Used Doosan Generator for sale (314)

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914013, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Weights Empty weight: 4.800 kg Functional Generator capacity: 630 kVA CE mark: yes Other information Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,35x1,8x2,35 Nsdpow Srarjfx Aa Eewr Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch 2 similar units in stock

Condition: used, Year of construction: 2014, operating hours: 200 h, power: 360 kW (489.46 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 2,110 mm, Empty weight: 3.840 kg Current frequency: 50 Hz Voltage: 400 Nsdpfxjxr U Hge Aa Eswr

Condition: used, Year of construction: 2021, Technical details: rated capacity: 220 kVA Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI Nodpfou U E Edjx Aa Eewr -with battery 2x 12Volt 90 Ah Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm -protection class IP23 -Isolation class H *

Condition: used, fuel type: diesel, Field of application: Construction Generator capacity: 818 kVA Frequency: 50 Voltage: 230 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. Nwedpfxjxcfgrs Aa Esr We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Doosan DP222CC, General information Field of application: Construction Weights Empty weight: 6.200 kg Functional Generator capacity: 1.000 kVA Other information Fuel consumption: 147 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49D Frequency: 50 Voltage: 400 Nwsdpfxethb Ice Aa Eor Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1130 l Transport dimensions (LxWxH): 5x2x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: used, fuel type: diesel, Field of application: Construction Generator capacity: 1.010 kVA Frequency: 50 Voltage: 230 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Njdpexcfglsfx Aa Eewr Wide range of stock that can be supplied immediately.

Condition: used, Year of construction: 2023, operating hours: 1 h, machine/vehicle number: 20220914016, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Nwodpfx Ajxzaqisa Eor

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Nwjdpfxju Sfnco Aa Eor Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement X-Axis Movement 578 mm Z-Axis Movement 2033 mm Tail Stock Njdpfx Ajx D Nkqea Eswr Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2014, operating hours: 2,000 h, Doosan Puma Heavy Duty CNC Lathe Model: 700 L Year: 2014 - October Control: Fanuc 31i – Model B Turning Dia.: 900mm Turning Length: 3200mm Max Swing: 1030mm Spindle Bore: 160mm Nwodpfowqf U Iox Aa Eor Spindle Speeds: To 1500 RPM Machine With: 750mm 3 Jaw Power Chucks Programmable Steady

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, bar capacity 116.5mm, Y axis +/- 75mm, Spindle speed 2000rpm, milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Nwodpfx Aajx I N Rbo Eer Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: good (used), power: 257 kW (349.42 HP), fuel type: diesel, color: orange, Year of construction: 2021, operating hours: 7,835 h, Equipment: air conditioning, Technical information Chassis type: articulated AdBlue system: Yes Make of engine: DC13 Top speed: 40 km/h Empty weight: 22.930 kg Functional Bucket capacity: 4,5 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCWLECJM10066 Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 80 Output of the auxiliary hydraulics: 266 l/min Emission level: Stage V / Tier V Delivery terms: EXW Transport dimensions (LxWxH): 9,244x3x3,66 Production country: KR Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information Nwjdpfxjx Nyrfe Aa Eer

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,083 h, General Data Machine weight 9500kg Control Unit Brand FANUC Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 570 mm Nwodjx D Dzqjpfx Aa Eor Z-Axis Movement 570 mm This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2004, turning diameter over cross slide: 480 mm, turning length: 2,200 mm, turning diameter: 380 mm, spindle bore: 118 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, Doosan Puma 400 Long Bed CNC Lathe Year: September 2004 Control: Fanuc 18 i TB Model: 400 LB Swing Over Bed: 700mm Swing Over Saddle: 480mm Max Turn Dia: 380mm Between Centres: 2100mm Spindle Bore: 132mm Spindle Speeds: 20-2000 RPM Machine With: 375mm Power Chuck Nwsdpfex Iv Duex Aa Eor Fixed Steady Swarf Conveyor Dimensions: 5400 x 1900 x 2300mm High Weight: 11000 Kgs

Condition: good (used), Year of construction: 2014, 780mm Swing, Nsdpfxjx Eluwe Aa Eswr 630mm Swing over the Cross-Slide, 481mm Max Cutting Diameter, 790mm max cutting length, 12 Station Turret, 76mm bar capacity, 3500rpm, 22kW Spindle, Fanuc Oi, Tool setter, 10” 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor, Coolant.

