Used Doosan for sale (307)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc, controller model: Oi-MC, workpiece weight (max.): 800 kg, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, table width: 510 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Dodpfx Asv Iq Ezofnjkh Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 670 mm, feed length Z-axis: 625 mm, nominal power (apparent): 37 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 1,000 kg, total height: 2,815 mm, total length: 3,350 mm, total width: 3,760 mm, table width: 650 mm, table length: 1,300 mm, table load: 1,000 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 650 Vertical Machining Centre – 2011 Fanuc i-Series Control | 12,000 RPM | 4th Axis Ready 2011 Doosan DNM 650 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle, rebuilt spindle, 4th axis ready, 30-tool ATC, TSC, chiller & swarf conveyor. Available from Used Machine Tools Ireland. Dodpfxeyfh Ixe Afnokh Manufacturer: Doosan Model: DNM 650 Machine Type: 3 Axis Vertical Machining Centre with 4th Axis preparation Year: 2011 Control: Fanuc i Series Condition: Very Good - spindle rebuilt in 2026 Availability: March 2026 We are pleased to offer this 2011 Doosan DNM 650 Vertical Machining Centre, a highly regarded and extremely rigid VMC, ideal for precision subcontract machining, toolmaking, and production environments. This machine is equipped with a Fanuc i-Series control and benefits from a newly rebuilt spindle, ensuring excellent performance, reliability, and long service life. The machine is prepared for a 4th axis with Nikken interface, making it an ideal platform for future rotary or multi-axis work. Key Specifications Manufacturer: Doosan Model: DNM 650 Year: 2011 Control: Fanuc i-Series Spindle Speed: 12,000 RPM Tool Taper: BT 40 X / Y / Z Travels: 1270 / 670 / 625 mm Table Size: 1300 × 650 mm Maximum Table Load: 1000 kg Rapid Traverse Rates: X / Y: 36 m/min Z: 30 m/min ATC: 30 Places Max Tool Diameter: Ø80 mm with adjacent tools / Ø125 mm without Max Tool Length: 300mm Max Tool Weight: 8 kg Machine Dimensions (Approx): 2760 x 3350 x 2815mm Machine Weight (Approx): 8500kg Features & Equipment Newly rebuilt spindle Nikken 4th Axis preparation 30-station Automatic Tool Changer (ATC) 20 bar through-spindle coolant (TSC) Coolant chiller LNS swarf conveyor Data server / networking capability Fully enclosed, heavy-duty construction Please Note No tool holders, vices, or swarf bin included Ideal For Precision engineering CNC subcontract machining Automotive & aerospace components General and high-speed milling applications The Doosan DNM 650 is known for its exceptional rigidity, accuracy, and reliability, making it one of the most popular vertical machining centres in its class. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,020 mm, feed length Y-axis: 540 mm, feed length Z-axis: 510 mm, nominal power (apparent): 33 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 800 kg, total height: 2,700 mm, total length: 3,750 mm, total width: 2,285 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 500 Vertical Machining Centre – 2012 Fanuc i-Series Control | 12,000 RPM | BT40 | Spindle Rebuilt 2024 2012 Doosan DNM 500 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle (rebuilt 2024), 1200×540 mm table, 30-tool ATC, 20 bar TSC & data server. Available now. Manufacturer: Doosan Model: DNM 500 Machine Type: 3 Axis Machining Centre Control: Fanuc i Series Control Year: 2012 Condition: Very Good - spindle rebuilt in 2024 We are pleased to offer this 2012 Doosan DNM 500 Vertical Machining Centre, a robust and highly accurate CNC milling machine designed for precision engineering, subcontract machining, and production environments. Equipped with a Fanuc i-Series CNC control and a 12,000 RPM BT40 spindle, this machine delivers excellent cutting performance across a wide range of materials. The spindle was professionally rebuilt in 2024, ensuring reliability, accuracy, and long-term service life. Key Specifications Manufacturer: Doosan Model: DNM 500 Year: 2012 Control: Fanuc i-Series CNC Axis Travels X Axis: 1020 mm Y Axis: 540 mm Z Axis: 510 mm Table Table Size: 1200 × 540 mm Maximum Table Load: 800 kg Spindle Spindle Speed: 12,000 RPM Spindle Taper: BT40 Spindle Motor Power: 15 kW Spindle Condition: Rebuilt in 2024 Toolchanger Automatic Tool Changer: 30 Tool Stations Machine Dimensions & Weight Overall Length: 3750 mm Overall Width: 2284 mm Dodpfsyfh H Usx Afnskh Overall Height: 2703 mm Machine Weight: 6,500 kg Features & Equipment Fanuc i-Series CNC control 30-station Automatic Tool Changer (ATC) 20 bar Through-Spindle Coolant (TSC) Data server / networking capability Fully enclosed, rigid Doosan construction Ideal footprint for busy workshops Please Note No swarf bin included No tool holders included No vices included Ideal Applications Precision CNC milling Subcontract machining Automotive, aerospace & general engineering Small to medium batch production The Doosan DNM 500 is renowned for its rigidity, accuracy, and reliability, making it a proven and popular choice for machine shops seeking dependable CNC performance. Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2014, Traverses X Y Z; 762 x 516 570mm, Table size 860 x 570mm, Table load 350 kgs, spindle power 18.5Kw, spindle speed 10,000 rpm, spindle taper BT40, Dsdpfx Ajygkpnefnokh 30 station ATC, Fanuc I control, through spindle coolant, swarf conveyor.

