Used crushing units for sale (123)

Condition: new, Klanke Supercut roll splitter for efficient shredding of reject rolls. Klodpfx Aen I Rgpog Uol Features: -Automatic safety lock -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 3000mm Cutting channel opening: 1200mm Motor power: 15kW Cutting force: 50to Order goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: new, Klanke roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Blade protection -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 1500mm Cutting channel opening: 1200mm Motor power: 7,5kW Cutting force: 30to Kjdpfx Ajn Hyxljg Ujll Ordered goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: new, - Motor power 9kW - PLC-based control, two-hand safety circuit Klsdpfx Aetvm A Tjg Uel - Cutting force 35to - Splitting table straight design - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm Bednmofn0d - Machine weight approx. 4 tons - Hand guard in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Ordered goods Price and further information on request

Condition: new, - Motor power 9 kW - PLC-based control, two-hand safety switch - Cutting force 35 tons - Straight splitter table - Cutting channel: - Max. blade length L = 2000 mm - Max. opening H = 1200 mm Ksdpfx Aegl Ac Sog Uell - Machine weight approx. 4 tons - Color RAL 5012 - light blue - Hand guards near the control panel and opposite - Forklift access shoes included (for easy transport of the machine by forklift) Machine in stock, available immediately Price and further information upon request

Condition: used, Year of construction: 2006, Plastic Cutting Mill – Sales Offer High-performance industrial cutting mill designed for shredding plastics and plastic films. Front feeding system combined with a hinged feed hopper ensures comfortable and safe operation. A heavy-duty rotor with a precision knife system and screen provides efficient and uniform cutting. Ideal for recycling and production lines. Technical specifications: Motor power: 35 kW Throughput: up to 600 kg/h Kedpfx Agjx Ityms Ujll Rotor diameter: 420 mm Rotor speed: 430 rpm Feed opening: 915 × 502 mm Max. input film width: 915 mm Rotary knives: 3 + 3 Fixed knives: 2 + 2 Screen hole diameter: 8 mm Drive system: 5 V-belts Material feeding: front feeding Feed hopper: hinged, manual tilt control Total machine weight: 1900 kg Robust design, high efficiency, ready for industrial operation.

Condition: new, Year of construction: 2025, functionality: fully functional, color: other, Equipment: cabin, hydraulics, CONSTMACH JS-1 mobile jaw and impact crusher is a high-efficiency mobile crushing and screening plant designed for processing natural stones such as medium-hard limestone, dolomite, and river stone. The JS-1 is manufactured with advanced engineering expertise and offers maximum efficiency even in challenging site conditions thanks to its durable components, high-performance crushers, and compact design. The system's first chassis features a CJC-60 primary jaw crusher, a vibrating feed hopper, a bypass belt, and a wheeled mobile chassis with hydraulic legs. The second chassis houses a CSI 1210 secondary impact crusher, a three-deck vibrating screen, a return belt, foldable stockpile belts, and a dust suppression system. Thanks to the powerful impact crusher design of the JS-1, the final products have an excellent cubic shape, providing ideal aggregate quality, especially for concrete production. The plant's production capacity varies between 60 and 80 tons per hour, depending on the hardness of the rock. Thanks to its user-friendly automation system, SIEMENS – SCHNEIDER brand components, and PLC control, the plant can be fully automatically managed via a tablet. Installation is completed in a short time, and the need for external equipment is minimized thanks to hydraulic opening mechanisms. The JS-1 can be easily transported with a single tractor due to its dimensions suitable for international road transport. JS-1 - Mobile Jaw and Impact Crusher Technical Specifications Production Capacity: 60-80 tph Maximum Feed Size: 600 x 380 mm Feed Height: 4.5 meters Main Configuration: Jaw Crusher + Secondary Impact Crusher + Vibrating Screen Total Motor Power: 275 kW Electric Generator Requirement: 550 kVA Plant Weight: 60 tons (total of two chassis) Plant Dimensions: 1st chassis 11x3x4.4 m / 2nd chassis 3.35x4.3x17.8 m Chassis Type: Double Chassis Why Choose the JS-1 Mobile Crushing and Screening Plant? CONSTMACH JS-1 is an excellent choice for professionals seeking maximum efficiency, minimum operating costs, and superior product quality in the rock crushing process. Its fully automatic control system, high mobility capability, and durable construction offer uninterrupted production for many years. Furthermore, CONSTMACH's engineering expertise, after-sales technical support, and spare parts supply guarantee ensure the continuity of your business. If you are looking for quality, performance, and reliability in stone crushing solutions, experience the difference with the JS-1 Mobile Jaw and Impact Crusher, backed by CONSTMACH quality. What Do We Do at Constmach? Klsdoxqg Elopfx Ag Ujl Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Shredder, Erdwich M700/1-600, used machine Klsdpfox I Dmwex Ag Ujl Manufacturer: Erdwich Type: M700/1-600 Year: 2013 Power: 2 × 22 kW Overall dimensions: 1750 × 1820 × 1810 mm Weight: approx. 3,500 kg Hopper size: 650 × 580 mm × 2

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, Panizzolo PZ 2H 1000 – Hydraulic Twin-Shaft Shredder | Ready for Operation Panizzolo PZ 2H 1000 hydraulic shredding unit offered for sale. Machine designed for heavy-duty metal and industrial waste processing. Technical specifications: Twin cutting shafts, working length: 1000 mm Hydraulic drive system – high torque and stable performance under heavy load Cutting chamber approx. 1000 × 700 mm Replaceable alloy steel knives, suitable for metals and industrial waste Robust steel construction, designed for continuous operation in recycling plants Additional advantages: Klsdpfsxlgrhox Ag Uol Machine in good technical condition Available immediately Possible inspection or video presentation Support with loading and export logistics (EU / non-EU) Machine located in Poland. Serious inquiries only.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We invite you to visit our technical center to experience the quality and functionality for yourself. Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idle - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally with control cabinet extension for discharge conveyor belt and overband magnetic separator Complete solution with discharge conveyor belt in any configuration. Our core competence lies in delivering exactly what the customer truly needs. Klodjv Tdq Iopfx Ag Ujl We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems All prices are net prices plus 19% VAT All information provided without guarantee, while stocks last!

Condition: new, Year of construction: 2025, functionality: fully functional, rotor diameter: 360 mm, power: 45 kW (61.18 HP), Material shredder 45KW Hopper opening: 1,030 x 1,235mm Rotor diameter 360mm Star-delta start, automatic stop at idle speed - Hydraulic pusher equipped with pressure plates - Siemens SPS control system - Optional with control cabinet extension for discharge conveyor + overbelt magnetic separator Complete solution with discharge conveyor belt in any design. Our core competence lies in supplying the customer with exactly what he really needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application. conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grid, magnetic grate, metal separator, block magnet, filter systems Kedpfxst Rivto Ag Uell

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net A machine is currently available immediately. The ideal machine for shredding voluminous, light aluminum chips or turnings. Not suitable for more solid aluminum parts. Includes: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blade: 40x40mm, multi-rotatable, Kljdpfx Agegmh H Tj Usl Rotor diameter: 260 mm, Control: Omron PLC, Cutter opening 600 x 800 mm, Funnel volume approx. 0.6 qbm, Hydraulically operated slider Sieve perforation of your choice (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available for an additional charge: - Raise the shredder by 30 cm (preparation for conveyor belt) +2,990 € net - Angle conveyor belt (discharge height approx. 220 cm) +9,770 € net - Overband magnet + €6,980 net - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the chipper) We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Klsdpfx Agov Sqrpe Usl Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2024, Consisting of large bale breaker Type MHB and straw shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – regulates the speed of the chain conveyor. The bales are placed on the chain conveyor, and the milling advance is activated. The milling tines tear the straw from the bale and hurl it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here. Technical data – Bale Breaker: Performance: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill and kW rating of the straw mill). Without straw mill, the bale breaker can process up to max. 900 kg/h straw. Max. square bale size: 2400 x 1200 x 800 mm (L x W x H) Milling motor: 5.5 kW, 380 Volt Chain conveyor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for even larger straw shredder (18.5 kW): + €3,940 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts; selectable perforations (10, 12, 15, 22, 30, 45 mm) With star-delta switch, phase protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras for a surcharge: Feed auger: + €970 net Cyclone (suspension by customer on site; should be no more than 10 m away): + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstrator): + from €9,950 net Optional rotary valve (renders material pressureless): + €5,750 net Control panel: from €1,620 net Special breaker extension 3 m (other sizes on request): + €9,750 net Briquetting press MPP 180 S; little used demonstrator 70 mm briquette – up to max. 100 kg/h from €39,700 net * Larger machines available on request Ksdob Nulhepfx Ag Uell --- Description: muetek bale breakers are designed for breaking up round and square bales of hay and straw. The shredder flanged to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build quality. muetek MHB series bale breakers feature a chain conveyor onto which the straw bale can be placed using a front loader. The support surface is adjustable depending on bale type. The chain conveyor pushes the bale against the milling rotor. The feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The separated straw is discharged. --- The machines are generally suitable for dry input material: - Straw - Hay --- Breaking up hemp bales is possible only with a special breaker (surcharge approx. €9,720 net, depending on configuration). Straw mill is not suitable for hemp processing. Requirements for input material: Max. moisture content 12%

