Used cNC turning and milling centers for sale (615)

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 55,000 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, total height: 2,590 mm, total width: 2,772 mm, controller manufacturer: FANUC, controller model: 0i-F Plus, product length (max.): 7,360 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA 700LM was manufactured in 2023. As new, showroom model. It features a maximum turning length of 3,200 mm and a swing over bed of 900 mm, making it suitable for heavy-duty operations. The machine is equipped with a robust 24" chuck and a powerful spindle motor with a maximum torque of 8,076 Nm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA 700LM turn-mill centre we have for sale. Contact us for further details. • As new, showroom model • Chuck size: 24" (610 mm) • Bar capacity: 164 mm • Rapid traverse (X/Z): 12 / 10 m/min • Max torque: 8,076 Nm • Swing over bed: 900 mm • Spindle motor power: 55 / 45 / 37 kW • Max turning length: 3,200 mm • Turret: 12 stations, BMT 85 interface • Guideway type: Box guideway • Tailstock: Programmable with integrated quill bearing • Application: Universal heavy-duty center for interrupted cuts and high-precision shaft production • Material/casting: Meehanite cast design for high damping • Rigidity: Box guideways for extreme stability in heavy-duty operations Additional equipment • Steady rest: Steady rest carrier SLUSZ • Calibration: Tool setter (auto-hydraulic) • Automation: Auto door • Cooling: High-pressure turret cooling, 14.5 bar • Maintenance tools: Compressed air gun; oil skimmer Technical Specification Counter Spindle No Fpedpfx Ageyrt Has Dsd Driven Tools No

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 18,500 W, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, total height: 1,759 mm, total width: 1,632 mm, controller manufacturer: FANUC, controller model: 0i-F Plus, product length (max.): 2,941 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA GT2100M was manufactured in 2022. As new, showroom model. It features a maximum spindle speed of 4,500 RPM and a robust turret with 12 stations. The machine is designed for high-precision turning and milling, with an X travel of 230 mm and Z travel of 580 mm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA GT2100M turn-mill centre we have for sale. Contact us for further details. • As new, showroom model • Chuck size: 8" (204) • Bar capacity: 65 mm • Rapid traverse (X/Z): 24 / 30 m/min • Turret: 12 stations, BMT 55 interface • Guideway type: Box guideway • Cooling system: Coolant pump 7 bar • Monitoring: Load monitoring Fpedpfeyrt Evsx Ag Dod • Design: Box-guided horizontal turning center with high torque • Performance: Optimized for stable and high-precision machining • Construction: High-speed turret and rigid spindle design Additional equipment • Oil skimmer (filtration) • 3-color signal light (automation) Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2000, spindle motor power: 22,000 W, total height: 2,050 mm, overall weight: 4,000 kg, controller manufacturer: INDEX, controller model: C200-4 / C200-8, This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information. Additional equipment • Synchronous device for counter spindle machining • Tool carrier 3 for synchronous spindle (rear end machining) • Additional milling spindle • Thread milling and polygon turning device • Gripperless tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • with c-axis • no driven tools Machine Benefits Technical Machine Benefits • Space requirement (without material guide): 3580 x 3108 mm • Control unit: resolution: 0. 001 mm (input/output/correction) • Comprehensive movement range with multiple axes configuration Fpodpfjyailzjx Ag Djd • High precision with 0. 001 mm resolution in numerical control • Versatile expansion stages and additional equipment for enhanced functionality Extra Information Movement Cross slide 1 (top) - XYZB axes: X-axis: Slide path 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Slide travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Slide path 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotating): 360° swivel range, angular steps 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s Cross slide 2 (bottom) - XZ axes: X-axis: Slide travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Slide path 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Turret right: X-axis: Slide path 120 mm Z-axis: Slide travel 400 mm Tail Stock Center distance: 400 mm Pressure force (max): 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Delivery rate: 18 l/min System pressure: 90 bar Filling capacity: 70 liters Cooling lubricant system: Pump capacity (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Filling quantity: Approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper Counter spindle: D140 external mount (only tensile clamping permitted for collet and chuck clamping) 1st spindle data (main/counter spindle): Spindle clearance (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle Ø in front bearing: 75 mm (with 30 mm clearance) / 85 mm (42 mm) / 100 mm (60+65 mm) Speed (max): 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Chip diameter (workpiece Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 45,000 W, spindle speed (max.): 3,500 rpm, total height: 2,110 mm, overall weight: 7,600 kg, controller manufacturer: OKUMA, controller model: OSP -P200L, product length (max.): 5,330 mm, number of axes: 2, This Okuma LB400-M was manufactured in 2007. A robust turn-mill centre featuring a swing diameter over bed of 620 mm and over saddle of 420 mm. It offers a bar capacity of 80 mm and a chuck size of 400 mm. The spindle operates at speeds up to 3,500 rpm, powered by a 45 Kw motor. Includes a 12-position motorized turret. Contact us for more information about this machine. • Number of axes: 2 + C • Swing diameter over bed: 620 mm • Swing diameter over saddle: 420 mm • Distance between centers: 1,270 mm • Chuck size: 400 mm • Bar capacity: 80 mm Fjdpfeygxccsx Ag Dopd • Turret type: Motorized • Tool stations: 12 positions • X rapid traverse: 20 m/min • Z rapid traverse: 25 m/min • Tailstock spindle taper: MT #5

