Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Z-AXIS Ball bearing guide Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Ball bearing guides New high-speed Fanuc alpha i motors AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Hjdpfxozzxk Uj Acgofl Manual Guide i with assistance CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min The technical details provided are given without guarantee, subject to error or omission.

Condition: good (used), Year of construction: 2011, Due to liquidation, this machine is now available. Condition: very good. Regularly maintained. Immediately available. Hurco VMX24t incl. KITAGAWA rotary table Year of manufacture: 2011 Hedpjzzlqhofx Acgefl Number of axes: 5 X-axis travel: 610 mm Y-axis travel: 510 mm Z-axis travel: 610 mm 24-position tool changer Electric handwheel Internal cooling system Winmax control

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Table size (2) 1100x600 + 850x600 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Hfsdpfx Acjzavlusgol Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 85,542 h, travel distance X-axis: 600 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, spindle speed (max.): 16,000 rpm, number of axes: 5, This 5-axis HERMLE C 600 U was manufactured in 2000. It has a net weight of 6500 kg and includes a Knoll unit with internal cooling. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U vertical machining centre we have for sale. Contact us for further details. - Spindle Operating Hours: 31,764 h- Internal Coolant Supply (IKZ) Pressure: 20 bar- Tool Taper: SK40- Operating Voltage: 400 V / 3-phase- Frequency: 50 Hz- Control Voltage: 24 V- Nominal Current: 63 A- Total Connected Load: 42 kVA- The folding roof needs replacement. Hedozyr Rlopfx Acgofl Additional Equipment included: Knoll internal cooling system, approx. 200–300 pieces of various shrink-fit chucks (long & short), mandrels, collets, drill chucks Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 310B069, travel distance X-axis: 760 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fanuc Series 18i-MB, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, BRIDGEPORT XP3-760 - Manufacturer: Bridgeport - Model: XP3-760 / VMC 760 XP3 - Serial Number: 310B069 - Year: 2005 - Machine Type: CNC Vertical Machining Center - CNC Control: Fanuc Series 18i-MB - Number of Axes: 3 - X-Axis Travel: 760 mm - Y-Axis Travel: 610 mm - Z-Axis Travel: 610 mm - Table Size: Approx. 890 × 600 mm - Maximum Table Load: Approx. 907 kg - Spindle Speed: 12,000 rpm - Spindle Motor Power: 25 HP / approx. 18.6 kW - Spindle Taper: BT-40 - Automatic Tool Changer: 30 tools - Tool Change Time: Approx. 4 sec chip-to-chip - Rapid Traverse X/Y: Approx. 43 m/min Hsdpozvf Suofx Acgjfl - Rapid Traverse Z: Approx. 36 m/min - Spindle Nose to Table: Approx. 100–709 mm - Machine Dimensions: Approx. 3,940 × 2,340 × 2,340 mm - Machine Weight: Approx. 6,580 kg

Condition: ready for operation (used), Year of construction: 1994, operating hours: 37,780 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 500 mm, controller manufacturer: HURCO, controller model: Ultimax 3, table width: 450 mm, table length: 1,000 mm, table load: 500 kg, overall weight: 4,600 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details. - Display: TFT- Spindle Speed Range: 30 - 6,000 RPM- Gear / Speed Adjustment: Two-stage gearbox; infinitely variable per range- Tool Changer Type: Umbrella type, automatic- Coolant Supply: Flood cooling- Chip Conveyor: Available- DXF Option: Available on control and floppy disk- Computer Connection: 9-pin; RS-232 (Port 1)- Installed Software Version / Hardware: Ultimax 3 V1.53- Operating Voltages: 440 / 415 / 380 / 220 V, 3-phase- Mains Frequency / Apparent Power: 50-60 Hz / 20 kVA- Rapid Traverse Rate: 15 m/min- Compressed Air Requirement / Operating Pressure: 6 bar- Included Documentation:- Parts Listings & Wiring Diagrams - BMC 30 (1991, English)- Machine Operation and Maintenance (11/1993 Rev. B, English)- Options Manual Ultimax 4 (2004 Rev. A, German)- 2x BMC Operator Manual: BMC 30 with Ultimax 3 (06/1995 Rev. C, German)- Included Software & Backup Floppy Disks:- Optikey Utility Disk - Security Modifier Mill V1.52-V1.59- Optikey Utility Disk - Software Option DXF- Ultimax 3 Version 1.53 - Disk 1 and Disk 2- Ultimax 3 Machine Configuration- Backup Machine Config- Condition & Repair Notes: Machine needs to be rebooted via floppy disks because the buffer battery was depleted. One circuit board was repaired by the machine lab (new capacitors and a new Intel processor installed). Technical Specification Taper Size ISO 40 Hfodpfx Acjzylx Ajgsl

