Used Machine and parts cleaning equipment for sale (133)

Year of construction: 2014, Condition: good (used), Serial No. 2.930, wire-link belt, throughput width 250 mm, throughput height 100 mm, spray cleaning with flat jet nozzles, multi-tank system (500 l rinse tank + 800 l wash tank), heating, Siemens PLC control with touch display, switch and control cabinets, stainless steel collecting tray Kslewg E Nwohccqrelu

Year of construction: 2016, Condition: good (used), Functionality: fully functional, 1 used spray parts washer make Bous type Waschfix T6 WF 70 SA Year 2016 Technical data: Mode of operation: The material to be washed is showered off in cycles in a segment drum using a spraying process with heated media. The spraying process ensures cleaning success for a wide range of parts. Aqueous cleaners are used. Klslhccqen Smz Horju Equipment: Washing and rinsing equipment, electrical direct heating, insulation, digital thermostat, stainless steel immersion pumps, stainless steel nozzle systems, coarse filter inserts, drying equipment, segment drum with direct drive, Special equipment ultra-fine filter Drain pump Oil separator

Condition: good (used), Cleaning container, safety container, cleaning container -Material: sheet steel -Container: Ø 295 x 235 mm -Strainer basket: Ø 265 x 100 mm -Number: 3x devices available Kolhccjcnha Ajqrolu -Price: per piece -Dimensions: 310/370/H740 mm -Weight: 8 kg

Condition: excellent (used), Year of construction: 2018, IBS Parts Cleaning Device Type W-250 Heatable device, designed for use with aqueous IBS special cleaners, with large working surface, can also be used as an immersion bath. 2120035 By pressing the foot switch, cleaning fluid flows through the hollow brush, allowing oil- and grease-contaminated parts to be easily brushed clean. Can also be used as an immersion bath. By simply lifting the upper work surface, the parts to be cleaned can be placed in the fluid tank. ► Heatable parts cleaning machine for use with aqueous IBS special cleaners ► Robust and stable construction ► Stainless steel version ► Suitable for cleaning especially large and heavy parts due to high load capacity up to 250 kg ► For manual brush cleaning ► Heatable up to max. 45°C Klslhowtpmaoccqreu ► Industrial version Accessories: washing machines, parts cleaning devices IBS Parts Cleaning Device Type W-250 05.2018 External dimensions device: 1145 x 670 x 1123 mm (W x D x H | closed) 1145 x 780 x 1490 mm (W x D x H | open) Work surface: 1135 x 660 mm (internal dimensions) Working height: 929 mm Load capacity: 250 kg Temperature: max. 45°C Min. fill volume: 45 L Max. fill volume: 100 L Heating power: 2 kW Connection: 230 V, 50 Hz

Condition: good (used), Year of construction: 2021, Functionality: fully functional, total width: 2,000 mm, total length: 1,770 mm, total height: 1,650 mm, pressure: 6.1 bar, input voltage: 400 V, power: 15.4 kW (20.94 HP), maximum load weight: 350 kg, cage diameter: 1,100 mm, compressed air connection: 6 bar, frequency: 50 Hz, heating capacity: 7.5 kW (10.20 HP), injection pressure: 6.1 bar, temperature: 75 °C, type of input current: three-phase, usable height: 600 mm, Industrial washing machine for cleaning and degreasing workpieces by means of an alkaline cleaning agent. Machine made entirely of stainless steel AISI 1.4301. Equipped with double walls with insulation in between. Rotating basket for parts with sprayers for detergent at the top and bottom. Built-in filter for coarse dirt. Equipped with a detergent pump and a drain pump to be able to pump away the used cleaning fluid. Level switches in the tank for detecting the liquid level. Monitoring of any leaks. Switch cabinet with digital temperature display. Cabinet equipped with signal lamp for status indication. Machine is in very good condition and can be used immediately. Klolhcswfdbcjcqrju

Year of construction: 2024, Condition: as good as new (ex-display), Metalclean - Metalclean-P-120 spray cleaning system in stainless steel Single-tank spray cleaning system with rotating basket. With pneumatic oil separator Stainless steel pump with spray pressure 5 BAR Useful dimensions= D= 1,200 mm H= 700 mm Load capacity / batch = 300 KG Tank volume = 270 liters Operating voltage = 3 x 400 V/N/PE 50 Hz Kljlsir Anqohccqrsu Vapor extraction

