Used Bored for sale (4,127)

Condition: good (used), Internal article no.: 24018 HSK-A63 B089Bkar Boring head / fine boring head digital Wohlhaupter Multibore D65-83

Condition: ready for operation (used), Year of construction: 2006, Functionality: limited functionality, turning diameter over cross slide: 540 mm, turning length: 1,500 mm, turning diameter: 800 mm, workpiece weight (max.): 2,200 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 810 Dpl, No minimum price - guaranteed sale at the highest bid! Cfpur9Soe TECHNICAL DETAILS Condition: One stage of the gearbox is defective. Turning diameter: 800 mm Turning length: 1,500 mm Max. turning diameter over facing slide: 540 mm Workpiece weight - clamped on the fly: 750 kg Workpiece weight - with 1 setting vice: 2,200 kg Spindle bore: 83 mm Drive power: 20 / 28 kW Control: Siemens Sinumerik 810 Dpl MACHINE DETAILS Machine weight: approx. 6 tons Space requirement: approx. 3.5 x 2.8 x 2 m EQUIPMENT - Machine does not have a tailstock - Without tools and clamping jaws

Condition: ready for operation (used), Year of construction: 2000, operating hours: 60,240 h, Functionality: fully functional, turning length: 1,000 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 88 mm, travel distance X-axis: 340 mm, travel distance Y-axis: 70 mm, TECHNICAL DETAILS Control unit: Fusion 640 MT Turning diameter: 610 mm Turning length: 1,000 mm Spindle bore diameter: 88 mm Spindle speed: 0-3,500 1/min Spindle drive: 32 kW Face travel (X): 340 mm Y-travel: ±70 mm Longitudinal travel (Z): 1,000 mm Hnmoffri8 Minimum indexing of the main spindle (C-axis): 0.001° Tool data Tool positions: 40 Spindle speed driven tools: 4,000 1/min Spindle motor driven tools: 4 kW Tool type: KM 63 MACHINE DETAILS Required floor space: 4 x 2.4 x 2.2 m Weight: 9.6 tons Operating hours spindle 1: 60,240 h Spindle 2 operating hours: 2,791 h EQUIPMENT - Chip conveyor - Jaw chuck with 315 mm diameter - Tailstock

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, workpiece weight (max.): 2,800 kg, workpiece diameter (max.): 240 mm, turning length: 2,515 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Greatest length (center of eye to end of shaft): 2,515 mm Smallest length (center of eye to end of shaft): 700 mm Largest outer eye diameter: 240 mm Smallest outer eye diameter: 124 mm Centering hole size on the eye side: Standard tool R4x8.5 and R6.3x13.2 Centring hole size on the shank side: Special tool for centring and facing R4x8.5 and R6.3x13.2 Facing diameter: 50 mm Workpiece shank diameter: approx. 50 - 125 mm (unmachined) Lubricating oil hole: Drilling and tapping = M10x1 and M14x1.5 / facing: Ø 22 and 24 mm Lubricating oil bore position: Angle 30° / 32° / 35°, lateral distance 0 - 40 mm DESIGN - Sturdy welded substructure - Table top with coolant drip edge and central drain - Lifting pump for coolant under the table top - Drilling unit with centering tool and electric motor drive (constant tool speed, optional 2 speeds) - Drilling unit with special tool for centering and facing, constant speed FUNCTIONALITY - Automatic start: Machining of both faces of a workpiece with centering holes and oil holes in three machining steps - Return of the drill unit to the home position - Protective cover opens automatically Cqno7Fk3Cm MACHINE DETAILS Dimensions: 1,170 x 4,200 x 1,390 mm Total length: approx. 5,300 mm Depth (without control panel): approx. 1,100 mm Workpiece center (above floor): approx. 1,100 mm Processing time (from start to home position): approx. 90 s Mass: 2,800 kg Electrical connection: 230/400 V, 50 Hz Electrical connected load: approx. 4 kW Control cabinet size (W x H x D): approx. 800 x 2,000 x 600 mm EQUIPMENT - Centering tips - Jaw sets - Clamping jaws

Year of construction: 2013, Condition: excellent (used), A pair of You Ji YV250 Vertical Borers Max Swing Dia - 500mm Max Turning Dia - 350mm Ofwdyqbtp Max Turning Height - 250mm Spindle speed 50-2500rpm Spindle bearing diameter 100mm Spindle Nose A2-8 Turret Type - 6 Station Number of Tools - 6 X axis travel -50,+300 Z axis travel 450mm X axis rapid traverse 12m/min Z axis rapid traverse 24m/min Spindle motor P22 11/15 kw X axis servo motor 1.6kw Z axis servo motor 3kw Hydraulic motor 2.2kw Coolant motor 0.5+1kw 10" / 250mm 3 Jaw Auto strong close centre Chuck Boring bar brush Drilling sleeve MT2 and MT3 Chip conveyor and coolant tank Fanuc Series Oi-TD control Dimensions - L 2920mm W 1480mm H 2460mm Weight 4500kg Power capacity 30kva

Year of construction: 2007, Condition: ready for operation (used), General Data Measurements width 7543 mm Measurements depth 4715 mm Measurements height 3706 mm Machine weight 22500 kg Control Unit Brand HEIDENHAIN Model iTNC530 Rttumwfhy Main Drive Number of axis 4 Movement X-Axis Movement 2200 Y-Axis Movement 1600 Z-Axis Movement 1600 W-Axis Movement 550 Table Outer length 1200 mm Outer width 1500 mm Additional Equipment B Axis: 1 degree / Rapid Feedrates: 12 m/minute This 4-axis Dugard HBM4 boring machine was manufactured in 2007. It features a robust 22500kg frame, with XYZ traverses of 2200 x 1600 x 1600mm, and a W axis of 550mm. The spindle supports a speed of 35-3000rpm and a motor power of 20/30kW. It accommodates a maximum workpiece weight of 5000kg and a tool change capacity of 60 stations. If you are looking to get high-quality boring capabilities consider the Dugard HBM4 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Condition: good (used), Year of construction: 2011, 400mm swing over bed, 216mm Swing over the Cross-slide, 760mm between centres, 54mm spindle bore, 2500rpm spindle, 5.75kW Spindle Motor, Prototrak SLX Control, Cm9Eiraq9W 3 jaw chuck, auto toolpost, Tailstock, Coolant

Condition: used, Year of construction: 2004, HANKOOK MODEL PROTEC 9NC x 3000, UNIVERSAL CNC LATHE WITH 254 MM DIAMETER SPINDLE BORE, REAR 4-JAW INDEPENDENT CHUCK, V8 AUTO INDEXING TOOLPOST & FANUC 21iT CONTROL SYSTEM SWING OVER BED 950 MM SWING OVER CARRIAGE 630 MM MAX.TURNING DIA. 950 MM DISTANCE BETWEEN CENTRES 3000 MM LOAD CAPACITY BETWEEN CENTRES 5000 KG MAX.TURNING LENGTH 3000 MM SPINDLE BORE 254 MM SPINDLE SPEEDS 2 to 1000 RPM NUMBER OF SPINDLE SPEED RANGES 2 – AUTOMATIC SELECTION TRAVERSE RATES MAX PER MIN X: 4M/MIN Z: 6M/MIN NUMBER OF TURRET STATIONS 8 SPINDLE DRIVE MOTOR 37/30 KW TAILSTOCK QUILL TRAVEL 250 MM ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT REAR 254 MM DIAMETER 4 JAW INDEPENDENT CHUCK, DUPLOMATIC V8 ELECTRIC AUTO TOOLPOST, COOLANT AND LIGHTING, FULL LENGTH REAR CHIP GUARD & SLIDING FRONT DOOR, 250 to 450 MM DIAMETER 3 POINT ROLLER STEADY REST, PREPARATION FOR FITTING OF BORING ATTACHMENT, STANDARD ACCESSORIES. CE MARKED MACHINE, LENGTH 5470 MM WIDTH 2205 MM HEIGHT 1890 MM WEIGHT 9170 KGS Cntb077J

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse 2Myk2Yew Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: excellent (used), Year of construction: 2021, 2021 Star SR-20R IV Type B CNC Sliding Head Machine with Fanuc 31i-B5 Control and FMB Turbo 2-20 Magazine Bar Feeder Oo2Myfun3 JBS Collet Guide Bush System. Max. Machining Ø20mm. Max. Headstock Stroke 205mm. Main and Sub Spindle with C Axis. Rapid Feed Rate 35m/min (X1, X2, Y1, Z1, Z2) 15m/min (Y2). Max. Spindle Speed 10,000rpm. Max. Spindle Motor 2.2kW (continuous). Driven Tools Max. Speed 8,000rpm. Motor 1kW. 27-Position Tool Station. Fully Programmable 3 Spindle Angular Drilling Station. Back Working Chuck Max. Ø20mm. Max. Length for Front Ejection 80mm. Max. Sub Spindle Speed 10,000 rpm. Run Hours as of 19/12/2024 3,600. Machine Dimensions (W)2,334 x (D)1,200 x (H)1,700mm. Weight 2,600kg. S/No.1065 (102). With FMB Turbo 2-20/3200/22 GB/NGB Magazine Bar Feeder with Max. Bar Length 3,200mm. S/No.21-301894 R:1941126. UB20-2000-8T Hydrajet High-Pressure Coolant System Max. 140 Bar. S/No.1640 (03/2022). Firetrace Fire Extinguishing System. Exomist HEPA HPMCD1000 Fume Extractor Airflow 1000 m³/h. Power 55kW. S/No.21-165-001 (2021). Integrated Conveyor Parts Handling System. Control Tower. Please Note: Quantity of Assorted Tooling Including 451.0 JBS Unit, Sub Collet for Parts Ejector A, Parts Ejector A, 0R161 Milling Unit ER16, WD 06 22 80 Boring Sleeve 6mm, WD 08 22 80 Boring Sleeve 8mm, WD 10 22 80 Boring Sleeve 10mm, WD 16 22 80 Boring Sleeve 16mm.

Condition: excellent (used), Ajax Model 2 UM Universal Milling Machine Model: 2 UM Table Area: 1400 x 340 mm Long Traverse: 950mm Cross Traverse: 275mm Vertical Traverse: 500mm Spindle Speeds: 35-1400rpm Motor: 7.5KW Machine With: Vertical Swivelling Head (40 ISO) Arbour Support Arbour Coolant Equipment Tooling Manual Dimensions: 1800 x 1800 x 2100mm high Weight: 2370 Kgs Illwrxkk0

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, USED HANKOOK VTB125E VERTICAL TUNRING AND BORING MACHINE WITH FANUC 32i CONTROL. YEAR OF MANUFACTURE 2015 SN 46L10179EF-011686 AVAILABILITY - Ex Stock - Subject to Prior Sale HEAVY DUTY HIGH PERFORMANCE, ELEVATING CROSSRAIL, RAM TYPE CNC VERTICAL TURNING MACHINE WITH HARDENED & GROUND BOX GUIDEWAYS MACHINE CONSTRUCTION & FEATURES  RAM TYPE 2-AXIS VERTICAL BORING & TURNING MACHINE.  HEAVY-DUTY CAST-IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HEAVY DUTY HARDENED & GROUND SLIDEWAYS TO PROVIDE INCREASED STABILITY & RIGIDITY.  2 STEP AUTOMATIC GEAR CHANGE.  12 POSITION TOOL MAGAZINE. INCLUDED FACTORY FITTED MACHINE OPTIONS  HYDRAULIC 3-JAW & MANUAL 4-JAW COMBINATION CHUCK WITH 4 MANUAL ADJUSTABLE JAW BODIES  CHIP CONVEYOR & CHIP BUCKET  TRANSFORMER – 415V, 3PH, 50HZ INCLUDED TOOLHOLDERS  SQUARE TOOLHOLDER TA12-41701-0161 4 OFF  SIDE LOCK TOOLHOLDER 40MM 1 OFF  SIDE LOCK TOOLHOLDER 50MM 3 OFF  BORING TOOLHOLDER 25MM TA12B41000-5151 2 OFF  BORING TOOLHOLDER 25MM TA12B41000-5153 2 OFF CAPACITY Maximum Turning Diameter Ø 1,600 MM Maximum Turning Height 1,400 MM Maximum Torque 17,885 NM Maximum Cutting Force 3,000 KGF Maximum Workpiece Weight 8,000 KGS TABLE Table Diameter Ø 1,250 MM Table Speed 0.9 ~ 360 RPM Table Speed Range AUTOMATIC 2 STEP RAM HEAD Tool Size 32 MM² Spindle Taper ISO 7/24 #50 Ram Cross Section 220 x 220 MM TRAVEL & FEEDRATE X-Axis Travel (Saddle Horizontal) 1,060 MM Z-Axis Travel (Ram Vertical) 900 MM Vertical Travel of Crossrail 700 MM Crossrail Rapid Traverse Feedrate 300 MM / MIN Maximum X / Z-Axis Cutting Feedrate 7,500 MM / MIN X / Z-Axis Rapid Feedrate 7,500 MM / MIN ATC Type of Tool Holder MAS BT 50 Tool Magazine Capacity 12 M0Ip8Vnjg Max. Tool Weight 50.0 KGS MOTOR Table Motor (Cont. / 30 Min) AC 37.0 / 45.0 KW X / Z-Axis Servo Motor AC 7.0 KW 3 | Page POWER SOURCE Input Power Supply 415V / 50HZ / 3PH Power Capacity 80 KVA DIMENSIONS & WEIGHT Height 5,290 MM External Width (With Chip Conveyor) 6,760 MM External Depth 4,565 MM Weight 25,800 KGS STANDARD SUPPLIED MACHINE FEATURES  FANUC 32IA CONTROL SYSTEM  THROUGH TOOL COOLANT  TABLE, SERVO DRIVES & MOTORS  THROUGH SPINDLE COOLANT  4 JAW INDEPENDENT MANUAL CHUCK  SPLASH GUARD & SAFETY GUARD RAIL  AUTOMATIC TOOL CHANGE SYSTEM  X-AXIS SLIDEWAY PROTECT STEEL COVER  LUBRICATION OIL COOLER  WORK LIGHT  HYDRAULIC POWER UNIT  PATROL LAMP (RED, YELLOW & GREEN)  AUTOMATIC GUIDEWAY LUBRICATION SYSTEM  NC POWER OFF  COOLANT SYSTEM & WASH GUN  CHIP PAN  ELECTRICAL & MECHANICAL MANUALS  LEVELLING BLOCKS

Condition: good (used), Model: Magnum 1250 Swing Over Bed: 635mm Swing Over Top Slide: 390mm Swing In Gap: 900mm x 218mm Distance Between Centres: 4000mm Spindle Speeds: 6.3 – 1250 RPM Spindle Bore: 118mm Motor: 15 KW Ilkyybx0Q Dimensions: 5920 x 1960 x 1390mm High Weight: 5090Kgs

Condition: excellent (used), Year of construction: 2014, USED HANKOOK VTC140E – YOM 2014 – Serial Number 44L09842 - TWW Cat 7962 MACHINE CONSTRUCTION & FEATURES • Ram Type Vertical Boring & Turning Machine with C-Axis & Driven Tools. • Heavy-Duty Cast-Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Hardened & Ground Slideways to Provide Increased Stability & Rigidity. • 2 Step Automatic Gear Change. • 24 Position Tool Magazine. INCLUDED FACTORY FITTED MACHINE OPTIONS • Chip Conveyor & Chip Bucket • 30 Bar Through Spindle Coolant System • Measurement System C-Axis Scale • Transformer • Hydraulic 3-Jaw & Manual 4-Jaw Combination Chuck With4 Manual Adjustable Jaw Bodies • Automatic Tool Setting Device TOOLING INCLUDED • DINE Tool-changeable Angular Milling Head with 40 ISO Output • 2 Off Sandvik Capto C6 Turning Toolholders with Two Outputs (V & H) • 1 Off Sandvik Capto C6 Axial Turning Head • 7 OFF BT50 Driven Toolholders • 1 Off Hankook TA12B4121015043 • 1 OFF Hankook TA12B412015142 • 1 Off Hankook TA12410000161 • 2 OFF Hankook TA12417010160 CAPACITY Maximum Turning Diameter - Ø 1,600 mm U0Xvepwd77 Maximum Turning Height - 1,400 mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,400 mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - Automatic 2 Step TABLE C-AXIS Minimum Index Angle - 0.001° C-Axis Cutting Feedrate - 0 ~ 1,200 Deg / Min Max. C-Axis Speed - 3.333 RPM RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220 x 220 mm MILLING SPINDLE Milling Spindle Speed - 30 ~ 3,000 RPM Max. Milling Spindle Torque - 235 Nm TRAVEL & FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,600 mm Z-Axis Travel (Ram Vertical) - 900 mm Maximum X / Z-Axis Cutting Feedrate - 7,500 mm / Min X / Z-Axis Rapid Feedrate - 7,500 mm / Min ATC Type of Tool Holder - MAS BT 50 Tool Magazine Capacity - 24 (12T & 12M) Max. Tool Weight - 50.0 KGS MOTOR Table Motor (Cont. / 30 Min) - AC 37.0 / 45.0 kW Milling Spindle Motor Power - 15.0 / 18.5 kW X / Z-Axis Servo Motor - AC 7.0 kW C-Axis Motor - 7.0 kW POWER SOURCE Input Power Supply - 415V / 50HZ / 3PH Power Capacity - 80 KVA DIMENSIONS & WEIGHT Height - 5,535 mm External Width (With Chip Conveyor) - 6,760 mm External Depth - 4,565 mm Weight - 25,800 kg STANDARD SUPPLIED MACHINE FEATURES • Fanuc 32iA Control System • Through Tool Coolant • Table, Servo Drives & Motors • Through Spindle Coolant • 4 Jaw Independent Manual Chuck • Splash Guard & Safety Guard Rail • Automatic Tool Change System • X-Axis Slideway Protect Steel Cover • Lubrication Oil Cooler • Work Light • Hydraulic Power Unit • Levelling Blocks • Patrol Lamp (Red, Yellow & Green) • Automatic Guideway Lubrication System • NC Power Off • Coolant System & Wash Gun • Chip Pan • Electrical & Mechanical Manuals

