Used machining centers (vertical) X-axis travel 400-599mm for sale (235)

Condition: excellent (used), Year of construction: 2012, Equipment: chip conveyor, documentation/manual, Chiron FZ12 S, five-axis machining center Machine in very good condition Sinumerik 840DSL control system Gkodpfx Ace Ai Np Ssmsd HSK 50 tool interface Spindle cooling unit

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 35,000 m/min, feed rate Y-axis: 35,000 m/min, feed rate Z-axis: 35,000 m/min, controller manufacturer: HeidenHain iTNC530, workpiece weight (max.): 200 kg, total height: 2,800 mm, total length: 3,500 mm, total width: 3,500 mm, table width: 400 mm, table length: 500 mm, table load: 200 kg, rotary table diameter: 280 mm, overall weight: 6,600 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, 5-axis CNC machine (VMC) HERMLE - C600U MACH-ID 9905 Make: HERMLE Type: C600U Control: HeidenHain iTNC530 YOP: 2006 X - Travel: 600mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 110° B - Axis: 360° Table Length: 500mm Table Width: 400mm Table load: 200 Table Ø: 280mm Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 35000mm/min. Feed rate Z-Axis: 35000mm/min. Feed rate A-Axis: 10Degrees/min Feed rate B-Axis: 15Degrees/min Spindle Taper: 63ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20? Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3500mm Width: 3500mm Height: 2800mm Godpfs Akbtnsx Acmokd Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2002, machine/vehicle number: AV4C0039, functionality: fully functional, operating hours: 50,000 h, input voltage: 400 V, travel distance X-axis: 570 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 570 mm, number of slots in tool magazine: 32, overall weight: 7,600 kg, coolant supply: 15 bar, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, nominal power (apparent): 40 kVA, number of spindles: 1, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 32 m/min, rotary table diameter: 712 mm, spindle nose: DIN ISO40, spindle speed (max.): 8,000 rpm, table load: 300 kg, operating hours of spindle: 50,000 h, Equipment: documentation/manual, rotational speed infinitely variable, General Information • Manufacturer: DAEWOO • Model: ACE VC400 • Year of Manufacture: 2002 • CNC Control: FANUC 18M • Machine Type: Vertical CNC Machining Center with Twin Pallet System • Condition: Good working condition Technical Specifications Travels Gkjdpjvt Sgqjfx Acmsd • X-Axis Travel: 560 mm • Y-Axis Travel: 400 mm • Z-Axis Travel: 510 mm Pallet System • Twin Pallet Changer (2 Pallets) • Pallet Size: 650 × 450 mm • Maximum Pallet Load: 300 kg Spindle • Spindle Taper: BT40 • Maximum Spindle Speed: 8,000 rpm • Main Drive Power: 11 kW Tool Changer • Automatic Tool Changer (ATC) • Tool Capacity: 30 Positions Equipment Included • FANUC 18M CNC Control • Twin Pallet Changer • Hydraulic Clamping System • Röhm Hydraulic Vises • Automatic Tool Changer • Coolant System • Central Lubrication System • Chip Conveyor • Electronic Handwheel (MPG) • Fully Enclosed Working Area Machine Condition The machine is in good working condition and has been used continuously in single-shift production. It is fully operational and can be inspected and tested under power. The machine is currently in production and demonstrates reliable performance in daily machining operations. Regular maintenance has been carried out throughout its service life. Advantages • Proven and reliable FANUC control system • Twin pallet system for increased productivity • Hydraulic clamping system with Röhm vises included • Suitable for milling, drilling and tapping operations • Ideal for steel, aluminum and cast iron machining • Immediate demonstration possible under power Availability The machine is available for inspection by appointment. Live machining demonstration and operational testing under power can be arranged for serious buyers. Additional photos, videos and technical information are available upon request.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 508 x 406 x 394mm, Table 660 x 381mm, Gedpfxj Agn I Dj Acmjkd Spindle taper BT30, 11.2kW Spindle Motor giving 15,000rpm, HAAS Control, 20 Station ATC, Coolant.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, controller manufacturer: Mazatrol, controller model: SmoothX, workpiece height (max.): 320 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 3,650 mm, total width: 2,984 mm, overall weight: 6,800 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, coolant supply: 70 bar, spindle motor power: 15 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained CNC 5-axis vertical machining centre. It is a Mazak CV5-500 from fitted with the Mazatrol Smooth X control system. The machine is in a like new condition with 1114 spindlehours. Technical specifications: Table dimensions: Ø 500 mm Number of pallets: 1 Max. workpiece dimensions: 500 x 320 mm Max. workpiece weight: 200 kg X-axis travel: 730 mm Y-axis travel: 450 mm Z-axis travel: 470 mm C-axis (work table rotation): 360° Gkodjz Ndxkepfx Acmjd B-axis travel: ±110 (220) ° Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Spindle motor: 15/11 kW Number of positions in tool magazine: 48 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 112112, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, controller manufacturer: Brother, controller model: Brother CNC-400, total height: 2,180 mm, total length: 1,560 mm, total width: 1,980 mm, table width: 300 mm, table length: 600 mm, table load: 150 kg, rotational speed (min.): 6 rpm, rotational speed (max.): 6,000 rpm, overall weight: 2,000 kg, spindle speed (min.): 6 rpm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 450 mm, spindle motor power: 4,100 W, number of spindles: 1, number of slots in tool magazine: 10, input voltage: 380 V, type of input current: AC, Equipment: documentation/manual, For sale is a Brother TC-225 machining center, manufactured in 1988. The machine comes from an ongoing production line and was last used recently. It is being sold due to a change in the company’s operations. Gkjdjz R Npaepfx Acmod

