Used machining centers (vertical) X-axis travel 1000-1199mm for sale (339)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Siemens 810D / ShopMill, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,035 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Spindle speed, max.: 10,000 rpm Table width: 560 mm Table length: 1,200 mm Number of tool magazine positions: 20 MACHINE DETAILS Control system model: Siemens 810D / ShopMill Ibolozqfv Aohccqqja Control cabinet cooling: Rittal SK 33023.100 Spindle operating hours: 11,000 h Total operating hours: 33,600 h EQUIPMENT Internal coolant supply (ICS) Chip conveyor

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 1539000208A, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Heidenhain TNC 620, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,035 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Rapid traverse rate: 25 m/min Ioleztb Imohccqqoba Table size: 1,200 × 560 mm Motor spindle speed: 10,000 rpm AC main drive power: 13/9 kW at 40/100 % duty cycle Tool positions: 20 Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain TNC 620 Connected load: 17 kVA Rated current: max. 28 A Fuse rating: 35 A Mains voltage: 400 V Mains frequency: 50 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,100 kg EQUIPMENT Electronic handwheel Chip conveyor with extended coolant tank Coolant/air blast switching Coolant spray gun Heidenhain TS 649 measuring probe

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, spindle power 18.5 kW, Ibjlozqtb Hehccqqea Fanuc control, Through Spindle Coolant, swarf conveyor

Condition: used, Year of construction: 2010, Mazak VCN 510C-II (Vertical Center Nexus) With Mazatrol Matrix Nexus control, 12,000 RPM 18.5KW BT40 spindle, with tool setter and swarf conveyor. Due into Bristol in March 2026 when more pictures will be uploaded. Specification: Isleyh N Aashccqqsba Control System: Mazatrol Matrix Nexus Table Size: 1300 mm x 550 mm Maximum Table Load:1200 kg X-Axis Travel: 1050 mm Y-Axis Travel: 510 mm Z-Axis Travel: 510 mm Spindle Speed: 12000 RPM Spindle Taper: BT40 Spindle Motor: 18.5 kW Tool Storage Capacity: 30 tools (Standard) Tool Change Time (Chip-to-Chip): Rapid Traverse (X/Y/Z): 36 m/min Weight: ~ \(6900\) - \(7100\) kg Machine Dimensions 3870 x 2819 x 2842mm Control System: Mazatrol Matrix Nexus Specs: X 1050 Y 510 Z 510 / 12,000RPM / BT40 Accessories: Tool setter and swarf conveyor

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 06584, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, controller model: Hurco Ultimax, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Axes: 3 Travel in X-axis: 1,020 mm Travel in Y-axis: 510 mm Travel in Z-axis: 610 mm Spindle speed (max.): 8,000 rpm Motor power: 15 kW Table length: 1,220 mm Table width: 510 mm MACHINE DETAILS Control system: Hurco Ultimax Ibslhcozuw A Nocqqja Drive system: CNC Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,350 x 2,400 mm Weight: 5,000 kg Shipping packages: 1 EQUIPMENT Documentation CE marking

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: PV10150642, MACHINE SPECIFICATION Table size 1200 x 480mm X axis traverse 1050mm Y axis traverse 540mm Z axis traverse 560mm Spindle nose to table 80 – 640mm Spindle BT 40 Spindle speeds 20 – 10,000rpm Spindle motor 15kW Rapid feed rate X/Y/Z 32/32/24m/min Toolchanger capacity 24 Tools Approximate weight 6600Kg MACHINE EQUIPPED WITH: - Siemens 828D CNC control Swarf auger Coolant system Lighting Guarding Iolszguf Sjhccqqsba

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 9725, SPECIFICATION Ibeloy Uuuxehccqqoa Table size 1070 x 230mm Longitudinal traverse 660mm Cross traverse 250mm Vertical traverse 380mm Quill travel 125mm Quill feeds 0.038 – 0.152mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50 – 3500rpm Approx. weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Newall Topaz 2 axis DRO system Low voltage halogen worklight Guarding Coolant system

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Ibelhccqot Dmlfjqoa Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Ielhccjtylazjqqjba Approximate Weight 2000Kg   Machine equipped with:- Siemens 810D Shopmill CNC Control Swarf auger Lighting Coolant system Enclosed guarding

