4
Multi Purpose Profiling Roll
Dqjgkgdey
Equipped with linear roller conveyor (Decoilercan be used)
wire thickness: 4 ..28 mm
bar length: 3000 mm
rolling speed: 12 ..20 m/min
throughput related to the end product: 1 .. 2 m/min
roller diameter 255 ..285 mm
roller width 50 mm
rolling force max. 300 kN
Dimensions 7500 x 3400 x 2300 mm
Current application: Wire and profiles for the watch and jewellery industry
1
diameter range 1,3-6 mm
shaft length under head 102 mm
Cso0ft8g
output pieces/min 1500
4
Max. speed: 30m/s, wire diameter: 0.8-1.2mm, connected load: 11kW.
Ddxi9no
8
Specification:
- dimensions: 4600×1250×2120 mm
- weight 3400 kg - motors (26 kW total)
- 2D bending - bending from two coils simultaneously (from Ø5 to Ø8 mm), from one coil (from Ø10 to Ø12 mm)
- 3D bending - bending from one coil at a time (from Ø5 to Ø12 mm)
- maximum bending angle 180 degrees (2D and 3D)
- maximum workpiece length up to 2300 mm
- minimum workpiece length 100 mm
- Maximum material speed up to 110 m/min
- Maximum bending speed up to 1050 degrees/second
- Bi-directional bending...
14
Ultrasonic and electrolyte cleaning,
wire cleaning line, wire cleaning plant, wire treatment plant
Manufacturer: Sirio-Wire
Vtp7q3
Type: M0209
Number of wires / cores: 12 (6+6)
Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying.
Year of construction: 2006
The plant was only in operation for about three years, then the production was moved to another location.
Process: Ultrasonic and electolytic cleaning in a hot bath....
12
Laser-marking cabinet with automatic door and motorized Z axis.
- Safety cabinet designed for fiber laser
- Motorized Z axis for marking multiple product heights (also within one product)
- Easy programming via LCD touch screen
- Automatic pneumatic door for convenient and fast production- safety light curtain
- Laser Window - for operators' protection
- Gooseneck fume extractor port
7w8eqrk0
Cabinet is equipped with laser with the 242x242 mm lens. Marking area is adjustable upon each applicat...
EQUIPMENT :
• Vertical, double pay-off unit with hydraulic unit and control touch panel
• Mechanical descaler
• Vertical and horizontal straightener
• Wire cleaning unit; motorized brushes (Ernst Koch GmbH & Co. KG, Germany)
• Rolling cassette
• Flat rolling stands (four units)
1. Roll stand; ROLLS KÄMPFER WÜRZ 2x300 mm, SIEMENS AC DRIVES 2X55kW, WICHMANN CARDAN SHAFTS
2. Roll stand; ROLLS KÄMPFER WÜRZ 2x300 mm, SIEMENS AC DRIVES 2X55kW, WICHMANN CARDAN SHAFTS
3. Roll stand; ROLLS KÄMPFER W...
1
annealing temperature 0-500 °C
Bivv2tlx2f
speed - meter/min 5-60
3
Including documentation and tools.
Prgr2
4
Specification:
- dimensions: 3800×1600×1970 mm
- weight 1300 kg
- bending from two coils simultaneously (from Ø5 to Ø8 mm), from one coil (Ø10)
- possibility to bend smooth and ribbed rods,
- maximum bending angle 160 degrees
- maximum length of the workpiece 1300 mm
- minimum workpiece length 100 mm
- Maximum material speed up to 75 m/min
- energy consumption 4 kW/h
- possibility to program different bending details
- control via colour touch screen
- integrated safety STOP button
- the device ...
3
Technical Details :
Products -
- Flats - 10x3 - 25x3 mm
10x4 - 25x4 mm
12x5 - 20x5 mm
- Square - 6x6 - 12x12 mm
- (T) Profile - 20x10x3 mm
- ( L) Profile - 15x15x3 - 18x18x3 mm
Raw Material wire - 8,9,10,11,12,13,14,16 mm
Transformer Power - 20 Kw
Speed - 35m/min
Mullww
15
Manufacturer: made in EU
Model: Hot Rolling Mill
Year: 1986.
Main Technical Details:
130mm income billet size
Billet length 6-15m
10t o 40 mm bar and sections rolled product
Finishing rolling speed for 10mm bar13,5 m/sec
Cooling bed length 105mm
Electricity consumption : 900-1500 MVA according to production
450.000 ton/year capacity
Components:
reheating furnace
8 horizontal roughing stands ; continuous
7 horizontal plus one vertical stands intermediate train
2 horizontal and 2 vertic...
8
MasterBend is automatic stirrup bender machine, designed to produce stirrups from coil according to the different production requirements in a fully automatic way. Because of its ease of use and flexibility MasterBend is an ideal solution in the field of automatic benders from coils.
~ Double wire: Increase you production capacity when you work with two wire.
~ Driven by servo motors: Controlled by newest servo technology.
~ "Mash-Soft" software: "Mash-Soft" provides the user friendly system fo...
1
There are two identical machines available, wire diameter: 0.2-1mm, max. spring diameter: 10mm, leg length: 50mm, windings: 0-70, capacity: 8-83 pieces/min.
7ebj72r7e
3
MANUFACTURES METALLIC WOOL (FIBERS), THE MACHINE HAS A MILL THAT FROM THIS FIBER MANUFACTURES POWDER FOR AUTOMOTIVE BRAKE LININGS.
Buswx8jv9w
7
Underground heat treatment furnaces (annealing and tempering )
Tech. Details :
-Max. Temperature - 1200 C
-Heating medium: gas
-Equipment description: underground heat treatment
furnaces which consisting of oven and pots
-Number of oven: 5 pieces
Beap3szoum
-Number of pots: 8pieces
-Pots volume: 1600 l
-Pots dimensions: Ø1600 x 2100 mm
-Oven dimensions: Ø2500 x 2360 mm
-Electrical cabinet
-Centrifugal fan 5 pieces
15
DANIELI HOT ROLLING MILL
Hot Rolling mill - Rebar production plant
We have for sale COMPLETE Danieli / Pomini hot rolling mill.
Refurbished in 2015.
Entry billet dim.: 120, 130 & 140 mm square, Length: 8 m
Rebar dimensions: dia. 8 – 32 mm, Length: 6 – 14 m
Capacity: 1200 – 1400 ton on 3 shifts
Plant consist of:
1. Re-heating furnace
2. Roughing mill
3. Flying shear
4. Intermmediate mill
5. Finishing mill
6. Finished Monobloc
7. Shears
8. Winding lines
9. Water treatment un...
for nail presses
Bvxghrpdfe
number of grinding wheels 3 + 3 + 1
3
The plant consists of the following parts: (1) Drawing machine Herborn 01/180 L8, final drawing disc diameter: 285mm, drive power: 11kW, 10 wire draws, diameter entry->final: 3.5->0.5mm (terne metal). (2) Pre-drawing block Niehoff 25 NM 869, with 3-fold drawing disc. (3) Horizontal winding machine Klemm und Fischer SPF, built 1997.
7easmovov
7
MAKSES ENG./ENBOMAK POWDER COATING LINE
Bljf907jzl
New in 2015.
Ideal for wire fence (3D), racks, grids, posts
Continuous conveyor loop system
205Mts in length
(5) spray washing cabins/units, 5x15KW independent pumps
up to 5 different chemicals/water can be used
15Mts drying cabin, infrared – to prepare product for coating
(2) powder coating paint cabins with 12 robotic paint guns for each; Mfg Enbomak
Normally one paint cabin for green powder coating; (1) for powder coating,
(1) for 2...
2
Including winding plate, tracks, tools and feed rollers.
Ekevocp
1
for nail presses
number of grinding wheels 3 + 1
Bo02jnm8gd
1
Wire diameter: 0,5-2mm, leg length: approx. 80x120mm, coiling mandrel diameter: 20mm, coiling spindle path: 90mm, capacity: approx. 70springs/min. There are two machines for sale.
Yulxvwv
1
for nail presses
Gwxbcg
number of grinding wheels 2 + 3
2
Diameter: 4mm max., shaft length: 40mm max., output: 130-310pieces/min, wire section: 50mm max.
Bdz8qxibb2
2
Diameter: 5mm max., shaft length: 51mm, wire section: 69mm, performance: 200pieces/min.
Iq00yhdn0
2
Diameter: 12mm max., shaft length: 440mm, wire section: 465mm, performance: 30-40pieces/min.
K37r0zzz
1
Diameter: 4mm, shaft length: 20mm, wire section: 35mm, performance: 430pieces/min.
Ekdirrx
1
Wire thickness round/ square wire: 0.2-1.5/ 0.2-1.2mm, outer spring diameter: 1.0-30mm, max. output: 250 springs/min.
7ebjukmjd
2
For the packing of coils.
Bejl2aszbf
1
SWire strength: 0.5-2mm, max. output: 70 springs/min, max. winding spindle stroke: 90mm, leg length: 80x120mm, length: 1300mm, width: 3000mm, weight: 1.7t.
Cryeuou0k
2
Inlet/ outlet wire diameter: 2.4-6/ 1.2-3mm, working speed: 6m/s, number of pulls: 1+5, motor power: 5x22kW.
Biwhr2fzgr
1
There are two identical Wire Drawing Machines HEINRICH 350-2 available, inlet/ outlet wire diameter: 3/ 0,15-0,6mm, working speed: 30m/s, number of pulls: 21, motor power: 15kW.
Biwhrrutsq
1
Inlet/ outlet wire diameter: 3/ 0.15-0.6mm, working speed: 30m/s, number of pulls: 21, motor power: 25kW.
Bjqf99ssjb
1
Wire diameter: 1-3.2mm, spring diameter: 9-28mm, spring length: 25-150mm, capactiy: 8-25springs/min, with winder Wafios FUD 41, eyeletting machine Wafios FOS 3.
Yucgqcu
1
Inlet/ outlet wire diameter: 3/ 0.15-0.6mm, working speed: 30m/s, number of pulls: 21, motor power: 22kW.
Febczmmva
4
Including tools, controls and instruction manual.
Dw3eqpw8s
3
Inlet/ outlet wire diameter: 5.5/ 3mm, inlet/ outlet wire strength: 450/ 550-760N/mm, drawing speed: 5.7m/s, with winder, pay-off, sling inspection, Wire Coating GSG and additional accessories.
Bsqz2r822o
1
Including tracks, tools, feed rollers and instruction manual.
Brgcg2c7gm
3
Wire diameter: 6-12mm, max. wire strength: 800N/mm², wire feed: 29-117m/min, power: 30kW, weight: 3,6t.
Qc9lqlo9
1
Inlet/ outlet wire diameter: 2.2/ 0.15-0.5mm, working speed: 50m/s, number of pulls: 21, motor power: 22kW.
Bjqgajdx7c
3
Max. coil weight: 10t, controls: SIEMENS S5, without documentation.
Bvdkh0yc2d
2
Max. speed: 360m/min, power: 5.6kW.
Cis2wp2
2
Electrode force: 660N, working stroke: 40mm, connected load: 62.4kVA, documentation and spare parts available.
Pvleee
3
Wire diameter: 3-8mm, max. wire strength: 800N/mm², wire feed: 90-120m/min, power: 18.5kW, weight: 2.7t.
Fbtqjim0w
2
Max. wire inlet diameter at 400-450 N/mm²: 1mm, wire outlet diameter at 1200N/mm²: 0.08-0.16mm, max. speed: 30m/s, controls: SIEMENS KTP 700.
Bsa9kcoo9y
3
Wire diameter: 3-8mm, max. wire strength: 800N/mm², wire feed: 90-120m/min, power: 18.5kW, weight: 2.7t.
2svws3
3
Wire diameter: 3-8mm, max. wire strength: 800N/mm², wire feed: 90-120m/min, power: 18.5kW, weight: 2.7t.
Bsqzvjwfwz
Used Other machinery
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Olympic Games: Machineseeker sponsors Team Germany
Machineseeker still biggest sponsors of 2nd German football league
10 valuable tricks for buying used machines online
How to receive 100% of our e-mails
Sample sales contract for used machines in nine languages
Morlock Motors official partner of Machineseeker and Truckscout24
