Used Machining Centres Smallest for sale (65,603)

Condition: used, Year of construction: 2011, HAAS VF-3 Vertical Machining Centre (2011), Traverses X Y Z: 1016 x 508 x 635mm, Table 1200mm x 460mm, Spindle Speed 0 – 7,500rpm, Spindle Taper BT40, Spindle Motor 20Hp, HAAS Control, 40 Station Side Arm ATC, Through Spindle Coolant, Low Volt Light. S/No. 1083369. Country of Origin: U.S.A. Djdpfe Ah Hbcox Acyewd Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2012, XYZ Prototrak LPM Vertical Machining Centre (2012) Traverses X Y Z: 785 x 470 x 530mm, Table Size 900mm x 500mm, Spindle Speed 8000rpm, Spindle Motor Power 11kW, Prototrak, Rapid Feed XYZ Axis 20m/min, Spindle Taper BT40, 16-Station ATC. S/No. M7161, Machine Weight: 4200kg. Country of Origin: United Kingdom Dedpj Ah E Dxefx Acyjwd Location: This lot is located in Leicester, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2013, Doosan DNM650 Vertical Machining Centre (2013), Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle Speed 12,000rpm, BT40 Spindle Taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant. S/No. MV0011-000877, Machine Weight: 8500kg. Country of Origin: Korea Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Dsdpo Ah E S Hsfx Acyswd

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,050 mm, working height: 100 mm, working length: 3,250 mm, TECHNICAL DETAILS Working length: 3,250 mm Working width: 1,050 mm Working height: 100 mm Drilling unit Vertical drilling spindles: 18 Horizontal drilling spindles, X-axis: 4 Dwedpfo Aggu Ajx Acyjd Horizontal drilling spindles, Y-axis: 2 Tool stations: 4 Position: rear MACHINE DETAILS Milling spindle power: 7.5 kW Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Grooving circular saw for X and Y direction, 90° Rear tool changer CE marking

Condition: used, Year of construction: 2010, Mazak VTC820/30 3-Axis Machining Centre. S/No. 200131 (2010) with Mazatrol Matrix Control, X/Y/Z Travels 3000/800/720mm, Table 3500mm x 820mm, Spindle Speed 18,000rpm, Spindle Taper BT40, B Axis Swivel Head +/- 110, Removable Centre Partition. Country of Origin: United Kingdom Dwedpfxo Afnlas Acysd Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Location: These lots are located in Birmingham & Wolverhampton, UK. Please see individual lot for loading information and charges. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2013, A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine is equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Specification Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Djdpfx Acjzzwg Usyjwd Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain. With following options fitted : - Pneumatic tool change ISO 30 - Drilling unit with ER25 collet. - Extended Y axis stroke 400mm - Increased clamping capacity 200mm. Year - 2013 CE Compliant Serial Number - 22170

Condition: used, Year of construction: 2023, Felder Format 4 Profit H80 21.31 Machining Centre. Serial No TBA (2023), F4 Integrate Control, Working Area 3090 x 2100 x 85mm, Travel X/Y/Z = 3860/3500/225mm, 500m3/h Vacuum Table, Main Spindle 10kW, HSK F63 at 1000 – 24000rpm, 15 Position Toolchanger, Length Measurement Tool, Hand Held Remote Control, Loading/Unloading Tables, Upper Table Extraction, Light Guards Location: This lot is located in Gateshead, Tyne & Wear, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Djdpfo Ah Etyox Acyswd Lot 1 of Auction 3516