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: i Series, total height: 2,950 mm, total length: 2,450 mm, total width: 3,150 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,104 h, coolant supply: 20 bar, spindle motor power: 15,000 W, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine features a large working area and a robust construction, making it suitable for both single-piece and series production work. In addition, this machine is equipped with various interesting options, as listed below, and comes with a comprehensive set of tools. The machine is currently installed and operational at our facility and can be inspected by appointment. Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - Renishaw OMP 3D probe - 2 machine vices - Chip conveyor - Spindle cooler Ijleztvmwohccqqjba - Preparation for a 4th axis - Approximately 30 SK40 tool holders - All original documentation

Condition: used, Year of construction: 2000, x-travel 1000 mm y-travel 1040 mm z-travel 750 mm control Heidenhain TNC 426 turning speeds 15000 U/min total power requirement 40 kW weight of the machine ca. 10,1 t required space / m Iolhccqstig D Ioqeba

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DMG Deckel Maho DMC 1035 V Vertical Machining Center. The machine is in very good optical and technical condition. Inspection while powered on is possible at any time. Technical data: Year of manufacture: 2008 Ielhccezun Snoqqjba Control system: Heidenhain iTNC530 Travel distances: X: 1,035 mm Y: 560 mm Z: 510 mm Clamping area: 1,200 mm x 560 mm Spindle speed: 10,000 rpm Tool changer: 20-position Tool holder: SK40 Coolant/air blast switchover Electronic handwheel Operating mode 4 Coolant tank free on truck ex works Hagen

Condition: ready for operation (used), Year of construction: 2000, operating hours: 32,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, overall weight: 4,900 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2000. It features a travel range of 1000 mm in the X-axis, 600 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a vertical tool changer with 24 stations and a maximum permissible load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 103 V vertical machining centre we have for sale. Contact us for further details. - Rapid Traverse (X/Y/Z): 30 m/min- Max. Permissible Load: 800 kg- Tool Changer: Vertical tool changer with 24 stations- Machine Weight: approx. 4,900 kg- Main Drive: Speed-controlled asynchronous motor 9/13 kW- Electrical Specifications: 400 V, 3+PE~, 50/60 Hz, 50 A, 30 kVA, Control voltage 230 V / 24 V=- Operating Hours: approx. 32,000 operational hours (cabinet counter reads 054888 h)- Included / Additional Equipment: Chip conveyor, dividing head with counterholder (4th axis, currently disconnected)- Operational Condition: Configured for 4 axes; 4th axis power unit failed/disconnected; operated as 3-axis machine until end of 2021; out of service and available immediately Ibelhccszu Nygoqqea

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,000 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, table load: 700 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis Hartford LG-1000 vertical machining center was manufactured in 2017. It features a 1150x510mm table with a load capacity of 700kg, an ATC with 24 positions, and a spindle speed of 8,000 rpm. The machine includes a FANUC 0iMF controller and linear guide ways. If you are looking to get high-quality milling capabilities, consider the Hartford LG-1000 machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Very good condition, regularly maintained Technical Machine Benefits • Linear guide ways • Table dimensions: 1150 x 510 mm • Atc: 24 positions • High pressure through spindle cooling 20 bar Ielox D I I Iehccqqeba • External and internal air cooling • Renishaw omp40-2 workpiece probe • Renishaw ots tool probe Extra Information Machine still under power Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2004, x-travel 510 mm y-travel 355 mm z-travel 405 mm table surface area 786 x 355 mm control Kitamura spindle turning speed range 150 - 15.000 U/min spindle taper SK 30 table load 240 kg rapid traverse X/Y/Z axis 50/50/36 m/min ATC 20 Pos workpiece diameter at full load 70 mm tool diameter if 2 vacant positions 100 mm tool length - max. 200 mm weight of tools max. 2 kg total power requirement 15 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,4 x 2,1x 2,63 m Iolhccqeym D Aueqoba

Condition: ready for operation (used), Year of construction: 2003, operating hours: 20,000 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VCN 510C was manufactured in 2003. It features a spindle speed of 12,000 rpm with an SK40 taper and a tool magazine with 30 positions. The table size is approximately 1300 × 550 mm, and it includes a cooling system with 15 bar internal pressure. Consider the opportunity to buy this Mazak VCN 510C vertical machining centre. Contact us for more information. • Tool magazine: 30 positions • Control: Fusion Ijlhccqjx Enlrsqsba • Table size: approx. 1300 × 550 mm • Cooling: 15 bar internal (through-spindle) pressure Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg Ibelovt Dwbjhccqqea - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Technical details x-travel 1050 mm y-travel 530 mm z-travel 630 mm Control Heidenhain TNC 620 table surface area 1150 x 560 mm tool taper SK 40 spindle turning speed range 10000 U/min rapid traverse 24 m/min total power requirement 25 kVA weight of the machine ca. 7,8 t dimensions of the machine ca. 4,3 x 2,4 x 2,9 m Additional information Working hours (date 10. July 2026): - Control on: 20811 h - Machine on: 13353 h Ibolhccozrukfeqqea - Programm cycle: 7412 h - Spindle hours : 5184 h Equipment: CNC control Heidenhain TNC 620 Electronic handwheel Heidenhain Tool measuring system Linear scales in all axes X/Y/Z Preparation for measuring probe 30-station tool changer Coolant equipment with paper band filter system Internal coolant supply through the spindle 20 bar Blown air through the spindle Chip conveyor Machine documentation