Condition: excellent (used), Sip Hydroptic 6A Jig Boring Machine Ilmulm32E Model: 6A Table Area: 1100 x 842mm Long Travel: 1000mm Spindle Travel: 950mm Spindle Traverse: 700mm Machine With: 3 Axis Digital Readout Tooling Rotary Table Dimensions: 3280 x 2335 x 3205mm high Weight: 10,000 Kgs

Condition: good (used), Year of construction: 2002, Functionality: fully functional, USED TOSHULIN POWERTURN 1600 CM 2-APC – YOM 2002 – Serial Number 1428 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Ram Type Vertical Boring & Turning Machine With C-Axis & Driven Tools • Heavy-Duty Cast-Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Hardened & Ground Slideways to Provide Increased Stability & Rigidity. • 2 Step Automatic Gear Change. • 96 Position Tool Magazine. • Recirculating Cylindrical Roller Bearing Packs and Steel Hardened and Ground Guide Way Inserts on X and Z Axes • Pallet Changer with Set Up Station, Park Station and Transfer Station and 2 Off 4 Jaw 1600mm Pallets with Manually Operated Integral Base Jaws • High Precision Pallet Location for High Repeatability • Knoll 70 Bar Coolant System With Paper Band Filtration – with Through Spindle • Swarf Conveyor • Power Rise and Fall to the Operator’s Pendant CAPACITY Maximum Turning Diameter - Ø 2,000 MM Maximum Turning Height - 1,110 MM Blc0Rlpnwsg Maximum Height Under Crossrail - 1,300 MM Maximum Torque on Pallet - 22,918 NM Maximum Workpiece Weight - 6,000 KGS TABLE Pallet Diameter - Ø 1,600 MM Table Speed - 2.5 ~ 315 RPM Table Speed Range - Automatic 2 Step TABLE C-AXIS Minimum Index Angle - 0.001° C-Axis Cutting Feedrate - 500 MM / MIN Max. C-Axis Speed - 0.01 ~ 6.2 RPM RAM HEAD Tool Size - 40 MM² Ram Cross Section - 240 x 240 MM MILLING SPINDLE Milling Spindle Speed - 4 ~ 3,000 RPM Milling Spindle Power - 22.0 KW TRAVEL & FEEDRATE X-Axis Travel (Saddle Horizontal) - 2,470 MM Z-Axis Travel (Ram Vertical) - 900 MM Vertical Travel of Crossrail - 800 MM Maximum X / Z-Axis Cutting Feedrate - 1.0 ~ 4,000 MM / MIN X / Z-Axis Rapid Feedrate - 12,000 MM / MIN ATC Type of Tool Holder - MAS BT 50 Tool Magazine Capacity - 96 STATIONS Max. Tool Weight - 50.0 KGS MOTOR Table Motor (Cont. / 30 Min) - AC 60.0 KW Milling Spindle Motor Power - AC 22.0 KW X / Z-Axis Servo Motor - AC 7.0 KW C-Axis Motor - AC 7.0 KW POWER SOURCE Input Power Supply - 415V / 50HZ / 3PH Power Capacity - 80 KVA DIMENSIONS & WEIGHT Height 5,905 - MM External Width (With Chip Conveyor) - 9,765 MM External Depth - 11,130 MM Weight - 45,000 KGS

