Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 21,000 rpm, number of axes: 4, This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document). Machine Benefits Technical Machine Benefits Hedpfox D N Ntox Aaljfd • 4 cnc axes, with chick horizontal axis dividing head and support bearing. • 21 tools • X =m 500 mm / y = 400 mm / z = 330 mm • Central coolant system with pump and filtration • Oil tank.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 630 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 450 mm, controller manufacturer: SIEMENS, controller model: 840D solution line, number of axes: 3, This 4-axis CHIRON DZ18W was manufactured in 2018. Ideal for precision vertical machining, this model offers robust construction and reliable performance. Consider the opportunity to buy this CHIRON DZ18W vertical machining centre. Contact us for more information. Additional equipment • OPTIONAL: robot, entire cell including conveyor belts, PLC, turning station Machine Benefits Technical Machine Benefits • Tool positions: 2x35 • Tool length max: 380 mm Extra Information Splash guard panel with fully enclosed work area/ with loading door, electrically protected/ including replaceable safety windows/ Work area partition with stainless steel louvres/ Height 2340 mm above floor, including machine light/ Mini control panel with start and reset button for M61/M62 pallet organization/ Integrated workpiece changing device IWW 0/180°/ for optimal chip flow with center partition made of sheet steel/ Workpiece changing time approx. 3.5 seconds, weight-dependent, self-regulating/ thanks to self-learning speed control./ Transport load per side 0 - max. 250 kg/ Max. 120 kg weight difference between the two table sides./ Each table side is prepared for the installation of a rotary table package./ Distance between spindle mount and swivel center/point /WW minimum 75 mm/ Travel paths: X-axis 630 mm/ Y-axis 530 mm/ Z-axis 450 mm/ Tank flushing system with coolant connection/ NC rotary table, type ATU 200/ Integrated into the integrated workpiece changing device IWW 0/180°/ With hydraulic clamping, holding torque 1,200 Nm,/ Repeatability +5" with/ faceplate © 225 mm, with centering® 60 -0.008,/ Counter bearing with hydraulic clamping, holding torque 800 Nm./ On the rotary table and counter bearing side. Swivel radius 285 mm/ 7th or 5th NC axis, plug-in ready/ Regulated pneumatic connection for sealing air/ Controlled hydraulic connection for clamping./ Rotary feedthrough 2 x 5-way/ Rotary table side: 4 x hydraulic/pneumatic, 1 x Pneumatics/ 4 x hydraulic/pneumatic on the counter bearing side, 1 x pneumatic/ Working area - rotary table assignment/ AF1 Rotary table ATU 200/ AF2 Rotary table ATU 200/ Double-spindle headstock/ Prepared to accommodate 2 main spindle motors with spindles/ Spindle distance in X-axis 400 mm/ Main spindle drive with 2 AC motors/ Air-operated, with tool clamp monitoring/ 11.0 kW at 100% duty cycle/ 25.3 kW at 15% duty cycle/ Speed up to 12,000 rpm/ Max. torque 140 Nm/ Drilling capacity 2 x 42 mm/ in steel E355/ Automatic tool changer/ with robust, fully encapsulated pick-up chain magazine/ 2 x 35 tool positions/ HSK-A 63 DIN tool shank 69893/ Hedpfx Asx D Nmfsaljfd Tool width max. 78 mm/ Tool width with free adjacent positions max. 140 mm/ Tool length max. 380 mm/ Tool weight max. 8.0 kg (max. magazine load 240 kg)/ Tool change time approx. 0.9 s (control system dependent)/ Soan-to-chip time approx. 2.2 s (control system dependent)/ Feed drive for X, Y, and Z axes/ Digital drives with direct position measuring systems, overpressure application/ Rapid traverse speed 75 - 75 - 75 m/min/ Axis acceleration 1.0 - 1.4 - 1.6 g/ SIEMENS CNC control 840D solution line/ incl. 10.4" TFT color screen / full keyboard / operator panel OP010S/ 1280 1 (TCU / NCU 720.3, 1 channel)/ User interface Operate/ NC RAM 3 MB (max. 1 MB available)/ (max. 200 programs available)/ for running part programs according to DIN 66025/ CF card with 8 GB storage capacity (max. 3 GB available)/ Power display, operating hours and workpiece counter on the screen,

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. • Machine hours (as shown on the screen): • Power On: 25,416 h Hjdpfxox D I Stj Aaljfd • Cycle Start: 8,164 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 positions (side-mount) • CNC control: Haas CNC Control