Condition: ready for operation (used), Type: FEELER QM-40S Fanuc 18i-MB control Renishaw tool setter X-axis travel: 1000 mm Y-axis travel: 520 mm Z-axis travel: 505 mm Table size: 520 × 1150 mm Max. table load: 500 kg Spindle taper: ISO 40 (7/24 taper No.40) Spindle speed: up to 10,000 rpm Main power: 15 / 18.5 kW Tool changer: 24 positions (random ATC) Max. tool weight: 8 kg Max. tool length: 300 mm Max. tool diameter: Ø80 mm (Ø150 mm without adjacent tools) Rapid traverse: X: 48 m/min Y: 48 m/min Z: 30 m/min Cooling: internal cooling (high-pressure spindle cooling) external cooling chip flushing Required air pressure: 6–8 bar Ibslsyi H R Tjhccqqsa Power supply: 20 kVA Spindle oil cooled Machine weight: approx. 6,300 kg Machine dimensions: 2,800 × 2,185 mm Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The displayed price is excluding VAT (VAT deductible for businesses)

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, Ijlhccezh Nczeqqeba 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: like new (used), Year of construction: 2023, Haas TM2-P Year: 2023 X-1016, Y-406, Z-406 RPM: 6,000 BT 40 WIPS HSM Ibjlhccqezua Hwjqsa 4th axis connection Very few operating hours Like new!

Condition: good (used), Year of construction: 1998, Victor VT26 Year of manufacture 1998 Fanuc OT control C-axis Z-axis travel: 1100 mm Chuck diameter: 250 mm Ielhezuaydsccqqjba Equipped with chip conveyor and tooling Video available

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 1016mm x 508mm x 508mm, table size 1168mm x 508mm, 10000rpm spindle, 20 station ATC, BT40 spindle taper, Iolhjzh Hw Neccqqsba input 15kW, Hurco WINMAX 5 control, coolant, swarf auger.

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating hours: 15,950 h, POSmill E 1100 machining center ITNC 530 (2014) Manufacturer: POSmill Type: E 1100 machining center ITNC 530 Year of manufacture: 2014 Condition: used, good under power ready for demonstration, X-spindle NEW Switch-on hours approx. 43,559h Spindle hours approx. 15.789h Control ITNC 530 Travels POsmill E 1100 X-axis 1100 mm Y-axis 600 mm Z-axis 510 mm Rapid traverse up to 32 m/min Ball screw drives up to 50 mm Islhccsztwyroqqoba Feed rate 1 - 10,000 mm/min. Tool holder ISO 40 Speed, max. 10,000 rpm Power, max. 25 kW Spindle/table distance 120-630 mm Table dimensions 1300 x 600 mm Distance floor/table approx. 855 mm Load, max. 1,000 kg Distance spindle/stand approx. 600 mm Number of tools 60 pcs. Tool length, max. 300 mm Tool weight, max. 8 kg Changing time from 5.5 s Weight 8,500 kg - Original documentation - 3D measuring probe - Belt filter system with IKZ 20 bar - Water gun - Air gun - Machine feet - Chip conveyor - HR 410 handwheel - Prepared for 4th & 5th axis Note: Without vices

Condition: good (used), Year of construction: 2008, Working hours: - Power on: 44113 - Spindle hours: 13284 Equipped with: * CNC control SIEMENS 810 D powerline * 20-station ATC * Coolant equipment * Chip conveyor x-travel 1035 mm Ieljzquqishccqqsba y-travel 560 mm z-travel 510 mm table surface area 1200 x 560 mm table load 1000 kg tool taper SK 40 spindle turning speed - stepless 20 - 8000 rpm feeds longditudinal/cross/vertical - 20000 mm/min rapid traverse 25 m/min spindle drive motor 13 kW dimensions of machine 2,6 x 2,6 x 2,7 m weight of the machine approx. 4,1 t