Condition: used, x-travel 1.020 mm y-travel 510 mm z-travel 610 mm surface area 1.020 x 610 mm Gjdpszaf Ixofx Ahnsud spindle tunring speed 10.000 U/min spindle taper SK 40 In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm z-travel 350 mm control Heidenhain iTNC 530 turning speeds 42.000 U/min tool taper HSK 40 E table surface area 470 x 400 mm T-slots 5 max. table load 500 kg Number of working hours 51993 h spindle hours 13858 h total power requirement 15 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Gusdpey Nn Etefx Ahnsd Prior sale is reserved.

Condition: used, Year of construction: 2017, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 20.000 U/min Guodpfxoy Dvnxs Ahnjd tool taper HSK-A63 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition Guodpfx Ajyw Tm Eshnsd and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm z-travel 500 mm A-axis 240 (-120/+120) ° C-Axis 360 ° control Siemens 840 D faceplate diameter 440 mm T-slot - width 14 mm T-slot - distance 75 mm Gedpfxoxq R E No Ahneud max. table load 400 kg max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm tool diameter 125 mm change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories: - Kuka KR200-3 comp Robot Three identical machines are available. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm Gsdjy Tbtljpfx Ahneud spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 4 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: B-7270, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, TECHNICAL DATA Manufacturer: KONDIA Model: B-1050 Year: 2004 Control unit: Heidenhain iTNC530 Serial number: B-7270 TABLE DIMENSIONS Work area: 1200 x 500 mm. T-slots (Nº x Width x Distance): 5 x 18 x 100 mm. Table to floor height: 885 mm. TRAVEL X: 1,000 mm. Y: 500 mm. Z: 610 mm. SPINDLE Spindle taper: BT40 Speed range: 12,000 rpm Guodpjzlycyofx Ahnod Distance spindle to table surface: 140-750 mm. FEEDS Cutting feed rate: 0-30,000 mm/min Rapid traverse rate: 30,000 mm/min ACCURACY Position accuracy (scales): 0.01 Repeatability: 0.006 Resolution: 0.001 MOTOR Spindle motor: 7.5 Kw. AUTOMATIC TOOL CHANGER Nr. of tools: 18 Max. Ø (adjacent tools): 85 mm. Max. Ø (non-adjacent tools): 135 mm. Max tool length: 250 mm. Max. tool weight (1 tool): 6 Kg. Tool taper: ISO 7.388 / BT40 Pull stud bolt: ISO 7388-1 / 2-AJIS B 6.339 WEIGHT Aprox. Weight: 5,500 Kg.

Condition: good (used), Year of construction: 1998, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total length: 1,150 mm, total width: 510 mm, 3-axis CNC machine (VMC) Matsuura - MC-1000 VG X - Travel: 1020mm Y - Travel: 550mm Z - Travel: 510mm Table Length: 1150mm Table Width: 510mm Feed rate X-Axis:15000mm/min. Feed rate Y-Axis:15000mm/min. Gujdpewvhvfjfx Ahnod Feed rate Z-Axis:15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:30kW Speeds / ranges:15000Rpm ATC / revolver: 30 Chip conveyor: yes Length: 2800mm Width: 2500mm Height: 2800mm Weight: 6800kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,953 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 4, This 4-axis Quaser MV184P/12B was manufactured in 2013. It features a maximum spindle speed of 12,000 rpm and a powerful 25 kW motor. The machine includes a NC rotary table, tailstock, and advanced probing systems for enhanced precision. If you are looking to get high-quality machining capabilities, consider the Quaser MV184P/12B vertical machining centre we have for sale. Contact us for further details. • It seems that a power module from Heidenhain is not working properly. • Max. torque: 159 Nm Additional equipment • Tool cooling 20 bar (upgrade from 8 bar) – included Godpfszi Awnjx Ahneud • Cartridge filter for nozzle and flushing system – included • NC rotary table (4th axis) Detron GV255HB with tailstock – included, remains with the machine • Infrared workpiece probe Blum TC50 – included, remains with the machine • Laser tool probe Blum N2 – included, remains with the machine • Portable handwheel (instead of standard fixed handwheel) – included • SEI CMC 2000-KP incl. Sensor J for control – included • Schunk zero-point clamping system – not included • External extraction system next to the machine – not included

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 850 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, controller model: Series 0-M, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, number of axes: 3, This 3-axis SUPERMAX YCM-VMC-85A was manufactured in 1996. It features a table size of 940 × 400 mm, with an X-axis travel of 850 mm, Y-axis travel of 440 mm, and Z-axis travel of 630 mm. The machine is equipped with a spindle speed of 8,000 rpm and a tool changer with 22 positions. If you are looking to get high-quality machining capabilities, consider the SUPERMAX YCM-VMC-85A vertical machining centre we have for sale. Contact us for further details. • Tool taper: BT40 • Table • Outer length: 940 mm Godpfjzizm Iex Ahneud • Outer width: 400 mm • Table load: 250 kg • Number of tool slots: 22 • Chip conveyor: Hinged belt type • External hydraulic power unit • Automatic lubrication system • Pneumatic filtration/regulation unit • Work status tower light (red/yellow/green)

