Condition: like new (used), Year of construction: 2009, operating hours: 164 h, Gildemeister CTX 300 Alpha CNC lathe C axis Y axis Tailstock incl. various VDI 30 holders Siemens Shop Turn This is a training machine, hence the low number of hours. Dsb Hewbv D Ijl R U Rskl

Condition: new, Index MS32 DRIVE Z-NC SPK1 Item ID: GM2602.1551 Ball Screw Djb Hl R Ujwb Evme Rskl Item ID: 10912112 Previous Item ID: GM2602.1551 From stock/wear - Offer as shown in pictures -

Condition: good (used), Year of construction: 2003, Functionality: fully functional, spindle motor power: 2,200 W, turning diameter over cross slide: 16 mm, spindle speed (max.): 9,000 rpm, spindle speed (min.): 500 rpm, turning diameter: 16 mm, overall weight: 1,700 kg, Star SA16 RC Swiss-Type Lathe with C-Axis and FMB turbo 2-16/3200A Bar Loader, Very Good Condition Swiss-Type Lathe with C-Axis and Bar Loader, Very Good Condition Model: SA 16-R (with C-Axis) STAR MICRONICS Control: CNC (Fanuc 18i-TB) (6 axes) Country of Origin: Japan With Bar Loader: FMB turbo 2-16/3200A 3m Bar Capacity Max. Machining Diameter: 16 mm Max. Drilling Capacity: 7 mm (9/32 inch) Max. Tapping Capacity: M6 Rapid Traverse in X/Y/Z/ZB: 20/20/20 m/min A: 78.5 m/min Turn. Feed in X/Y/Z/ZB: 10/10/10 m/min A: 10 m/min Main spindle speed: 500...12000 rpm Power, main spindle at 100/40% duty cycle Usage: 2.2 kW Number of tools: 6 Driven tool stations: 3 Rear-side machining unit Max. clamping diameter Clamping diameter: 16 mm Max. workpiece length: 85 mm Spindle speed: 500...8000 rpm Spindle drive: 0.55 kW Max. drilling capacity: 4 mm Max. tapping capacity: M3 Weight: 1.7 t Dimensions: 2163 x 770 x 1650 mm Equipment: C-axis Dkebewbr Ngo Hl R U Rsl Work light Hydraulic unit Coolant system Compressed air system Central lubrication Door guard 4-spindle drill head

Year of construction: 1959, Condition: ready for operation (used), Turning diameter: 1500mm, turning length: 2000mm, a Siemens panel control was installed in 2018. An on-site inspection is possible. Dsbewa Tkij Hl R U Rokl

Condition: used, Year of construction: 2005, Functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 565 mm, turning diameter: 560 mm, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 79 mm, feed rate Y-axis: 80 m/min, chuck outer diameter: 68 mm, overall weight: 7,000 kg, spindle diameter: 250 mm, Equipment: documentation/manual, Y-AXIS LIVE TOOLS CNC HEIDENHAIN Max turning length 600 mm Max turning diameter 560 mm Max turning diameter (over the slide) 565 mm Max turning diameter (over the bed) 680 mm Number of live tools 12 pcs. Max speed of live tools 4500 rpm. Feed rate on Y axis 80 mm (+40/-40 mm) Distance between axes 635 mm Max spindle diameter 250 mm Spindle speed range 25-5000rpm. Max power of the spindle 35 kW Max torque of the spindle 370 Nm Max spindle diameter 68 mm Spindle bore 79 mm Machine dimensions approx. (LxWxH) 3500x2350x3500 mm Deb Hl R Uer I Abxo Rekl Machine weight approx. 7000 kgs EQUIPPED WITH: -Chip conveyor -Y axis -Rest -Tailstock USED MACHINE

