Used Cnc Sliding Head Lathe for sale (30,201)

Condition: used, Year of construction: 2007, Star SR-20RIII Type 680 Sliding Head CNC Lathe with Fanuc 300iS Control, 5 Axis, Twin Spindle, 14 Turning Tool Bays, 4 End Collet Bays, 4 End Collet Bays, 5 Side Collet Bays, Nobec Fire Suppression System. S/No. 0119 (008) (2007) Run Time - 14998H42M95, FMB Turbo 3 - 36 Barfeed, 3200mm Max Work Piece Length. S/No. 41-260-479/R 565589. Star G42000 High Pressure Coolant System. S/No. 222 (2007) Country of Origin: Japan Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Giolhcowhn Uxjcqmet

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: XD-3211-CU-0891-H, turning diameter: 38 mm, spindle speed (max.): 6,500 rpm, travel distance X-axis: 395 mm, travel distance Y-axis: 422 mm, travel distance Z-axis: 320 mm, total height: 1,750 mm, total length: 2,580 mm, total width: 1,390 mm, overall weight: 3,600 kg, Specification: 32/38mm maximum turned diameter 80mm X (1) axis travel 395mm X (2) axis travel 422mm Y axis travel 320mm Maximum Z (1) axis travel 280mm Z (2) axis travel 6500rpm maximum main spindle speed 5.5/7.5kW Fanuc main spindle power 6500rpm maximum sub spindle speed 2.2/5.5kW / 1.1/3.7kWFanuc sub spindle power 26 tools 16 x 16mm maximum tool shank Gijlhcsvu Tqmocqmot 6000rpm cross slide 2.2kW Fanuc cross slide power 230 litre coolant tank capacity 1.1kW pump power 25kVA power consumption 120~150 litre/min air flow rate 2580 x 1390 x 1750mm machine dimensions (L x W x H) 3600kg machine weight Features: Strong machining performance and high productivity with Fanuc/Siemens control, sub spindle, 6500rpm,38mm spindle kit, up to 26 tools,38mm max turning diameter, featuring: Fanuc32-B Full C Axis controlled main & sub spindle including interpolation Rotary Guide Bush 5 Radial Driven Tools 5 Wedge type turning tool holders 4 Drill Sleeves 4 Station rear tool post (4 x 2 Driven Tools option) Off centre drill unit (2ea/driven, Motor) Tool Breakage sensor (software) Firetrace Fire Suppression Low Chip Conveyor Long Parts Ejection 38mm Conversion Kit Spare M Code Kit Work Beacon LNS Tubo Alpha 3-42/3200 Automatic Barfeeder

Condition: excellent (used), Turning diameter max. 20 mm Turning lenght max. 320 mm Spindle bore 24 mm Spindle speeds 200-10'000 rpm Turret with 10 pos., all of them are driven Barloader LNS Misc. accessories MARCELS MASCHINEN AG Gijlhsmmdacjccqmet

Condition: good (used), Year of construction: 2002, machine/vehicle number: P13147, rotational speed (max.): 8,000 rpm, turning length: 320 mm, equipped with Iemca Boss 432r/32LL new in 2002 - some tool holders - chip conveyor - Mitsubishi MELDAS 635 Control Giolhop T Sy Hoccqmjt

Condition: good (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: XD20BB0393, turning length: 210 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, equipped with Iemca Boss 332E-r/32 barfeed new in 2008 with 12 mm guide channels - chip conveyor - Fanuc 18i-TB Control Gislhsr Arwueccqmet

Year of construction: 1995, Condition: good (used), 510 J type - equipped with Iemca MiniBoss 325/37 new in 1996 - off machine tool eye Gslhsiy Ruljccqmsit

Year of construction: 2005, Condition: good (used), Type 660 - Iemca Boss 332E/32L new in 2005 - machine that has ever worked in oil - Fanuc 18i-TB Control Gelhceppt Sbjcqmeit

Year of construction: 2012, Condition: like new (used), Fixed and live bushing - Iemca Smart 320/32 new in 2018 - very well equipped - chip conveyor - Mitsubishi M70 Control Gslhjikbdvoccqmsit