Condition: used, Year of construction: 2004, Matsuura MAM72-3VS 5 Axis Multi pallet Machining Centre (2004), Traverses X Y Z: 680 x 394 x 625mm, B axis -110/+ 65 degrees, C Axis 0.001 degrees, Pallet Diameter 130mm, Maximum Workpiece Diameter 300mm, Maximum Workpiece Height 300mm, Number of Pallets 40, Spindle Taper BT40, 240 Station ATC, Spindle Speed 12000rpm, Fanuc G-Tech 16I Control, Through Spindle Coolant and Swarf Conveyor. S/No. 15738. Country of Origin: Japan Dwsdps Ah Hcwjfx Acyjd Location: This lot is located in Leicester, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2013, Ref. -No.: 10718 Manufacturer: REIDEN Type: RX 10 Year of construction: 2013 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 40-xxx Turning Speeds: 16.000 RPM X stroke: 1.000 mm Y stroke: 1.100 mm Z - stroke: 810 mm Dodpfx As Ahw Sijcyowd C-Axis: 360° Spindle power: 38 kW Tool Taper: HSK 63 Max. Rapid traverse: 60 m / min Further information: The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 175118, operating hours: 3,203 h, spindle speed (max.): 12,000 rpm, Mazak FJV-200 (2005) Serial Number: 175118 Through Coolant BT40 Tooling Mazatrol 640M control 30 Tool magazine Dwsdpfx Acov Txplsyed 12,000 rpm main spindle full set of manuals This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: used, Year of construction: 2014, CNC machining center Manufacturer: Homag Type: BMG 512 Year of manufacture: 2014 Technical data - Working area X: 7575 mm - Working area Y: 1900 mm - Working area Z: 300 mm - Independent Z axes: 2 - Number of milling spindles: 2 Dwsdpfx Aj Ahyhpjcyod - Liquid-cooled milling spindle - Main motor: 18.5 kW - Maximum speed: 24,000 RPM - 5-axis spindle - Tool clamping system: HSK-F63 - Tool changing stations: 39 - Pick-up changing station - Rotary tool changer, 10-position and 18-position - Number of consoles: 12 - 1 vacuum pump, 300 m3/h - Control system: powerControl PC85, Homag power Touch - Software: Homag WoodWop 6.1 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2003, control: Ultimax tool taper: SK40 table size: 1270 x 610 mm travel: x-1060; y-610; z-610 mm spindle speed: 10000 rpm 40 fold tool changer Dwsdpfx Aoitk I Uecyod internal cooling chip conveyor accessories: 2 hydrl. vices, div. tool holder

Condition: used, Year of construction: 2023, Nakamura Tome AS200L Twin Spindle Turning Centre 5 Axis Machine wtih Nakamura Tome Fanuc CNC Control, Hainbuch Spanntop Mini AXFIX6S Collet Main Spindle, Buck BB206 3 Jaw Chuck Sub Spindle, 15 Position Driven Tool Turret, Renishaw Tool Setting Probe, Parts Catcher, Hydrafeed Multifeed 6S Barfeed, LNS Swarf Conveyor, Filtermist 5800 Oil Mist Filter, Coolant Tank, Transformer. S/No. KL205307 (2023) Dwodpo Afmi Defx Acysd Location: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. Djdpfj Afwinjx Acyswd The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Dwodpfxez S T Ube Acyjd Y axis working area: 2040 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: used, Year of construction: 2020, CMS Athena 3015 5 Axis Machining Centre with OSAI Control. (2020) Traverses X Y Z; 3200 x 1500 x 900mm, B Axis -/+ 120 degrees, C Axis -/+ 370 degrees, Spindle Power 15Kw, Spindle Speed 24,000rpm, 8 Station Tool Change, Tool Size HSK63F. S/No. 9985, Machine Dimensions: 5800 x 2700 x 3350mm, Machine Weight: 7700kg Location: These lots are located in Leicester, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dwedpfx Acs Ah Evboyod

Condition: used, Year of construction: 2018, controller manufacturer: Heidenhain, controller model: TNC 620, _____ Dsdpfo Ah Ndcox Acyswd Description: Year of manuf. : 2018 Control : Heidenhain TNC 620 Speed : 12000 rpm Movement X/Y/Z : 500/450/400 mm Tool holder : SK 40 In General: Year of manufacture:2018 Control system:Heidenhain TNC 620 Travel ranges X/Y/Z:500/450/400 mm Spindle speed:12,000 rpm Tool holder:SK 40 Spindle: Technology:Inline direct drive Speed:12,000 rpm Power:13 kW Torque:83 Nm Tool holder:SK 40 NC swivel table: B-axis:+110°/ -5° C-axis:360° Clamping surface:630 x 500 mm Max. table load:200 kg Tool magazine: Technology:Chain magazine Tool changer:Double gripper Number of stations:30 Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Position Sensors:Direct scales on all axes Chip Removal:Chip conveyor Coolant Supply:Internal cooling, 12 bar Workpiece Measurement:Renishaw PP40 infrared probe Tool Measurement:Renishaw TS27R tool probe Kinematics measurement:3D quickSET Setup mode:Electronic handwheel