Condition: ready for operation (used), Year of construction: 2001, JOHNFORD VTC 880 TWIN PALLET CNC VERTICAL LATHE Djbjukupro Hl R U Rekl MAKE JOHNFORD, MADE IN TAIWAN MODEL VTC 880 + APC + ATC YEAR 2001 CONTROL FANUC 18 T MAX SWING DIA 1,000 mm MAX CUTTING DIA 900.0 mm STANDARD CUTTING DIA 800.0 mm MAX CUTTING HEIGHT 800.0 mm TRAVERSES X AXIS 50.0 mm to 810.0 mm Z AXIS 880.0 mm SPINDLE SPEEDS 10 to 800 RPM SPINDLE BEARING DIA 330.0 mm SPINDLE NOSE A2 - 11 SPINDLE MOTOR 18.5 / 22 kW TURRET TYPE AUTOMATIC TOOL CHANGER NO OF TYPES 2 X 12 ATC TOOLS SHANK SIZE BT 50 AND CAPTO PLUS FULL C AXIS MILLING TAPPING X, Z, C, A AND B AXES HIGH PRESSURE COOLANT PAPER COOLANT FILTRATION SWARF CONVEYOR FULLY OPERATIONAL FULL SET OF MANUALS GOOD RANGE OF TOOLING

Condition: good (used), Year of construction: 2001, CNC axes: 9 (X1, Y1, Z1, C1 + X2, Y2, Z2, C2 + Z3) Siemens 840 D Bar diameter: 36 mm Chuck diameter: 100 mm Turning length: 580 mm Swing over bed: 145 mm X1: 220 mm, Z1: 320 mm, X2: 120 mm, Z2: 340 mm, A3: 380 mm, Y1 & Y2: 30 and C1, C2 each in 0.001° degrees Turning diameter: 100 mm Speed: 2 x 25 - 6,000 rpm Turret (x-station): 2 x 12-station VDI 25 Driven tool stations: 2 x 12 Main and counter spindle speed: 40-8,000 rpm Operating hours: 59,300 h (read as of October 2024) Machine condition: Used in production – age-related wear Dkjb Hl R Uowbtgmj Rol Total weight: Machine approx. 6,000 kg + bar magazine including accessories: 1,500 kg

Condition: good (used), Functionality: fully functional, Type 4 Technical data : Center width approx. 400 mm Center height above bed 120 mm 24 speeds from 71 - 2240 rpm Dkob Hl Rev Syd Ue U Rjl Drive power 0.6 / 0.8 kW Longitudinal feed, infinitely variable approx. 6 - 450 mm/min

Condition: used, Year of construction: 2002, turning diameter max. 300 mm turning length max. ca. 550 mm control PC Fusion CNC 640 T standard turning dia. 276 mm swing diameter max. 525 mm Distance Spindlenose - turret face 115 - 690 mm turning speed range - main spindle 35 - 4.000 min/-1 power capacity - main spindel 22 kW max. Torque 351 Nm spindle nose A2-6" spindle bore 76 mm max. usable bar diameter 64 mm chucking diameter max. 250 mm C-Axis 360 ° number of toolpositions 12 pos. tool taper VDI 40 Shank diameter 25 mm Drill shank diameter 40 mm turret change time 0,2 / 0,6 sec. Spindle speed - driven tool pos. 25 - 4.500 min -1 power capacity - driven tool pos. 3,7 kW max. Torque 35 Nm Spindle speed range subspindle 35 - 4.000 min/-1 power capacity - Sub spindle 7,5 kW max. Torque 57 Nm chucking diameter max. 150 mm x-axis 190 (185 + 5) mm z-axis 575 (580 + 5) mm Traverses Subspindle B: 585 (580 + 5) mm C-Axis 360 ° Dob Hl R Uovq R Uhs Rskl rapid traverse X/Z: 30 m/min rapid traverse C: 400 min/-1 rapid traverse B: 18 m/min feed range X/Z: 0 - 5.000 mm/min feed range C: 1 - 2.000 °/min total power requirement 34 kVA weight of the machine ca. 5,9 t dimensions of the machine ca. 5,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MAZAK - Super Quick Turn 250 MS - Main- and Subspindle - Tool-Drive - C-Axis

Year of construction: 1977, Condition: ready for operation (used), Turning diameter: 1200mm, turning length: 2000mm, speed: 6-178/ 20-600/min, control: Fagor NC. The machine was overhauled in 1999. On-site inspection is possible, available immediately. Dkob Hl R Uswa Tkco Rol

