Used Chamfer for sale (369)

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2011011, Edge grinding machine, Montresor model Lola 1000 8+6 SX • Belt running direction: LEFT to RIGHT, year of manufacture 2011 #2011011 • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 2 pneumatic lower and 2 pneumatic upper chamfer supports • Belt infeed: Calibration/profiling support • Belt outfeed: Water nozzle support • Table extension console, extended • Machine footprint approximately: 610 x 180 cm • Infeed and outfeed path, each 250 cm Price: • EXW at the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories shown in the pictures are not included with the machine/scope of delivery. Payment terms: • 50% down payment upon order confirmation, 50% payment upon notification of shipping readiness. Warranty: • Machine sold as is, excluding any warranty claims. Inspection: • Possible at the operating site near Passau. Hjdpozwx Hujfx Ac Tot Availability: • After delivery of the new machine in December 2026 / January 2027.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Hedoztl Scopfx Ac Tjt Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, wire diameter (max.): 10 mm, The BLM GROUP E-FLEX is a fully automatic, all-electric, single-head CNC wire-bending machine designed to produce complex 3D wire parts directly from a coil. Key Capabilities Full Automation: It processes wire directly from a spool, seamlessly performing inline operations like straightening, cutting, chamfering, and bending.Dual-Direction Bending: The bending head features a double turret capable of rotating both clockwise and counter-clockwise. This layout allows it to use multiple bending technologies simultaneously to avoid impossible geometries. Continuous Operation: Engineered with a small physical footprint and all-electric axes, it is optimized for non-stop, 24/7 industrial manufacturing. Technical Specifications The system is built to handle heavy production environments with the following configurations: Hedpfxjzu Auwj Ac Tet Parameter Specification Bending CapacityUp to Ø 8 mm (with Wire R=900 N/mm²) or Ø 10 mm (with Wire R=500 N/mm²)Control System5 CNC axes Bending Angle0.1° to 240°Bending Radius 0.5 mm to Infinite Coiler Capacity Up to 1,500 kg Power Consumption22 kW maximum installed power (8 kW average drawn power)Machine Weight2,400 kg (5,291 lbs)

Condition: used, Year of construction: 2009, functionality: fully functional, input voltage: 400 V, power: 1.5 kW (2.04 HP), input frequency: 50 Hz, We are offering this used Hog Maschinen ABRADE MASTER PRO bevel and edge rounding grinding machine, year of manufacture 2009. Year of manufacture: 2009 Rated voltage: 400 V Frequency: 50 Hz Main motor rated power: 1.5 kW Main motor rated current: 16 A Secondary motor rated power: 0.12 kW Bevel and edge rounding grinding machine Variable adjustable bevel 0-12 mm Rounding 2-15 mm radius Including feed and stand Hodpfx Acsy Ir H Ss Tot Description: Belt drive electrically powered, oscillation can be switched on as needed. Feed with 4 speeds. Extraction connection Compressed air connection for belt cleaning If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), HELD E90 Edge Grinding Machine -Motor power: 1.1 kW -Speed: 8,400 rpm -Support/stop surface: 800 x 50 mm -Support length: 500 mm Hodpfx Aoztctkjc Tst -Footprint: 550 x 500 mm -Suitable for deburring -Suitable for breaking edges -Suitable for chamfering Dimensions: L x W x H 0.5 x 1.0 x 1.0 meters / Weight 100 kg Errors and omissions excepted.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2081-9007, total height: 2,200 mm, total length: 1,462 mm, total width: 1,750 mm, workpiece weight (max.): 20 kg, type of input current: DC, overall weight: 3,300 kg, travel distance X-axis: 250 mm, travel distance Y-axis: 795 mm, travel distance Z-axis: 250 mm, input frequency: 50 Hz, input voltage: 230 V, workpiece length (max.): 700 mm, workpiece width (max.): 200 mm, workpiece height (max.): 700 mm, protection type (IP code): IP54, Equipment: documentation/manual, type plate available, Measuring machine with 4 NC-controlled axes, featuring non-contact measurement technology and an additional measuring probe for the automated measurement of micro-precision tools such as milling cutters, drills, step and profile tools. Extended measuring range, specifically for long tools up to 700 mm in length. Due to an additional backlight camera with 400x magnification, even the smallest tools, i.e., microwork tools, can be measured in terms of contour or profile. Thanks to the 400x magnification in both backlight and front light, microwork tools can also be measured using the backlight method. Backlight CCD matrix camera 1, magnification = 50x, diameter (up to 150 mm) and length measurements (up to 700 mm), angle measurements, and radii of the outer contour can be measured. Backlight CCD matrix camera 2, magnification = 400x, observation at the tool circumference, diameter, length, angle measurements, and radii of the outer contour of mini or microwork tools can be measured. Hsdpozvdxaofx Ac Tjt Front light CCD matrix camera 3, magnification = 400x, observation of the side view, e.g., helix angle, chamfer width, chip space depth, chip, spiral, and relief angles. Front light CCD matrix camera 4, magnification = 400x, observation of the end face, axial, relief, and radial angles, chamfer widths, center distances. Tool holder SK 50. Software features, see PDF Software License. The machine is sold as a complete workstation with all existing accessories. Also available with a second