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials Throughput depends heavily on the sieve and source material: - up to 60 kg / h for EPS with a 15 mm sieve *the coarser the sieve, the higher the throughput Motor 9.2 / 11 KW - 400 volts, stable steel construction, hardened cutting blades, sieve with interchangeable inserts, Ksdpfoh S H T Uex Ag Usll optionally (8), (10), 15, 22, 26, 30, 40, or 60 mm perforation with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, blow-out nozzle 150 mm, optionally for plastic or grain pipes, blow width approx. 12 m, chassis with 2 running wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all Wheels with solid rubber tires, Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net 1 sieve €475 each net Lid €290 each net

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net Kledpjdv Eu Hsfx Ag Uol (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide variety of materials such as all types of wood residues, softwood, chipboard and MDF, pallets, construction timber, demolition wood, carpets, cables, paper, cardboard, and plastics. The machine is characterized by its robust design, ensuring consistent quality in continuous operation. We are pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight and we will document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase Knives: multiple reversible Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Hopper (mm): 510 x 810 mm Hopper volume approx. 0.4 m³ Throughput: 1 - 5 hopper fillings/hour Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,000 kg Dimensions approx. 1550 x 1100 x 1640 mm Moisture content of raw material: must be below 30% a.d. Standard features included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start • Automatic shut-off in case of rotor idle • Removable extraction channel • Speed 70 - 100 rpm for higher throughput • Cycle control to prevent idle time • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Kjdpfjd Db N Iox Ag Uoll Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) Requirements for input/raw material: - Moisture content (a.d.) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months Kljdpfx Ajd Dgw Ueg Ujl MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Klodpfx Aox Hyfyog Uol Engine power: 11 kW

Condition: used, Year of construction: 2000, Granulator / Knife Mill Manufacturer: Tria (Italy) Type: 80/45 Main motor: 55 kW Rotor length: 800 mm Rotor diameter: 490 mm + Blower + Big-bag station with cyclone Ksdsx Ext Topfx Ag Uell

Condition: good (used), 📄 Technical Data: Kubria F/M 90/S Feature / Parameter Value / Information Application Area Secondary and tertiary crushing of hard rocks (e.g. granite, basalt, gneiss), ore, limestone, cement raw materials, etc. Kedpfjxzk Urox Ag Ujll Crushing Concept Cone crusher: material is crushed by compression between a fixed crushing ring and a rotating crushing cone. Cone Diameter (bottom cone / mantle) 900 mm Maximum Feed Piece Size up to 150 mm edge length Closed Side Setting (CSS) 8 – 35 mm Feed Opening (max.) max. 180 mm (feed opening “f”) Final Product / Grain Sizes (depending on configuration) e.g. 0–16 mm, 0–22 mm, 0–32 mm Throughput Capacity (depending on configuration / material / setting) up to approx. 90 t/h (fine), up to approx. 110 t/h (medium), up to approx. 140 t/h (coarse / with larger screen or setting range) Main Dimensions (L × W × H) 1,960 mm × 1,550 mm × 2,460 mm Total Weight (without drive, electrics, hydraulics, control system) approximately 10 t Drive V-belt drive