Condition: used, Year of construction: 2013, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, Dkodpfx Afsyffz Nonsh FANUC Oi control, collet chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor, parts catcher.

Condition: excellent (used), functionality: fully functional, cutting diameter: 560 mm, DOOSAN PUMA 400 LMB FANUC 21i CONTROL MAX TURNING DIA 560 MM MAX WORKING LENGTH 2000 MM MAX SWING OVER BED 770 MM Dedpfx Afjyciq Asnokh SWING OVER SADLE 590 MM X Z AND C AXIS - 360 DEGREES 0.001 DEGREES HYD CHUCK 380 MM DIA HYD STEADY ( SMW BLOCK ) SPINDLE BORE 132 MM 12 STATION TURRET SWARF CONVEYOR QUILL DIA 120 MM MORSE TAPER 6 QUILL TRAVEL 120 MM POWER REQUIREMENTS 60 KVA FLOOR SPACE 4220 X 2180 MM WEIGHT 10 TON

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes. Country of Origin: Korea Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Dsdpfx Afoyhdw Ionekh

Condition: good (used), Year of construction: 2006, Doosan Puma 280 CNC Slant Bed Lathe With Fanuc Series 21i-TB Control 3 Jaw Power Chuck. Swing Over Bed Ø630mm. Swing Over Saddle Ø500mm. Recommended Turning Ø420mm. Maximum Turning Ø420mm. Maximum Turning Length 658mm. Maximum Bar Capacity Ø76mm. Axis Travel 'X'=242mm, 'Z'=680mm. Rapid Traverse 'X'=20m/min, 'Z'=24m/min. Maximum Spindle Speed 3,500rpm (23kW Motor). 10 Station Turret. turning Tool Shank 25 x 25mm, Boring Bar Ø50mm. Tailstock Quill Taper MT5, Quill Ø100mm, Quill Travel 100mm. S/No.PM2800047 (2006/10). With Tool Setting Arm, Parts Catcher, Tailstock & Foot Switches. Weight 4,700kg. Dksdpfx Afsydmfmjneh

Condition: excellent (used), Year of construction: 2015, Doosan DNM 500 II CNC Vertical Machining Centre With Siemens 828D (Shopmill) Control Dedjydmd Aspfx Afnekh Table Dimension 1,200 x 540mm (4 'T' Slots). Maximum Table Load 800kg. Axis Traverse 'X'=1,020mm, 'Y'=540mm, 'Z'=510mm. Distance From Spindle Nose To Table Surface 200-710mm. Rapid Traverse 'X'=36m/min, 'Y'=36m/min, 'Z'=30m/min. Maximum Spindle Speed 8,000rpm (22kW Motor). Spindle Taper ISO 50. 26 Position ATC. Maximum Tool Ø125mm (Ø220mm Non Adjacent Tools), Maximum Tool Length 350mm, Maximum Tool Weight 15kg. Tool Change Time 2.5sec (Tool To Tool). S/No. MV0010-003030 (2015). With Coolant System, Dual Auger Conveyor & Signal Tower. Overall Dimensions W3,110 x D2,412 x H,3143mm. Weight 6,500kg.

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Sub spindle and bottom Turret Dodpfxoydigmj Afnekh Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available good package of tooling Shown working on our motorsport jobs all done in one! Can be demonstrated if required.

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes. Country of Origin: Korea Dodsyfgymspfx Afnjkh Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2020, Swing over bed 720mm, Swing over cross-slide 590mm, maximum machining diameter 481mm, Dedpsx Uy Hajfx Afnekh maximum machining length 1275mm, bar capacity 102 mm, 12 station turret, spindle speed 2,800 rpm, Fanuc I series control, tool setter, swarf conveyor, 3 jaw chuck,

Condition: excellent (used), Year of construction: 2012, Maximum turning diameter 406mm, Maximum turning length 520mm, Dodpfxsx T Dhlo Afnekh bar capacity 65mm, Y axis -/+ 51mm, Spindle speed, 4,500 rpm, sub-spindle speed 4,500 rpm, milling speed 5,000rpm, 12 station turret, 18.5 kw main motor, C axis 0.001degrees, Fanuc I series control, parts catcher, tool setter, swarf conveyor, 3 jaw chucks to main and sub spindles, Iemca magazine barfeed

Condition: excellent (used), fuel type: gas, Doosan G15S-2 Forklift truck Serial: DG01041 Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions Dkedpjiy Nppjfx Afnsh

Condition: used, Year of construction: 2019, travel -x axis 1.525 mm travel -y axis 770 mm travel -z axis 625 mm control HEIDENHAIN - TNC620 table dimension (L x W) 1.600 x 750 mm numbers of positions in the tool changer 24 tool taper SK50 Milling machining centers - vertical | DOOSAN - MYNX 7500/50 II equipped with 24-way tool changer, ITC cooling system and chip conveyor. The machine only has 3.165h spindle hours. Dksdpfx Afjyhrbujnjh The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MYNX7500/50II | MYNX 7500 | MYNX7500 | MYNX-7500 | MYNX750050II

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dksdpfx Afew Dgcaonsh #Tags: DNM5700 | DNM-5700

Condition: used, Year of construction: 2014, lifting height: 3,300 mm, fuel type: electric, fork length: 1,200 mm, Empty weight: 3.851 kg Lifting capacity: 2.000 kg Maximum passing height: 215 cm CE mark: yes General condition: average Technical condition: average Visual appearance: average Please contact Christian Theißen for more information Units: 4196 Manufacturer: Doosan Model: B20T-5 FFT Year of build: 2014 Condition: Used Data: Max. lifting height: 3,30 m Max. Lifting capacity: 2000 kg Length forks: 1,20 m Dodpfx Aev Tignefnekh Drive type: Electrical Domensions LxW (without forks): x 1,09 m Building height: 2,15 m Own weight: 3.851 kg Special features: Sideshift, canopy, windscreen, trailer operation possible.

Condition: used, Year of construction: 2011, machine/vehicle number: DWBHEDGOHB0050330, Power: 88 kW, operating weight: 17,660 kg, with quick coupler system, manufacturer: LEHNHOFF, model: HS21-3, operating hours: approx. 6,720 h Dodpfoyf R Diex Afnokh

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 2,000 rpm, travel distance X-axis: 352 mm, travel distance Z-axis: 1,105 mm, spindle motor power: 35,000 W, controller manufacturer: FANUC, number of axes: 2, This DOOSAN PUMA 4100 B horizontal turning machine was manufactured in 2019. It features a maximum turning diameter of 550 mm and a maximum turning length of 1,042 mm. With a spindle speed of 2,000 rpm and 10 tool stations, it offers efficient machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100 B machine we have for sale. Contact us for further details. • Swing over bed: 790 mm • Swing over carriage: 590 mm • Recommended turning diameter: 380 mm • Maximum turning diameter: 550 mm Dkjdpfsyhdbgjx Afnjh • Maximum turning length: 1,042 mm • Bar diameter: 116.5 mm • Spindle nose: ASA A2#11 • Front spindle bearing diameter: 180 mm • Spindle bore diameter: 132 mm • Number of tool stations: 10 • Maximum tool size (external): 32 x 32 mm • Boring bar diameter: 60 mm • Indexing time: 0.25 sec • Rapid feed X-axis: 16 m/min • Rapid feed Z-axis: 20 m/min • Quill diameter: 120 mm • Motorized quill bore taper: MT#6 • Quill travel: 120 mm

