, Year of construction: 2010, Manufacturer: Eratis Dkedpfex R Aqmox Af Uoi Model: ICH 600 T Year : 2010 Type : climatic chamber Cooling unit - refrigerant : R134A Power : 1,5 KW Useful volume : 600 L ( 65 x 65 x 140 cm) Temperature : +15°C to 55°C

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. Dksdpfx Afsu N Avxs Uei The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 24 kg, total height: 1,000 mm, total width: 330 mm, total length: 530 mm, The MultiTest 2.5dV is one of the most widely supplied tensile and compression test stands. The tester is robust, precise, and fully customizable with load cells, grips, and software. The MultiTest 2.5dV can be fitted with load cells ranging from 2 N to 2.5 kN, depending on your requirements. The VectorPro Lite software is highly intuitive and features a clear interface. This makes the tester suitable not only for laboratories and inspection rooms, but also for use directly in production environments. When using the software, all data is automatically stored and can be retrieved at any time. Without the software, the tester operates as a stand-alone device and can transmit measurement values to a computer in multiple ways. Djdjx Apntopfx Af Ujki The price includes a load cell of your choice, cables, delivery in the Netherlands and Belgium, commissioning, and training. We offer a 2-year warranty. The VectorPro Lite software is available for an additional €1,000, and grips are not included in the price.

Condition: excellent (used), Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber – Li-Ion CO/CO₂ −42 to +150 °C 400 V Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, model VC³ 4018/S, year of manufacture 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring as well as CO₂ inertization for enhanced operational safety. Important Note: Due to these safety features, the test chamber is software-limited to a temperature range of −42 °C to +150 °C. The chamber is ideally suited for: - Li-Ion battery testing - Electronics and assembly testing - Temperature and climate stress tests - Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feed-throughs included as standard: R1: Ø 125 mm L1: Ø 50 mm Data for temperature tests: Temperature range: -42°C to +150°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating 4 K/min Cooling 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3 % RH Heat compensation: 400 W Operating data: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Djdox Slm Hjpfx Af Uoki Refrigerant: R-404A Weight: 470 kg Important Safety Information for Buyers! The following servicing steps are performed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, new refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (See image) (Specifications and technical data are subject to change and errors are excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the advanced safety and performance test package “P Plus”. This device is not a standard laboratory incubator but a high-quality safety test chamber, specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Key Added Value: The unit is designed to reliably detect, monitor, and contain critical battery events safely—including up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the device do specifically? (Section 2 – Performance & Application) – Conduct aging tests on lithium-ion cells – Performance tests (charge/discharge cycles under temperature) Dkodpfjx Sc Insx Af Uoi – Continuous temperature runs and thermal cycling tests – Testing of non-energized and cyclically energized cells – Reproducible, precise temperature control throughout the entire usable space – Safe execution of tests under realistic thermal conditions – Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: – Battery & cell manufacturers – Research and development laboratories – Test laboratories & safety testing – Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: – Automatic & manual CO₂ fire suppression system – Smoke detector with optical & acoustic alarm – Mechanical double door locking (secure containment) – Spark protection in the interior compartment – Exhaust connection with reversible overpressure flap – Connections for external inerting (e.g., nitrogen) – Emergency stop / manual release of extinguishing system – Ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur, but not explosion or uncontrolled propagation. This is not an abuse or destruction test device, but a secure, standard-compliant test chamber for real-world operating and fault scenarios. Technical Core Data: – Temperature range: –5 °C to +100 °C – Interior volume: approx. 698 liters – Shelves: 4 × stainless steel – Max. load per shelf: 45 kg – Max. total load: 100 kg Electrical Data: – Mains connection: 200–240 V AC – Frequency: 50/60 Hz – Phases: single-phase – Power consumption: approx. 2.1 kW – Circuit protection: 16 A – Refrigerant: R134a – Protection class: IP 20 Dimensions & Weight: – External (W × H × D): approx. 1250 × 1950 × 900 mm – Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why is this device special? – Genuine battery safety test chamber – Suitable for EUCAR Hazard Level 5 – Integrated CO₂ extinguishing system – Large chamber (≈700 l) – High market value & resale attractiveness – Weight: approx. 285–300 kg – Condition: used – Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, we are happy to answer your call.

Year of construction: 1995, condition: ready for operation (used), Two walk-in climate chambers including Wolf burner are available. Heating capacity: 105kW, heating medium: oil/gas, max. oil throughput: 14.9kg/h, air volume flow: 2.78m³/h, max. external delivery pressure: 400Pa, control: PLC. Documentation available. An on-site inspection is possible. Dedpfx Afoyit Hbe Uski

Condition: ready for operation (used), A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Dedpexrukljfx Af Ujki