Condition: good (used), Year of construction: 2006, Model: SLX 1630 Year: 2006 Control: ProtoTrak SLX Swing over Bed: 400mm Distance Between Centres: 760mm Spindle Bore: 54mm Spindle Speeds: 2500 RPM Machine with: Dnzqwcey8 3 – jaw chuck 4 – jaw chuck Quick Change Toolpost

Condition: good (used), Model: E33 Serial No: 21918 Capacities: Spindle Speeds: 12 – 1000rpm Spindle Feeds: 0.102 – 1.020mm/rev Spindle Taper: 5 MT Quill Traverse: 375mm Quill Diameter: 85mm Column Diameter: 370mm Cqppfq2Zh8 Spindle to Base Maximum: 1740mm Spindle to Base Minimum: 405mm Spindle Motor: Electrics: 415v, 3ph, 50 Cycles Complete With: Lovo Light Safety Brake Coolant Loose Box Table 880 x 640 x 515mm Approximate Dimensions: 2760 x 915 x 3110mm Approximate Weight: 5000kg

Condition: excellent (used), Boko Universal Boring & Milling Machine Model: F3 Table Area: 1300 x 800mm (Power Rotation) Long Travel: 1300mm Ulak2D3Ybr Cross Travel: 700mm Max Dia. For Circular Milling: 2500mm Table Rotates 360 Degrees With Feeds Spindle Taper: 50 Int Spindle Speeds: 45-2550 RPM Head Swivels 90 Degrees Both Directions Pendant Control With Digital Readout Excellent Condition

Condition: good (used), Dean Smith and Grace Type 25P Oil Country Lathe Model: Type 25P x 120 Swing over Bed: 660mm (26 ½”) Distance Between Centres: 3000mm (120”) Spindle Bore: 271mm (10 7/8”) Machine With: Double Chucks Hmx8Qk0Cc Hydraulic Copy Fixed Steady Rapid Traverse To Saddle

Condition: good (used), Hardinge GX 480 DT Drill Tap Centre Model: GX-480 DT Cvwmj2Ecye Control: FANUC Oi-MC Table Area: 600 x 400mm ‘X’ axis Travel: 480mm ‘Y’ axis Travel: 400mm ‘Z’ axis Travel: 430mm Spindle Taper: 30 INT Spindle Speeds: 15,000 RPM Tapping Speed: 6000 RPM Toolchanger: 20 station

Condition: good (used), Model: SF 125 Control: Heidenhian TNC 320 Table Size: 1800 x 1800mm Max. Table Load: 8000kgs Vertical Travel: 1800mm Cross Travel: 2000mm Long Travel: 2388mm Spindle Dia. 125mm Speed Range: 4.5 – 1120 RPM Facing Head dia.: 800mm Machine with: Bvnwgacefw Outriggers End Steady

Condition: as good as new (ex-display), Year of construction: 1987, Model: W75 S/No. 05-16 Year: 1987 Table Size: 950 x 950mm Max. Table Load: 3000 kg Spindle Taper: ISO 40 Bxhzxbfb Spindle Speeds: 18 – 1800 RPM ‘’X’ axis travel: 1250mm ‘Y’ axis travel:: 900mm ‘Z’ axis Travel: 950mm ‘W’ (spindle traverse): 560mm Machine with: Millvision Digital Readout Facing Head End Steady

Condition: good (used), Model: 40N Year: 1990 Control: Mazatrol T32-2 Swing over Bed: 540mm (21.5”) Distance between centres: 2000mm Spindle Speeds: 6-3000rpm Spindle Bore: 166mm Dia. Cuk0Dyvfuk Machine with: 15 station indexing turret 3 – jaw power chuck Tool Prestter Swarf Conveyor

Condition: good (used), Model: TMC 20 Control: Fanuc OTC Capacity: 220 x 350mm With: 200mm 3 Jaw Power Chuck Spindle Bore 50mm Cvwpdie0Jc