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, Functionality: fully functional, Controller SIEMENS 828D with Shopturn and 17 inch Touch screen Swing dia 550 mm Turning length 428 mm Max. turning dia 300 mm Spindle bore 62 mm Max bar dia 51 mm Spindle face A2-6 Spindle speed 35 - 5000 rpm motorspindel Travel X axis 210 mm Travel Z axis 561 mm Turret 12-fold (all stations driven) Turret interlock hydraulic Turret drive servo Tool change time 0,2 sec. Tool section 25x 25 mm Max speed of life tools 5000 rpm. Max power of live tools 5 kW Max milling capacity (shaft mill) 16 mm Max milling capacity (milling head) 50 mm Max drilling capacity D16 mm Max tapping capacity M16x2 Rapid speed Z axis 30 m/min Rapid speed X axis 30 m/min Position accuracy 0,008 mm Repeat accuracy 0,003 mm Tailstock Pinole conus MT4 Travel of tailstock body 565 mm Hydraulic tank capacity 20 L. Power of hydraulic pump 1,5 kW Giolhccqswbu T Uemet Hydraulic power 3,5 - 6 Mpa Volumen of lubrication 2 L Power of lubrication pump 25 W Coolant tank volume 130 L Power of coolant pump 25 W Motor power cont. 11 kW 400 Volt 50Hz Motor power short time (30 min) 15 kW 400 Volt 50 Hz Weight 4000 kg Dimensions LxWxH = 2600 x 1685 x 1768 mm Accessories Coolant unit, Turret for 12 driven tools, 200 mm hydr. chuck, Linear guides and ball screws THK/Japan, SHOP TURN, Spindle cooler, Chip conveyor, Tool presetter, automatic tool length compensation, barfeeder interface, air blowing for chuck and turret, high pressure coolant, oil selector.

Condition: good (used), Year of construction: 2002, Traub TNL 12 - 7, Year of construction 2002, Control TX 8i, C axis main spindle, Golhccqoqffqmsmjit Turret 1 with driven tools, Turret 2 with attached tools, Polygon turning turret 2, Front attachment with tool drive, C axis counter spindle, Back drilling station with attached tools and X 4 axis, loading magazine, chip conveyor, belt filter system, coolant system,

Condition: new, Year of construction: 2024, -10 linear axes - Ultra-powerful clamping - Rework spindle and its dedicated 9-position carriage (X4) enable you to carry out complex operations in masked time. - Spindle capacity: 8000 rpm - Oil-cooled electro-spindle - Latest-generation FANUC 31i numerical control - Compact cast-iron structure Gijlhcou Ik Tijcqmst

Condition: used, Year of construction: 2015, MACHINE SPECIFICATION Maximum swing 530mm Swing over cross slide 530mm Maximum machining diameter (upper turret) 500mm Bar work capability main spindle 51mm Bar work capability secondary spindle 51mm Maximum machining length 854mm Maximum support weight main spindle chuck work 150Kg Maximum support weight main spindle shaft work 150Kg Main Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Acceleration and deceleration time 4.0 s Through hole diameter 61mm Motor output (continuous rating) 7.5kW   MACHINE SPECIFICATION Cont’d Secondary Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Milling head Type Single Spindle with ATC unit Tool shank type CAPTO C6 Tool size (OD turning) 20mm Tool size (ID turning) 32mm Tool size (milling tool max. diameter) 130mm Tool size (milling tool max. diameter) 250mm 90° indexing time 0.5 s Feed Axes Rapid feed rate X 40000mm/min Rapid feed rate Z 40000mm/min Rapid feed rate Y 40000mm/min Rapid feed rate W 30000mm/min Movement stroke X 450mm Movement stroke Z 904mm Movement stroke Y 210mm Movement stroke W 903mm Others Coolant tank capacity 210L Power requirements (continuous) 36.71 kVA Air pressure 0.5 Total air capacity 230 I/min Machine dimensions Height of centers 1250mm Length (excluding feed and swarf management system) 2495mm Width (excluding Rotac Rack unloading system) 3030mm Height 2500mm Weight 10,400Kg Auto tool changer & magazine Type of tool magazine 36 MACHINE SPECIFICATION Cont’d Maximum tool diameter (with adjacent tool) 90mm Maximum tool diameter (no adjacent too) 130mm Maximum tool weight 5Kg Giolhcewh Tzwscqmot Maximum tool length 250mm GENERAL MACHINE OPTIONS

