Used Cnc Vertical Milling Center for sale (28,395)

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Ledsw Ed U Njpfx Al Iern Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Lsdpfx Aljk Iugze Iern

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Lrjdstrhq Hspfx Al Ijn Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp Lrjdow Nklhopfx Al Ien - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Ljdpsy N Du Dofx Al Isrn Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: used, Year of construction: 2019, chuck diameter 500 mm swing diameter over bed slide 700 mm control Siemens travel -x axis 630 mm travel -z axis 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT Lrjdpfx Ajx Szlrel Ion

Condition: used, Year of construction: 2019, travel -x axis 900 mm travel -y axis 200 mm Lodpfex Szmvex Al Isrn travel -z axis 800 mm B-axis swival range ° positioning accuracy C: 9 '' control SIEMENS number of spindle speeds 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315 The machine is in very good condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PV315 | PV-315

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Ljdpfxsy H Igre Al Iorn Video of machine in operation available

Condition: new, Year of construction: 2026, functionality: fully functional, turning height: 2,300 mm, workpiece weight (max.): 12,000 kg, turning diameter over cross slide: 2,650 mm, turning diameter: 2,700 mm, faceplate diameter: 2,000 mm, total height: 7,100 mm, total width: 5,500 mm, total length: 8,500 mm, rotary table diameter: 2,000 mm, rotational speed (max.): 250 rpm, rotational speed (min.): 1 rpm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, table load: 12,000 kg, table diameter: 2,000 mm, warranty duration: 24 months, overall weight: 63,000 kg, faceplate torque: 43,000 Nm, repeat accuracy: 0.015 mm, REM SCR 27 1SF — CNC Vertical Turning & Milling/Drilling Center 🔴 MACHINE CURRENTLY UNDER ASSEMBLY — DELIVERY MAX 3 MONTHS 🔴 24-MONTH WARRANTY — LONGEST IN ITS CLASS Lrsdpfx Alszb Ufvs Ijn 🔴 UNBEATABLE PRICE FOR EUROPEAN CNC QUALITY ━━━━━ MACHINE HIGHLIGHTS ━━━━━ ✓ Complete turning + milling + drilling in ONE setup ✓ 12-Station ATC — bi-directional, 30 sec tool change ✓ Live spindle ISO 50 — 5 to 2,500 RPM | 37 kW ✓ C-Axis for full contour milling ✓ FANUC 0i-TF PLUS CNC — global support ✓ Heidenhain absolute measuring system (X: LC 195F) ✓ CE certified, full enclosure 3,300mm height ✓ Heavy-duty Meehanite cast iron structure ━━━━━ TECHNICAL SPECIFICATIONS ━━━━━ • Max Machining Diameter: 2,650 mm | Swing: 2,700 mm • Max Machining Height: 2,300 mm • Table Diameter: 2,000 mm (8 T-slots + 4 clamping jaws) • Max Workpiece Weight: 12,000 kg • Table Speed (turning): 1–250 RPM • Main Motor: 100 kW FANUC servo | Torque: 43,000 Nm • Ram Cross Section: 250×250 mm • X/Z Rapid Feed: 10,000 mm/min | Feed: 0.02–6,000 mm/min • X/Z Thrust Force: 35,000 N • ATC: 12-station disc | Max tool Ø 300mm | L 400mm • Coolant: 2,000 L tank | External 10 bar | Through-spindle 40 bar • Chip Conveyor: SARIGÖL hinged, 500mm wide • Accuracy: ±0.020 mm/m | Repeatability: ±0.015 mm • Electrical: 400V/50Hz | 140 KVA | Fanuc 0i-TF PLUS • Weight: 63,000 kg | 8,500×5,500×7,100 mm ━━━━━ IDEAL APPLICATIONS ━━━━━ Large gear blanks | Ring gears | Wind energy hubs & rings Heavy castings & forgings | Oil & gas flanges Mining equipment components | Aerospace large parts ━━━━━ COMMERCIAL TERMS ━━━━━ Delivery: MAX 3 MONTHS from order Warranty: 24 MONTHS parts + labor Incoterms: EXW Bacău, Romania Payment: 50% advance + 50% before shipment Installation & commissioning: included Manufacturer: REM Bacău, Romania

Condition: like new (used), Year of construction: 1985, Parts shown by hand not come. Ledjgw Shrspfx Al Iern 4 axis not come with machine.

Condition: like new (used), Year of construction: 2002, Parts shown by hand not come Lrjdpfsk It Utsx Al Ien

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Lrjdpjquhbgjfx Al Ion Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,808 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, New auction due to buyer's payment default! TECHNICAL DETAILS Working Area Swinging diameter over bed max.: 920 mm Swinging diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Speed max.: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Speed max.: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Arbor cross-section: 25 mm Speed of driven tools max.: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & Weight Machine height: 2,000 mm Footprint: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,808 h Power-on hours: 11,311 h EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Lodpfxjzck Txe Al Isrn Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Ljdozcwylspfx Al Ijrn Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Lodpfxszdrzxj Al Iern Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: excellent (used), Year of construction: 2019, Table size 3500 x 820 mm, table load 2500 kgs, traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, Lredpfjzd Eqajx Al Ijn 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2020, 2020 Vulcan TC250M CNC Turn/Mill Slant Bed Lathe With Fanuc Series Oi-TF Plus Control Auto Strong N-210 Ø250mm 3 Jaw Power Chucks. Swing Over Bed Ø600mm. Maximum Turning Ø316mm. Working Length 435mm. Spindle Bore Ø77mm. Bar Capacity Ø65mm. Axis Travel 'X'=185mm, 'Z'=490mm. Rapid Traverse 'X'=30m/min, 'Z'=30m/min. Cutting Feed Rate 0.001-500mm/rev. Speed Range 25-3,000rpm (11/15kW Motor). Spindle Nose A2-6. Driven Tool Speed Range 25-4,000rpm. Sauter 12 Position Turret, Turning Tool Shank 25 x 25mm. Internal Turning Tool Shank Ø40mm. Tailstock Travel 380mm, Quill Ø75mm, Quill Stroke 85mm, MT4 Taper. Run Hours 2,139. S/No. 25S1001 (2020). NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice. Lodpjzfqflefx Al Isrn With Coolant System (190L Tank), Chip Conveyor, Filtermist S800 Mist Extraction Unit, Programmable Tailstock, Parts Catcher, Tool Setting Arm, Quantity Of Assorted Driven Tool Unit, Turning Tool Holders, Foot Switch, Signal Tower & Manuals. Overall Dimensions L3,160 x W1,805 x H1,935mm. Approx Weight 5,000kg. NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice.

Condition: excellent (used), Year of construction: 2017, Maximum turning diameter 300mm, maximum turning length 510mm, spindle speed 6,000rpm, milling speed 6,000rpm, sub-spindle speed 6,000rpm, main spindle bar capacity 42mm, 2 X 12 station turrets, spindle power 11Kw, Y axis + /- 32mm, swarf conveyor, coolant., Fanuc OI-TF. barfeed unit. Ljdpfx Alszcy S Re Ijrn

Condition: good (used), Year of construction: 2015, Maximum turning diameter 255mm, distance between collet chucks 639mm, swing over bed 270mm, spindle speed 4,000rpm, milling speed 6,000rpm, Ljdpjzcy Ilefx Al Iern sub-spindle speed 5,000rpm, main spindle bar capacity 66mm, sub spindle bar capacity 52mm, 3 X 12 station turrets, spindle power 15Kw, Y axis + /- 40mm, swarf conveyor, coolant., Fanuc 31i.

Condition: used, Year of construction: 2000, Hardinge VMC 600 II CNC Vertical Machining Centre with Fanuc Series O-MD CNC Control, Table Size 750mm x 500mm, 20 Tool ATC, BT40 Spindle Taper, Manuals & BT40 Spindle Tools. S/No. NVAAOF0060 (2000) Ljdpozdtkhjfx Al Iern Location: This lot is located in Burton on Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2018, 2018 Haas ST-25 CNC Slant Bed Lathe Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018). Lrjdpfx Alezc Id Us Ion With Coolant System (Tank Capacity 208L), Tool Setting Arm, Tailstock, Jorgensen Chip Conveyor, Footswitch & Signal Tower.

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, milling speed 4,500rpm, milling power10Kw, Lrjdpfx Aezaz Uzsl Ijn sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Y axis -51/+51mm, 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: KMM 334-2052, Used CNC Vertical Machining Centres – 3-axis CNC (X/Y/Z) X travel: approx. 800 mm Y travel: approx. 400 mm Z travel: approx. 350 mm Lsdpfx Aleyklx Se Iern Control: Siemens 840D Tool magazine: approx. 42 positions (depending on equipment) Spindle taper: HSK 63 Max. spindle speed: ~10,500 rpm Spindle drive power: approx. 18.5 kW Weight: approx. 7,500 – 8,800 kg Dimensions: ~3.5 × 3.5 × 3 m (L×W×H)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Lrjdpfxszf H Ezs Al Isn Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: good (used), Year of construction: 1999, - Control system: Heidenhain CNC Pilot 3190/4290 - Turn-Plus software update - Turning diameter: 500 mm - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm - 12-station turret, no driven tools - Tool holder VDI 30 - Tailstock - Chip conveyor Lrsdpfx Alezggahs Isn