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,450 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, DAHLIH VERTICAL MACHINING CENTRE MODEL MCV 1450 CONTROL FANUC Hfodpjznm Uujfx Acgel 50 TAPER SPINDLE THROUGH SPINDLE COOLANT TABLE SIZE 1600 X 800 TRAVELS - 1450 X 750 X 750 MM TABLE LOAD 2000 KGS GEARED HEAD SPINDLE MOTOR 15 KW ATC MACHINE WEIGHT 14.5 TON

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC machining center Hedelius BC 100 P-3500 Magnum Control system: Siemens Sinumerik 840D Year of manufacture: 2006 Internal machine number: 4 Location: Netherlands Hfedozw Dcnjpfx Acgol Travel ranges: X-axis: 3,500 mm Y-axis: 1,000 mm Z-axis: 770 mm Clamping area: 4,150 x 1,000 mm T-slots: 5 pieces Distance between T-slots: 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Tool holder: DIN 69871 SK 50 Tool magazine: 50 stations Spindle speed: 20 - 4,500 rpm Accessories: - Automatic door - Operating panel - Machine hood - Chip conveyor

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Spindle speed 12.000 min -1 weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. Hfsdpfszw N E Isx Acgel The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750

Condition: not inspected (used), Year of construction: 1994, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 426 mm, overall weight: 6,500 kg, number of slots in tool magazine: 20, FZ18W magnum rotary indexing table, Fanuc OM control BT40 spindle, maximum spindle speed 8,000 RPM Hjdpfx Ajzbal Ijcgefl 20-tool changer 2 tables Nikken dividing head

Year of construction: 2015, condition: excellent (used), VMC 3 axis AMS super dart year of production 2015 Control FANUC MACHINE CAPACITY X - Axis Travel mm 600 Y - Axis Travel mm 450 Hodpfx Acekvpnmjgjfl Z - Axis Travel mm 500 Dist. From Spindle Face To Table Top mm 235 - 735 Table size mm 900 x 450 Max. load on table kgf 400 max spindle speed 15000rpm BT30 high cooling through the spindle automatic tool changer 20 tools weight machine 4500kg with machine chip conveyor with pomps low hours machine

Condition: used, Year of construction: 2008, Cinch Mill 40 milling center ( L et W Machine Tools , Taiwan ) Year 2008 Fagor control X Y Z 1700x820x700 Spindle 6000 rpm Spindle taper BT40 Magazine 24 tools Hfodpfx Acjvwg Tmsgol

Condition: used, Year of construction: 2004, HURCO VMX 64 X-axis travel: 1625 mm Y-axis travel: 865 mm Z-axis travel: 760 mm CNC control: Ultimax 4 table size: 1680 x 890 mm max. table load: 2000 kg spindle taper: SK 40 rapid traverse x/y/z: 18 / 18 / 13 m/min drive capacity – spindle motor: 15 kW Hsdswyna Sopfx Acgofl tool magazine: 40 positions max. spindle speed: 10,000 rpm machine fully operational