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 410 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, total height: 1,990 mm, total width: 1,900 mm, overall weight: 4,200 kg, controller manufacturer: FANUC, controller model: 31i, product length (max.): 2,200 mm, This 5-axis Bumotec s191 was manufactured in 2021. It features a CNC control with a FANUC 31i system and a 15” LCD screen. The machine offers impressive travels with an X-axis of 410 mm, Y-axis of 200 mm, and Z-axis of 400 mm. With a maximum spindle speed of 30,000 rpm and a tool changer with 30 positions, this turn-mill centre is designed for high-quality machining capabilities. Consider the opportunity to buy this Bumotec s191 turn-mill centre. Contact us for further details. • Total installed power: 25 kVA • Power supply: 400V / 50 Hz • CNC: FANUC 31i • Display: 15” LCD screen • Ethernet + Data Server • TCPC 5-axis simultaneous machining • Resolution: 0.1 µm • Measuring system: 10 nm optical scales • Rapid traverse X/Y/Z: 40 m/min • Acceleration: 8 m/s² • Tool Changer: 30 positions HSK 40 • Tool change time: 1.2 s • Chip-to-chip time: 4.4 s • Max tool diameter: 40 mm • Max tool length: 150 mm Fjdeynk D Iopfx Ag Depd • Max tool weight: 1.5 kg

Condition: ready for operation (used), Year of construction: 2023, number of axes: 9, This 9-axis NAKAMURA-TOME WY150 was manufactured in 2023, featuring a turn-mill centre with a comprehensive toolholder setup including 6 external, 4 internal, 3 radial rotating, and 12 axial rotating holders, plus a collet chuck and a 3-jaw chuck. Consider the opportunity to buy this NAKAMURA-TOME WY150 turn-mill centre. Contact us for more information. Fsdoyb Sakspfx Ag Dopd Additional equipment • 6 external toolholders • 4 internal toolholders • 3 radial rotating (driven) toolholders • 12 axial rotating (driven) toolholders • 1 collet chuck • 1 three-jaw chuck

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, total height: 2,250 mm, total width: 2,360 mm, controller manufacturer: FANUC, product length (max.): 3,880 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details. • Chuck size: 8" (204 mm) • Bar capacity: 65 mm • X1/X2 travel: 165 / 100 mm Fedpfxeyrtbqo Ag Depd • Z1/Z2 travel: 700 / 700 mm • Y1/Y2 travel: 30 / 40 mm • Spindle motor power: 22 / 18.5 / 15 kW • Turret stations: 24 (12 + 12) • Turret interface: BMT 55 • Guideway type: High-rigidity linear roller guides • Spindle type: Integral motor spindle with wide speed range • Turret capability: Upper and lower turrets with Y-axis and 12 driven stations each • Structural design: Highly stable Y-axis design for high-volume serial production Additional equipment • Cooling and filtration: High-pressure coolant through turret; Oil skimmer • Sub-spindle features: Coolant supply through sub-spindle; Parts ejector • Parts handling: Parts catcher; Parts conveyor for both spindles • Calibration: Tool setter (auto-electric) • Automation and interfaces: Air conditioning (electrical cabinet); Bar feeder interface; 3-color tower light Additional Information As new, showroom model Technical Specification Driven Tools Yes Counter Spindle No