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 560 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of axes: 3, This 3-axis Bridgeport VMC 560/22 was manufactured in 1995. It features an X-axis travel of 560 mm, Y-axis travel of 380 mm, and Z-axis travel of 520 mm. The machine is equipped with a spindle speed of 6,000 rpm and a tool magazine with 22 positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 560/22 vertical machining centre we have for sale. Contact us for further details. Tool taper: BT40Rapid Traverse: X/Y: 20 m/min; Z: 16 m/min • Outer length: Approx. 840 mm • Outer width: 360 mm • Table load: 500 kg • Number of tool slots: 22 • Tool taper: BT40 • Max tool length: 250 mm • Maximum tool diameter (adjacent pocket empty): 130 mm Gujdpozizi Ajfx Ahnod • Maximum tool weight: 6 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 700 mm, Vertical machining center Manufacturer: Hermle Type: C 50 U Machine No.: 19670 Year of manufacture: 2009 Control system: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel distances X: 1000 mm Y: 1100 mm Z: 700 mm Tool changer: 60 positions + 41 (HSK 63) Spindle speed: 18,000 rpm Weight approx.: 21,500 kg - NC rotary table Ø 1150x900 mm - Chip conveyor - Compressed air supply through spindle center Godpfx Ajzl Ahlehnjud - Automatic enclosure roof - Electrical thermal compensation ITNC - IKZ 80 bar paper band filter - Heidenhain measuring probe - Blum tool breakage detection/measurement Milling spindle replaced after 1900 operating hours, new Y-axis replaced after 1900 operating hours, new Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2020, Brother C-00 control system Travel ranges X/Y/Z: 650 x 400 x 435 mm Dual pallet changer, 800 x 400 mm Gsdezlb Ecopfx Ahnsud Spindle speed: 16,000 rpm Tool magazine for 40 tools, BT 30 Coolant pressure: 70 bar 3D measuring probe, OMP 40 Electronic handwheel Chip conveyor

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Technical Data: Gusdpozhiggsfx Ahnod Compressed Air Connection: R 3/8" / 6 bar Machine Connection: R 1/4" approx. 6 bar Operating Pressure: approx. 600 l/min at 6 bar Air Consumption per Cycle: Electrical Connection: 3 x 400 V +/- 5 % / 50 - 60 Hz Control Voltage: 24 V DC Rapid Traverse: X-Y-Z Feed Rate, Stepless: 40 m/min Feed Rate: 0 - 5000 mm/min Tool Change: Chain changer with 30 tool positions Tool Holder: SK 40 Tool Clamping: SK 40, hydraulic Coolant System: Emulsion, 300 l, 100 Spindle Speed: 100 - 18000 min-1 Speed Correction: 80 – 120 % Drilling Performance in St 60 / Aluminum: up to 36mm Ø Threading Performance in St 60 / Aluminum: up to M30 Travel Measuring System: Encoder/Length Measuring System Positioning Accuracy: 0.025 mm Repeatability: 0.015 mm Control: HEIDENHAIN ITNC 530 Data Interface: V 24/RS - 232 - C Travel Ranges X / Y / Z axis: 3200 / 450 / 590 mm Working Area X / Y / Z axis: 3000 / 700 / 500 mm Space Requirement with Safety Fence: approx. 44 m² (8.0 x 5.5 m) Machine Weight with Accessories: approx. 13 tons Sound Emission: Average sound pressure level 79 dB (A) Under the Following Conditions: - Measurement Method: - Operating Condition:

Condition: new, machine/vehicle number: 246203 xxxx, functionality: fully functional, Ideal basis for setting up CNC machines and applications The FB2 flatbed unit is ideal for getting started with CNC technology and is ideal for model making and hobby applications. The FB2 is also often used in industry for measuring and dosing technology, as it offers extensive expansion options. The unit also offers access to the isel modular system. Various sizes from travels of 530 x 500 mm to 1030 x 1250 mm and extensions such as base frame and housing are available and can be individually combined. BEST SUITABLE FOR: • modular isel building block system • universal range of applications • easy handling • ideal for laboratory, model making and workshop use • assembly and mounting • printing and engraving • drilling and milling • dosing and screwing • forming and modeling • gluing and casting • soldering and welding • measuring and testing • sawing and cutting and much more Z-passage = 190 mm (Z-passage = 300 and 500 mm on request!) FEATURES: • durable stepper motors in the 200 W range • reliable LES units with steel ball screws are installed as drives • clamping of workpieces using a T-slotted plate • available with and without protective cover • variable gantry apertures, depending on customer application OPTIONS: • iSA milling spindles and water-cooled HF milling spindles • Cooling spray device • Cold air cooling, Cool-Min • Automatic tool length measurement • Rotation units • Workpiece clamping systems (hand lever, vacuum clamping tables, etc.) • Suction systems Gedpfx Ahohqmamenoud • LED machine room lighting • RAL color selection • CAD/CAM-Software • Diffusers 190 mm, 300 mm or 500 mm • Powerful 4-axis control controller • Underframe • Enclosure with sliding/folding door