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 506 mm, spindle motor power: 15,000 W, controller manufacturer: FANUC, number of axes: 3, This 3-axis DOOSAN LYNX2100LMB was manufactured in 2022. It features a Fanuc control system, a maximum turning diameter of 300 mm, and a length of 510 mm. The X/Z axis travel is 205/560 mm, with a main spindle speed up to 4500 RPM and power of 15 kW. It includes a 12-position turret and various tool holders. Consider the opportunity to buy this DOOSAN LYNX2100LMB horizontal turning machine. Contact us for more information about this machine. • Maximum turning diameter: 300 mm • Maximum turning length: 510 mm • Driven tool speed: 6000 rpm • Main spindle maximum speed: 4500 rpm • Number of turret positions: 12 Additional equipment • Parting tool holder Dsdox D Di Ijpfx Afnokh • Radial tool holder • Axial tool holder • Drill tool holder • Double radial tool holder • Triple drill holder • ER32 collet tool holder with cylindrical shank Technical Specification Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 510 mm, total height: 2,700 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, product length (max.): 3,985 mm, number of axes: 4, This 4s DOOSAN DNM 500II was manufactured in 2016, featuring a table size of 1200 × 540 mm and a maximum table load of 800 kg. With an X-axis travel of 1020 mm and a spindle speed of 12,000 rpm, this vertical machining center offers efficient machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500II vertical machining center. Contact us for further details. • Operating hours: 4,500 • Table size: 1200 × 540 mm • Rapid traverse: X/Y 36 m/min, Z 30 m/min • Tool changer: random arm, 30 stations • Coolant: through‑spindle coolant 20 bar, flood coolant • Preparation: 4th‑axis preparation • Control: FANUC Oi‑M Easy Guide; look‑ahead 200 blocks; electronic handwheel; USB port • Other: automatic door opening/closing; 3‑color status lamp; documentation and CD‑ROM • Condition: Good; perfect working condition • Availability: Immediately available Additional equipment Dkjdpfoyg Iltsx Afnsh • 4th axis: NIKKEN CNC202FA • Chip conveyor • Belt‑type oil skimmer • Air/coolant guns Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2016, operating hours: 300 h, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: iSeries, table load: 400 kg, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis DOOSAN DNM 4500 was manufactured in 2016. It features X/Y/Z travel of 800 x 500 x 500 mm, a table size of 1000 x 500 mm, and a maximum table load of 400 kg. The spindle operates at 10,000 RPM with a BT40/CAT40 taper, complemented by a 24-position ATC. Rapid traverse rates are 30 m/min for X/Y and 18 m/min for Z. Includes a coolant system and full safety enclosure. Contact us for more information. • Table size: 1000 x 500 mm • Tool changer: 24-position ATC • Rapid traverse (X/Y): 30 m/min • Rapid traverse (Z): 18 m/min • Coolant system: Included • Full safety enclosure Additional equipment Dkjdpfxox E Egae Afnoh • NC rotary for 4th axis Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW Dkodpfoxn Amtsx Afneh max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device

Condition: good (used), power: 102 kW (138.68 HP), Year of construction: 2015, operating hours: 4,330 h, Year of manufacture: 2015 Model year: 2015 Drive: Wheel GVW: 15.200 kg CE mark: yes Technical condition: good Visual appearance: good Doosan DX140W-3 – 2015 – 4,330 Operating Hours For sale: Doosan DX140W-3 wheeled excavator in good and well-maintained condition. Year of manufacture 2015 with only 4,330 operating hours. This machine is equipped with a 2-piece boom, providing excellent flexibility and reach, making it suitable for a wide range of excavation, infrastructure and demolition works. Fitted with a CW30 quick coupler and demolition/sorting hydraulic function, allowing immediate use with various attachments. Specifications: Make / Model: Doosan DX140W-3 Year: 2015 Operating hours: 4,330 hrs Undercarriage: Wheeled Boom: 2-piece (VA boom) Quick coupler: CW30 Djdpfeygidqsx Afnjkh Auxiliary hydraulics: Demolition / sorting function Engine: Doosan diesel engine Comfortable cab with excellent visibility A reliable and powerful excavator, known for its low fuel consumption and high operator comfort. Ready for work. Price and inspection upon request Transport can be arranged.

Condition: used, Year of construction: 2008, functionality: fully functional, We offer this used DOOSAN Puma 300C CNC lathe, year 2008, currently located in Spain. Immediately available. Travel distances: X-axis: 282 mm Z-axis: 681 mm Rapid traverse speed: X-axis: 16 m/min Dsdpfxjyg Ndwj Afnjkh Z-axis: 24 m/min Swing diameter over bed: 590 mm Max. turning diameter: 400 mm Max. turning length: 630 mm Centre distance: 690 mm Bar capacity: 102 mm Spindle bore: 115 mm Spindle power: 26 kW Spindle speed range: 10–2800 rpm Tool turret stations: 12 Bar feeder: SpaceSaver SS