Condition: reconditioned (used), Year of construction: 1985, In 2020, the machine underwent a comprehensive overhaul for €7,000. Documentation is available. Work processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Center drilling Fully automatic work sequence: - Clamping, tool holder closed - Rapid traverse forward - Working feed - Dwell time for cutting Hsdpfoiamn Sjx Ac Tet - Rapid traverse back - Releasing, tool holder open Technical data: Max. workpiece diameter (round) 80 mm Max. workpiece diameter (6-sided) 70 mm Min. workpiece diameter (round and 6-sided) 10 mm Min. workpiece length 450 mm Speed range, infinitely variable Stage I / Stage II = 51-306 / 102-612 Electrical equipment 220/380 V, 50 Hz Motor power, main motor kW 1.3 / 1.8 Motor power, coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Condition: used, Year of construction: 2000, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm Hsdpog Akgtjfx Ac Tot milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 392 kg, total width: 1,500 mm, total length: 4,000 mm, cutting height (max.): 250 mm, type of input current: three-phase, space requirement length: 4,000 mm, space requirement width: 1,500 mm, rotational speed (max.): 6,670 rpm, rotational speed (min.): 6,670 rpm, spindle speed (min.): 6,670 rpm, spindle speed (max.): 6,670 rpm, power of the milling unit: 6,000 W, length stop: 3,000 mm, working width: 500 mm, working height: 250 mm, input voltage: 400 V, power: 6 kW (8.16 HP), Mafell ZAF 250 - EXCELLENT CONDITION Scope of delivery: -1 milling head, complete with reversible blade; -1 support table Maximum wood dimensions (W x H) rectangular: 500 x 250 mm Hodpfxezbnl Ae Ac Tjt Maximum wood dimensions (W x H) 60°: 220 x 250 mm Length of the support with scale: 3000 mm Feed rate: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idling speed: 6670 rpm Nominal power: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly and accurately, efficiently and with a perfect fit. - Straight tenons, angled tenons, corner and mortise joints - the compact ZAF 250 Vario is the right choice. - Using a stop, the exact length scale can be adjusted. -The milling tool, specially developed for the ZAF 250, can be quickly adapted to different tenon lengths and for milling joints. -The ZAF 250 Vario has precise adjustment options and a clear control panel. Thanks to the built-in laser, you can position the wood accurately. Result: Milling with millimeter precision in any type of wood! -After the tenon geometry has been set, the milling head automatically follows the shape of the tenon and delivers the desired tenon - including surface milling, chamfering and beveling. -The ZAF 250 Vario has an adjustable feed rate for applications in hardwoods. Application area: -Tenon and mortise milling up to 60° -Material usage, e.g.: solid wood and glued laminated timber Advantages: -Significant time saving - due to simple and quick adjustment of length, angle and tenon and mortise dimensions. - Maximum wood dimensions 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – thanks to the swiveling head, the workpiece always remains in the same position. -No wood waste - fully dust-extractable.

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-20-8714, functionality: fully functional, Equipment: CE marking, documentation/manual, KDF 860 Edition, serial no. 0-261-20-8714, year 2016 Feed speed 8–20 m/min, rounding 20 m/min, workpiece width 70 mm, (8–22), minimum workpiece length 140 mm, CONFIGURATION: - Pre-milling - Spray separator - EVA adhesive application with QUICKMELT top preheating, Second glue pot A12 EVA (white glue) - Infrared workpiece heating - Side pressure (4 rollers; The first pneumatical) - Trimming with SOFTTOUCH function (smooth unit start-up); straight/angle trimming, exact/with overlap - Multifunctional multi-profile milling unit (R1 + R2 + chamfer); servo-adjustment - 2-motor SERVOTRIM rounding unit—controlled by linear motors on both axes, feed rate up to 20 m/min, soft-touch function for gentle contact of the unit with the workpiece, 4x servo-adjustment - Profile scraper unit – 4x servo-adjustment, dual-profile (R1 + R2) profiling guides with 0.01 mm step - Flat scraper unit, - Spray cleaner - Brushes, - Motorized beam lift, - Motorized infeed fence, Hedpfozuxh Hsx Ac Tjt - Full automation, - POWERTOUCH control system, - moveable workpiece support, - loading guide for narrow parts - upper belt pressure

