Condition: good (used), Year of construction: 2016, Traverses XYZ: 1524 x 700 x 610mm, table size 1700 x 700mm, Table load 2,000kgs, Heidenhain TNC 620 Control, Din 40 spindle taper, Hnsdezcy Irepfx Al Top 48 station tool changer, Spindle speed 15,000rpm, through spindle Coolant, low volt light, swarf conveyor,

Condition: good (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 18,000 W, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Hsdpjzkry Iofx Al Tonp Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Width: 2400mm Height: 3200mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2014, Traverses XYZ; 1020 x 830 x 245 mm, Table size 1000 x 700mm., spindle taper HSK-E25, 5 station ATC, , Datron software Hjdpszcwk Rofx Al Tsnp

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,690 mm, total length: 2,830 mm, total width: 2,340 mm, table width: 1,150 mm, table length: 580 mm, table load: 900 kg, overall weight: 4,100 kg, spindle speed (max.): 8,000 rpm, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: documentation/manual, rotational speed infinitely variable, Additional options & accessories: - 30-position tool magazine (standard: 22 positions) - Internal spindle cooling. - Original documentation from Bridgeport and Heidenhain. Weight & dimensions: Hjdszi Spyjpfx Al Tsnp approx. 4,100 kg approx. 2830x2340x2690 mm (LxWxH)

Condition: good (used), Year of construction: 2020, Traverses X Y Z; 3200 x 1500 x 900mm. B axis +/- 120 degrees, Hnjdpfxezcv T Do Al Top C axis 370 degrees, Feed rate 90m/min, spindle speed 24,000rpm, spindle taper HSK 63.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control system: Brother CNC 820 Country of origin: Japan CNC machining center, vertical including 4+5 axis LEHMANN EA-410.3A, year of manufacture 1996 Hnodozlt Ucspfx Al Top X-axis travel: 480 mm Y-axis travel: 360 mm Z-axis travel: 270 mm Main spindle: 6 - 6,000 rpm Tool holder: SK 30 Table clamping area: 600 x 300 mm Number of tool positions: 14 Tool change time: 1.2 sec Total power consumption: 9 kVA Machine weight, approx.: 1.8 t Space requirement, approx.: 2.5 x 2.5 x 2.5 m Accessories: Documentation Coolant system

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 9725, SPECIFICATION Table size 1070 x 230mm Longitudinal traverse 660mm Hedpfxoy Uuuxj Al Tenp Cross traverse 250mm Vertical traverse 380mm Quill travel 125mm Quill feeds 0.038 – 0.152mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50 – 3500rpm Approx. weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Newall Topaz 2 axis DRO system Low voltage halogen worklight Guarding Coolant system

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Hjdpfx Ajt Dmlfjl Tenp Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg Hnjdpfxetylazo Al Top   Machine equipped with:- Siemens 810D Shopmill CNC Control Swarf auger Lighting Coolant system Enclosed guarding