Condition: used, Year of construction: 2017, AWEA FCV 620 year 2017 FANUC OiMF Manual Guide 2x Tool probe Renishaw X-axis travel: 635 mm Y-axis travel: 535 mm Z-axis travel: 460 mm B-axis rotary range: -50° ~ +110° C-axis rotary range: 360˚ Table diameter: Ø 650 mm Spindle taper: BT40 Spindle speed :Direct drive 12,000 Cooling through the spindle Spindle motor (cont./min): 11/15 kW (FANUC 12,000 rpm) X / Y / Z axes rapid feed rate: 36 m/min. Tool magazine capacity: 32T Hodpfxovy H U No Acgofl Weight 8500kg

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,660 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: TNC640, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 104, number of axes: 5, This 5-axis SPINNER U5-2520 was manufactured in 2017. It features an impressive X-axis travel of 2,660 mm, Y-axis travel of 520 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 18,000 rpm and a tool magazine capacity of 104 tools. If you are looking to get high-quality milling capabilities, consider the SPINNER U5-2520 vertical machining centre we have for sale. Contact us for further details. • B-axis swivel range: +110° / –90° • Automatic tool changer: 2 magazines × 52 stations (total 104 tools) Additional equipment • High-pressure through-spindle coolant system • Chip conveyor Hfjdpfx Ajzx T E Uocgol Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: FANUC, controller model: MXP-200I, table load: 800 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis YCM MV106A vertical machining centre was manufactured in 2006. It features a generous XYZ travel of 1020 x 600 x 600 mm and a robust table size of 1120 x 600 mm, with a maximum table load of 800 kg. The machine is equipped with a 30-tool automatic tool changer and coolant in the spindle. If you are looking to get high-quality machining capabilities, consider the YCM MV106A machine we have for sale. Contact us for further details. Hfedpezx Th Aofx Acgsl Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, Deckel Maho DMC 103V Vertical Machining Center The machine is in good condition and can be inspected while powered on at any time. Technical data: Year of manufacture: 2003 Hfsdpfx Ajzw U Rcecgel Control system: Heidenhain TNC 426 / 43 Travel ranges: X: 1000 mm Y: 600 mm Z: 600 mm Spindle: 10,000 rpm Tool holder: SK40 ATC with 24 positions Table: 1200 x 600 mm Weight: approx. 6,750 kg Dimensions: 410 x 242 x 275 cm Accessories and options: Coolant tank Electronic handwheel with 3D path control Cooling system with compressed air Operating mode 4 Documentation

Condition: ready for operation (used), Year of construction: 2019, operating hours: 22,918 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 4,250 kg, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis DMG MORI DMP 70 was manufactured in 2019. It features a maximum spindle speed of 24,000 rpm and a weight of 4,250 kg, making it a robust option for precision machining. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMP 70 vertical machining centre we have for sale. Contact us for further details. - Phase: L1/L2/L3/N/PE- Power Consumption: 30 kVA- Maximum Current (A In max): 43.5 A- Rated Current: 50 A- Short-Circuit Current (V max): 5 kA / 440 V max.- Voltage: 400 V ±10%- Frequency: 50 Hz- Control Voltage AC: 230 V- Control Voltage DC: 24 V- Control: 3D Control Siemens 840D SL Operate- Tool Taper: BBT30- Work Table: Integrated NC rotary tilt table, 5-axis simultaneous operation- Swivel Range A-Axis: -120° / +100°- C-Axis Operation: Continuous (Endless)- Maximum Load C-Axis: 100 kg- Table Diameter C-Axis: Ø290 mm- Drives: Torque drives including direct path measurement in A- and C-axis- Software Packages: Sinumerik MDynamics 5-Axis, 3D data model for simulation- Table Options: Clamping pneumatics (1-circuit)- Coolant & Chip Management: Chip conveyor, Production package belt filter with 40 bar internal coolant supply (IKZ), Blow air through spindle center, External blow air, Oil and emulsion mist separator system- Measuring & Monitoring: RENISHAW 3D touch probe kit, Tool breakage monitoring and in-machine measurement, Preparation for 3D quickSET- General Options: Operating mode 3, CE conformity- Automation Interface: Automation interface for external automation on the right- Automation System: DMG MORI WH 3 Cell- Robotic Arm: Fanuc LR Mate 200iD/7L yellow 6-axis robot- Robot Gripper: Double gripper PGN64- Automation Components: 10 DMG drawers, NIO chute, Alignment station, Measuring drawer, Raw material inlay system, Gripper set, Accessories- Machine Operating Hours (from control screen): Machine runtime: 22,918:34 h; Program runtime: 20,920:40 h; Spindle runtime: 18,815:51 h Hodszx Sryopfx Acgjfl