Condition: used, Year of construction: 2011, total height: 4,200 mm, total length: 6,000 mm, total width: 3,500 mm, overall weight: 20,000 kg, POS POSmill E 2050 Vertical Machining Centre Technical Data: Manufacturer: POS Type: POSmill E 2050 Year of Manufacture: 2011 Machine No.: 20110407 Control System: Heidenhain iTNC 530 Working Area: Travel Path X-Axis: 2,050 mm Travel Path Y-Axis: 1,150 mm Travel Path Z-Axis: 700 mm Table Clamping Surface: 2,200 × 1,000 mm Main Spindle and Tool Changer: Spindle Speed: 10,000 rpm Tool Holder: HSK 63 Tool Changer: 40 positions Internal Coolant Supply: 20 bar Electrical Data and Weight: Rated Power: 38 kVA Operating Voltage: 400 V / 50 Hz Fuse Protection: 64 A Machine Weight: approx. 20,000 Dimensions (LxWxH) approx.: 6000 x 3500 x 4200 mm Spindle speed: 10000 - rpm Number of tool locations: 40 Control: Heidenhain iTNC 530 Travel Y-axis: 1150 - mm Dwjdpfs Agxw Hjx Acyjd Tool Changer: Yes Machine table clamping surface: 2200 x 1000 mm Tool holder type: HSK 63 Travel Z-axis: 700 - mm Weight approx.: 20,000 kg Travel X-axis: 2050 - mm Year of construction: 2,011 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Loaded on truck under power: Yes

Condition: used, Year of construction: 2014, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2014 Control : Heidenhain TNC 640 Speed : 18000 rpm Movement X/Y/Z : 800/1050/850 mm Tool holder : HSK-A63 Spindle: Technology:Motorspindle Speed:18.000 rpm Power:35 kW Torque:130 Nm Taper:HSK-A63 Cooling:Switching Coolant/Blow air NC-Swivelhead: Technology:Universal millinghead B-Axis:0,001° Swivelrange:-30°/+180° NC-Roundtable: Technology:Roundtable with Palletcarrier C-Axis:0,001° Clamping surface:ø800 x 630 mm Tableloading (max.):1.400 kg In general: Toolmagazine:Wheelmagazine (3 wheels), 273 Stations Rapid travers in X/Y/Z:60 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter, temperature control and Highpressure, 80 bar Workpiecemeasurement:Infrared-Touchprobe, Heidenhain TS 649 Toolmeasurement:Laser, BLUM Micro Compact NT Automation:Palletchanger, 2-fold Oilmistseparation:Interface mechanical prepared Processobservation:Operation mode 4 Dwodpe Ah Admofx Acysd Setup operation:Electronic handwheel Further Accessory:ROTO-Clear, Rinsing pistol

Condition: used, Year of construction: 2014, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2014 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1250/1250/1000 mm Tool holder : HSK-A100 Dwodpfx Aj Ah Adiocysd Spindle: Technology:Motorspindle Speed:12.000 rpm Power:52 kW Torque:430 Nm Taper:HSK-A100 Cooling:Switching Coolant/Blow air NC-Swivelhead: Technology:Universal millinghead B-Axis:0,001° Swivelrange:-30°/+180° NC-Roundtable: Technology:Roundtable with Palletcarrier C-Axis:0,001° Clamping surface:1.000 x 800 mm Tableloading (max.):2.000 kg In general: Toolmagazine:Chainmagazine (2 chains), 240 Stations Rapid travers in X/Y/Z:60 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter, temperature control and Highpressure, 80 bar Workpiecemeasurement:Infrared-Touchprobe, m&h IRP 25.41 Toolmeasurement:Laser, BLUM NT Automation:Palletchanger, 2-fold Oilmistseparation:Interface mechanical prepared Processobservation:Operation mode 4 Setup operation:Electronic handwheel Further Accessory:ROTO-Clear, Rinsing pistol

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. Djdpfx Acstqfv Ieyswd It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: used, machine/vehicle number: 008507, X axis working area: 5020 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Djdezvwnbjpfx Acyswd Total number of tool changer positions: 16

Condition: good (used), Year of construction: 2012, Ref. -No.: 10680 Manufacturer: TOYODA Type: FH 1250 SX Year of construction: 2012 Type of control: CNC Control: FANUC Series 310i-A Storage location: Halberstadt Country of origin: Japan Serial no.: NS 22XX X-Travel: 2200 mm Y-Travel: 1600 mm Z-Travel: 1850 mm Table Dimensions (Lengthxwidth): 1250 x 1250 mm Table Load: 2500 (zu bestätigen) kg Tool Taper: SK 50 Numbers Of Tools In Magazin: 128 (zu bestätigen) Turning Speeds: 20 - 6000 RPM Dimensions Of The Machine Ca.: 10500 x 6300 x 5000 (Platzbedarf) mm m Numbers Of Pallets: 2 Operating hours: 1833 H Further information: TOYODA FH 1250 SX – 1,833 operating hours Horizontal 4-axis machining centre with 2 pallets 1,250 x 1,250 mm and large tool magazine. Control: FANUC Series 310i-A Working range / travels - X-axis: 2,200 mm - Y-axis: 1,600 mm - Z-axis: 1,850 mm - 4th axis: rotary table (B-axis) - Feed X/Y/Z: 1 – 2,100 mm/min (stated as rapid traverse by seller, to be confirmed) Pallets / table - 2 pallets with automatic pallet changer - Pallet size: 1,250 x 1,250 mm (tapped holes, standard version) - Max. pallet swing diameter: Ø 1,600 mm - Max. load fixture + workpiece: 2,500 kg (according to manual, to be confirmed) Spindle - Tool taper: SK 50 - Speed: 20 – 6,000 rpm Tool system - Chain magazine with 128 pockets (120 stated elsewhere, to be confirmed) - Automatic tool changer - Tool length measurement Equipment - Chip conveyor / coolant system KNOLL - Hydraulic unit Dwsdpfo Ahmwkox Acyjd - Electronic handwheel - Set-up station with pallet station - Tooling manual (JTEKT) available Floor space: approx. 10.5 x 6.3 x 5.0 m (L x W x H) Data according to seller's description, subject to technical changes and errors.

Condition: used, Year of construction: 2013, controller manufacturer: Sonstige, controller model: Andronic 3060, _____ Description: Year of manuf. : 2013 Control : Sonstige Andronic 3060 Speed : 42000 rpm Movement X/Y/Z : 550/400/400 mm Tool holder : HSK-E40 Spindle: Technology:Motorspindle Speed:42.000 rpm Power:17kW Taper:HSK-E40 NC-Swivelroundtable: Technology:Integrated 4./5.-Axis B-Axis:-/+ 110° C-Axis:360° Workpiecedimensions (max.):ø400 x 380 mm Workpieceweigth (max.):250 kg Palletclampingsystem:Parotec Partool clamping chuck In general: Toolmagazine:32 stations Rapid travers in X/Y/Z:30 m/min Equipment/Accessory: Positionsensor:Direct scales in X/Y/Z Workpiecemeasurement:Touch probe, Renishaw OMP400 Toolmeasurement:Laser, BLUM Extraction:Graphiteextraction, Keller L-Cut Djdpfx As Ail Nlocyswd Coolingmanagement I:Minimum lubrication Coolingmanagement II:Blow air through spindle Setup operations:Electronic handwheel Further Equipment:Spindlechiller Further Accessory:Misc. Pallets and electrode holders

Condition: ready for operation (used), Year of construction: 2015, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 410 mm Y-AXIS TRAVEL: 610 mm Z-AXIS TRAVEL: 510 mm DISTANCE SPINDLE NOSE-TABLE: 20-530 mm RAPID FEEDS X-Y-Z: 36 - 36 - 24 m/min SPINDLE: 15000 rpm; ISO 40 Dedpfx Ao Ah I Eajcyowd A-AXIS: -120°  +30 ° C-AXIS: 360 ° TABLE DIAMETER: 320 mm MAX ADMITTED LOAD: 100 Kg MAX MACHINABLE PIECE DIMENSIONS: ø 400 X 300 mm HIGH PRESSURE COOLANT: 20 Bar TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 7300 Kg OVERALL DIMENSIONS: 2820 x 2020 x 3100 mm ACCESSORIES: SWARF CONVEYOR ; TOUCH PROBE ; PORTABLE HANDWHEEL