Used Vertical Machining Centre for sale (65,177)

Condition: ready for operation (used), Year of construction: 2011, Feeler QMP-23A 5 Axis Vertical Machining Centre Model: QMP-23A Fanuc Series Oi-MD Control Remote Electronic Handwheels 5 Axis Trunnion Table Travels: X: 580mm (48m/min) Y: 420mm (48m/min) Z: 510mm (48m/min) Spindle Nose to Table Surface: 80 – 590mm Spindle Centre to Column Surface: 510mm Table Surface to Floor 820mm Table Centre to Column Surface: 245 – 665mm GANRO TR-150S (TRS Range) Y Axis Tilting Rotary Table 150mm Capacity YOM: 2015 *For sale with Jet Machinery Ltd* Stock No: 79001 Serial No: VKC064 Price: £24,950.00 + VAT Kfsdpfxoxxbzws Aa Eja Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 5260 kg Main Drive Spindle Speed 32000 RPM Spindle motor power 8000 kW Movement X-Axis Movement 760 mm Kodpfx Ajx Hbmlsa Esfa Z-Axis Movement 510 mm Y-Axis Movement 500 mm This 3-axis VICTORY VC F76 vertical machining center was manufactured in 2021. It features Fanuc Series Oi-MF Plus control, with axis traverses of X-760, Y-500, Z-510, and rapids at 32m/min. The table size is 840x500, supporting a 500 kg workload, and it includes a 24-tool magazine. Machine weight is 5260 kg. If you are looking to get high-quality milling capabilities, consider the VICTORY VC F76 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2003, condition: good (used), Traverses X Y Z: 810 x 610 x 500mm, Table 350mm diameter, C axis (rotary) 360o, A axis (Tilt) +30o/-120o, Spindle speed 12000 rpm, Spindle taper BT40, Spindle Motor 13kW, Rapid feedrates 43m/minute, Heidenhain TNC530, 30 Station side arm ATC, Kfodpfxsk Shihj Aa Eja Coolant, Low Volt light

Condition: used, Year of construction: 2004, Leadwell Vertical Machining Centre Model V-30. S/No. L2TJD0216 (2004) with Fanuc Series Oi-MB Control, 24 Station ATC, Table Size 890mm x 400mm, X Travel 760mm, Y Travel 410mm, Z Travel 410mm, BT 40 Tooling Kfodpfx Aex Ahxkoa Esa Location: This lot is located in Birmingham, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, workpiece weight (max.): 1,588 kg, total height: 3,023 mm, total length: 4,089 mm, total width: 3,353 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 8,100 rpm, overall weight: 6,033 kg, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Ksdpsx E S Iqjfx Aa Eefa Table size 1.321 x 457 mm Table load 1.588 kg Number of pallets: 1 x Movement X-axis 1.270 mm Movement Y-axis 508 mm Movement Z-axis 635 mm Spindle taper MAS BT40 Spindle speed 40 - 8.100 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,083 h, General Data Machine weight 9500kg Control Unit Brand FANUC Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 570 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information. Ksdpfsx D Dzqox Aa Eofa Application Types Milling

Condition: used, Year of construction: 2004, Hurco VMX24S Vertical Machining Centre with Hurco Ultimax Control, table size 760mm x 510mm, 24 ATC, BT 40 Tooling, 8000rpm, travel X=610mm Y= 508mm Z= 610mm, Coolant Tank. S/No. H-2S061 (2004) Location: This lot is located in Burton-on-Trent, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Kjdpfx Asx Ahlqoa Eofa

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 mm Kjdpfox D Dzwjx Aa Esfa Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Ksdpfx Aex D Dz Doa Esfa Milling

Condition: ready for operation (used), Year of construction: 2023, This 5-axis DMG MORI DMP-70 was manufactured in 2023, featuring a Siemens 840D sl control and a BBT30 direct-drive spindle with a maximum speed of 24,000 rpm. It includes a 25-tool ATC and coolant through spindle at 40 bar. Ideal for high-speed, 5-axis machining with its integrated swivel rotary table. If you are looking to get high quality machining capabilities consider the DMG MORI DMP-70 machine we have for sale. Contact us for more information about this machine. Application Types Kfedpfx Ajx D H Hiea Eoa Milling

Condition: ready for operation (used), Year of construction: 2012, operating hours: 37,513 h, General Data Machine weight 9500 kg Kjdpfx Aex D Dz Rsa Esfa Main Drive Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm Tools Number of index 40 This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 2440 mm Measurements depth 2180 mm Measurements height 2900 mm Machine weight 5540 kg Control Unit Brand HURCO Model MAX5 Main Drive Spindle speed range 12000 RPM Number of axis 5 Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 35 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 35 m/min Z-Axis Movement 520 mm Z-Axis Rapid Traverse 30 m/min A-Axis Movement +30°/-110°, +/- 7 sec A-Axis Rapid Traverse 25 RPM C-Axis Movement 360°, +/- 7 sec C-Axis Rapid Traverse 25 RPM Workpiece Workpiece weight 140 kg Table Number of tslots 6 Table load 200 kg Tools Number of index 40 Max weight 7 kg Max tool length 300 mm Media Main electronic connection 31 kVA / 45 A / 400V Kfodpfox D Ekyex Aa Esa Additional Equipment Central lubrication system: 1 pump (X,Y,Z) Taper DIN69871 SK-40 Material of machine bed: Cast-iron This 5-axis Hurco VMX30Ui + BMO Automation Titanium 50 was manufactured in 2017. Ideal for complex, multi-angle machining with its advanced vertical machining centre design. If you are looking to get high-quality milling capabilities, consider the Hurco VMX30Ui machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand MAZATROL Model 640M General Data Measurements width 3485 mm Measurements depth 4424 mm Measurements height 3442 mm Machine weight 11500 kg Ksdpfx Aaex D Ifys Eefa Main Drive Spindle speed range 40 - 12000 Number of axis 3 Movement X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 660 mm Table Outer length 2000 mm Outer width 760 mm Table load 1400 kg This 3-axis Mazak VTC-300C vertical machining center was manufactured in 2005. It features a spindle speed range of 40 - 12,000 RPM and a robust table capable of handling loads up to 1400 KG. With dimensions allowing for significant movement (X: 1740 mm, Y: 760 mm, Z: 660 mm) and equipped with a 30-piece ATC, this machine is ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-300C machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1994, Control Unit Brand FANUC Model Series 16-M Kfjdpfx Aaex D Nq Rs Eea Movement X-Axis Movement 400 Y-Axis Movement 300 Z-Axis Movement 300 This 3-axis FANUC Robodrill Alpha-T10A was manufactured in 1994. It features a FANUC Series 16-M CNC, a table size of 650x400 mm, and can handle a maximum part weight of 200 kg. It has 10 tool pockets, enhancing its versatility for various machining tasks. Consider the opportunity to buy this FANUC Robodrill Alpha-T10A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 18000 rpm Tool taper SK 40 Additional Equipment Tool Magazine: Additional magazine ZM157 Tool Breakage/Measurement: BLUM tool breakage/measurement Measuring Probe: Heidenhain Event Messenger: Available Electrical Heat Compensation: Provided External Blowing Air: Provided / Oil Mist Extraction: Provided / Chip Trolley: 450 liters Rotating Transparent Window: Available Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex This 5-axis HERMLE C30U + RS Automation was manufactured in 2006, offering advanced capabilities for precision machining. Ideal for complex geometries, this vertical machining centre represents a significant asset for enhancing your production efficiency. Consider the opportunity to buy this HERMLE C30U vertical machining centre. Contact us for more information. Application Types Milling Kfjdpfsx D Ew Hsx Aa Eoa

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 2530 mm Measurements depth 2100 mm Control Unit Brand MITSUBISHI Model M70 Main Drive Spindle speed range 15000 RPM Number of axis 3 Media Main electronic connection 15kVA Additional Equipment Spindle cooler (oil/air) External cooling External compressed air cooling External minimum lubrication Pendant Air gun Cooling water gun Kfedpjx D Inhefx Aa Eea Oil skimmer This 3-axis Akira Seiki PC700HSC was manufactured in 2017. It features a working range of 700mm x 400mm x 330mm, a BT30 spindle taper, and a maximum speed of 15,000 RPM. The machine includes a 21 ATC changer, Mitsubishi M70 control, and rapid traverse of 40m/min. Consider the opportunity to buy this Akira Seiki PC700HSC vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 3200 mm Measurements height 2700 mm Measurements depth 2500 mm Movement X-Axis Movement 700 mm Z-Axis Movement 450 mm Y-Axis Movement 550 mm Additional Equipment Oil Mist Extraction / Milling Spindle HSK 40 Fischer / Laser System / Infrared Measuring Probe / SW 3D Form Inspect / Handling System 84 × ITS 50 / 16 × ITS 148 / WINSTAT Connect Main Drive Number of axis 3 Spindle Speed 42000 RPM Spindle motor power 17 kW Tool taper HSK 40 Kodpfjx D H Ugox Aa Ejfa Table Table load 2000 kg Tools Slots in storage 72 This 5-axis OPS INGERSOLL 650 was manufactured in 2004, featuring a robust vertical machining center design. It boasts a travel distance of X: 700 mm, Y: 550 mm, Z: 450 mm, and a high spindle speed up to 42,000 rpm. The machine includes a 72-tool changer and supports a load capacity of 2000 kg. If you are looking to get high-quality milling capabilities consider the OPS INGERSOLL 650 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, General Data Machine weight 3500 kg Movement X-Axis Movement 8000 mm Y-Axis Movement 500 mm Z-Axis Movement 220 mm This 3-axis Tekna TK 427/8 CNC milling machine was manufactured in 2000. It features a substantial travel range with 8000 mm on the X-axis, 500 mm on the Y-axis, and 220 mm on the Z-axis, weighing 3500KG. If you are looking to get high-quality milling capabilities, consider the Tekna TK 427/8 machine we have for sale. Contact us for more information about this machine. Application Types Milling Ksdpex D E S Rofx Aa Eofa