Condition: used, Year of construction: 2012, Used 2012 built Doosan Lynx 220B CNC lathe with Fanuc control, 8” 3 jaw chuck, collet chuck, barfeed, collet chuck, parts catcher, swarf conveyor, tailstock & tool setter. Bar Capacity 51mm Chuck Size 200mm FANUC Oi-Series Maximum Cutting Diameter 320mm Maximum Cutting Length 305mm Rapid Feedrates XZ: 30 x 36m/minute Spindle Motor Power 11kW Spindle Nose A2-6 Spindle Speed 5000rpm Swing 510mm Swing Over Carriage 290mm Tailstock Quill Stroke 80mm Tailstock Taper MT #4 Tool Size 25 x 25mm Dkob Hlovkwh Io R U Rel Turret Positions 12 Station Machine Dimensions 3049 x 1620 x 1655mm Machine Weight 3100kg Control: Fanuc Spec: Spindle Bore 52 mm | Swing 510 mm | Travel X 175 Z 552 mm Accessories: 8” 3 jaw chuck, collet chuck, barfeed, collet chuck, parts catcher, swarf conveyor, tailstock & tool setter. Name of machine: Doosan Lynx 220B Main spindle turning diameter max: 320mm Main spindle turning length max: 533mm Main spindle chuck diameter: 200mm Main spindle max swing: 510mm Main spindle bar diameter max: 65 mm Tail stock quill and body: Standard Rpm: 6,000 rpm

Condition: good (used), Year of construction: 2001, Tsugami BS12-III CNC sliding headstock automatic lathe Dob Hl Rsq H Ea Uj U Rokl TECHNICAL DATA turning diameter: 3-12 mm Turning length: 170 mm Max. Bore diameter: 7 mm Max. Internal thread diameter: M6 Speed: 12`000 rpm Speed, counter spindle: 6`000 rpm Number of axes: 6 Dimensions: approx. 190 x 130 x 220 mm Weight: 2200 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 45,000 h, Emco Maxxturn 45 with Y-axis for sale + Bar feeder and accessories (can be viewed under power) Year of manufacture 2008 On-time hours: 45,000 Very good condition Siemens control with ShopTurn High-pressure pump Has been overhauled and serviced Work performed: Main and counter spindle belts have been replaced! Geometry completely measured and adjusted. Drop tray bearings have been replaced Counter spindle slide plate + wiper have been replaced Dob Hlev I Uavs R U Rokl New main drive module + Complete Euro pallet with tools and various collets + Chucks for main and counter spindles, jaw chucks and collet chucks

Condition: good (used), Tool trolley with inserts with turning holder for NC lathe, Djb Hljv Sybme R U Rskl Shaft: 50 mm

Condition: used, Vertical cnc lathe BERTHIEZ TFM 250 R Dobewbkd Nj Hl R U Rekl

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 168121, Equipment: documentation/manual, rotational speed infinitely variable, Max. turning Ø 130 mm X-Axis 300 mm Z-Axis Dkeb Hewhrniol R U Rel 240 mm Spindle bore 32 mm Speedrange 7000 rpm

Condition: used, CNC Lathe - twin turret - subspindle Y axis NAKAMURA WT 250 CNC Fanuc, Series 16i-T Spindle - sub spindle 1 turret live tools + Y axis 1 turret live tools (lower) 2x C-Axis Swarf conveyor IEMCA TS560P Bar loader Under power in our in our warehouse in Gussago BS. Mimu machine tools Italy Dkob Hl R Uswaa Dio Rjl

Condition: good (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 5005, NC Turning-Mill Center, Berthiez T1-240/50F Year of 1989 Serial No. 5005, Three-jaw chuck, center height 900 mm, swing diameter over bed max. 950 mm, center width 6,500 mm, max. load between centers 10 t, Dkjb Hlewa In Ne R U Rol 50-station tool changer for milling tools, tool changer for turning tools, chip conveyor, drive power for turning operation 75 kW, travel X 700 mm, SK50 cutter holder, drive power 25 kW, 2 steady rests, tailstock, equipped with 20 cutting tools, control system, Siemens, type System8, chip conveyor. Disassembly and transport are to be carried out by the buyer.