Year of construction: 2008, Condition: good (used), Biocircle Compact Parts Cleaner For active environmental protection: The ultimate cleaning workbench - parts cleaner is in good used condition. The Bio-Circle workbench cleaner, compact workbench promotes the cleaning fluid to the 3-way tap using an electrically operated pump. Depending on the position of the 3-way tap, the cleaner can be supplied to the table via the hose with a washing brush, including a storage tray for the work surface with the flexible hose, or both. Operated with Bio Circle L Liquid, the container in the parts cleaning table, for example, breaks down the contaminated cleaning fluid (such as from cleaned oil/grease) through microorganisms. According to the Bio-Chem Surface Technology operating manual. The used parts and/or brushes to be cleaned for natural biological parts cleaning have integrated heating, pump, aeration, filter, and have been regularly maintained. The magnet in the drain sieve retains steel particles. Fully functional and well maintained. Environmental protection through environmentally friendly cleaning. Dimensions of the parts cleaning device: Parts cleaner H 1120 x W 900 x D 600 mm Weight 45 kg. "Price / details on request." All technical information subject to typographical errors/mistakes. We sell exclusively only to countries of the European Community. Kelhcjfhdnbecqrjlu

Condition: used, Year of construction: 2019, Technical data: Pressure: 1.5 / 0.15 bar / MPs Flow rate: 4500 l/h Working diameter: 600 mm Usable height: 310 mm Housing/frame: stainless steel Heating power: 4.5 kW Max. temperature: 80°C Adjustable cleaning time: 1 - 30 min Load capacity: 130 kg Connected load: 5.5 kW Tank capacity: 100 l Dimensions (DxWxH), approx.: 1080 x 1000 x 1250 mm Weight, approx.: 165 kg Kjlhccswpq Abeqrelu Equipment: - Fully automatic part cleaning - Motor-driven turntable - 3-dimensional nozzle system - Operating hours counter - Retaining ring (stainless steel for turntable) - 2 lockable swivel castors - Timer for cleaning cycle - Water level control

Year of construction: 1996, Condition: good (used), Parts cleaning system Klelhsi Ra Sisccqrou Manufacturer: LPW Type: Programat FW670/1 Year of manufacture: 1996 Medium: Water Dryer heating power: 12 kW Exhaust air: 500 m3/h 400 V 90 A 50 Hz Filling volume: 0.6 m3 Heating power other baths: 12 kW Electrical connection value: 50 kW Length without table: 3000 mm Length with table: 3700 mm Width: 1600 mm Height: 2500 mm Weight approx.: 3 tons 040625ä

Year of construction: 2000, Condition: reconditioned (used), Functionality: fully functional, Function Easy handling thanks to fully automatic cleaning process. This allows professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS-Special Cleaner WAS (washing lye). The soiled parts are placed in the rotatable washing basket and the lid is closed. After setting the desired wash temperature and time, the device is switched on and the lye is being heated in the tank. In the closed device, the basket rotates at constant speed around its own axis. The pump aggregates draw the lye from the washing tank and transport it through 6 stainless steel nozzle tubes with overlapping flat jet nozzles. The soiled parts are radiated intensively with the hot lye from all sides with a uniform rotation of the motor-driven basket. After completing the cleaning process, the device switches off automatically. Advantage 2 pumps arranged horizontally 6 three-dimensional stainless-steel nozzle tubes robust stainless-steel design additional small parts cleaning basket made of stainless steel (Ø 170 mm) rotating washing basket made of stainless steel, V-belt drive via separate motor steam extraction stainless steel screen with filter basket above the wash tank intake filter in front of the pump shaft water indicator stands are individually adjustable in height Technical data Tank capacity 280 l Basket diameter 1150 mm Capacity 350 kg / optional 500 kg Temperature min. - max. 0-60 °C Kolhohctwwsccqrjlu Working height 700 mm Dimensions (W x D x H) 1570 x 1510 / 1830 x 1495 / 2175 mm Weight 250 kg Heizleistung 10 kW Spray rate 2x10800 l/h Strömungsdruck Pumpe 2,3 bar Material Stainless steel Power supply 13,5 kW/ 400 V /50 Hz / 32 A