Condition: excellent (used), For sale: Retsch BB300 Jaw Crusher (Manganese) The machine is fully operational and in EXCELLENT technical and visual condition – only occasionally used. Application: Crushing of medium-hard, hard, and tough materials with hardness up to 10 on the Mohs scale. Ksdpoxckcrjfx Ag Uoll - Gap width (mm): 1-40 - Feed grain size (mm): < 150 - Final grain size (mm): 5-40 - Sample volume/capacity: up to 600 kg/h - Motor power (kW): 3.0 - Crushing jaws made of manganese steel

Condition: used, Year of construction: 2018, Single Shaft Shredder Weima Klsdpfx Agsx A Uk Hj Ujl Model: WLK2000 Main Motor: 110kW Rotor Diameter: 370mm Rotor Length: 2000mm Weight approx.: 9000kg Rotor knives size: 40x40x23mm

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH SW series mobile sand washing and screening plants deliver maximum performance in the field with high efficiency and flexible usage capabilities. Used for washing, screening, and classifying natural sand and gravel, these plants can be easily positioned even in confined spaces thanks to their compact design. Having all equipment assembled on a single mobile chassis significantly reduces setup time and makes transportation extremely practical. These plants, which can be quickly moved from site to site, provide businesses with significant savings in both time and money. SW-1240 Production Capacity: 60 t/h Screen Dimensions: 1,200 x 4,000 mm Helical Washer Dimensions: 400 x 4,000 mm Feed Height: 4,600 mm Total Motor Power: 37 kW Electric Generator Requirement: 75 kVA Weight: 20,000 kg Transport Dimensions: 15(L) x 2.8(W) x 4.2(H) m SW-1640 Production Capacity: 80 t/h Screen Dimensions: 1,600 x 4,000 mm Helical Washer Dimensions: 500 x 5,000 mm Feed Height: 4,650 mm Total Motor Power: 41 kW Electric Generator Requirement: 85 kVA Weight: 24,000 kg Transport Dimensions: 15.5(L) x 3.25(W) x 4.3(H) m SW-1850 Production Capacity: 150 t/h Screen Dimensions: 1,800 x 5,000 mm Helical Washer Dimensions: 600 x 6,000 mm Feed Height: 4,700 mm Total Motor Power: 50 kW Electric Generator Requirement: 100 kVA Weight: 32,000 kg Transport Dimensions: 16(L) x 3.65(W) x 4.4(H) m SW-2060 Production Capacity: 200 t/h Screen Dimensions: 2,000 x 6,000 mm Helical Washer Dimensions: 700 x 7,000 mm Feed Height: 4,750 mm Total Motor Power: 55 kW Electric Generator Requirement: 120 kVA Weight: 37,000 kg Kodpjxqgy Njfx Ag Uoll Transport Dimensions: 17(L) x 3.85(W) x 4.5(H) m Why Choose CONSTMACH Mobile Sand Washing and Screening Plant? CONSTMACH combines quality, durability, and user-friendly design in its mobile sand washing and screening plants. Manufactured to European standards, our machines exceed industry expectations with their high washing capacity and low maintenance costs. Every plant we produce, backed by years of engineering experience, aims to ensure uninterrupted efficiency in our customers' production processes. Offering portability, quick installation, and high performance, these plants give you maximum flexibility at every stage of your projects. Choose the CONSTMACH brand for quality production, technical support, and reliable service. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2025, The 3E Machinery tire recycling system is a state-of-the-art, modular industrial line engineered for the efficient processing of used passenger, truck, and industrial tires into clean fractions such as rubber granules, steel, and textile fibers. This installation provides high throughput, low energy consumption, and full compliance with environmental protection standards. Comprehensive Tire Processing Technology • The system comprises several processing stages that guarantee complete material downsizing and separation: • Pre-cutting and primary shredding of whole tires • Multi-stage size reduction with dual-shaft and four-shaft shredders • Granulation and fine milling of rubber • Magnetic separation of steel • Air and cyclone separation of textile fibers • Final purification and classification of rubber granulate This process enables the production of high-quality rubber granules in various sizes (from 30 mm down to 1–4 mm), as well as clean steel suitable for recycling. System Throughput and Application Range • Throughput: from 500 kg/h to over 10,000 kg/h • Material types: passenger car tires, truck tires, industrial tires, solid tires, bead-reinforced tires • Final output products: o rubber granules (30 mm, 10 mm, 1–4 mm) o rubber powder o steel Kljdpfx Aex Aidbog Usl o textile fibers • Optional low-noise and low-dust engineering packages available The layout can be customized to match the client's required capacity and available plant space. Why partner with our company – Official European Representative of 3E Machinery • Competitive pricing without intermediary markups. We offer equipment directly from the factory in China, without additional distributor or agent margins, ensuring highly competitive pricing while maintaining full manufacturer quality. • Comprehensive technical and commercial support. Based on client specifications, we select the appropriate line configuration, define process parameters, capacity, and technology scope—ensuring a perfect match for each project. • Full assistance throughout the entire procurement cycle. We support customers from the initial inquiry, through technical discussions, payment terms, and to the conclusion of the final agreement with the manufacturer. • Logistics and transportation support. We assist with organizing international transport, customs clearance, and required documentation so delivery proceeds smoothly and without complications. • Extensive experience in the recycling industry. As a long-standing European representative of 3E Machinery, we provide practical know-how and market expertise that greatly simplifies the purchasing process.