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,000 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, controller manufacturer: FANUC, controller model: Series 32i – MODEL A, total height: 2,835 mm, total width: 2,670 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 7,700 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Hyundai Wia F500 was manufactured in 2012. It features a table size of 1,000 × 450 mm and a maximum table load of 600 kg. The spindle speed can reach up to 10,000 rpm, with a continuous power output of 15 kW. If you are looking to get high-quality machining capabilities, consider the Hyundai Wia F500 vertical machining centre we have for sale. Contact us for further details. Control Unit: FANUC Series 32i – MODEL AVoltage: 380 V (3Ø)Frequency: 50 HzRated Power: 23 kVAFull Load Current: 35 AControl Voltage: AC 110 V / DC 24 VSpindle Taper: BT40Spindle Speed Range: Up to 10000 rpmSpindle Power Output (Continuous): 15/11 kW (20/15 HP)Spindle Power Output (Maximum): 20/15 kW (25/20 HP)Spindle Torque (Continuous): 286/143 NmSpindle Drive: Direct Drive (Direct Coupled)Distance from Table to Spindle Nose: 130–650 mmDistance from Column to Spindle Center: 475 mmRapid Traverse (X/Y/Z): 32 / 32 / 32 m/minTool Changer: 30-PositionTool Holder: BT40Maximum Tool Diameter: 90 / 150 mmMaximum Tool Length: 300 mmMaximum Tool Weight: 8 kgTool Change Time (T-T): 1.8 secTool Change Time (C-C): 5.9 secInternal Coolant Pressure: 20 barCoolant Tank Capacity: 300 LLubrication Tank Capacity: 2.6 LHydraulic Tank Capacity: 11 LAir Consumption: 250 l/minPower Requirement: Over 25 kVAOperating Hours: Approx. 12000 hSpare Spindle (Optional, not included)Approx. 105 Tools (Optional, not included) Gusdpfxezimp Uj Ahned Technical Specification Taper Size BT 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2008, This 3-axis HAAS VF-9/40HE vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 2,134 mm, Y-axis travel of 1,016 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 2,134 × 914 mm and a maximum table load of 1,814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-9/40HE machine we have for sale. Contact us for further details. • Travels • Spindle nose to table: 102–864 mm • Table • Size: 2,134 × 914 mm • T-slot width: 15.9 mm • T-slot center distance: 125 mm • Feedrates • Rapid traverse (X): 15.2 m/min • Rapid traverse (Y, Z): 15.2 m/min • Max cutting feed: 12.7 m/min • Spindle • Max torque: 102 Nm @ 1,400 rpm • Bearings: ABEC Class 7 • Electronic spindle orientation • Tool changer • Capacity: 24+1 standard (40+1 optional) • Tool type: CT40 standard / BT optional • Max tool diameter: 76 mm (all pockets filled); 152 mm (adjacent pockets empty) • Max tool length: — Gusdpfx Ahjzil Hronsd • Type: Electromechanical, cam-driven • Tool-to-tool: 2.8 s • Chip-to-chip: 3.6 s • Machine requirements • Power requirement: 14 kVA • Voltage: 200–250 VAC, 3-phase, 50–60 Hz • Air required: 113 L/min at 6.9 bar • Enclosure • Full steel enclosure

Condition: used, Year of construction: 1990, x-travel 500 mm y-travel 300 mm z-travel 350 mm total power requirement 12 kW weight of the machine ca. 3800 kg dimensions of the machine ca. m Gedpet Hwy Ejfx Ahnsud

Condition: used, Year of construction: 2003, x-travel 1000 mm y-travel 800 mm z-travel 700 mm Gjdpfx Ahot Hw Hrensud Control HEIDENHAIN iTNC 530 total power requirement 50 kW weight of the machine ca. 16 t dimensions of the machine ca. m

Condition: used, Year of construction: 1998, x-travel 800 mm Gujdpfx Ast Hwtfohnjd y-travel 500 mm z-travel 510 mm total power requirement 60 kW weight of the machine ca. 10 t dimensions of the machine ca. m

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Gjdpfx Ast Hw Trohnoud Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1997, x-travel 800 mm Guedpfx Ahst Hwx Ionjd y-travel 400 mm z-travel 350 mm total power requirement 40 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 500 mm z-travel 510 mm total power requirement 60 kW Gsdpfx Ajt Hwyrjhneud weight of the machine ca. 10 t dimensions of the machine ca. m

Condition: used, Year of construction: 1997, x-travel 500 mm y-travel 350 mm Gusdpfx Aot Hwqdshnod z-travel 350 mm total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: used, Year of construction: 1987, x-travel 500 mm y-travel 380 mm Gjdet Hw H Espfx Ahnjud z-travel 300 mm Control FANUC total power requirement 12 kW weight of the machine ca. 2300 kg dimensions of the machine ca. m