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, functionality: fully functional, Mazak VTC 800/30SR CNC machining center (2009) Manufacturer: Mazak Type: VTC 800/30SR CNC machining center Year of manufacture: 2009 Hfsdpfx Aozy Ac Sscgsl Condition: used, currently in production Operating hours: 34,000 hours Spindle speed: 18,000 rpm Tool magazine: 48 tools Further information will follow.

Condition: used, Year of construction: 2003, operating hours: 14,768 h, machine/vehicle number: 0053, travel distance X-axis: 1,400 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 675 mm, feed rate X-axis: 24 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 42 kVA, controller manufacturer: ITNC 530, controller model: iTNC530, workpiece length (max.): 1,400 mm, workpiece width (max.): 650 mm, workpiece height (max.): 675 mm, workpiece weight (max.): 1,700 kg, total height: 2,489 mm, total length: 3,420 mm, total width: 3,250 mm, table width: 650 mm, table length: 1,400 mm, table load: 1,700 kg, overall weight: 8,800 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 14,768 h, coolant supply: 18 bar, spindle motor power: 42 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We are offering this used Mikron VCE1400+ vertical machining center, manufactured in 2003, for sale. We are not a machine dealer. The machine was only used for single-part production. It has only 14,768 spindle hours. The machine can still operate with an accuracy of 0.01 mm. Extensive accessories are included for immediate production use by the new owner, as can be seen in the pictures. 2x complete steel cabinets with collet chucks and tools, etc. 1x complete tool cabinet with milling cutters. 2x Allmatik vises with approximately 30 soft jaws. 1x edge milling machine. 1x blasting cabinet that can be used with glass beads or corundum abrasive. Hfjdpjzz I Atofx Acgel 1x pallet with three-jaw chuck. 1x pallet with four-jaw chuck. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2015, operating hours: 1,463 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 620, workpiece weight (max.): 250 kg, total length: 908 mm, total width: 480 mm, overall weight: 3,250 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 30, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 130 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining centre FEHLMANN Picomax 56 TOP TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: HEIDENHAIN TNC 620 Stroke X axis: 500 [mm] Stroke Y axis: 400 [mm] Stroke Z axis: 400 [mm] Feed rate on X, Y and Z axes: 20000 [mm/min] Min. distance spindle nose / table: 120 [mm] Max. distance spindle nose / table: 520 [mm] Table dimensions: 908 x 480 [mm] Max. load on table: 250 [Kg] Spindle type: ISO 30 Max. spindle speed: 12000 [rpm] Tool changer magazin number of stations: 20 Max. tool lenght: 240 [mm] Max. weight of single tool: 3 [Kg] Max. tool diameter: 130 [mm] Tool change time: 3 [sec] Chip to chip time: 8 [sec] Number of cutting hours: 1463 [h] Rated current: 25 [A] Supply voltage: 400 [V] Machine weight: 3250 [Kg] INCLUDED EQUIPMENT: Hjdpfxezzmmwo Acgofl HEIDENHAIN linear glass scales on the X, Y, and Z axes x1 FRIBOSA Switzerland precision vise x1 RENISHAW TS 440 part probe x1 RENISHAW TT 140 tool probe x3 ISO30 tool holders x1 FEHLMANN GPRPLUS50 toolsetter x1 coolant tank with pumps x1 spindle chiller Various tightening wrenches Axis locking brackets for machine transport Technical and operating manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall machines, as well as milling, drilling and tapping machines, and CNC grinding machines.