Condition: new, Year of construction: 2025, The 3E Machinery lithium battery recycling system is an advanced, fully integrated technological solution designed for the safe, efficient, and environmentally responsible processing of spent lithium batteries and electrode materials. The line combines state-of-the-art crushing, separation, thermal treatment, and industrial automation technologies, enabling the recovery of valuable raw materials while maintaining the highest safety standards. Comprehensive Resource Recovery Technology The recycling process utilizes a series of physical and thermal operations, including: • Multi-stage crushing • Gravity and air separation • Precision screening • Drying and low-temperature pyrolysis • Exhaust gas purification • Central dust removal and fully sealed material conveying Depending on the selected process configuration, the system enables the recovery of key fractions such as copper, aluminum, separator film, black mass, electrolyte, and additional components. Key System Features 1. Safe and Controlled Crushing • Specialized, patented shredders and crushers specifically designed for lithium batteries • Capable of processing charged batteries thanks to gas protection technology and multi-level fire prevention systems • Three-stage crushing process ensures optimum material liberation 2. High-Efficiency Material Separation • Air separation system with up to 99% efficiency for separating light and heavy fractions • Combined static and dynamic screening for optimal recovery of black mass • Precise gravity separation of copper and aluminum granules 3. Thermal Processing – Drying and Pyrolysis • Drying at 100–150°C with the possibility of recovering condensed electrolyte; separator films remain intact for further processing • Low-temperature pyrolysis at 450–600°C effectively removes organic matter and improves the quality of recovered black mass • Advanced exhaust treatment system utilizing catalytic oxidation, alkaline scrubbing, and activated carbon filtration to meet emission standards 4. Full Automation and Operational Safety • Central control system based on Siemens PLC, compatible with MODBUS TCP/IP, PROFINET, and OPC • Modular design ensures flexibility, easy maintenance, and scalable system configuration • Fully enclosed conveying and central dust removal systems maintain a clean and safe working environment Kledpfsxz A R Eox Ag Ujl System Capacity and Technical Scope • Processing capacity: 500 to 20,000 tons per year • Installed power: 150–1280 kW Applications: • Spent EV and industrial batteries • Consumer lithium-ion batteries (3C) • Positive and negative electrode sheets • Modules, cells, and production scrap Layout: Custom-designed according to client facility requirements. Optional Extensions: • 3E Machinery also offers complementary systems, including: • Battery pack dismantling lines • Separator film cleaning and recycling lines • Black mass refining and purification systems • Aluminum and steel component recycling solutions Why Choose 3E Machinery Technology? • Over 20 years of expertise in recycling technologies • Proprietary patented equipment, including lithium battery crushers and shredders • High level of automation and advanced process safety • Global references with numerous installations across Europe and Asia • Comprehensive support from design to commissioning and after-sales service.