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,500 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, table load: 1,800 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VM30I was manufactured in 2019. It features a table size of 1320 × 508 mm and a maximum table load of 1,800 kg. With an impressive X travel of 1270 mm, Y travel of 508 mm, and Z travel of 508 mm, this vertical machining centre is designed for high-quality machining capabilities. Consider the opportunity to buy this Hurco VM30I vertical machining centre. Contact us for further details. • Table size: 1320 × 508 mm • T-slot size: 5 × 18 mm • Max spindle torque: 82.3 Nm @ 1740 rpm • Tool changer: 24-position random arm ATC • Max tool diameter: 80 mm • Max tool length: 250 mm • Rapid traverse: 28 m/min • Through-spindle coolant: 20 bar • Spindle chiller • Control: WINMAX 5 CNC with dual screens • Air-conditioned electrical cabinet • Electronic handwheel • RJ45 & USB ports • 3-color status light • Coolant and air guns Hedpeyq Nz Refx Aaljfd • Dimensions: 4100 × 2500 (3300) × 2550 mm • Condition: Excellent Additional equipment • Screw chip conveyor • Machine vise • Set of tool holders • 3D probe • Documentation (CD-ROM) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,186 h, controller manufacturer: HEIDENHAIN, controller model: ITNC530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DMG MORI DMU 60 MonoBlock was manufactured in 2010. It features a 60-tool automatic tool changer, a maximum spindle speed of 12,000 RPM, and SK40 tool holder. Additional features include a Heidenhain TS649 probe, 3D quickSET, and 40 bar through-spindle coolant. Ideal for complex and precise machining tasks. Located in Iceland, contact us for more information about this machine. • Through-spindle coolant: 40 bar • Spray gun • Electronic handwheel • BA4 mode Additional equipment • Heidenhain TS649 touch probe • 3D quickSET (calibration/checking system) Hfedpox D Iirefx Aaled Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: HEIDENHAIN, controller model: iTNC640, spindle speed (max.): 42,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 32, This 5-axis OPS INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain Control TNC 640, a high-frequency spindle with a speed range up to 42,000 rpm, and a 32-slot HSK-E40 tool changer. The machine offers a traversing speed of 30m/min and traversing paths of 550x400x400 mm. If you are looking to get high-quality milling capabilities consider the OPS INGERSOLL High Speed Eagle V5 machine we have for sale. Contact us for more information. • Max. acceleration: 15 m/s² • Max. traversing speed: 30 m/min • Control cabinet ambient temperature: up to 33 °C (with heat exchanger) • Traversing paths (X/Y/Z): 550 x 400 x 400 mm • Drive system: Ball screw spindles with directly coupled AC servo motors • Measurement system: Absolute glass scales on all axes Hjdpjx D Ektofx Aalofd • Torque (S6 60%): 6.7 Nm

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: HEIDENHAIN, controller model: TNC 426/430M, This 4-axis DECKEL MAHO DMU 60 T was manufactured in 2001. It features a Heidenhain TNC 426/430M control, a working area of 630x530x630 mm, and a spindle speed of 12,000 rpm. The swivel B axis can rotate 180 degrees, and it includes two tool magazines with 12 positions each. Consider the opportunity to buy this DECKEL MAHO DMU 60 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Hfjdpfxeyaqdxe Aaled • Milling time: 29633 hours/ machine on time: 79606 hours • Swivel b axis: 180 degrees • Two tool magazines with 12 positions each / laser tool measurement for length and diameter "blum" • Spindle speed: 12000 rpm • Working area dimensions: 630x530x630 mm