Condition: used, Year of construction: 2004, Matsuura MAM72-3VS 5 Axis Multi pallet Machining Centre (2004), Traverses X Y Z: 680 x 394 x 625mm, B axis -110/+ 65 degrees, C Axis 0.001 degrees, Pallet Diameter 130mm, Maximum Workpiece Diameter 300mm, Maximum Workpiece Height 300mm, Number of Pallets 40, Spindle Taper BT40, 240 Station ATC, Spindle Speed 12000rpm, Fanuc G-Tech 16I Control, Through Spindle Coolant and Swarf Conveyor. S/No. 15738. Country of Origin: Japan Gksdpfx Acj Ah Hcwjmed Location: This lot is located in Leicester, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2018, 2018 Fanuc Robodrill D21MIB5 Twin Robot Machining Cell with (2) Fanuc Series 31I-Model B5 CNC Controls Gkedpfx Ajz E Sbrjcmsd Cell Comprising: Twin Fanuc Robodrill Type A04B-0104-B181 Vertical Milling & Drilling Machining Centres (S/Nos. P186ZG729 & P186ZG731). Table Size Approx 650mm x 400mm. Travel: 'X' Approx 500mm, 'Y' Approx 400mm, 'Z' Approx 330mm. Max Table Load 300kg. Number of Tool Pockets 21. Max Tool Length 250mm, Max Tool Weight 3kg. BT30 Spindle Taper. Max Spindle Speeds 10,000 RPM. Nikken TAT-170N (2018) Pneumatically Operated Rotary Support Table with 4th Axis Fanuc DDRiB-104-B181STD. ABB Flexloader SC3000XL Extended Conveyor Loading System (S/No. M180057-1) with Fanuc ABB 6 Axis Robot IRB 4600 & Fanuc ABB 6 Axis Feeder Robot IRB 1200 with Schunk Grab. Feed In/Feed Out Belt Conveyors. ABB Flexloader Vision. FSE E7326 Filtration, 950 Litre Capacity Coolant & Swarf Management System. Andreas Maier AMF 6906/61919 Hydraulic Equipment. This Cell Includes: Euro 250 Bowl Feeder on Stand with CVIC Digital Control. Desoutter ECS16-M20 Current Controlled Screwdriver. Robot Pendant ABB DSQC 679. Signal Tower Lights. Transformers. Weight of each Machining Centre Approx 2,400kg. Floor Space Required for Full Cell Approx 8,000mm x 6,500mm. 3 Phase Power Supply, 415 Volt. Fixtures Not Included. Swarf Bins Not Included. Viewing Recommended.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1018, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, controller model: Fanuc oi-MB, spindle speed (max.): 8,000 rpm, operating hours of spindle: 12,550 h, number of spindles: 1, Equipment: documentation/manual, For sale: used AFM R-550 Harnaś milling machine. Vertical machining center. Year of manufacture: 2004. Serial number: 1018. X/Y/Z travel: 550 x 410 x 510 mm. Table size: 1120 x 360 mm. Spindle speed: up to 8,000 rpm. BT40 taper. Fanuc control system. Gksdpfxe Aa N H Ij Acmsd Spindle overhauled in October 2024. First owner. Please contact me for further details.