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,000 h, functionality: fully functional, type of input current: three-phase, workpiece weight (max.): 500 kg, input voltage: 380 V, travel distance X-axis: 3,650 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 150 mm, repeat accuracy: 0.02 mm, table length: 6,000 mm, table width: 2,000 mm, Shuttle SH-4020 – 5-axis abrasive waterjet cutting machine, year 2019 Large-format 5-axis waterjet system for precision cutting of natural stone, engineered stone, ceramics, glass, composites, and metals. The machine has been in regular production use in a stone fabrication facility and is fully operational, available for inspection while powered on. Key Features Generous 3650 × 1900 mm cutting area – handles full slabs and large plates. 5-axis cutting head for bevels, chamfers, miters, and taper-compensated cuts. High-pressure intensifier pump, 37 kW, up to 380 MPa (55,000 psi). Repeatability ±0.02 mm. Table capacity: 500 kg workpiece weight. Cold cutting process – no heat-affected zone, no material distortion. Ready for immediate relocation; located in the EU with convenient transport options across Europe. Hsdpfx Aszvdhnoc Tjt Suitable for: stone and quartz fabrication, architectural elements, inlay and waterjet mosaics, glass and ceramic processing, sheet metal and composite cutting, and job-shop contract cutting.

Condition: good (used), functionality: fully functional, For sale: 1 used facing machine for HSS blades Manufacturer: Loroch Type: AK Blade diameter min/max: 80/710 mm Pitch: 3-25 mm Grinding wheel diameter: 200 mm Drive motor: 0.55 kW Working speed: 10-45 rpm Coolant Weight: approx. 750 kg Can be inspected in our warehouse upon request. Hjdpfxjy Nx Aps Ac Tet

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 10 h, input voltage: 400 V, input frequency: 50 Hz, total width: 1,487 mm, total length: 4,440 mm, overall weight: 1,900 kg, Equipment: documentation/manual, For sale: a practically unused vertical double-spindle glass drilling machine Expoglass PRIAM, year of manufacture 2023. The machine has drilled just under 300 holes — condition as new, like factory-fresh. Fully designed and manufactured in Poland by Expoglass. This is the latest version of the machine — technically almost identical to a new unit (current price of a new machine: EUR 39,000 net). Included in the price of EUR 29,000 net: software update to the latest version inspection including calibration optional installation at the buyer's site and operator training 6 months warranty on wear and mechanical parts Transport not included. The machine can be inspected on site at the current owner's premises. Hsdszv Dunspfx Ac Tjt Advantages: automatic serial drilling of up to 20 holes very simple operation, minimal training time high machining precision — minimises glass cracking and chipping hole chamfering function modular design for fast servicing Technical data: Parameter Value Year of manufacture 2023 Holes drilled approx. 300 Length 4440 mm Height (operating) 2793 mm Height for transport 2100 mm Width 1487 mm Weight 1900 kg Communication 7" HMI panel + analogue buttons Spindle feed automatic, servo-stepper Feed control electronic Loading bar control electronic Spindle speed 700–2800 RPM Drill tip position measurement automatic Drill change with table lowering and spindle lock Spindle depth setting electronic (calculated by controller) Horizontal positioning double-row manual stop system Number of manual stops 6 pcs Material clamping pneumatic Hole chamfering function yes, electronically controlled Drill magazine capacity 70 drills Drill diameter measurement accuracy up to ±5 mm Glass thickness measurement accuracy up to 0.4 mm Loading bar positioning accuracy up to 0.7 mm Serial drilling yes, up to 20 holes Max. glass weight 200 kg (centred; max. 130 kg per half of the bar) Max. drilling height 1050 mm Recommended drills thin-wall "CHAMPION" L=75 mm Online remote support yes

Condition: ready for operation (used), Year of construction: 2010, A Fritz Gross pipe end processing machine is available. Connected load: 11kW, max. pipe diameter: 60mm, weight: approx. 1500kg. An on-site inspection is possible. Hsdpfey Nm Uysx Ac Tjt