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: FANUC, controller model: Series-31i, spindle speed (max.): 10,000 rpm, This 5-axis FANUC ROBODRILL α-D21LiB5 was manufactured in 2018. Ideal for precision machining, this vertical machining centre ensures reliable performance. Consider the opportunity to buy this FANUC ROBODRILL α-D21LiB5 vertical machining centre. Contact us for more information. Additional equipment • Oil Mist Extractor Machine Benefits Technical Machine Benefits • High torque spindle drive • Versatile tool measurement and probing systems • Advanced control features for smooth operation and precise contour control • Comprehensive cooling and chip management systems • Spindle drive: bbt/bt 30, high torque • Two-axis rotary table: tsudakoma twa-160 with drives Hsdpfx Aoyaqfijaljfd • Wireless tool measurement probe: metrol rc-k3e • Part probing system: metrol td1 • Tool magazine: 21 positions, bbt/bt 30 Extra Information Media Through-Spindle Coolant System: 25 bar Work Area Flushing System Coolant Tank Capacity: 250 liters Chip Tank Interface for Washdown Gun Connection Options included are rotary/tilting table, chip conveyor, high-pressure coolant pump, part probe, and oil mist extractor.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 640 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 828, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis KNUTH XMILL 640 was manufactured in 2015. It features a Siemens 828 control, a spindle speed of 8,000 rpm, and a BT40 spindle taper. The table size is 750 × 360 mm, and it includes an 18-tool changer. If you are looking to get high-quality milling capabilities, consider the KNUTH XMILL 640 machine we have for sale. Contact us for more information. • Rotary axes: No • Tool changer: 18 tools • Table size: 750 × 360 mm • Optical scales: No • Other options: 20 bar through-spindle coolant Hsdpfjyct Avjx Aaljfd Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: HEIDENHAIN, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 eVolution was manufactured in 2002. Ideal for complex machining tasks, this vertical machining center ensures precision and versatility in a compact footprint. Consider the opportunity to buy this DECKEL MAHO DMU 50 eVolution vertical machining center. Contact us for more information. Machine Benefits Hfsdsyaimxjpfx Aaljd Technical Machine Benefits • This summary includes only the relevant information as per the provided details and instructions. Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, number of axes: 3, This 3-axis DECKEL MAHO DMU 200T was manufactured in 2001. It features a Heidenhain TNC 426 control, a spindle speed of 5000 rpm, and movement lengths of X: 1800 mm, Y: 2000 mm, Z: 1100 mm. It also includes an HSK-E32 tool holder with 60 slots. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 200T machine we have for sale. Contact us for more information. Extra Information Hjdpfoyair Iox Aalofd Machine still under power

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,346 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, number of axes: 3, This 3-axis DOOSAN NX 6500 II was manufactured in 2019. It features a Heidenhain TNC 640 control, a table size of 1200 mm by 650 mm, and travels of 1050 mm in X, 650 mm in Y, and 650 mm in Z. The spindle reaches up to 20,000 rpm, and the tool magazine holds 30 positions. If you are looking to get high-quality milling capabilities consider the DOOSAN NX 6500 II machine we have for sale. Contact us for more information. • Table Length: 1200 mm • Table Width: 650 mm • Maximum Spindle Speed: 20000 rpm Hodpfxex Uq Hdj Aalsfd • Spindle: EPM spindle made in Germany • Spindle Taper: ISO 40 dual contact • Tool Magazine Capacity: 30 positions • X, Y, Z Axis Scales • Linear Guideways (LM guide) • MPG Handwheel • Operation and Maintenance Manuals Included

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,100 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, table load: 1,100 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis Wele AA1165 was manufactured in 2014. A vertical CNC machining center featuring a Fanuc 0i-MC control, it offers X/Y/Z travels of 1,100 mm, 650 mm, and 600 mm respectively. Rapid feeds reach up to 24 m/min, with a spindle speed of 15,000 rpm. The table supports loads up to 1,100 Kg. Consider the opportunity to buy this Wele AA1165 vertical machining center. Contact us for more information about this machine. • Status: Excellent • Rapid feed (X/Y/Z): 24 / 24 / 20 m/min • Distance table–spindle nose: 125–725 mm • Table size: 1,300 x 650 mm • Tool turret: 24 positions • Notes: Spindle recently replaced Additional equipment • Chip evacuator (chip conveyor) Technical Specification Taper Size BT 40 Hfsdpfxoygmd Ue Aaljd

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 5, This 5-axis HAAS UMC-750SS vertical machining center was manufactured in 2021. Consider the opportunity to buy this HAAS UMC-750SS vertical machining center. Contact us for more information. Additional equipment • Coolant tank – 208 liters with mobile cart • Programmable coolant pump (M-code controlled) // Programmable Coolant Nozzle (P-COOL) • Safe Run – crash and overload detection system • Control cabinet surge protection • Voltage fault detection module (EPFDM) • Second Home Position button • Remote Jog Handle with 2m cable (RJH-XL) • Memory lock key-switch • Rotary axis scales • Top cover Machine Benefits Technical Machine Benefits • 30+1 tool side-mount tool changer • Wireless intuitive probing system (wips) • Broken tool detection (btd) Hedpsx U Tizsfx Aaljfd Extra Information Media display via M130 (images, videos, PDF on screen) Standard machine memory: 1 GB Control Unit 15" color LCD monitor with USB port Touchscreen control interface Ethernet interface HaasConnect remote monitoring HaasDrop wireless file transfer WiFi connectivity Controller High-speed machining (HSM) Rigid tapping Dynamic Work Offsets / Tool Center Point Control (DWO/TCPC) Macro programming, coordinate rotation & scaling

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,743 h, controller manufacturer: HEIDENHAIN, controller model: 417, This 3-axis MIKRON VCP 600 was manufactured in 2004. It features a high-performance spindle with speeds up to 20,000 rpm and a robust 30-slot tool changer. The working range is 600 x 450 x 450 mm, supporting a maximum workpiece weight of 500 kg. Ideal for precise machining of metals and alloys, it offers stable construction and efficient cooling. Consider the opportunity to buy this MIKRON VCP 600 vertical machining centre. Contact us for more information. • Maximum workpiece size: 840 x 600 x 500 mm Hfsdpfx Ajx Imtyealjd • Maximum workpiece weight: 500 kg • Spindle operating time: 5.743 hours • Tool changer: 30 tools • Positioning accuracy: ±3 µm • tool clamping system HSK 63 • Key features: • Versatile applications: precise machining of a wide range of materials • High-performance spindle for fast, precise machining • Stable, robust construction for high accuracy with heavy workpieces • Automation-ready: integrated features for automated tool and workpiece changes • Efficient cooling system for optimized performance and tool life • Application: Ideal for tool and mold making and the production of high-precision components across various industries Additional equipment • m&h 3D probe • Vise: not included

Condition: ready for operation (used), Year of construction: 2000, operating hours: 5,374 h, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 540 mm, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hurco BMC 2416 vertical machining center was manufactured in 2000. It features a robust Ultimax control system, a spindle speed of up to 8000 rpm, and rapid traverse rates reaching 24003 mm/min. With a tool magazine of 24 positions and generous travels in X, Y, and Z dimensions (610, 406, 540 mm respectively), consider the opportunity to buy this Hurco BMC 2416 vertical machining center. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max rapid traverse: 24003 mm/min • Max contour feed: 7620 mm/min • Tool positions: 24 Extra Information Hfodox D Nz Nopfx Aalsd Machine still under power

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,050 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VCN 510C was manufactured in 2003. It features a spindle speed of 12,000 rpm with an SK40 taper and a tool magazine with 30 positions. The table size is approximately 1300 × 550 mm, and it includes a cooling system with 15 bar internal pressure. Consider the opportunity to buy this Mazak VCN 510C vertical machining centre. Contact us for more information. • Tool magazine: 30 positions • Control: Fusion • Table size: approx. 1300 × 550 mm Hfsdpfx Asx Enlrsaljd • Cooling: 15 bar internal (through-spindle) pressure Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,737 h, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, controller manufacturer: RÖDERS, controller model: RMS 6 V3.6, number of axes: 3, This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine. Machine Benefits Technical Machine Benefits • Machine hours: 60737 hours since 2016 Extra Information Hedpfx Asx D Rgmealofd Machine still under power

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,145 mm, travel distance Y-axis: 615 mm, travel distance Z-axis: 615 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Pinnacle LV116 vertical machining center was manufactured in 2008. It offers robust and precise machining capabilities, ideal for a variety of applications. If you are looking to get high-quality milling capabilities, consider the Pinnacle LV116 machine we have for sale. Contact us for more information. OPTIONAL: Vices and toolsAdditional equipment • Equipment: Automatic tool changer, coolant system with internal cooling Hedox D Rpujpfx Aaljfd

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: WINMAX, total height: 3,240 mm, table load: 2,000 kg, overall weight: 7,950 kg, spindle speed (max.): 12,000 rpm, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VMX50i was manufactured in 2021. It features a robust SK40 spindle, capable of reaching speeds up to 12,000 rpm, and a large table surface of 1500 x 660 mm supporting up to 2000 kg. With X/Y/Z travels of 1270/660/610 mm and rapid traverse rates of 32/32/24 m/min, it's ideal for dynamic machining tasks. Includes a 30/40 position automatic tool changer. Contact us for more information about this machine. • Spindle face to table: 101–711 mm • Table working surface (W x D): 1500 x 660 mm • Table T-slots (DIN 650): 6 x 18 x 100 • Automatic tool changer (ATC) positions: 30/40 • Machine status: Powered and in operation • Total machine hours: 6700 Additional equipment • Chip conveyor • Mist collector • External emulsion tank with filtration for internal tool cooling • Including workpiece and tool probes • Programming extensions dwg-dxf Hfedpex D E Acjfx Aaled Dimensions Machine Depth 5059 mm

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 550 mm, controller manufacturer: FANUC, controller model: 0i-MD, table width: 1,200 mm, table length: 600 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 7,000 g, number of axes: 4, This Dugard 1000Y Plus was manufactured in 2011. It features a table size of 1200 × 600 mm, a maximum table load of 600 kg, and a tool magazine capacity of 24 tools. The machine includes a fourth rotary axis and is equipped with a FANUC 0i-MD control. If you are looking to get high quality milling capabilities consider the Dugard 1000Y Plus machine we have for sale. A large set of accessories and equipment is included. Contact us for more information. • Table size: 1200 × 600 mm • Spindle taper: ISO 40 • Through-spindle coolant system • Tool magazine capacity: 24 tools • Most common control: FANUC 0i-MD Additional equipment • Fourth rotary axis included • Tool and workpiece measuring probe Hfedpex D Hdbjfx Aalsd • Extra coolant feeder • Air gun hose for compressed air cleaning • A set of accessories and equipment is included Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2016, operating hours: 11,898 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840 Dsl - ShopMill, overall weight: 5,450 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DMG ecoMill 800 V was manufactured in 2016. It features a robust SK40 spindle with a speed of 12,000 rpm and a 30-station tool magazine. The machine supports a maximum workpiece weight of 800 kg and includes a built-in coolant system with a high-pressure 20 bar filter. Additional features include a swarf conveyor and Renishaw touch probe. If you are looking to get high-quality milling capabilities, consider the DMG ecoMill 800 V machine we have for sale. Contact us for more information. • Tool magazine capacity: 30 stations Hjdpfx Aex D H Dhealjfd Additional equipment • Coolant system with filter, high-pressure 20 bar • Coolant tank capacity: 600 l • Swarf (chip) conveyor • Renishaw OTS • Renishaw touch probe

Condition: ready for operation (used), Year of construction: 2001, operating hours: 14,336 h, controller manufacturer: HAAS, controller model: n/a, total height: 1,473 mm, table load: 1,350 kg, number of axes: 3, This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine. • Clamping surface: 660 x 356 mm • T-slot width: 14 mm • T-slot spacing: 125 mm • Tool change operations: 321250 timesMachine still under power Additional equipment Hfodpfxsx D Eg Uj Aalsd • Note: 4th axis is available but defective; power unit for AC servo motor for HRT160 must be replaced. Dimensions Machine Depth 2357 mm Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 3,425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, number of axes: 3, This 4-axis MECAL MC 305 vertical machining center was manufactured in 2008. It features a high-power electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The machine offers a large working range up to 8000 mm and includes a centralized minimal cooling system. If you are looking to get high-quality milling capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for more information. • A (rotation): ±125° • Spindle: • Type: Electric spindle, air-cooled • Tool magazine: • Location: Center of machine base, protected area • Capacity: Various tools (milling cutters, taps, end mills, angle grinders) • Construction: • Electrowelded structure for maximum rigidity • Linear guides with ball screws • Automatic central lubrication of guides and spindles • Cooling: Hfjdpex D Izhsfx Aaled • Centralized minimum quantity lubrication system • Working range: • Standard workpiece length: up to 4000 mm • Extended (differential cycle): up to 8000 mm

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 3,425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2004. It features a powerful 5.5 kW electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The tool magazine is centrally located, protected, and supports various tools. It has a standard workpiece length up to 4000 mm and an extended range up to 8000 mm. Contact us for more information about this machine. • A (rotation): ±125° • Spindle Type: Electric, air-cooled • Tool magazine: • Located in the middle of the machine base in a protected area • Accommodates various tools: milling cutters, taps, end mills, angle heads • Construction: • Welded steel structure for maximum rigidity • Linear guides with ball screws • Automatic central lubrication of guides and screws • Cooling: Centralized minimum lubrication system (MQL) • Working range: • Standard workpiece length: up to 4000 mm • Extended range (differential cycle): up to 8000 mm Hfjdjx D I Hkepfx Aaled