Shredder

WEIMA WL 4

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Ljdoy D E U Iopfx An Uoab

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Lodpfxjwnx Uie An Ueab Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Colour: Grey Empty weight: 1.300 kg - Year: 1991 - Documentation available: No Lodpfx Aswu Uy Isn Usab - CE certificate present: No - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 - Opening width [mm]: 600 - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2017, operating hours: 164 h, Residual Wood Shredder WEIMA WL 4 - 164 operating hours Feed opening: 600 mm x 1050 mm Throughput capacity: dependent on material and screen Rotor diameter: 260 mm Rotor speed: 80 - 125 rpm Motor power: 18.5 kW Number of knives: 28 knives, V-rotor Knife dimension: 40 x 40 mm, hollow ground Lsdpfx Asy Rncuen Ueab Screen perforation: 30 mm Extraction nozzle diameter: 160 mm Air velocity: 28 m/sec. CE Weight: approx. 1,300 kg Dimensions L x W x H = 2,045 x 1,190 x 1,640 mm including option with free-cutting hopper including all documentation

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. Laedpfxeu Axfce An Ujb The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: new, Year of construction: 2025, Weima single-shaft shredder Type: WL 4 Rotor diameter: 260 mm Rotor width: 600 mm Self-cutting hopper Logspaser (600x1050 mm) Motor power: 18.5 kW Double knife row with 28 pcs. Weight: 1300 kg Extraction nozzle: 160 mm incl. bolted extraction trough. Screen perforation: 15 / 20 mm (or as requested and agreed) Stock machine immediately available. Lasdpfx Anexwyx Ss Ujb Price ex stock Rosenheim, excluding shipping.

Condition: used, Year of construction: 2023, Special price on request!! Demonstration machine! Machine Concept: The WEIMA high-performance shredders, with their flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips and achieve enormous volume reduction, especially with bulky materials. Operation: The machine is equipped with a large feed hopper, which can be loaded either by conveyor belt or manually. The hopper can be customized according to individual requirements and ensures continuous and cost-effective material feed without the need for manual assistance. A hydraulically controlled pusher supplies the wood waste to be shredded to the rotor's cutting area, operating automatically and load-dependently. The internal slider guides are made of highly wear-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are mounted with universal joints to prevent lateral forces on the piston seals. The patented, profiled V-rotor made from solid steel has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive, and four-way reversible cutters / cutting crowns are located in milled knife pockets on special cutter holders. This patented system, by enabling for the first time the reduction of the cutting gap between the counter knife and rotor, ensures high throughput capacity, low energy consumption, and optimal discharge of shredded material. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one side of the rotor shaft. Technical Specification: Motor power: 18.5 kW Hopper opening: 600 x 800 x 1,050 mm Working width – rotor length: 600 mm Rotor diameter: 256 mm Rotor speed: 60–100 rpm Number of knives: 28 Type and size of knives: concave / 40 x 40 mm cutting crowns Screen hole diameter: 12–15 mm Paint: WEIMA Standard RAL 2002 / 7016 Connection: 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Standard equipment: - V-rotor with one knife row 40 x 40 mm - Vibration-damping machine feet - Pressure bar on pusher - Horizontal pusher - Control cabinet with 5 m cable, incl. PLC control and LOGO! text display - Bolted screen - WEIMA WAP gearbox - Extraction socket Ø160 mm - Straight feed hopper Additional equipment: - Additional rotor knife row (28 knives) Ljdpovfy Rzofx An Ueab - Self-cleaning hopper (LOGSPACER) - 4-way segmented floor - Fast-reverse hydraulics with shock valve Location:

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4655, grinding length: 5,000 mm, grinding width: 500 mm, Sanding length: 5000 mm Sanding width: 500 mm Workpiece height: 250 mm spindle diameter in front bearing: 190.5 mm pivotable 0.7° Max. Torque: 1771 Nm Max. speed: 593 min/-1 Feed: infinitely variable 20-35,000 mm/min Trapezoidal segment head diameter 800 mm with Trapezsegmenten: 94/103x38x200mm Marposs measuring device Lajdpfx Anoq U Ihvo Usb Hydraulic upper part clamping and swiveling Sanding mist extraction system: Hydrocyclone cleaning system Machine weight approx. 27.6 tons Space requirement approx.: 11.2 x 4.3 x 3 m

Condition: good (used), Year of construction: 1995, Slow-speed machine with moving floor, 60 cm rotor width, 18.5 kW motor, fitted with new rotor bearings. Ljdey D Alkepfx An Ueab

Condition: good (used), functionality: fully functional, Rotor approx. 250 mm Laodpfxoy A Rqlo An Ueb Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Motor 18.5 kW Technical data on request

Condition: new, We would like to offer shafts specifically designed for medium-sized shredders equipped with side combs, a breaking bar, and a cassette system. Suitable for models: LINDNER U75, ARJES VZ750, HAMMEL VB750OL, NOVA 75DK Laedpfx Aox Hhwden Ujb - 5-7-7 - 6-7-7 - 8-7-7 - 10-7-7 MRW 2.85: - 5-8-8 - 6-8-8 - 8-8-8 - 10-8-8 PROTECHNIKA is a company with a 21-year history, specializing from its inception in the manufacturing of spare parts and complete recycling systems. In recent years, we have expanded our product range to include grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technologies, we have successfully reduced production lead times while maintaining consistently high quality standards. Grinding shafts are a serial product, which also allows us to collaborate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? The answer is simple: - Certified 3.1 materials - TUV SUD Rheinland quality assurance - ISO 9001 certification - Automated welding processes / ISO 15613 / ISO 15614 - Welders certified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - Independent design department able to fulfil any customer-specific requirements - In-house Research and Development Centre Building long-term customer relationships is our top priority, as your satisfaction is our success!

Condition: like new (used), engine power 18.5 kW hydraulic pressing drawer feed hopper height 90 cm + additional 200 cm Laodpjyzm H Tofx An Usb operating pressure 180 bar control panel operation CE marking year of manufacture 2002

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Ljdpfxsvw Tw Ee An Usab Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm with an extra-ribbed sliding plate

Condition: reconditioned (used), Year of construction: 1995, operating hours: 18,000 h, functionality: fully functional, overall weight: 6,500 kg, Intake length: 1450 mm Intake width & rotor length: 2500 mm Lsdjrrhczepfx An Uoab ᴓ rotor: 370 mm nº of cutters: 71 un (40x40 mm) Rotor speed: 118 rpm Motor: 75 kW Voltage: 400 V Frequency: 50 Hz ᴓ screen: 30 mm Machine weight: 9000 kg Machine in operation

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Laodpforq Eu Rex An Ujb Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm