MaszynyMetal

Condition: ready for operation (used), Selfcentering 3-jaw-chuck 800mm Gbslev H T E Ishcdwvjl

Condition: excellent (used), Grinding diameter 630 mm Grinding length 3000 mm Center height 315 mm Gbsljv Dhpvjhcdwvjl Workpiece weight between centers 2500kg Max. Grinding wheel dimensions 750 x100x305mm Grinding support stroke 90/280 mm Grinding spindle drive 15 kW Space requirement approx. 12 x 4.3 x 1.9 m Total power input 22 kW Machine weight approx. 12 t

Condition: good (used), Swing over the bed: 1250mm Max length of the workpiece: 10000mm Max mass of the workpiece at machining between centres with rest: 10000kg Gelhcdjvprffjwvobl Height of the cutting tool set in tool holder: 50mm

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Gbelhcsu Szucedwvjl Year of build 1970 Serial number 5282 Electric connection 380V Dimension l 5500mm Dimension w 2200mm Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: excellent (used), For sale rotary table for boring machine Table 2000mmx2000mm Table weight 20000kg Max table load 40000kg Travel 2000mm Control Table condition perfect Gbjleui Nt Nshcdwvel

Condition: good (used), Working diameter Ø 2400mm Gslsucdh Tjhcdwvebl Max sheet thickness: 9,5 mm

Condition: good (used), Saw blade PEHAKA HS-820/820 lenght: 10700 Gbelhcdotxlz Newvol width: 67

Condition: excellent (used), Surface grinding machine Make: WMW Heckert Type: SFSRV 1000/2 Power: 45kW Gbolstpawhjhcdwvol Height: 600 mm Rotational magnet: 1.000 mm ø Magnet plate diameter: 1.000 mm

Condition: as good as new (ex-display), Year of construction: 2011, Manual for the operation of a jobstand for a roller dynamometer 1000V in the faculty of electrical engineering Gelhcdoqtyv Towvebl THE JOBSTAND CHARACTERISTICS: A roller dynamometer 1000V was established in order to research new electric motors of frequency converters, as well as to check possible damaged converters and motors for maintenance purposes. This allows to check standard frequency converters 1000V and 440 V, converters with energy recovery to the network 1000V and 440 V, and to check electric motors 1000V and 440 V. An engine of a roller dynamometer can perform work of a motor as well as of a dynamo.

Condition: as good as new (ex-display), Year of construction: 2011, power: 630 kW (856.56 HP), overall weight: 3,340 kg, ABB HIGH VOLTAGE INDUCTION MOTORS Gbjljqctpgehcdwvol Motor Rotor Type 3-Phase Motor Power (KW:) 630 KW

Year of construction: 1996, Condition: excellent (used), TUBE BLASTING MACHINE.Machine is used to clean the inner surface of the copper tube in a continuous process of blasting. Gjljpmtb Rohcdwvjbl

Year of construction: 1980, Condition: excellent (used), Widht: 1000-1676 mm Axis lenght: 1327-2700 mm Diameter of the wheels: 460-1120 mm Axle diameter: 70-200 Gbelhcsnbfcrsdwvol XAD 112, more information on request

Condition: new, For sale, a pipe straightener from the German manufacturer SMS MEER, the machine is brand new, it was dismantled from a plant that collapsed during the delivery and assembly of the machine. The machine has two Siemens 200 kW drive motors each. Straightening rollers have a length of 460mm, diameter on the sides 400mm, diameter in the middle 300mm. The weight of the machine itself is 44 tons, the total weight is 55 tons. I can send a lot of photos before dismentling. Gslhcdwom H Unhevobl

Condition: excellent (used), Polish production Rafamet lathe for sale, efficient machine in good condition after employing electrics and management by Rafamet. The machine worked until the very end, currently disassembled loading machine. Technical data Track width (for normal version) - 1435 mm Track width (for special execution) - 1524 or 1676 mm Wheel diameter - 800-1500 mm The minimum distance between the axes of the sets - 1500 mm Gbslhcsmidwcjdwvjl Maximum axle clamping on the rails - 25 tons Rotation of drive rollers (stepless) - 15-82 rpm Circumferential speed of drive rollers - 7.5-43 mm/min Feeds of copying supports (stepless) - 0.95-34 mm / min Travel of external jacks - 540 mm/min Travel of hydraulic jacks - 410 mm/min Slide travel - 2300 mm/min Sliding rail travel - 9000 mm/min Weight including standard equipment 25 200 kg Installed power 83kW (after modernization 58kW)

Year of construction: 1981, Condition: excellent (used), faceplate diam 1300mm max turning diam 1100mm Gjlhcdwek Dz N Ijvjbl range of turning diam 460-1250mm

Year of construction: 1978, Condition: excellent (used), FORGING HAMMER HUTA ZYGMUNT MPM 6300B Gelhcoivqansdwvobl

Year of construction: 1986, Condition: like new (used), More information on request Gelhcdehmfnhswvebl

Year of construction: 2004, Condition: excellent (used), Type: HRA4/80-4 Gbjlhcdwohmfh Hevsl Pipes: Ø 6 ÷ 24 mm, wall thickness = 1 ÷ 2,5 mm • Point: Ø3 ÷ 12 mm

Year of construction: 1997, Condition: like new (used), UNDER FLOOR WHEEL LATHE RAFAMET UGB 150 Underground lathe for reprofiling train wheels without necessary disassembly Truck guage: 1435 mm Range of wheel tread diameters: 600 to 1,500 mm Maximum axle load: 250 kN Golheg R Syhocdwvobl Minimum wheel base: 1,700 mm Machine is from 1997 Dismantled, ready for shipment.

Year of construction: 2000, Condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. Gslhcsghrguodwvobl The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Year of construction: 2002, Condition: excellent (used), More information on request Gjlhoghg H Escdwvebl

Year of construction: 1981, Condition: excellent (used), UBE 800T ALUMINIUM EXTRUSION PRESS Yom: 1979/2008 Dimensions of recipient; - Diameter of 132mm x 560mm - Diameter of 127mm x 560mm Golhjggrxcecdwvjbl - 90mm diameter x 555 mm Efficiency - Squeezing (maximum tonnage) at 210kg / cm2 800 M Ton - Squeezing (minimum tonnage) at 210kg / cm2 697 M Ton - Servo-side depth. the piston rod forward at 210kg / cm2 112 M Ton - Servo-side depth. rod return at 210kg / cm2 63 M Ton - Sealing recypient at 210kg / cm2 69 M Ton - Opening recypient at 210kg / cm2 94 M Ton - Puncture at 210kg / cm2 102 M Ton - Shift matrix at 210kg / cm2 12 M Ton

Year of construction: 2003, Condition: excellent (used), Powder compacting automatic press DORST DACS15 Yom: 2003 Mechanical high-efficiency automatic press Pressing force: max. 150kN Ejection force: 50kN Gbolhcdwsggrw Rsvel Die support in pressing position: max. 150kN Return force of lower punch: max. 32kN Closing force of upper punch: max. 12kN Upper punch stroke: 90mm Upper punch adjusting travel: 60mm Stroke rate: 8...40strokes/min