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface Fpodpfoyffgrsx Ag Djd • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: HEIDENHAIN, controller model: Plus IT 3D CNC Pilot 4290 plus it, number of axes: 7, This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information. • Control unit: Heidenhain Plus IT 3D CNC Pilot 4290 plus it • 4th axis with tailstock (special feature) • Tool magazine with 22 tool positions (optional) • Description: The pinnacle of turning and milling! Additional equipment Fjdpfxeyfv Rbe Ag Djpd • Chip tray

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: MAZATROL, controller model: Matrix, This 5-axis Mazak Integrex 100 IV ST was manufactured in 2011. It features a main spindle with a 6" hydraulic chuck, 4,000 rpm max speed, and 30 kW power. The second spindle matches these capabilities. Its milling spindle can reach up to 20,000 rpm. Includes a high-speed ATC with a 20-tool capacity, expandable to 120. Ideal for single-setup machining with its heavy-duty construction and MAZATROL MATRIX CNC control. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • There are 2 units available Technical Machine Benefits • Chuck type: 6" hydraulic chuck with bar capacity max /spindle speed: 4000 rpm max /power: 30 kw / 22 kw continuous/ max torque: 500 nm /spindle nose: a2-8/ acceleration time: 5. 1 seconds • Type: 6" hydraulic chuck max speed: 4000 rpm max power: 26 kw / 22 kw continuous /max torque: 724 nm /spindle nose: a2-8 /acceleration time: 2. 7 seconds • Max speed: up to 20000 rpm (optional) /max power: 18. 5 kw/ max torque: 119 nm/ taper type: km63, capto c6, bt40 • X-axis: 410 mm/ y-axis: ±70 mm (total 140 mm) /z-axis: 805 mm/ b-axis (milling head): 210° rotation/ c-axis (spindle): 0. 0001° resolution (full contouring) • Max turning diameter: approx. ø545 mm/ max turning length: approx. 600 mm • Tool capacity: 20 tools standard, expandable to 120 /changer type: high-speed cam-driven system Fpodjyalpispfx Ag Djd • Heavy-duty construction with linear guides “done in one” multi-tasking concept for single-setup machining/ cnc control: mazatrol matrix with 3d simulation/ intelligent thermal shield for automatic thermal compensation

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 3,500 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 1,550 mm, total height: 3,200 mm, overall weight: 22,000 kg, controller manufacturer: FANUC, controller model: 16i-TA, number of axes: 9, This 9-axis Nakamura-Tome STW-40 was manufactured in 2000, featuring a max. turning diameter of 570 mm and a turning length up to 1550 mm. It boasts spindle speeds up to 3500 rpm and rapid traverse rates of 25 m/min on X-axes and 30 m/min on Z-axes. Ideal for complex machining tasks, it includes a 80-fold WZG magazine and a hinged belt chip conveyor. Contact us for more information about this machine. Fodpfx Agjyaqpue Dopd Additional equipment • 12000 rpm for upper WZG spindle with 11/7.5 kW drive power and 79/47 Nm torque • 80-fold WZG magazine • Automatic start-up and shut-down of the machine with warm-up program function • WZG breakage control with scanning flag for upper WZG spindle • 2 HD - Brinkmann pumps for upper WZG spindle and lower turret (pump capacity = 45 liters per minute) • Hinged belt chip conveyor with ejection to the right Machine Benefits Technical Machine Benefits • Max turning diameter upper wzg spindle: 570 mm // max turning diameter turret lower left and right: 400 mm • Standard turning diameter: 300 mm • Max turning length turret-bottom left and right: 500 mm • Max turning length upper wzg spindle: 1550 mm • Distance between spindle noses: 1900 mm • Distance between 2 3-jaw chucks: 1500 mm • Power requirement: total connected load of 160 kva • Air consumption: approximately 500 liters per minute • C1 + c2: 400 rpm • B-axis: 12. 5 r/min Extra Information Left / Right spindle: Driving power and torque: 22/15 kW Torque: 500/794 Nm Spindle speed: 30-3500 rpm Spindle nose: A1-8 Inside diameter in front bearing: 130 mm Spindle bore: 85 mm Max bar capacity: 71 mm Max chuck size: 315 mm C - Axis 3 axes simultaneous: X, Z, C Switch-on time: 0.5 sec Rapid traverse speed: 400 rpm (144000 °/min) Feed rate: 1 - 4800 °/min Graduation accuracy: 0.011° (30 angular sec) Repeatability: ± 0.006° (± 20 angular sec) Spindle disk brake torque: 25 kgfm Milling and Bphr drive for upper WZG spindle: CAPTO-C6 Drive power: 15/11 kW from 800 rpm Motor speed: 60 to 6000 rpm Torque: WeldonS, 10, 12, 14, 16, 20, 25 Clamping fixtures attached tools: ER-25/ER-32 collet chuck Dimensions Machine Depth 6200 mm