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 7,500 rpm, CNC milling machine, type Fadal VMC15, model 914, for sale. The milling machine is in perfect working order and is currently still in use. A functional video is available upon request. Includes a PC for the CNC programs. - Travel in X: 500 mm - Travel in Y: 400 mm - Travel in Z: 500 mm - Spindle speed up to 7,500 rpm Gkodpfxe Ahi Uho Acmod - SK-40 tool holder - Table area 750x400 mm - 10-position tool changer Loading will be done with a forklift. Please feel free to contact us if you have any questions.

Condition: good (used), functionality: fully functional, 1 x Machining center Chiron FZ 18 S Magnum Highspeed Year of manufacture: 1997 Control system: Fanuc GE Series 21 M with 4 + 5 axes (not simultaneous) + Chip conveyor by Knoll. Gjdpfx As Acmfmocmjkd The machine can be inspected on-site while in operation, or a video can be sent. Further details will follow.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10727 Manufacturer: DECKEL MAHO Type: DMU 50t Year of construction: 2002 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany serial number: 110 X-Travel: 500 mm Y-Travel: 400 mm Z-Travel: 400 mm B-Axis: 105 (-10 bis +95) ° C-Axis: 360 ° Table Load: 200 kg Tool Taper: SK40 Numbers Of Tools In Magazin: 16 Rapid Traverse: 12 m / min Total Power Requirement: 17 kW Max feed rate: 10.000 mm / min Machine length: 4000 mm Gkedpo Aka Huefx Acmjd Machine width: 4000 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 3,2 t Further information: The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: used, Year of construction: 2004, operating hours: 11,041 h, functionality: fully functional, machine/vehicle number: 132-37, nominal power (apparent): 28 kVA, controller manufacturer: Siemens, controller model: Sinumerik 840 D, overall weight: 9,600 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer this used Chiron FZ 15K W vertical machining center, manufactured in 2004. It is equipped with a rotary table, and each of the two tables features a high-quality NC swivel table with a clamping bridge/zero-point clamping system from the manufacturer Spreizer. It was primarily used to manufacture smaller stainless steel parts. -Zero-point clamping system -Clamping/releasing pneumatically/hydraulically via push-button -Reneshaw TS 27 R for length measurement and breakage monitoring Sinumerik 840 D control system -Chip conveyor -The machine was operated exclusively with coolant and cutting oil. -The machine is equipped with a fire extinguishing system from Kraft und Bauer, which was regularly serviced by Kraft und Bauer. -The machine has age-related and usage-related wear and tear. It was primarily operated in a single-shift operation. It was regularly serviced and maintained by Chiron. We assess the optical condition as very good. The machine is immediately ready for full operation. Hour counter: 11041 hours Year of manufacture: 2004 Weight: 9600 kg Power supply: 3/N/PE Frequency: 50/60 Hz Operating voltage: 400 V Control voltage: 24 V Power: 28 kVA Rated current: 45 A Fuse: 50 A slow-blow/quick-blow If you have any questions or need more information, please send us a message or call us. Gksdpfsz Dbtzsx Acmsd

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Control: BROTHER (similar to Fanuc) Table dimensions: 600 x 300 mm Max. table load: 150 kg X-travel: 480 mm Y-travel: 360 mm Z-travel: 410 mm Spindle speed: 0 - 10000 rpm Taper: MAS-BT30 X/Y rapid traverses: 36000 mm/min Z rapid traverse: 50000 mm/min ATC magazine: 14 stations Tool change time: 1.1 sec Chip-to-chip time: 1.8 sec Drive power: 8.4 / 4.9 kW Power requirements: 400V, 3 phases, 50/60 Hz, 25A, 20 kVA Weight: 2900 kgs Dimensions (LxWxH): 2000 x 2700 x 2500 mm Accessories / Equipment: • Coolant system • Pallet changer (0 - 180 degrees) • Machine light • Documentation The machine has been regularly maintained and is in good used condition. Gedpfx Ace Ai Eyfomekd