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Hsdpfst Dmmvjx Al Tenp Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: used, Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, for sale is a very well-maintained Mazak VCN 530C vertical machining center with Lehmann 500 Series 4th/5th axis from 2017. This machine impresses with its high precision, reliability and productivity and is ideally suited for single part and series production. CNC Control: Mazatrol Smooth G X-axis travel: 1050 mm Y-axis travel: 530 mm Travel Z-axis: 510 mm Machine tablesize: 1300 x 550 mm Spindle speed: 35 - 12,000 rpm Spindle: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 and equipped, among other things, with - Chip conveyor - Cooling by the spindle 15 bar - Renishaw MP60 - Lehmann 4th/5th axle, type 500-Series, T1-510520. LL-TAP2-M14 with Schunk chuck - Lehmann tailstock, type: RST. LIG-80H Hnedpfx Aezinvcel Tsp If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: Hedsx Iikbepfx Al Tenp - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 575 mm, controller manufacturer: FANUC, controller model: 21-M, overall weight: 7,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DAEWOO MYNX 500 was manufactured in 2000. It features an X-axis stroke of 1,020 mm, Y-axis stroke of 510 mm, and Z-axis stroke of 575 mm. The machine includes a table dimension of 1,200 x 500 mm and a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 500 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 1,200 x 500 mm Additional equipment • Chip conveyor Technical Specification Hedezmgiiopfx Al Tonp Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: 620, total height: 2,670 mm, total width: 3,110 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, overall weight: 4,650 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 30, product length (max.): 3,370 mm, number of axes: 3, This 3-axis DMG MORI ecoMill 1035V was manufactured in 2015. It features impressive travels of 1035 mm in X, 560 mm in Y, and 510 mm in Z. The machine has a maximum spindle speed of 12,000 rpm and a robust table size of 1200 x 560 mm, with a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 1035V vertical machining centre we have for sale. Contact us for further details. • Operating hours: 42,000 h (power on) / 17,600 h (spindle cutting) • Table size (L x W): 1200 x 560 mm • Machine working footprint (approx.): 6.3 x 4.55 x 2.808 m • Machine weight (base machine): 4650 kg • Transport dimensions (L x W x H): machine 3.37 x 3.11 x 2.67 m • Notes: New spindle Additional equipment • Chip conveyor • Weight: 505 kg • Transport dimensions: 3.90 x 0.99 x 1.73 m Hnjdpszmgcijfx Al Tep • Internal cooling unit • Weight: 300 kg • Transport dimensions: 1.835 x 1.10 x 1.326 m • Renishaw probe • OTS tool measurement • Vises (approx. 150 kg total) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, total height: 2,755 mm, total width: 3,565 mm, table load: 300 kg, overall weight: 4,650 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 32,000 W, number of slots in tool magazine: 60, product length (max.): 3,765 mm, number of axes: 5, This 5-axis DMG MORI DMU 50 3rd gen was manufactured in 2017. It features impressive axis travels of 650 x 520 x 475 mm and a maximum spindle speed of 15,000 rpm. The machine includes a tool magazine capacity of 60 positions and a robust table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 50 3rd gen vertical machining centre we have for sale. Contact us for further details. • B-axis travel: -35° / +110° Hnjdpfxezmf R Ej Al Top • C-axis travel: ±360° • Table diameter: 630 mm • Machine working footprint: approx. 7.0 x 5.75 x 2.76 m • Transport dimensions (L x W x H) – Machine: 3.765 x 3.565 x 2.755 m • Operating hours: 40,000 h (power on) / 17,700 h (spindle cutting time) Additional equipment • Heidenhain TS 649 tool probe • Blum laser tool measurement system • Vises • Chip conveyor (transport dimensions: 3.2 x 1.396 x 1.29 m) • Internal cooling system/unit (transport dimensions: 1.525 x 1.205 x 1.6 m) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine, HURCO BMC 30 M, year of manufacture 1997 Control system: ULTIMAX 3 Dialog Travel distances: X 762 mm, Y 458 mm, Z 610 mm Table: 500 x 1000 mm Spindle speed: up to 8000 rpm Spindle mounting: SK40 Tool magazine: 24 positions with 24 tool holders Coolant system and vacuum clamping table. The machine was used for milling plastics. Machine is ready for use, machine documentation is available. Hedjzlbytepfx Al Tenp

