Used Cnc Turning for sale (14,617)

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, turning length: 285 mm, turning diameter: 280 mm, spindle speed (max.): 3,000 rpm, controller manufacturer: Fanuc, TECHNICAL DETAILS Turning diameter: max. 280 mm Turning length: max. 285 mm Swing diameter: 400 mm Bar capacity: 51 mm Spindle bore: 65 mm Main spindle Spindle nose: A2-6 Spindle speed: 90–3,000 rpm Spindle power: 5.5 kW Chuck size: 215 mm / approx. 8" X-axis travel: 162.5 mm Z-axis travel: 320 mm Rapid traverse X: 16 m/min Rapid traverse Z: 24 m/min Tool stations: 10 Nwjdpfx Ao Afwvbekien MACHINE DETAILS Control system: FANUC Coolant tank: 90 l Dimensions & weight Dimensions (L x W x H): approx. 1,645 x 1,453 x 1,625 mm Machine weight: approx. 2,400 kg Connection voltage: 200 V Frequency: 50 Hz Phases: 3 Connection power: 27 kVA

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar Nodpfjz N H Enjx Akiewn X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 89,307 h, functionality: fully functional, machine/vehicle number: 01180001051, For sale is a powerful and reliable Gildemeister CTX 500E CNC universal lathe in good condition. Thanks to its stable inclined bed design, the machine offers maximum rigidity and excellent precision when machining medium to large workpieces. The machine can be inspected while powered on, by arrangement. Equipment: - Heidenhain control - Single spindle - Three-jaw chuck - 11-position tool turret (partially with driven tools) - Automatic tailstock - Chip conveyor Accessories: - Workbench (4 drawers, 1 door) - Telescopic drawer cabinet Nwsdpfx Ako Afph Noijn Contents: Hand tools, analog/digital measuring instruments Attractive offer – flexible & hassle-free We offer you not only a high-quality product, but also tailored financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes and errors!

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center from the manufacturer DMG, type CTX beta 800, built in 2009. Available immediately. The machine is in good condition and fully functional. Technically sound and ready for immediate use. Technical data: Machine type: CNC turning center Manufacturer: DMG Type: CTX beta 800 Year of manufacture: 2009 Control: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer support technically sound and fully functional Inspection under power possible by arrangement Service and maintenance reports available large accessory package powered tools from WTO further documentation and images available upon request If interested, please write or call. Maschinenhandel Nord Gerstenstraße 2 Nwedpfx Akjyq Hq Nsion 17034 Neubrandenburg

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 25.0122, For sale is a highly precise CNC turning and milling machine, type Benzinger TNE5, manufactured in 2007. Benzinger machines are known worldwide for their exceptional mechanical rigidity, extreme repeatability, and durability. They are particularly used in the watchmaking industry, medical technology, precision engineering, and optics. This model is ideal for the complete machining of complex precision parts from bar stock or in a chuck. Thanks to its robust design and excellent thermal management, the machine is perfectly suited for tight tolerances and hard turning. Equipment: - Siemens Sinumerik control - 2 x 12-station turret - Knoll 200S-1/200 chip conveyor, year of manufacture 2006 - High-pressure hydraulic unit Terms: - ex works. Nwedpe Adz Acefx Akisn Attractive offer – flexible & hassle-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. On request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and on-time process so that you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and expert advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 2010, operating hours: 62,569 h, functionality: fully functional, machine/vehicle number: 00410001121, spindle speed (max.): 5,000 rpm, overall weight: 5,695 kg, Equipment: documentation/manual, We are offering this used DMG CTX beta 500 V6 CNC turning and milling center, year of manufacture 2010. Nsdpfx Akezv Tbqoijwn Serial number: 00410001121 Year of manufacture: 2010 Max. main spindle speed: 5000 rpm Max. counter spindle speed: 6000 rpm Weight: 5695 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Hwacheon HI Eco 31A CNC Lathe, C Axis & Live Tools, Serial Number 1053444L45, Year 1998, Swarf Conveyor, Foot Pedal, Fanuc CNC Control, 2 Jaw & 3 Jaw Power Chucks, Tool Arm, Tailstock, 10 Station Turret, Manuals, Nsdpfxsz N A Avs Akijwn Toolholders, Transformer

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Njdpjyvqdfjfx Akiewn Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1998, operating hours: 95,843 h, functionality: fully functional, machine/vehicle number: 313369, For sale is an extremely robust and precise Gildemeister CTX 400E universal lathe, manufactured in 1998. This machine comes from a factory liquidation and is characterized by its high durability and solid construction. It is ideally suited for precise single-piece and series production. The machine is fully functional and can be inspected while powered on. Equipment: - 3-jaw chuck - 11-position tool turret (some powered tools) - Automatic tailstock - Control panel, Heidenhain CNC Pilot control system - Chip conveyor Accessories: Nodpfo Afpmxjx Akijwn - Workbench (5 drawers, 1 door) with partition Contents: Hand tools Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailored financing options that adapt to your needs. Whether it’s a down payment, installment payments, or individual financing models – together we will find the right solution. Upon request, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors!