Condition: used, Fully automatic RATTUNDE line ACS100/2 integrating: · cutting, · brush deburring, · facing / chamfering, · 100% length control, · automatic robotic packing with double output system · and very large set of tooling. Designed for high-precision single or double cuts. Hsdpfx Acoyz Rvxj Tst One of the fastest tube cutting machine on the market. TECHNICAL DATA Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25* - 2.000 mm (*25 - 150 mm with special tooling) Performance: Up to 1.500 pieces/hour SCOPE OF SUPPLY 1. BM 8 bundle loading magazine in light construction 2. ACS 100/2 Cutting production system with piece counter 3. Brush deburring machine BDM 4. Chamfering machine CFM 5. Length measuring device Pi 6. Automatic stacking robot SRT 7. Safety fence with light barrier to secure the BM bundle loading magazine 8. Step conveyor SCB for the transport of pieces 9. Conveyor for test tubes 10. Complete set of tooling 11. Switch cabinet & control system for the complete line Performance: Up to 1.500 pieces/hour Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25 - 2.000 mm (25 - 150 mm with special tooling) Thickness: From 0,5 mm to solid

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0-261-07-3237, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, actuation type: electric, total height: 1,580 mm, total length: 4,780 mm, total width: 1,130 mm, overall weight: 1,630 kg, Equipment: CE marking, documentation/manual, I am offering a professional edge banding machine from Brandt, model Optimat KDF 430. * Brand: Brandt (HOMAG Group) Hodpszrtbpofx Ac Tst * Model: Optimat KDF 430 * Year of manufacture: 2008 * Functions: Edge banding with EVA glue * Second glue tank for color changes * Diamond pre-milling cutter * Trimming unit * Pressure rollers * Circular saw for length trimming * Milling unit, top/bottom: rounding, chamfering, flush trimming * Corner rounding unit * Profile trimming blade * Surface trimming blade * Max. workpiece height: 60 mm * Max. edge thickness: 6 mm solid wood The machine is fully functional and ready for operation! Available from week 40/2026. Please feel free to contact me if you have any questions.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, wire rod diameter range: 5,0 - 30,0 mm wire rod length: 100 - 1.000 mm Hedpfjylb Hzex Ac Tst output: max. 60 rods per minute

Condition: used, Bar pointing/chamfering machine PAREX Hsdpfxjzrp D To Ac Tet

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Hjdpjzrd Tvofx Ac Tjt

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed speed: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x100mm, 4x80mm, including the piping shown, leading to 200mm Easy-Touch control with color screen for easy machine operation 10 programs can be saved Units: Hedszn Afpopfx Ac Tst Top pressure with manual adjustment using a crank and SIKO counter Infeed guide with manual adjustment and SIKO counter Joining cutter with diamond cutters, sharpened A total of 2 interchangeable glue tanks for quick color changes from white to transparent Gluing unit with automatic edge feed for roll material up to 3 mm Pressure zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and radius Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking Operating manual as a folder All cutting inserts of the milling units and the trimming blades have been replaced or re-sharpened, saws sharpened, diamond joining cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been replaced, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses replaced. Approx. 1200 operating hours, which is only 1/2 hour per day. Machine dimensions: approx. 4300 (with table) x 1250 x 1600 mm (LxWxH) Weight: approx. 950 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."

Condition: used, Technical details: max. wheel diameter: 600 mm max. module: 6 weight of the machine ca.: 0,9 t Hodpsya Rhkofx Ac Tot dimensions of the machine ca.: 1,52 x 0,91 x 1,45 m

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor Hsdjm Nb Riepfx Ac Tet >control panel >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm

Year of construction: 2003, condition: used, Technical details: Hjdezbbx Aopfx Ac Tst weight of the machine ca.: 8,5 t

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg Hodpfx Acsu Ngfde Tot dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: used, For sale: Professional pipe beveling/chamfering machine by FEIN with GF (Georg Fischer) RA4 head, mounted on a solid workshop stand for pipe processing. This device is used for beveling pipe ends prior to welding—preparing a V-type weld edge. Industrial equipment used in pipeline workshops, industrial installations, and when constructing process plant systems. The machine is of very robust construction, made in Germany. Comfortable operation thanks to a stable stand. Technical data • Drive manufacturer: FEIN – Made in Germany • Model: 680 CB1641 • Power: 1600 W Hsdpeyt Ifgofx Ac Tjt • Voltage: 200–240 V • Frequency: 50–60 Hz • Current: 8.8 A • Speed: 150–270 rpm Head • Manufacturer: Georg Fischer (GF) • Type: RA4 Applications • Pipe beveling • Pipe preparation for welding • Pipeline work • Welding workshops • Industrial installations Visual and technical condition as shown in the photos. Solid industrial-grade machine.