Condition: ready for operation (used), Year of construction: 2003, Movement X-Axis Movement 800 mm Y-Axis Movement 550 mm Z-Axis Movement 550 mm This 3-axis Matsuura V.PLUS-800 was manufactured in 2003. It features a spacious table of 1150mm x 550mm with a loading capacity of 500kg, and a robust spindle speed ranging from 40 to 12,000 RPM. Ideal for precise and heavy-duty machining. If you are looking to get high-quality milling capabilities, consider the Matsuura V.PLUS-800 machine we have for sale. Contact us for more information. Application Types Kfsdpfx Aajx D I D Ne Eoa Milling

Condition: ready for operation (used), Year of construction: 2004, Main Drive Spindle speed range 18000 Number of axis 4 Movement X-Axis Movement 3425 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Tools Type of tool holder ISO30 This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2004. It features a powerful 5.5 kW electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The tool magazine is centrally located, protected, and supports various tools. It has a standard workpiece length up to 4000 mm and an extended range up to 8000 mm. Contact us for more information about this machine. Application Types Kfodpfxex D I Hkj Aa Eja Milling

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle speed range 18000 Tool taper ISO30 Number of axis 3 Movement X-Axis Movement 3425 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm This 4-axis MECAL MC 305 vertical machining center was manufactured in 2008. It features a high-power electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The machine offers a large working range up to 8000 mm and includes a centralized minimal cooling system. If you are looking to get high-quality milling capabilities, consider the MECAL MC 305 machine we have for sale. Contact us for more information. Application Types Milling Kfodjx D Izhopfx Aa Eoa

Condition: ready for operation (used), Year of construction: 1998, Movement X-Axis Movement 1500 Y-Axis Movement 800 Z-Axis Movement 650 This 3-axis Hartford HV-70S was manufactured in 1998. It features a maximum speed of 3500 rpm and a tool magazine with 20 slots, ISO 50 type. The working range includes X=1500, Y=800, Z=650 mm, and table dimensions of 1750x750 mm. Various tool holders are included. Contact us for more information. Application Types Kjdpfx Aajx D Rlcs Eofa Milling

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand HEIDENHAIN Model 530 Main Drive Spindle speed range 6000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 2000 Y-Axis Movement 500 Z-Axis Movement 500 Tools Slots in storage 24 Media Chip conveyor Yes Additional Equipment Equipped with cooling milk container Kedpox D Sfwofx Aa Ejfa This 3-axis CHIRON Mill 2000 was manufactured in 2006. It features a working range of X-axis: 2000 mm, Y-axis: 500 mm, Z-axis: 500 mm, a 24-tool magazine, and a BT40 spindle capable of 6000 RPM. Equipped with a Heidenhain 530 control and a chip conveyor. Consider the opportunity to buy this CHIRON Mill 2000 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 3480 mm Measurements depth 3850 mm Measurements height 3170 mm Machine weight 13500 kg Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 12000 Number of axis 3 Movement Kfodpfx Aaex D R I Rs Eoa X-Axis Movement 1630mm Y-Axis Movement 762mm Z-Axis Movement 650mm Tools Type of tool holder BT40 This 3-axis DOOSAN DNM 750 II was manufactured in 2018, featuring a robust vertical machining centre design. It boasts a large X-axis movement of 1630mm, Y-axis of 762mm, and Z-axis of 650mm. Equipped with a high-speed spindle at 12,000 RPM and a BT40 toolholder, it includes an ATC with 30 positions. Consider the opportunity to buy this DOOSAN DNM 750 II vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, Control Unit Brand HAAS Main Drive Number of axis 3 Kjdpfxox Ixh Ns Aa Esfa Spindle Speed 12000 RPM Tool taper BT 40 This 5-axis HAAS UMC-750 was manufactured in 2014. It features a vertical machining center with a 12000 rpm spindle, BT40 tooling, and a 70-tool holder capacity. Additional highlights include coolant through spindle, a probe, toolsetter, and high-speed machining capabilities. Consider the opportunity to buy this HAAS UMC-750 vertical machining center. Contact us for more information about this machine. Application Types Milling