Condition: good (used), Year of construction: 2021, Functionality: fully functional, total length: 2,120 mm, total width: 2,670 mm, total height: 1,910 mm, input voltage: 400 V, type of input current: three-phase, pressure: 5 bar, temperature: 90 °C, power: 32 kW (43.51 HP), maximum load weight: 500 kg, workpiece weight (max.): 500 kg, cage diameter: 1,380 mm, frequency: 50 Hz, usable height: 700 mm, Industrial washing machine for cleaning and degreasing workpieces using an alkaline detergent up to pH 14. Machine made entirely of stainless steel AISI 1.4301. Equipped with double walls with insulation in between. Rotating basket for parts with detergent sprayers at the top and bottom. Built-in filter for coarse dirt. Equipped with a detergent pump and a drain pump to pump away the used cleaning fluid. Level switches in the tank for detecting the liquid level. Monitoring of any leaks. Control cabinet with digital temperature display. PLC Siemens S7-1200. Control cabinet equipped with signal lamp for status indication. Machine is in very good condition and can be used immediately. Kslhcjwfdpmjcqrolu

Year of construction: 2025, Condition: new, Functionality: fully functional, Available immediately from Swiss warehouse! 24 months warranty Useful dimensions: Cleaning area D=800 mm Internal height 530 mm Loading weight 150 kg Machine body, internal piping system, control cabinet and washing basket made of stainless steel - Weekly timer for heating - Electronically controlled basket drive - Level control - Lid lock - Removable filter plate Accessories: Steam extraction Kelhccsir Apcjqrelu Automatic level refill Oil skimmer version WE Discharge device / bottom rinsing with piping and manual ball valve

Year of construction: 1981, Condition: used, Parts cleaning machine Pero Rob 3 - 3455 Year of manufacture: 1981 Klelholu Ex Heccqrou Technical data: Operating voltage: 380 V Rated current: 103 A Total heating power: 60 kW Interior dimensions : 2100mm x 1100mm x 800mm L x W x H Outside dimensions : approx. 4300mm x 2100mm x 2800mm L x W x H

Year of construction: 2022, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 33330 052022, BOUS parts washer – little used, top condition – with oil separator & control panel Location: 53840 Troisdorf Price (net): €33,529.41 plus VAT (€39,900 gross) Condition: Used, very well maintained New price: approx. €60,000 Description: For sale is a robust and powerful parts washer from BOUS in Cologne. The system was only used 2-3 times a day, is in excellent condition, and is designed for continuous operation. Due to a relocation, the machine cannot be transported. Features & Benefits: Control panel for safe system operation Large drip tray included Separate oil separator for solids filtration and extending the service life of the cleaning fluid Quality components from brand manufacturers: Siemens control system with panel Grundfos high-pressure pumps Very robust construction, ideal for industrial applications Low operating hours, well-maintained Weight: approx. 2,800 kg Dimensional drawing and wiring diagram available upon request Maintenance and spare parts service provided by Vapic GmbH Technical Specifications: Power: 230/400 V, 50 Hz, PE/N Control voltage: 24 V Connected load: 57/51 kW, 99/85 A Power requirement: Heating: approx. 18.0 kW Kljlhccqjwavwrjrou Wash pump: approx. 5.5 kW High-pressure centrifugal pump: approx. 15.0 kW Oil separator: approx. 0.25 kW Water filling: Approx. 500 liters Compressed air: min. 6 bar, ½" line (filtered, unoiled, dry) Exhaust piping required Transport & Handover: Machine will be handed over disconnected and ready for operation. Transport is the responsibility of the buyer. We are happy to recommend a reputable freight forwarder for pickup. Service & Support: Upon request, we can put you in touch with a specialist who is very familiar with the BOUS machine and can assist you with questions or commissioning. 📩 Contact us now and arrange a viewing! The parts washer is available and ready for use immediately.

Operating hours: 8,250 h, Condition: used, Functionality: fully functional, machine/vehicle number: 102172, Perfect for cleaning small parts made of steel/stainless steel/aluminum, etc. "CeBeCo" spray washing system with Rhön wheel T R O W A M A T Type "XL", size 40100/40 WST (completely overhauled in 2020) - Loading table with rollers included free ===== Klslhccqewm Ap Usrsu - with 6-nozzle system - with direct, electric heating, with digital thermostat display, with insulation of the heating zone, with Rhön wheel, with door flap, with vapor extraction, with submersible pump, with coarse filter basket, with level monitoring, with drying device, with control cabinet, with crane lugs, with leveling feet, with exterior coating. TECHNICAL DATA: ===== Rhön wheel internal dimensions: approx. 1,020 x 400 x 400 mm height designed for * one large basket: External dimensions: approx. 1,000 x 400 x 400 mm height * two standard baskets (with adapter): External dimensions: approx. 470 x 370 x 240 mm height Operational weight: max. 100 kg with evenly distributed load Detergent filling quantity: approx. 400 l Power requirement for heating: approx. 18 kW Power requirement for pump: approx. 5.5 kW Rinse agent filling quantity: approx. 250 l Power requirement for heating: approx. 12 kW Power requirement for pump: approx. 3 kW Fine filter bag: 50 µm fineness Thermostat: digital Insulation: approx. 25 mm Enclosure: galvanized sheet steel Power requirement for extraction: approx. 0.25 kW Power requirement for drive: approx. 0.25 kW Power requirement for hot air: approx. 3x 4.4 kW Power requirement for blower: approx. 2.3 kW Power requirement for emptying and pumping function: approx. 0.45 kW Compressed air: at least 6 bar, ½" supply line Voltage: 230/400 V, 50 Hz Control voltage: 24 V Control: Siemens with panel Total dimensions: approx. 2,740 x 2,255 mm Input height: approx. 1,240 mm Total height: approx. 2,550 mm Labeling: German

Condition: used, Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 10.152.82L, load capacity: 350 kg, empty load weight: 400 kg, water pressure: 2.4 bar, Feet need to be adjusted a bit. Heatable for aqueous cleaning agents. For removing oil and grease contamination in the shortest time. Universally usable for fully automatic cleaning of small parts from production, manufacturing, maintenance, such as bolts, bushings, ball bearings. 2129908 Easy handling thanks to a fully automatic cleaning process. This allows professionals to concentrate on other important tasks. The washing tank is filled with a mixture of water and water-soluble IBS special cleaner (washing lye). The dirty items to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the lye is heated in the tank. In the closed device, the basket rotates at a constant speed around its own axis. The pump units draw the washing lye from the washing tank and convey it through 6 stainless steel nozzle pipes with overlapping flat spray nozzles. The items to be cleaned are intensively sprayed with the hot lye from all sides during the even rotation of the motor-driven basket. Kljlhccqowfgl Dersu After the cleaning process is finished, the device switches off automatically. ∙∙ 2 pumps arranged horizontally ∙∙ 6 three-dimensional nozzle pipes made of stainless steel ∙∙ robust stainless steel design ∙∙ additional small parts cleaning basket made of stainless steel ∙∙ rotating wash basket made of stainless steel, V-belt drive via separate motor ∙∙ steam extraction ∙∙ stainless steel sieve plate with filter basket above the washing tank ∙∙ water shortage safety ∙∙ individually height-adjustable feet WxDxH to 1970 x 1790 x 1500 mm WxDxH open 1970 x 2090 x 2425 mm Useful height: 800 mm Load capacity: 350 kg / optionally 500 kg Basket diameter: 1293 mm Washer tank volume: 340 liters Pump pressure: 2.4 bar Spray rate: 2 x 10,800 L/h Power requirement: 15.1 kW / 400 V / 50 Hz, 32 A Weight: 400 kg Temperature: 0-60°C

Condition: used, TECHNICAL DETAILS 220 POWER SUPPLY - Timer : min [min] - Temperature : °C [°C] Klelhcju Dbpgocqrou - Capacity : 6,9 [l] - Tank dimensions : 488 x 120 x 99 [mm] - Basket dimensions : 465 x 106 x 49 [mm] - Machine weight : 5,6 [kg]

Year of construction: 1992, Condition: good (used), Roll cleaning machine Manufacturer: D.W. Renzmann, year of manufacture 1992, serial no. 21190, for roll widths up to approx. 2,200 mm, with storage tank, extraction, ext. cleaning systems, with distillate tank, capacity 1,000 l, with vacuum, decanting tank, capacity 1,500 l, control and switch cabinet Klslhswndh Ioccqrsu

Year of construction: 2022, Condition: new, LCT bio. X A 100 Biologically based small parts cleaner including 80 liters LCT Bio Liquid cleaning fluid Bag filter Magnet for separating metal chips Washable prefilter Cleaning temperature is a comfortable 41 ° C Environmentally friendly Long service life of the cleaner little space required additional options are possible: Filter housing with washable nylon filter Insert sheet made of V2A to protect the plastic surface Trolley Klsleffhnlehccqrju