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, turning diameter over cross slide: 940 mm, spindle bore: 100 mm, turning diameter over bed slide: 1,250 mm, turning length: 6,000 mm, overall weight: 12,000 kg, The machine is in very good condition Dob Hljwa S S Es R U Rekl visible under power

Condition: excellent (used), Year of construction: 2002, Cycle lathes VDF Boehringer Type DUS 560i year of construction 2002 Center height 280 mm Center distance 2000 mm Turning diameter over bed 570 mm Turning diameter over support 365 mm Control system Sinumerik SIEMENS Bed width 360 mm Spindle bore 62 mm Speed range 3 - 2500 rpm Feed rate: 5000 mm/min Rapid traverse - longitudinal/plane 10 / 5 m/min Quick-change holder Parat Drive power - spindle motor 19 / 15 kW Mounting taper in the tailstock quill MK 5 Quill diameter 80 mm Dob Hljun Rt Uj R U Rjkl Quill stroke 190 mm Coolant device

Condition: used, Year of construction: 1990, Functionality: fully functional, Lathe, make MAGDEBURG, used, well-maintained condition. Technical data: Diameter (max.): 400 mm Djb Hl Rstukqfo U Rjkl Drive power: 60 kW Weight, approx.: 5.5 tons Control: Siemens Sinumatik Face travel, approx.: 300 mm Longitudinal travel, approx.: 280 mm Spindle bore, approx.: 52 mm Turning spindles: 2 pcs. Equipment/special features: various accessories, on pallet; technical documentation

Year of construction: 2002, Condition: ready for operation (used), A Citizen CNC precision lathe is available. Turning diameter: 32mm, turning length: 320mm, front drilling diameter: 12mm, front tapping: M10, bar capacity: 36mm, C-axis resolution: 0.001°, Y-axis: +/-500mm, counter-spindle clamping range: 32mm, speed: 7000rpm, rear machining length: 145mm, tool positions: 10, weight: approx. 3000kg, control: Mitsubishi Meldas M635, operating hours: approx. 90000h. Including coolant unit with 10bar high-pressure cooling, parts catcher, bar feeder FMB Turbo 5-42, collet chuck F37 and chip conveyor. Documentation available. On-site inspection is possible. Dob Hl Rowa A Sis U Rokl

Year of construction: 2004, Condition: ready for operation (used), A Citizen CNC precision lathe is available. Bar diameter: 20mm, turning length: 205mm, main spindle speed: 10000rpm, axes: 7, C-axis resolution: 0.001°, Y-axis: +/-500mm, machine dimensions X/Y/Z: approx. 2200mm/1300mm/1800mm, weight: approx. 2300kg, control: Mitsubishi Meldas M635, operating hours: approx. 65000h. Including coolant unit with 10bar high-pressure cooling, parts catcher, bar loader FMB Turbo 3-26 and collet chuck 145E. Documentation available. On-site inspection is possible. Dob Hl R Uswa A Spj Rskl

Year of construction: 2003, Condition: ready for operation (used), A Citizen CNC precision lathe is available. Turning diameter: 32mm, turning length: 320mm, front drilling diameter: 12mm, front thread cutting: M10, bar capacity: 36mm, C-axis resolution: 0.001°, Y-axis: +/-500mm, counter spindle clamping range: 32mm, speed: 7000U7min, back machining length: 145mm, tool positions: 10, weight: approx. 3000kg, control: Mitsubishi Meldas M635, operating hours: approx. 80000h. Including coolant unit with 30bar high-pressure cooling, parts catcher, bar feeder FMB Turbo 5-42, collet chuck F37 and chip conveyor Knoll with a year of manufacture of 2009. Documentation available. On-site inspection is possible. Dkob Hl R Uowa A R Ss Rel

Year of construction: 2006, Condition: ready for operation (used), A Citizen L-720 VIII CNC precision lathe is available. Turning diameter: 20mm, turning length: 200mm, front drilling diameter: 12mm, front tapping: M8, bar capacity: 24mm, C-axis resolution: 0.001°, Y-axis: +/-500mm, counter spindle clamping range: 20mm, main spindle speed: 10000rpm, counter spindle speed: 8000rpm, rear machining length: approx. 150mm, tool positions: 6 driven + 6 fixed. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1800mm, weight: approx. 2400kg, control: Mitsubishi Meldas 700, operating hours: approx. 75000h. Including coolant unit with 10bar high-pressure cooling, parts catcher, bar feeder FMB Turbo 3-26 and collet chuck 145E. Documentation available. On-site inspection is possible. Dsbjwa A Svo Hl R U Rokl