Year of construction: 2001, condition: ready for operation (used), Various machines for laboratory use and pilot processes are available. 1) 2x Bioreactor system B. Braun Biotech Biostat 15L/Biostat C-CDU, year of construction: 2001, useful volume: 15l, control: Biostat C-CDU 1137. 2) Forced-air drying cabinet Heraeus (Kendro) UT 20, useful volume: 210l, internal dimensions X/Y/Z: approx. 610mm/510mm/680mm, max. temperature: 250°C, machine dimensions X/Y/Z: approx. 770mm/940mm/800mm. 3) Ultra cryostat Lauda K 75 with a cooling thermostat Lauda RUK 40S, bath volume: approx. 30l, min. temperature: -90°C. 4) Centrifuge CEPA 8L G, year of construction: 1985, speed: 17000rpm, drum diameter: 125mm, max. filling capacity: 10kg, power: 2.2kW. Documentation available. An on-site inspection is possible. Sale of individual units possible. Dkjdpfsxvdfmsx Af Uei

Year of construction: 2016, condition: ready for operation (used), An almost new Anritsu X-ray inspection system is available. X-ray power: 100W, max. detection width: 240mm, max. detection height: 120mm, detection speed from 2kg to 5kg: 10m-60m/min, detection speed up to 2kg: 60m-90m/min, detection speed from 5kg to 10kg: 10m-40m/min, housing material: stainless steel, machine weight: approx. 255kg, operating hours: less than 50h. The machine shows no wear on the conveyor belt or the radiation protection curtains. Documentation available. On-site inspection is possible. Dkodpfovzr Auex Af Uji

Year of construction: 2019, condition: ready for operation (used), A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000. Dedpfx Ajt Daq Ujf Ueki

Year of construction: 2018, condition: ready for operation (used), A complete Anritsu X-ray system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal separator KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. output: 80 products/min. 4) Material feed through Jöst FDL 350/60x500 vibratory feeder. Documentation available. Djdpfjt Dpn Ajx Af Ujki

Year of construction: 2017, condition: ready for operation (used), A portable surface roughness measuring device Mitutoyo including a granite plate is available. Measurement range X: 17.5mm, measurement range Z: -200µm-160µm, Z resolution: 0.002µm, measuring speed: 0.5mm/s, return speed: 1mm/s, granite measuring table dimensions X/Y/Z: 400mm/250mm/70mm. Documentation available. An on-site inspection is possible. Dedpfx Afoya Hx So Uoki

Condition: ready for operation (used), Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible. Dodpfxsxhntls Af Ujki

Year of construction: 2015, condition: ready for operation (used), An X-ray inspection device Mekitec for the food industry is available. Measurement device type: Rad Eye B20, max. power: 60kV/1.66mA/100W, method: inline inspection, test object: packaged food products, tunnel clearance X/Y: approx. 250mm/100mm, belt length: 1200mm, belt width: 250mm, max. belt speed: 1.3m/s, max. product weight: 5kg, machine dimensions X/Y/Z: approx. 2000mm/550mm/1200mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Dedpfx Aoxnp Scef Uski

Condition: ready for operation (used), An Alpha viscometer for testing raw elastomers and rubber compounds is available. Test standards: ASTM D1646/D3346, max. temperature: 200°C, rotational speed: 2rpm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Dsdpfsxrukrjx Af Uoki

Condition: ready for operation (used), An Alpha rubber process analyzer for testing the rheological and dynamic properties of elastomers and rubber compounds is available. Frequency range: 0.1-3000cpm, max. temperature: 230°C, max. heating rate: 1°C/s, max. cooling rate: 0.5°C/s, max. strain: +/-90°, test standards: ASTM D5289/D6048/D6204/D6601/D7050/D7605/D8059. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Including PC with Eclipse software and spare parts. Documentation available. On-site inspection possible. Dsdpfxjxrukxj Af Uski

Year of construction: 2018, operating hours: 1,448 h, condition: excellent (used), Advanced X-ray inspection with the perfect balance of high performance detection sensitivity and low operating costs Advanced X-ray detection that strikes the balance between optimal sensitivity and economic operation. Suitable for a wide range of products, this X-ray inspection system can be adapted to virtually any application. -GA (Genetic Algorithm) image processing optimises detection for individual customer requirements -Integrated air conditioning system -User-friendly 17” touch screen control Technical data in attached leaflet Dkodoynzaajpfx Af Uoi

Condition: used, Measurement data acquisition device, test device, telemetry system -Axon: J1-CS10 Torque Telemeter -Dimensions: 205/60/H110 mm Dedpfxofg E Has Af Ujki -Weight: 0.8 kg

Condition: good (used), Clamping jaws for round samples Dkjdpfxjmiqm Se Af Uji -Manufacturer: VAS, Clamping jaws for round samples, 4 pieces -Type: 15-30 mm -Dimensions: see photo technical drawing -Case dimensions: 270/230/H80 mm -Weight: 6.2 kg

Condition: used, Inductive conductivity transmitter, conductivity transmitter, conductivity measurement -Manufacturer: EH Endress Hauser, conductivity transmitter -Type: conducta XR 2 -100434-0100 -Measuring range: 0 to 100% Dkodpfx Asldk I Djf Uei -Voltage: 220V 50/60Hz -Dimension: 180/95/H95 mm -Weight: 0.8 kg