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 7,990 kg, CHIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a comprehensive factory overhaul by CHIRON For sale is a CHIRON FZ 18 S MAGNUM High Speed vertical CNC machining center manufactured in 1998. The machine is equipped with Siemens SINUMERIK control, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also has an oil mist extraction system with a filter. The most important advantage of the offered machine is the comprehensive inspection and overhaul carried out in 2020 by CHIRON. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available for the work performed, confirming the scope of the overhaul. Technical data: Gjdjzdkhqspfx Acmskd Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the comprehensive overhaul carried out by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018 Röders RXP 400 CNC, Applications Ideal for high-precision machining applications, including: Gkedoz Tqwcopfx Acmjd Micro-machining Electrode manufacturing Small mould manufacturing Precision components High-speed milling applications Documentation The Röders calibration protocol is available to document the calibration work carried out by the manufacturer's engineer.

Condition: used, Year of construction: 2001, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, nominal power (apparent): 47 kVA, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,700 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used Chiron FZ 15K S machine, manufactured in 2001. CNC control: Fanuc Series 18i 2-axis rotary table (A and C axes) 48-position tool changer Chip conveyor Gjdjzyyqyspfx Acmekd Coolant unit X-axis travel / X-axis stroke: 550 mm Y-axis travel / Y-axis stroke: 400 mm Z-axis travel / Z-axis stroke: 360 mm C-axis / C-axis: 360° A-axis / A-axis: +-100° Spindle taper: HSK A63 Weight: approximately 8700 kg Spindle speed: 20-12000 rpm If you have any questions or require further information, please send a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,179 h, travel distance X-axis: 550 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 355 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 500 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, number of axes: 3, This 3-axis Exeron HSC 300/3 was manufactured in 2017. It features impressive travels of 550 x 340 x 355 mm and a clamping table size of 470 x 400 mm with a maximum load of 500 kg. The machine is equipped with a high-frequency spindle capable of speeds up to 42,000 rpm and a tool magazine with 40 positions. If you are looking to get high-quality machining capabilities, consider the Exeron HSC 300/3 vertical machining centre we have for sale. Contact us for further details. • Clamping table: 470 x 400 mm • Spindle speed: up to 42,000 rpm (StepTec high-frequency spindle) • Taper / tool interface: HSK 40-E • Usage: exclusively for machining graphite electrodes • Spindle time: 1,180 h Additional equipment • Workpiece probe: Heidenhain TS 460 + calibration mandrel • Tool measurement: integrated laser system MICRO COMPACT NT • Extraction system: Keller L-CUT-1-PM3-BE58 (graphite dust extraction) • Chip conveyor: No (machine equipped with graphite dust extraction instead) Gjdpfxj Ad Hbkj Acmokd

Condition: new, Year of construction: 2023, operating hours: 24 h, functionality: fully functional, KOMATECH KT360D – Dual Table HIGH SPEED DUAL TABLE TAPPING CENTER – NEW IN OUR SHOWROOM (YEAR 2023) (0 HOURS SPINDLE RUNNING ) CNC control: FANUC 0i-MF PLUS Gkedpfxo Aardco Acmjd Manual guide i Electronic handwheel for 3 axis X-axis travel: 520 mm Y-axis travel: 360 mm Z-axis travel: 360 mm Rapid feeds X, Y, Z: 50/50/60 m/min Axis acceleration: 2,4 G Table size /each side: 650x350 mm (2X) Distance table /spindle nose: 200-500 mm Admissible load on table: 200 Kg x2 Pneumatic jig interface on table Spindle speed: 15.000 rpm / direct drive Motor power (S1/S6): 5,5/18 Kw Torque motor (S1/S6): 17,5 Nm/57,3 Nm Spindle oil cooler by independent circuit Spindle cone: BT30 Turret magazine capacity: 21 tools Change tool time: 1,08 sec Max. tool length: 200 mm Cooling pump for external tool cooling Coolant Through Spindle 20 bar Washing down system in working area Chips conveyor scrapper type Metallic full top cover Transformer CE devices and certificate Net weight: 4.300 Kg