Year of construction: 2021, Condition: excellent (used), Functionality: fully functional, Optima steamer XD diesel steam cleaner used very good condition Diesel steam cleaner With accessories 2 x steam hose 10 meter 2 x steam gun Klolhccjwnpkusqrou machine cleaning vehicle cleaning car wash

Year of construction: 2008, Condition: used, filling amount 180 l Kslhowgi Epeccqrjlu injection pressure 1,3 bar 700 l/min diameter 800 mm voltage 400 V frequency 50 Hz dimensions ca. 1200x1300x1100 mm weight of the machine ca. 300 kg

Year of construction: 2008, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: MAXI 91-2, Easy handling thanks to the fully automatic cleaning process. This allows specialists to concentrate on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing suds). The soiled items to be cleaned are placed in the rotating washing basket and the lid is closed. After setting the desired washing temperature and time, the appliance is switched on and the lye in the tank is heated. When the appliance is closed, the basket rotates around its own axis at a constant speed. The pump units draw the suds from the wash tank and convey them through 6 stainless steel nozzle pipes with overlapping flat jet nozzles. The items to be cleaned are intensively blasted with hot suds from all sides while the motor-driven basket rotates evenly. Once the cleaning process is complete, the appliance switches off automatically. Advantages 2 pumps arranged horizontally 6 three-dimensionally arranged stainless steel nozzle pipes Robust stainless steel design Additional small parts cleaning basket made of stainless steel (diameter 170 mm) Rotating stainless steel washing basket, V-belt drive via separate motor Steam extractor Stainless steel sieve plate with filter basket above the wash tank Low water cut-out Stands individually height-adjustable Technical data Kjlhcsudz D Uecqrjlu Dip tank / basket capacity 190 l Diameter of dip tank / basket 910 mm Load capacity 200 kg / optional 300 kg Temperature min. - max. 0-60 °C Working height 500 mm Dimensions (W x D x H) 1310 x 1160 / 1350 x 1285 / 2000 mm Ei8Vwcub0 Weight 150 kg Heat output 6 kW Spray volume 2 x 6600 l/h Stainless steel material Electrical connection 8 kW/ 400 V/ 50 Hz Pump pressure 2.5 bar

Year of construction: 1996, Condition: good (used), Parts cleaning system with ultrasonic device Manufacturer: LPW Type: Programat FW670/1 Year of manufacture: 1996 Medium: Water Dryer heating power: 12 kW Exhaust air: 500 m3/h 400 V 90 A 50 Hz Filling volume: 0.6 m3 Klslhccqji Ra Sforeu Heating power other baths: 12 kW Electrical connection value: 50 kW Ultrasonic device rated power: 4 kW Length without table: 3000 mm Length with table: 3700 mm Width: 1600 mm Height: 2500 mm Weight approx.: 3 tons ä040625

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 5430, System for efficient cleaning of components with water-based cleaning media Working area: 900 x 2100 mm Machine used, some sheets have rusted. Sale without warranty Kljlhcjwqpnrscqrju PERO ROBOMAT systems are designed for cleaning a variety of parts – whether lightly oiled or heavily soiled. In the universal working area of the robust ROBOMAT system, workpieces and parts with very different geometries are positioned and reliably cleaned using powerful spray cleaning. The PERO ROBOMAT is also available as a model with two baths for surface cleaning before painting and final assembly.

Year of construction: 2023, Condition: new, Functionality: fully functional, machine/vehicle number: 23.025.264, The HP25T parts washer is designed for washing, with water-based detergents, at a maximum temperature of 45°C. The machine is built in AISI 304 stainless steel and is particularly suitable for washing small and medium-sized parts. This machine bases its operation on the use of a gun, fed by a 60 bar aqueous solution, via a piston pump, controlled by a pedal. * The machine is supplied with a blowing gun, included in the price. DETAILS : - Usable width : 800 mm - Usable depth : 600 mm - Usable height : 500 mm - Loading height : 1085 mm - Permissible load : 50 Kg - Dimensions (L*D*H) : 1140X940Xh2020mm Kolhcsv Dt Ttecqrjlu FEATURES : - Construction in Aisi 304 stainless steel - High pressure piston pump connected to the washing gun - Level control - Electric heating regulated by a thermostat - Blowing gun (optional) - Removable work surface