Condition: excellent (used), Year of construction: 2018, Technical Data Main spindle, counter spindle Turning length: mm 660 Spindle bore: mm 65 Chuck diameter: mm 165 Speed max.: min-1 6,000 Power (100% / 40% duty cycle): kW 20 / 24 Torque (100% / 40% duty cycle): Nm 125 / 170 C-axis resolution: degrees 0.001 Slide travel X: mm 710 Rapid traverse: m/min 60 Feed force: N 6000 Turret, lower / upper Speed max.: min-1 7,200 Power max.: kW 9 Torque max.: Nm 16 Milling spindle Tool system: HSK-A40 Speed max.: min-1 7,200 Torque (25% duty cycle): Nm 52 Power (25% duty cycle): kW 22 Tool holder 1 Slide travel X: mm 230 Rapid traverse: m/min 30 Feed force: N 6000 Slide travel Y: mm +/-65 Rapid traverse: m/min 15 Feed force: N 10,000 Slide travel Z: mm 845 Rapid traverse: m/min 50 Feed force: N 6000 3 Turrets Turret 1 YB - 6-position tool changer HSK Turret 2 Y Turret 3 y Year of manufacture 2018 Control system Siemens SINUMERIK 840D sl Turning length up to 660 mm Spindle bore 65 mm Milling spindle with 360-degree B-axis Production hours approx. 7,200 h Turret, lower and upper Nwsdoz Sywcspfx Akijn Feature Specification Stations and tool positions 14 stations per turret (VDI 25), a total of 42 tool positions Maximum speed 7,200 min⁻¹ Maximum power 9 kW Maximum torque 16 Nm Milling spindle Feature Specification Tool system HSK-A40 Tool magazine 6 tool positions B-axis 360 degrees Maximum speed 7,200 min⁻¹ Torque at 25 percent duty cycle 52 Nm Power at 25 percent duty cycle 22 kW Tool holder 1 Feature Specification X-axis 230 mm, rapid traverse 30 m/min, feed force 6,000 N Y-axis ±65 mm, rapid traverse 15 m/min, feed force 10,000 N Z-axis 845 mm, rapid traverse 50 m/min, feed force 6,000 N Tool holder 2 Feature Specification X-axis 140 mm, rapid traverse 30 m/min, feed force 6,000 N Y-axis ±45 mm, rapid traverse 15 m/min, feed force 10,000 N Z-axis 810 mm, rapid traverse 50 m/min, feed force 6,000 N Workpiece removal Feature Specification Design Gantry part removal system with conveyor belt Maximum workpiece length 200 mm Maximum workpiece weight 5 kg Dimensions and connection values Feature Specification Length × Width × Height 5,355 × 2,235 × 2,400 mm Weight approx. 8,500 kg Connected power 42 kW Bar feeder magazine and accessories Feature Specification Bar feeder magazine INDEX MBL 65 Coolant system KNOLL system with band filter and high-pressure pump 80 bar Automation Automatic door Accessories Tool holder

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, Nwsdpfjz Srv Djx Akijn 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: good (used), Year of construction: 1998, - Heidenhain CNC Pilot control system - Accessories included - Powered tooling - Counter spindle Work area Max. turning diameter 160 mm Njdpfx Ao Afhifokijwn Swinging diameter over bed 440 mm Swinging diameter over compound slide 210 mm Turning length 350 mm Main spindle Spindle bore 56 mm Max. spindle speed 5,000 rpm Drive power 7.5 kW Number of spindles: Main spindle C-axis Travel distances X-axis 160 mm Z-axis 350 mm Tailstock travel 350 mm Tailstock Arbor diameter 80 mm Tailstock travel 350 mm Tailstock mounting MK 3 Feeds Rapid traverse X 20 m/min Rapid traverse Z 30 m/min Space requirement approx. 2,800 x 1,800 x 1,800 mm Machine weight approx. 3,400 kg

Condition: like new (used), Year of construction: 2015, operating hours: 1,500 h, functionality: fully functional, spindle bore: 118 mm, bar passage: 118 mm, Machine with very few operating hours. As good as new. Machine with a large number of accessories. 20 bar pressure on the coolant. Turret from SMV. Nwodps Afzf Eefx Akijn

Condition: good (used), Year of construction: 2013, 230mm Swing, Nwjdpfxez Sqcve Akion 230mm Max Turned Diameter, 230mm maximum turning length, 12 + 12 Station Turrets, 65mm Bar Capacity, 5000rpm 15KW Main Spindle, Fanuc 31i Control, C Axis to both Spindles, 5000rpm Sub Spindle, +/-50mm Y axis, coolant, swarf conveyor, tool setter, parts catcher, Magazine Bar-feed.

Condition: excellent (used), Year of construction: 2025, 2025 Takisawa EX-2000YS Turn Mill Model EX-2000YS Twin Spindle CNC Lathe With Fanuc Series OI-TF Plus Control With Dual Toptek BL-3000 Bar Feeders 2 Power Collet Chucks. Maximum Swing Ø800mm. Standard Turning Ø250mm. Maximum Turning Ø390mm. Maximum Turning Length 510.5mm. Distance Between Centres 787mm. Maximum Bar Capacity Ø65/52mm. Axis Travel 'X'=250mm, 'Y'=±50mm, 'Z'=590mm, 'B'=570mm. Rapid Traverse 'X'=30m/min, 'Y'=10m/min, 'Z'=36m/min, 'B'=36m/min. Maximum Main Spindle Speed 4,500rpm (15/11kW Motor), Maximum Sub Spindle Speed 5,000rpm (15/11kW Motor), Maximum Rotary Tool Spindle Speed 4,000rpm (15/11kW Motor). 12 Position Turret. Turning Tool Shank 25 x 25mm. Boring Bar Sleeve Ø40mm. Run Hours 1,085. Bar Feeder Lengths 4.35m. S/No. CZ02EX2153 (2025). Nodjz Rqm Sjpfx Akiswn With Coolant System, Chip Conveyor, Foot Switches, Signal Tower & Oil Skimmer. Overall Dimensions L2,600 x W1,932 x H1,800mm. Weight 5,900kg. Please note this asset is located at No. 718, Sec. 2, Yanghu Rd., Sanhu Vil., Yangmei Dist., Taoyuan City 326, Taiwan. Deadline for collection is December 11th 2026.

Condition: like new (used), Year of construction: 2013, operating hours: 1,450 h, functionality: fully functional, turning length: 1,250 mm, spindle bore: 80 mm, Equipment: documentation/manual, Machine with very few operating hours, almost like a new machine. Machine with a lot of accessories. 20 bar pressure in the coolant. Nwjdpfxs Afzffs Akion

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 1,011 mm, turning diameter: 658 mm, spindle bore: 102 mm, travel distance X-axis: 615 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,077 mm, rotational speed (max.): 3,300 rpm, rotational speed (min.): 50 rpm, bar passage: 102 mm, total height: 2,720 mm, total length: 6,585 mm, total width: 2,800 mm, overall weight: 13,400 kg, We are pleased to offer this Mazak Integrex i-400 x 1000 multitasking CNC machine, manufactured in 2011 and equipped with Mazatrol Matrix control. A versatile machine combining turning and milling operations in a single setup, ideal for precision machining and complex (bigger) components. Technical specifications: Turning diameter: 658 mm Max. turning length: 1011 mm Bar capacity: 102 mm Travel on X-axis: 615 mm Travel on Y-axis: 250 mm Travel on Z-axis: 1.077 mm B-axis travel: -120/+120° Main and spindle: 50 - 3300 1/min. B-axis index increments: 0,0001° C-axis indexing of spindle: 0.0001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 36 tool positions NC Tailstock: MK5 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: Nwsdpfx Akjz Rt Dteisn With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Year of construction: 2005 Length: 152 cm Selling price: CHF 35.000 (excl. BTW) Nsdpfs Adzwajx Akiewn X1/X2-axis travel: 630/230mm Y-axis travel: 230mm Z1/Z2-axis travel: 1585/1530mm W-axis travel: 1530mm X1/X2/Y/Z1/Z2/W-axis rapid traverse: 38/38/26/38/38/30 m/min Maximum working length: 1524mm Maximum working diameter: 760mm Main spindle speed: 35-4.000 rpm Sub spindle speed: 35-4.000 rpm Main/sub spindle bore: 88mm Main/sub spindle power: 26 kW Milling spindle speed: 15-12.000 rpm Milling spindle power: 18,5 kW Toolholder type: C6 Positions in the toolmagazine: 80 Positions on turret: 9 Control system: Mazatrol 640MT Pro Equipped with: un-loading magazine, tool pre setter, Mayfran chip conveyor, paper filter, wetter oil mist separator, probe Online auction of best brands modern precision tools, turning and milling CNC metal working machines (e.g. 2019 SPINNER, MAZAK INTEGREX, 2012 STAMA, ROSA ERMANDO etc.) due to the relocation of the main manufacturing operations of Big Kaiser in Switzerland to their main facility in Japan, all currently stored at Weinfelden in Switzerland. The online auction opens Thursday 22 October and closes Thursday 19 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Thursday 12 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2012, turning diameter 465 mm axis distance 1.150 mm control Siemens 840D centre height 360 mm Swivel range via X-slide 465 mm chuck diameter 250 mm travel -x axis 300 mm travel -z axis 1.050 mm rapid power traverse in X-and Z direction 30 m/min Max. workpiece weight – chuck 150 kg Max. workpiece weight – tailstock 350 kg Max. workpiece weight – steady and tailstock 600 kg weight of the machine ca. 7,5 t Nwodpe Afztwofx Akien dimensions of the machine ca. 2,5 x 5,3 x 2,2 m Equipment/Accessories: - 12-station tool turret (VDI 40 mount) - With 6 driven tool stations (VDI 40 coupling) - Hinged chip conveyor - Reinforced coolant pump (12 bar) - Hydraulic 3-jaw chuck (D 315 mm)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,223 h, functionality: fully functional, machine/vehicle number: 1278R18TBF, turning length: 720 mm, turning diameter over cross slide: 530 mm, turning diameter: 320 mm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 270 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 720 mm, bar passage: 65 mm, total height: 2,100 mm, total length: 4,300 mm, total width: 2,000 mm, overall weight: 4,200 kg, number of tool stations in tool turret 3: 12, Due to the closure of the business, an AMV Angelini Oscar turning machine with a Y-axis and counter-spindle is for sale. The machine is very well equipped – 3-jaw chuck for the main and counter-spindle, collet chuck Hainbuch for the main and counter-spindle, parts catcher, prepared for a bar feeder, chip conveyor. Nsdpfx Akoy S R Ateiown High-pressure pump, 12 powered tool stations VDI30. Control system: Fanuc 21 I-TB series. Numerous accessories are included, such as turning tool holders and powered tools. The machine is still connected to power and can be inspected by arrangement. Price includes loading onto a truck (FCA).

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: TJGP2065, TAKISAWA TM-4000Y2 FANUC 31i B2 - TOTALLY AS NEW BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES 10 INCH + 8 INCH STANDARD CHUCK SIZE. WITH:- Y-AXIS TRAVEL -50 +70 MM - UPPER TURRET (Y1 AXIS) Y-AXIS TRAVEL -50 +30 MM - LOWER TURRET (Y2 AXIS) CHIP CONVEYOR - RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE ABNORMAL LOAD DETECTION FUNCTION WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 8" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA BR-08 RH SPINDLE 10" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-10) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT HELICAL INTERPOLATION FUNCTION RAKU-RAKU MONITORING SYSTEM BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE FOR MULTI BAR MAGAZINE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AI CONTOUR CONTROL II CHIP CONVEYOR UPGRADE (MORETECH JAPAN) AXIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE – 4,200 RPM RIGHT HAND SPINDLE - 5,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (- 50 + 70 MM) LOWER TURRET Y2-AXIS (- 50 + 30 MM) 10” + 8” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Diameter Ø 215 MM Nodpfsxrnwlex Akiown Maximum Turning Diameter Ø 215 MM Maximum Turning Length 800 MM Bar Capacity Left Spindle Ø 82 MM Bar Capacity Right Spindle Ø 65 MM AXIS TRAVELS Upper Turret Travel X1 230 / 120 MM Upper Turret Travel Y1 120 (- 50 + 70) MM Upper Turret Travel Z1 800 MM Lower Turret Travel X2 210 / 80 MM Lower Turret Travel Y2 80 (- 50 + 30) MM Lower Turret Travel Z2 800 MM Travel A (RH Spindle) 900 MM LEFT SPINDLE Chuck Size Ø (10”) 254 MM Spindle Speed (RPM) 4,200 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-8 Spindle Bore Ø 94 MM RIGHT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed 5,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM Inner Bearing Dia.120 TURRETS Number of Tools (Upper/Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Dia. 40 MM Milling Shank Diameter 20 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids- X1 / Y1 / Z1 20 / 12 / 30 M / MIN Lower Turret Rapids - X2 / Y2 / Z2 20 / 12 / 30 M / MIN Rapids on A (Right Spindle) 30 M / MIN MOTORS Spindle Motor - LH 18.5 / 15.0 KW Spindle Motor - RH 15.0 / 11.0 KW Turret Driven Tool Motor 7.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 2.5 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 2.5 KW SUPPLY 50 KVA MACHINE L 4,741 MM W 2,748 MM H 2,444 MM 9,370 KG

Condition: good (used), Year of construction: 1990, Johnford 5 VH Milling machine by Johnford with Fagor digital readout, year of manufacture 1990, in good condition CE-compliant!! Technical data: Year of manufacture: 1990 Working area Table clamping surface: 1370 mm x 250 mm Maximum table load: 350 kg Travel distances X-axis travel: 800 mm Y-axis travel: 390 mm Z-axis travel: 380 mm Vertical milling head Spindle speed (vertical): 70 rpm - 3600 rpm Spindle taper: SK40 DIN 2080 Quill stroke: 127 mm Feed Quill feeds (3): 0.04; 0.08; 0.15 mm/rev Drive power Main drive motor output: 3.75 kW Dimensions and weights Dimensions (L x W x H): 2.54 m x 2.16 m x 2.24 m Weight: 1590 kg About the machine: This versatile universal milling machine combines all the advantages of the world’s best-selling milling machine with additional stability. Belonging to the category of conventional milling machines, it stands out as the top model of the 5 VH series with an SK 40 tool taper and a 30% higher net weight. Both the X and Y axes are equipped with infinitely variable feed units. The swiveling vertical milling head offers a wide speed range for machining steel and non-ferrous metals. Further features include a four-stage automatic quill feed, pneumatic tool clamping, and a large table for workpieces and clamping devices. Nwodpfx Asyalc Aokijn Further milling machines from well-known manufacturers can be found on our website.

Condition: like new (used), Year of construction: 2023, Maximum turning diameter 220mm, distance between centres 800mm, swing over bed 240mm, spindle speed 4,000rpm, Nedoz D Eupspfx Akiswn milling speed 12,000rpm, sub-spindle speed 4,000rpm, main spindle bar capacity 66mm, sub spindle bar capacity 66mm, 2 X 12 station turrets, spindle power 35Kw, Y axis + /- 45mm, swarf conveyor, coolant., Fanuc 31i.

Condition: good (used), Year of construction: 2017, Standard turning diameter 150mm, maximum cutting diameter 255mm, maximum cutting length 685mm , Bar capacity main spindle 51mm, spindle speed 5,000rpm, sub-spindle 5,000 rpm, C axis 0.001 degrees, 3 x turrets 24 stations, Y axis +/-45mm, milling speeds 6,000 rpm, main spindle 15kw, Fanuc 31i, swarf conveyor, barfeed unit, parts catcher Nwsdpfx Akezwm Hpoien

Condition: good (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 2600S – CNC turning center with subspindle, FANUC, year 2012 We offer for sale a DOOSAN PUMA 2600S CNC turning center with subspindle, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is in operation and can be demonstrated and tested upon request. Technical specifications: Manufacturer: Doosan Infracore Model: PUMA 2600S Year of manufacture: 09/2012 Njdpfx Aks Acnp Tjiown Serial number: ML0218-000034 CNC control: DOOSAN-FANUC i Series Configuration: main spindle + subspindle Max. turning diameter: approx. 376 mm Max. turning length: approx. 760 mm Main spindle chuck: approx. 10" Bar capacity through main spindle: approx. 76 mm Max. main spindle speed: approx. 3,500 rpm Main spindle power: approx. 18.5 / 22 kW X-axis travel: approx. 260 mm Z-axis travel: approx. 830 mm Turret: 12 positions Automatic subspindle for complete part machining Chip conveyor Rated machine power: 40.7 kVA Power supply: 200/220 V, 3 phases, 50/60 Hz Machine weight: 5,400 kg Robust CNC turning center suitable for both series and single-piece production. Thanks to the subspindle, it enables machining of the part from both sides without the need for manual switching between individual operations. The machine is currently powered on and can be demonstrated in operation.