Condition: ready for operation (used), Year of construction: 2011, spindle motor power: 7,500 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 235 mm, total height: 1,700 mm, overall weight: 3,100 kg, number of axes: 7, This 7-axis Miyano BNA-42DHY turn-mill centre was manufactured in 2011. It features a main spindle with a maximum bar diameter of 42 mm and speeds up to 6000 rpm, complemented by a counter-spindle that handles up to 34 mm and 5000 rpm. Equipped with two turrets, upper with 8 positions and lower with 6, it offers versatile machining options. Includes a chips conveyor and an IEMCA BOSS 545 E bar loader. Contact us for more information about this machine. Additional equipment • Bar Loader: IEMCA BOSS 545 E Machine Benefits Technical Machine Benefits • Live tools power: 1. 0 kw • X/z stroke: 140/310 mm Fpodpfx Asx U Tygog Dsd • Main spindle max. Bar diameter: 42 mm • Main spindle travel: 100 mm • Main spindle c axis indexing precision: 0. 001° • Counter-spindle: max. Bar diameter: 34 mm, spindle speeds: 5000 rpm, spindle power: 5. 5/3. 7 kw, c axis indexing precision: 0. 001° • Total installed power: 30 kva Extra Information Machine still under power Dimensions Machine Depth 2220 mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,960 h, controller manufacturer: HEIDENHAIN, number of axes: 2, This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information. Additional equipment • Bar package with a pick-up device and parts conveyor belt • Bar guide for 1.5 metre bars and workpiece stop • Hainbuch SK 65 clamping top • Indicator light for machine's operating status • Cooling unit for air conditioning the control cabinet • OPTIONAL: A basic tool kit / A large selection of Hainbuch SK 65 clamping heads Machine Benefits Technical Machine Benefits • 12-position tool turret with driven tools at all stations Extra Information Machine still under power Fodpjx Nr T Uefx Ag Dopd

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, overall weight: 620 kg, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar Fjdox D E Hbjpfx Ag Dopd • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: ready for operation (used), Year of construction: 2021, operating hours: 13,392 h, spindle motor power: 13,000 W, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn 3G, number of axes: 3, This 3-axis DMG MORI CTX Alpha 500 V6 was manufactured in 2021. A versatile turn-mill centre featuring a Siemens 840D controller, ERGOline interface, and CELOS manufacturing support. It offers a 470 mm machining length, 6000 rpm max speed, and a 12-position Sauter turret with live tooling. Ideal for complex machining tasks. Contact us for more information about this machine. Additional equipment • CELOS Products • DMG MORI Service Agent • DMG MORI NetService • DMG MORI IoT Connector • DMG MORI Messenger V2 SERVICE Camera • Tail Stock Fodsx D Efwspfx Ag Depd • the 2 SMW-Autoblok BBD17/52 which can also be seen on the machine chuck. • and the addition of the software (tccentric turning and milling cycle, as well as a deburring toothing cycle). Machine Benefits Technical Machine Benefits • Hydraulic cylinder with Ø52 mm through-hole • 12-position sauter turret • Vdi 30 tool mounting (din 69880-30) • Live tool interface (din 5480 standard) • Direct measuring scale on the x-axis • Tool system for turret: trifix® system (din 69880, vdi 3425, din 5480) • Y-axis: ±40 mm travel Extra Information Main Spindle Chuck SMW-Autoblok BBD 170/52 Counter Spindle Chuck SMW-Autoblok BBD 175/52 Counter Spindle Option Programmable tailstock force: Adjustable between 80-300 daN Media Coolant filtration: Dual-cartridge filter (50 μm) Coolant cleaning: External flushing system for spindles Coolant tank with 6-bar pump Automation Bar machining package: Fully hydraulic cylinder Ø52 mm Workpiece catcher with conveyor for parts Ø51 × 185 mm (max 3 kg) 4-color operating mode signal light Bar loader interface compatible with IEMCA, Breuning IRCO, LNS

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. working height: 500 mm Number of tool changer positions: 120 Tool holder: HSK 63T Fpsdpfxox Db D Ao Ag Dsd Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Workpiece swing diameter: 730 mm Accessories: - Chip conveyor and tank - Through-spindle coolant (IKZ) - Showa oil mist extraction system - Renishaw probe The machine is in very good condition and can be inspected under power at its current location.