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 15500 kg Main Drive Number of axis 7 Nwjdpfx Ajx D E Raea Eer Spindle Speed 4000 RPM Spindle motor power 22 kW Control Unit Brand FANUC Model Series 31i-MODEL B5 Movement X-Axis Movement 630 mm Z-Axis Movement 1585 mm Y-Axis Movement 115 mm This 7-axis DOOSAN Puma MX2600ST was manufactured in 2014, featuring a robust horizontal turning machine design. It includes a B-axis of +/-120 degrees, extensive X, Y, Z travels, and a bar capacity of 76mm. The machine is equipped with a FANUC 31i-Model B5 control, a 40 station tool changer, and a 22kW spindle motor. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma MX2600ST machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2009, operating hours: 7,000 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, Year: August 2009 Control: Fanuc oi MC Serial Number: NM51H00CAZ Table Area: 1200 x 500mm X Axis: 1020mm Y Axis: 510mm Z Axis: 625mm Spindle Speeds: 12000 RPM Nedpex Iv D Iofx Aa Eswr Spindle Taper: ISO 40 24 Station Tool Changer Swarf Conveyor 4rth Axis Dimensions: 3200 x 2200 x 3200mm High Weight: 7500 Kgs

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, Njdpfx Asx Elr Aea Ejwr 65mm bar capacity, spindle speed 4,500rpm , 16 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Movement Nwodex D Dz Depfx Aa Ejr X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Milling

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 3,200 mm, turning diameter: 900 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, spindle motor power: 45 W, total height: 2,780 mm, total length: 7,360 mm, quill travel distance: 150 mm, quill diameter: 160 mm, swing diameter over cross slide: 800 mm, overall weight: 21,800 kg, swing diameter over bed slide: 1,030 mm, bar passage: 164 mm, spindle nose: A1-15, Doosan Puma 700L Large Capacity Lathe Built 2014 Accessories include Swarf Conveyor, Tailstock with Mt #6 Taper, SMW Hydraulic Steady, 800mm 3 Jaw Chuck, FANUC 32i Control. Nodpfx Aowqf Uuea Eowr

Condition: ready for operation (used), Year of construction: 2012, operating hours: 37,513 h, General Data Machine weight 9500 kg Main Drive Tool taper BT40 Number of axis 3 Nwjdpjx D Dz Rofx Aa Eor Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm Tools Number of index 40 This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle speed 12,000rpm, BT40 spindle taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant Nwsdpfx Aaox Dk Dls Eer

Condition: excellent (used), Year of construction: 2022, Swing over bed 600mm, swing over carriage 400mm, Nwedewq Inqepfx Aa Esr 65mm bar capacity , machining diameter 350mm, machining length 330mm, 12 position turret, Fanuc series I control, Spindle 4500 rpm, swarf conveyor, parts catcher, tool setter, tailstock

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 660mm, Swing over bed 660mm, maximum turning length 1,540mm, Traverses X Y Z 630mm, 300mm (+/-150mm), 1585mm, B axis 240degrees (+/- 120), C axis 0.001 degrees, main spindle speed 3,000rpm, milling speed 12,000rpm, bar capacity 102mm, 40 station ATC, Capto C6 taper, Nedpfjq T Rt Djx Aa Ejwr spindle power 26/18.5 kw, Fanuc 31iB control, probe, swarf conveyor, hydraulic steady, coolant

Condition: good (used), Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, Nwedpfx Aajwnfzce Esr 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,