Condition: used, Year of construction: 2004, functionality: fully functional, Travel ranges X / Y / Z 560 / 410 / 410 mm Table clamping surface 650 × 410 mm Maximum table load 250 kg Spindle taper SK 40 Control system SIEMENS SINUMERIK Maximum spindle speed 12,000 rpm Tool magazine 24 positions Maximum tool diameter 77 mm · 125 mm with free adjacent positions Maximum tool length / tool weight 200 mm / 5 kg Gedpfx Ae Aiifajcmjkd Rapid traverse X / Y / Z 48 m/min Machine weight approx. 5,000 kg Machine dimensions L × W × H 1.7 × 2.3 × 2.5 m Connected power 20 kVA

Condition: good (used), Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 570 mm, number of axes: 3, number of slots in tool magazine: 24, total height: 281 mm, overall weight: 3,900 kg, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, spindle speed (max.): 10,000 rpm, Famup MC60E, year of manufacture 2000, spindle new. In good used condition. The spindle was replaced in 2021! Unfortunately, the tool changer has a problem, but it is likely just a matter of adjustment. The machine is no longer needed, so no further work will be done on the tool changer. Control system: Siemens 840D, including ShopMill X-axis: 600 mm Godpfx As Ai Sb Uscmekd Y-axis: 400 mm Z-axis: 570 mm Tool holder: SK40 Spindle power: 7.5 kW Spindle speed: 10,000 rpm Tool changer: 24 tools External coolant supply Swiveling coolant nozzle, chip conveyor Dimensions and weight: - (L x W x H): 3500 x 2300 x 2700 [mm] - Weight: 3900 [kg] Can be inspected while powered on.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 500 mm, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 eVolution was manufactured in 2001. It features a Heidenhain MillPlus control unit and a tool magazine capacity of 32 tools, utilizing an SK 40 taper. The machine is equipped with an internal coolant supply system for efficient cooling. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50 eVolution vertical machining centre we have for sale. Contact us for further details. - Control System: Heidenhain (control panel per photo)- Tool Magazine: 32 pockets, SK 40 taper- Equipment / Accessories: Internal Coolant Supply (IKZ), tool breakage monitoring, measuring probe, coolant system with pumps- Automation: Indunorm / Indumatik ultralight loading system (pallet / vise storage)- Power Connection: 400 V / 50 Hz- Power Rating: 50 kVA- Max Current: 71 A- Fuse Protection: 80 A- Operating Hours: 81,460 h (Counter 6P1 - Machine On / Control On) and 44,096 h (Counter 19P1 - Spindle / Working Hours) Gkedj Ai E Tnopfx Acmsd

Condition: not inspected (used), Year of construction: 1995, travel distance X-axis: 650 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller manufacturer: Mitsubishi, controller model: Meldas 50 M, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle nose: SK 40, Vertical Machining Center Manufacturer: LEADWELL Model: VMC 25 Year of manufacture: 1995 Control: Mitsubishi Meldas 50 M Technical specifications: - X-axis travel: 650 mm - Y-axis travel: 410 mm - Z-axis travel: 410 mm - Max. spindle speed: 6,000 rpm - Tool holder: SK 40 - Machine weight: approx. 4,200 kg - Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Condition: used, untested Gkjdpjzz S R Usfx Acmsd In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Haas TM1 4 K SPINDLE TRAVELS X 762 MM Y 305 MM Z 406MM This machine has the option to run on 240v single phase 2003 machine in good condition Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM1 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required. Gedpfjyfn Ilox Acmekd The machine is 2.7m high with the head up and 2.2 with it down.

Condition: used, Year of construction: 2006, functionality: fully functional, MATSUURA MAM72-35V 5 AXIS 32 PALLET MACHINING CENTER G-TECH 16i CONTROL Gkedpsx U D Twsfx Acmod 2006 MACHINE Supplied with 20 BT 40 tools and 5 pallets 15 k Spindle . £65k plus vat.