Condition: good (used), Year of construction: 2006, turning length: 1,000 mm, Machine details Manufacturer/Model: Mazak Quick Turn Nexus 250M Year of manufacture: 2006 (11/2006) Control: Mazatrol 640T Nexus Turning length: 1,200 mm Max. swing diameter: 750 mm Standard machining diameter: 336 mm Max. machining diameter: 420 mm Bar capacity: 102 mm Max. spindle speed: 4,000 rpm Turret: 12-station Chuck: Kitagawa 12" hydraulically actuated 3-jaw chuck Fpedpfx Aowfynfeg Djd Tailstock present Machine weight: approx. 7,500 kg Accessories 4 × driven tools Multiple Mazak tool holders in the turret Additional jaws and accessories available Chip conveyor, coolant tank Loaded onto truck, free of charge.

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,200 mm, Mazak Quick Turn Nexus 350M CNC turning center with Mazatrol 640T Nexus CNC control Year of manufacture: 2004.11 Turning length: 1,200 mm Max. swing diameter: 750 mm Standard machining diameter: 336 mm Max. machining diameter: 420 mm Bar capacity: 102 mm Maximum spindle speed: 4,000 rpm 12-position tool turret Kitagawa 12-inch hydraulic 3-jaw chuck Tailstock Machine weight: 7,500 kg Includes various turret-mounted tool holders, 4 driven tool holders, and additional accessories. Accessories: 4 driven tools Mazak tool holders Fjdpfx Ajx Dccyog Depd Chip conveyor

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor Fodpfx Asym T I Tog Djpd * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: used, Year of construction: 2011, operating hours: 4,598 h, functionality: fully functional, machine/vehicle number: 3087698, turning length: 806 mm, turning diameter over cross slide: 584 mm, turning diameter: 457 mm, spindle motor power: 22,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 318 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 584 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 4,500 rpm, type of input current: three-phase, Many tools included : Automatic cutting fluid filtration system chip conveyor belt Fedpfx Agsycwbpj Dspd coin return system high-pressure sprinkler system

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min Fsdpfx Agsvu E R Se Djpd rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: used, Year of construction: 2001, Lot consists of: Fedjym Rlvepfx Ag Dopd (1) CNC Lathe Technical Details: X/Z 210/610 mm, 12-position tool turret / all positions driven (4,000 rpm), tailstock, C-axes, spindle speed 3,600 rpm, spindle bore 65 mm, coolant unit with KNOLL chip conveyor, and two drawer cabinets with accessories (no warranty of completeness) The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage.

Condition: used, Year of construction: 2006, Lot consists of: (1) CNC Lathe Fsdpfx Asym Rlcog Depd Technical Details: Lot includes 1 x Spinner CNC lathe, an assortment of tools, and 1 x tool cabinet with contents (contents may vary). Tech. specs of the lathe: Max. turning diameter: 430 mm; distance between centers: 730 mm; Turret capacity: up to 12 driven tools; Control type: Fauc 21 i. The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage.

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Fpjdpfx Aeyrrw Rog Ded Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, 1 unit CNC turning center MAZAK SUPER QUICK TURN 15M MARKII. Max. turning diameter approx. 300 mm, max. turning length approx. 528 mm, spindle speed up to 5,000 rpm, 12-station turret. Travel paths: X-axis approx. 180 mm, Z-axis approx. 575 mm. Including tool cabinet and various accessories as per photos and inspection, self-dismantling. Dimensions (L/W/H): 70x55x105 cm. Condition: used. Fsdpfx Asyr H Tyjg Dopd Location of goods: Production hall / left Payment method: Advance payment by bank transfer Shipping: Collection only – No shipping offered for this item!