Condition: used, Year of construction: 1986, Mori Seiki MV45/45 from 1986 with Fanuc 11M control, 820 × 555 × 550 mm travels, BT 45 spindle (4.500 rpm, 7,5 kW) and Kitagawa 4th axis for simultaneous 4-axis machining. Professional through-spindle coolant retrofit by Deuschle (15 bar, M50-switched, rotary union through pull stud) and two mechanical gear stages deliver 200 Nm torque; box guideways ensure rigidity. Includes approximately 75 BT 45 tool holders with through-coolant passage and 20 pull studs. CNC CONTROL Controller: Fanuc 11M AXES Number of controlled axes: 4 Number of simultaneous axes: 4 X-axis travel mm: 820 Y-axis travel mm: 555 Z-axis travel mm: 550 4th axis / rotary table: Kitagawa SPINDLE Max. spindle speed rpm: 4.500 Spindle power kW (S1/S6): 7,5 / 5,5 Spindle torque Nm: 200 Spindle taper / interface: BT 45 Gearbox stages / speed ranges rpm: 2 COOLING Coolant through spindle bar: 15 EQUIPMENT & OPTIONS • Box guideways (flat slideways) — very rigid, stable machine • 4-axis simultaneous: Kitagawa 4th-axis rotary unit, hydraulically clamped, fully integrated in the control • Spindle with 2 mechanical gear stages — high torque, 200 Nm in low gear • Through-spindle coolant (IKZ) retrofitted by Deuschle: rotary union through the pull stud, hydraulic clamping/release with pressure intensifier, own 15 bar pump switched via M50 Hsdpfezy Svujx Acgjfl • Chip conveyor at the front, discharging to the right • Approx. 75 BT 45 tool holders included, all with through-coolant passage, plus about 20 pull studs • 4th axis (rotary table)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, CNC machining center Hedelius T7 – 2600 1 R including standby magazine Control system: iTNC 640 Year of manufacture: 2017 Hfodpszwut Djfx Acgol Internal machine number: 68 Travel distances: X-axis vertical/horizontal 2,600 / 2,030 mm Y-axis 750 mm Z-axis vertical/horizontal 695 / 800 mm Swivel range: -98° to +98° Swivel operation: 760 / 1,300 mm Total clamping area 3,080 x 750 mm Table load: approx. 2,500 kg Integrated rotary table Ø 750 mm Interference circle diameter 1,100 mm Tool holder: SK 40 Tool magazine: 33-position Standby magazine: 180 pieces Celox motor spindle: 50 - 12,000 rpm Power: 29 kW Equipment: - KinematicsOpt TNC640 - Handheld control unit HR 510 - Compressed air nozzle on the spindle head - Internal compressed air supply - Inclined bed coolant system 900 l - Internal coolant supply (IKZ) 25 bar - Infrared receiver M & H - 3D infrared measuring probe M & H 25.50 - Exhaust filter - Blow-off guns - Flushing guns

Condition: used, Year of construction: 2003, CNC machining center, universal Hedpfxowwt Nmj Acgofl Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel distances: X/Y/Z = 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 tons 9926ä

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Type: UVA 550 Plus Year of manufacture: 2012 Hjdpfx Aswv Tm Njcgjfl Control: Siemens 828D Operating hours: approx. 3,000 Travel ranges: X/Y/Z: 600 x 400 x 500 mm Tool positions: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon function buttons Chip conveyor Spindle cooler IKZ (internal cooling system) 9926ä