Condition: ready for operation (used), Year of construction: 2011, operating hours: 70 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC350, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3-axis POSmill E1100 was manufactured in 2011. It features a Heidenhain iTNC350 CNC control, a robust 1,100 mm X-axis travel, and a high-capacity 40-position automatic tool changer. The spindle supports speeds up to 10,000 rpm with ISO 40 tool holder and cooling. Additional features include a full enclosure, safety windows, and a 20 bar coolant system with chip management. If you are looking to get high-quality milling capabilities consider the POSmill E1100 machine we have for sale. Contact us for more information. • Prepared for 4th axis (interface prepared; compatible with Lehmann rotary table) • Table approx. 1,300 × 600 mm • CNC control: direct linear scales X/Y/Z; electronic handwheel; tool breakage monitoring • Spindle cooling; air blast through spindle • Tool system: ATC 40 positions; tool magazine with loading hatch; tool length measurement; tool clamping monitoring • Enclosure & safety: full machine enclosure; polycarbonate safety windows; automatic lubrication system; safety cabinet with air conditioning • Connectivity: USB interface; network connection • News spindle in 2020. New spindle has only 80 hours Additional equipment, not included Hnodpfx Aleycuc Do Tsp • Chip conveyor • High-pressure coolant system, 20 bar with belt filter unit • Coolant flushing system • Hydraulic unit • Workpiece measuring system (25.0 HDR) • Pallet handling interface (optional) Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2008, operating hours: 13,169 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 6,920 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak Vertical Center Nexus 510C-II was manufactured in 2008. It features an impressive X-axis travel of 1050 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1300 x 550 mm and a maximum table load of 1200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak Vertical Center Nexus 510C-II machine we have for sale. Contact us for further details. Hnsdpezl S S Tjfx Al Tep - Control System: Mazatrol Matrix Nexus (with Mazak Voice Adviser)- Axis Travel X/Y/Z: 1050 / 510 / 510 mm- Table Dimensions: 1300 x 550 mm- Maximum Table Load: 1200 kg- Spindle Speed: Up to 12000 rpm- Spindle Details: Completely renewed in September 2025 by Mazak factory service (original replacement spindle cartridge, high-precision version, clamping force 10.1 kN, runout 0.002-0.005 mm)- Tool Taper: SK 40 / BT 40- Tool Magazine Capacity: 30 stations- Tool Changer Type: Double gripper changer- Rapid Traverse Rate: Up to 42 m/min- Total Power-On Time: 46722 hours (as of 07.07.2026)- Automatic Operation Time: 17776 hours- Cutting Time: 15817 hours- Pure Cutting Time: 13169 hours- Weight: Approx. 6920 kg- Power Supply: 3AC 380 V, 50/60 Hz, approx. 33.8 kVA- Control Circuit: AC100V, DC24V- Main Motor: Max. 47 A, 400 V- Included Accessories / Components:* Chip conveyor (chain conveyor) with discharge to chip container* Donaldson Torit DCE oil mist separator* Portable electronic handwheel* Coolant system with spray gun / compressed air gun* Machine vise (NC vise)* Approx. 100 SK 40 tool holders* Tilting chip container (green cart)* Worklight / interior lighting* Full enclosure- Renewed parts during 09/2025 service: Spindle cartridge, rotary joint, non-return valves, filters for air/lubricating oil, oil mist separator element Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,939 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, controller model: Fanuc 0i-MF / AI100, table load: 800 kg, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 6,000 g, number of axes: 3, This 3-axis HARTFORD MVP-11 vertical machining centre was manufactured in 2017. It features an impressive X-axis travel of 1,020 mm, Y-axis travel of 600 mm, and Z-axis travel of 630 mm. The machine includes a robust worktable measuring 1,060 × 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the HARTFORD MVP-11 machine we have for sale. Contact us for further details. • Country of manufacture: Taiwan • Worktable: • Table size: 1,060 × 600 mm • T-slots: 5 • T-slot spacing: 100 mm Hnjdpfozl S Ihox Al Tjp • Automatic tool changer (ATC): • Tool selection: Random • Max tool diameter: 75 mm • Max tool length: 300 mm • Electrical and utilities: • Power supply: 380 V, 3-phase, 50/60 Hz • Power requirement: 28 kVA • Full-load current: 100 A • Short-circuit breaking capacity: 10 kA • Required compressed-air pressure: 6.5 kg/cm² (92 psi) • Operating data (as shown on control): • Operating time: 3,939 h 46 min 38 s • Workpiece counter: 98,086 • Displayed cycle time: 12 min 32 s Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 810D, workpiece height (max.): 190 mm, total height: 2,450 mm, total width: 2,400 mm, table width: 325 mm, table length: 850 mm, table load: 150 kg, overall weight: 2,900 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 12, tool weight: 5,000 g, positioning accuracy: 0.004 mm, product length (max.): 2,300 mm, number of axes: 3, This EMCO VMC 300 Vertical Machining Center was manufactured in the year 2003 in Austria. It is equipped with a Siemens SINUMERIK 810D control unit. The machine features a 12-position automatic tool changer, an SK40 spindle with speeds up to 5,000 rpm, and travels of 420 × 330 × 240 mm (X/Y/Z), making it suitable for precise milling, drilling, and tapping operations. For more information, contact us. • 2x units available (one newer and one older) with different Control Brands • Distance from Spindle Nose to Table: 210 – 450 mm • Number of T-Slots: 3 • T-Slot Width: 14 mm • T-Slot Spacing: 100 mm • Spindle Bearing Diameter: Ø60 mm • Bearing Type: Angular Contact Ball Bearing • Tool Taper: SK40 (DIN 69871 / ISO 7388-I) • Pull Stud: M16 (DIN 69872 / ISO 7388-II) • Automatic Tool Clamping • Tool Clamping Force: 6,000 N • Spindle Overhang: 330 mm • Spindle Motor Power: 9 / 11 kW (100% / 60% Duty Cycle) • Optional Spindle Speed: 0 – 8,000 rpm • Maximum Torque: 100 Nm (5,000 rpm) / 78 Nm (8,000 rpm Option) • Noise Level: 72 dB(A) at 5,000 rpm • Milling Capacity in Steel (16MnCr5 – 790 N/mm²): 220 cm³/min • Maximum Drilling Capacity in Steel: Ø25 mm • Maximum Tapping Capacity in Steel: M20 • AC Servo Drives with Ball Screw Spindles • Feed Rate (X/Y/Z): 0.01 – 12,000 mm/min • Rapid Traverse (X/Y/Z): 12 m/min • Feed Force X/Y: 6,000 N • Feed Force Z: 8,800 N • Resolution: 0.001 mm • Tool Carrier: Drum Type with Direction Logic • Automatic Tool Changer • Maximum Total Tool Weight in Magazine: 36 kg • Maximum Tool Diameter: 100 mm • Maximum Tool Length: 220 mm • Tool Change Time: T1: 5.8 s / T2: 3.9 s / T3: 3.9 s • Chip-to-Chip Time (VDI 2852): T1: 8.9 s / T2: 7.0 s / T3: 7.0 s • Coolant Tank Capacity: 100 L • Coolant Pump Flow Rate: 10 L/min • Maximum Coolant Pressure: 3.7 bar • Coolant Supply: 4 External Nozzles • Automatic Central Lubrication for Guideways and Ball Screw Spindles • Grease Lubricated Main Spindle Bearings • Power Supply: 3/PE ~ 400 V / 50–60 Hz • Maximum Voltage Fluctuation: +5% / -10% • Connected Load: 15 kVA • Rated Current: 22 A • Maximum Current: 25 A • Main Fuse: 35 A (Slow-Blow) • Required Short-Circuit Power: 1600 kVA • Pneumatic System Pressure: 5 – 10 bar • Minimum Air Flow: 750 L/min • Average Air Consumption: 180 L/min Additional Equipment • Automatic 12-Position Tool Changer • Automatic Central Lubrication System • Coolant System with 4 External Nozzles • Automatic Tool Clamping System • SK40 Spindle Interface Machine Benefit: • Reliable 12-Station Automatic Tool Changer • Integrated Automatic Lubrication System for Guideways and Ball Screw Spindles Hnjdpfx Aeya Hg Njl Tep Dimensions Machine Depth 2300 mm Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1615 mm Y-axis: 815 mm Z-axis: 725 mm Hnjdpfxoyy Npno Al Tsp Table load: 2000 kg Spindle speed range: 0 - 10,000 rpm Feed rate: up to 10 m/min Rapid traverse: 24 m/min Footprint (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Accessories / Special features: • CNC control system FAGOR 8055 i/PLUS MS • Internal coolant supply through the spindle, 20 bar • 24-position tool changer • Hinged chip conveyor • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), Year of construction: 2022, operating hours: 3,000 h, FOR SALE HAAS EC-1600 Horizontal Machining Center Exceptional condition – Year 2022 – Available immediately This state-of-the-art machine is ideal for machining heavy and large parts. Commissioned in October 2022, it has been used very little and has been rigorously maintained according to the manufacturer's standards. Technical specifications: - Model: EC-1600 (Generation 10/2022) - Axis travels: X: 1,626 mm | Y: 1,270 mm | Z: 1,016 mm - Table dimensions: 1,626 mm x 914 mm - Maximum load capacity: 4,536 kg - Spindle: ISO 50 - Usage: 3,000 hours - Power supply: 440 V / 3 Phase / 50-60 Hz (35 Amps) 1,300 hours €70,000 Hnedpoyzb S Djfx Al Tep The equipment is ready for shipment. I am at your complete disposal for any further information or to coordinate transport logistics. BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Fanuc Robodrill T14iA Vertical Machining Centre for sale. 1998 model with 8,000 rpm spindle and 14 tool ATC. SPECIFICATION Traverses X Axis 500mm Y Axis 380mm Z Axis 300mm Spindle Nose to Worktable Minimum 250mm Maximum 550mm Work Table Table working surface 650 x 400mm Table loading capacity (uniform load) 200kg Table surface configuration Number of T slots 3 Width 14mm Pitch 125mm Machine Dimensions Width 1550mm Depth 1900mm Height (min/max) 2067 / 2367mm Weight (approximately) 2100kg Spindle Speed range 100 – 8,000rpm Taper BT30 Feedrates Rapid traverse rate 48m/min Feedrate 1 – 30,000mm/min Toolchanger ( MAS BT30 Tools) Tool storage capacity 14 tools Tool change time – cut to cut 0.9 secs (2kg) Tool Diameter 80mm Hedpfxsnq Dgus Al Tenp Tool Length 200mm Tool Weight 2Kg Coolant tank capacity 100 litres CNC Control System Fanuc Series 16iM Electrical Supply 415V, 3 ph , 50Hz Compressed Air Supply 5kgf/cm2 (100 litres/min) MACHINE EQUIPPED WITH:- Coolant system Lighting Enclosed guarding

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1148877, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-10,000rpm Hedpfex Afpgjx Al Tonp Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   Machine Equipped with Haas CNC Control High flow coolant system Lighting Enclosed guarding Manual

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, SPECIFICATION Travel X axis stroke 762mm Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Length 914mm Max. Weight on table 1361kg T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 Hnodpfowx I N Dex Al Tjp General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger