Used Accessories for sale (18,247)

Condition: good (used), 100.000L steel tank. Fire / drinking water underground or above-ground Dimensions 16.9 x 3.10m wall thickness: 5mm weight 8mm approx. 12t, weight 5mm approx. 9t. The tanks are sandblasted by us, equipped and then painted internally and externally with a corrosion-resistant epoxy resin coating. As standard, the tank has a suction pipe with a suction basket, a breathing chimney, a supply and drain connector, a ladder and a hatch. For an additional fee, we install a float valve and a manhole chimney Nedpfxjdbllzj Agnsku We can weld additional accessories, e.g. a platform. We have tanks with and without beds. Steel beds for PLN 1800€ net. The tanks have a tightness certificate and a declaration of conformity. We offer delivery to the customer.

Condition: new, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: kg Year of manufacture: Operating hours: Lifting height: mm Overall height: mm Mast type: Nodpfxjyk Dz Es Agnsku Free lift: mm MACHINE DETAILS Drive type: Design type: Battery: EQUIPMENT Complete retrofit kit: front window + windscreen wiper + mounting materials New and unused Fits standard Linde 386, E16, E18, E20 models (not for special height or EX protected) Loading onto pallet truck is no problem Delivery via freight forwarding available on request.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS No further information available. MACHINE DETAILS No further information available. EQUIPMENT Complete retrofit kit for rear window Wiper Mounting material Nksdpfx Ajyk Dr Rognou

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Nedeyl T U Djpfx Agneku Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Condition: ready for operation (used), Hole Punch Nkjdpfx Agjir A Hasneu Centre cut Slim line stitching heads

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 22,000 kg, empty load weight: 3,165 kg, construction width: 6,000 mm, Accessories Load center: 750 Njdou Dz R Depfx Agnsku Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Description: 2x forks: 250 x 80 x 2 400 mm

Condition: used, functionality: fully functional, Year of construction: 2014, empty load weight: 512 kg, total length: 4,020 mm, fork length: 1,200 mm, load capacity: 3,485 kg, Accessories Load center: 600 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Nsdewikayjpfx Agnsku Description: 2x forks: 150 x 50 x 1,200 mm 2x forks: 150 x 50 x 1,200 mm

Condition: used, functionality: fully functional, Year of construction: 2006, load capacity: 45,000 kg, empty load weight: 4,200 kg, total length: 10,000 mm, Accessories Mast type: None Condition: Ready for use and fully functional Nodju Dzv Hopfx Agneku Technical condition: very good Description: In addition to this --make-- model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail on this --make type-- P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 3,300 kg, empty load weight: 795 kg, Accessories Load center: 600 Mast type: None Nsdpfx Asu Dzrhegnoku Condition: Ready for use and fully functional Technical condition: Very good Description: In addition to this Luck model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this LASTSTABILISATOR , The Load Stabiliser P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, Year of construction: 2006, empty load weight: 2,090 kg, construction width: 1,500 mm, Accessories Nodpfsu Dzm Eox Agnjku Mast type: None Condition: Ready for use and fully functional Technical condition: very good Description: Cross-section: approx. 800 mm - 2 400 mm

Condition: used, functionality: fully functional, load capacity: 12,000 kg, Accessories Nodou Dzg Eepfx Agnoku Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Description: Length: 1450 mm Diameter: 250 mm

Condition: used, functionality: fully functional, load capacity: 10,000 kg, empty load weight: 1,250 kg, Accessories Load center: 600 Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Description: Length: 2800 mm Diameter: 270 mm Nkedpfou Dzbvox Agnju

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 3,500 kg, fork length: 1,400 mm, empty load weight: 980 kg, total length: 6,000 mm, Accessories Load center: 700 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: None Nsdpfx Agou Dy I Isneku Condition: Ready for use and fully functional Technical condition: Very good Description: Length 6000 mm, 2 forks 150 x 60 x 1400 mm

Year of construction: 2021, operating hours: 100 h, condition: excellent (used), functionality: fully functional, Drilling and coring equipment (originally for a Fraste Multidrill but adaptable to other machines). Avegar 140mm (HEX41), Bulldog chisel 152mm (HEX41, hammer head, cardan, split spoon casing, ... Some of this equipment is new. The rest has seen very little use. Some measurements are shown in the photos. Please do not hesitate to contact the seller for further measurements or to arrange a viewing. Price negotiable. Nkodpfx Agsyidu Tjneu

Condition: used, dimensions 410 x 410 x 860 m Base unit for a Müller swing-arm grinding machine with electrical cabinet. Inside are motor protection switches, fuses, 16 A sockets, etc. The electrical Njdpfx Agoxxbzqoneku components are shown in photo no. 2. The grinding machine was sold without the base unit at the buyer's request. Thebase dimensions are 300 x 300 mm. With modifications, the base unit can be used for any similarly sized machine.

Condition: excellent (used), dimensions of the machine ca. 380 x 200 x 134 mm weight of the machine ca. 24 kg baseplate-clamping range 110 x 70 mm workpiece sizes max. 56 x 70 x 25 mm profile depth max. 15 mm Njdju Twcfjpfx Agnsku angular adjustment 0-2 ° Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of a grinding machine for grinding pieces with angle. Detailed describtion see attached PDF. doc. Machine dealer with own stock of 1600 m².

Condition: used, Price for one piece! Nedpfexwp E Ijx Agnoku

Condition: used, functionality: fully functional, Year of construction: 2011, empty load weight: 900 kg, total length: 6,000 mm, fork length: 1,500 mm, load capacity: 5,000 kg, Accessories Load center: 900 Fork width: 200 mm Fork thickness: 50 mm Nkodjyi Iflopfx Agneu Mast type: None Condition: Ready for operation and fully functional Technical condition: normal Description: Length: 6000 mm; Forks: 200x50x1500, 2 hydraulic folding forks; 2 forks with hydraulic opening/closing Length: 6000 mm; Forks: 200x50x1500, 2 hydraulic folding forks; 2 forks with hydraulic open/close

Condition: excellent (used), Offer consisting of: As-new Renz punching machine DTP 340M base unit including various tools, 1x 2:1 5.5 x 3.5mm; 1x 3:1 4 x 4mm; 1x US pitch 8x3mm, 1x WBS 340, 1x PBS 340. Njdpfsykmydjx Agnsku

Year of construction: 2010, condition: like new (used), We have the following accessories for Weiler E30 lathe. 1.piece .faceplate Schunk 250mm price:600,-€ Spindle head DIN 55027 size 5 2.pieces.faceplate Röhm 260mm price each 1.piece:650,-€ spindle head DIN 55027 size 5 1.piece.travelling steady rest Price: 450,-€ 2.pieces.driving flange Price per. 1 piece: 210,-€ Spindle head DIN 55027 size 5 Nkjdpfx Agogabvnjnou All parts are in very good condition.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, working width: 1,000 mm, machine/vehicle number: XB005M A551335-01, Near-infrared device Tomra Polysort 1000 in very good condition, operated only with dry material. Includes acceleration belt and expansion hood with separation head. Nkjdoymlqmjpfx Agnju

Condition: used, Width: 1,550 mm Height: 1,100 mm Length: 1,150 mm Protective cover / lid / flap for a planer machine Weinig type Unimat 23 SP or similar. Nksdpfx Ajwuub Segnju

Condition: used, Clamping length: 310 mm Spindle: 40 & 50 mm Tool diameter range: 80 – 300 mm Nedpfxewcn Hqo Agnjku Weinig precision setting gauge for adjusting planer heads.

Condition: new, Diameter: 150 mm Manufacturer No.: 920 072 005 Grit: D 126 900819 Grinding wheel for Weinig Rondamat or similar sharpening machines. Nodpsvl Hy Aefx Agnoku

Condition: like new (used), Width: approx. 210 mm Passage height: approx. 85 mm Height: approx. 160 mm Length: approx. 435 mm Hole spacing: 120 mm Nkjdpfst T Hk Tox Agnsu