Condition: good (used), Year of construction: 2002, Universal CNC lathe BOEHRINGER NG 200 Manufacturer: BOEHRINGER Type: NG200 CNC double Control unit: Siemens 840D Year of construction: 10/2001 Turning diameter: 290 mm Turning length: 850 mm Control: SIEMENS 840 D Turning diameter over bed: 600 mm Turret 1 Turret 2 Counter spindle Counter spindle stock Tailstock C-axis Gslhccovr Eqgjqmjit Driven tools Automatic machine doors - newly retrofitted Z-axis resolution: 40nm (2nm interpolated) Travel path in Z: 740mm Rapid traverse speed in Z: 25 m/min Centering tip SK 30 X-axis resolution: 125nm (8nm interpolated) Travel path in Z: 220mm Rapid traverse speed in Z: 25 m/min Distance between main and counter spindle: 1034mm Drive power: 30-72 kW Torque: 662 Nm Max. speed range: 4500 rpm Spindle head: size 6/8 DIN 55026 Spindle diameter in front bearing: 120 mm Chuck diameter: 200-315mm Spindle bore: 103 mm Tailstock quill holder MK: MK 4 Machine weight approx. [weight]: 11 t Space required approx. [needed space]: 6.0x2.3x2.5 m Complete documentation is available. Inspection under power can be arranged at short notice. We are happy to answer any further questions you may have. Price, ex warehouse here plus VAT. Condition: good - ready for demonstration Delivery: ex warehouse - as seen Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: good (used), Year of construction: 2010, operating hours: 685 h, Functionality: fully functional, Haas GT 20 lathe In good used condition. Year 2010 685 cycle hours Can be loaded Giolhccov E Rxcsqmst

Condition: new, Year of construction: 2023, Functionality: fully functional, type of input current: three-phase, overall weight: 1,030 kg, rotational speed (max.): 2,500 rpm, turning diameter over cross slide: 320 mm, bar passage: 56 mm, spindle motor power: 3,700 W, spindle bore: 56 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 150 rpm, tool mount: 16 mm, turning length: 750 mm, Equipment: rotational speed infinitely variable, Technical Specifications Center Distance 750 mm Center Height 160 mm Swing Diameter Over Bed 320 mm Swing Diameter Over Cross Slide 150 mm Bed Width 215 mm Spindle Bore 56 mm Gjlhccqjwh Aiwomeit Spindle Mount A2-5 Speed Range, Continuously Variable 150 - 2500 rpm Travel X-Axis / Z-Axis 160 mm / 750 mm Rapid Traverse X-Axis / Z-Axis 4 / 7 m/min Number of Tool Positions 6 pcs. Tool Shank Dimensions 16 x 16 mm Positioning Accuracy ± 0.01 mm Quill Diameter 45 mm Quill Travel 100 mm Quill Mount MT 4 Motor Power 3.7 kW Machine dimensions (W x D x H) 1910 x 1150 x 1840 mm Weight approx. 1030 kg

Year of construction: 1999, Condition: good (used), Maschinen-Details Lagernummer 1105-03549 Gislheht Euyoccqmot Maschinenart Bearbeitungszentrum - Vertikal Fabrikat HEAD Typ KVM CUV 10 Baujahr 1999 Steuerungsart CNC Steuerung FANUC OMD Lagerort FRANKREICH Ursprungsland Taiwan Lieferzeit sofort Frachtbasis ab lager HAGUENAU FRANCE Technische Details x-Weg 1020 mm y-Weg 510 mm z-Weg 635 mm Tischaufspannfläche 1200 x 600 mm Drehzahlbereich - fräsen 7500 U/min Steuerung FANUC OMD Antriebsleistung - Frässpindel 11 kW Werkzeugaufnahme BT 40 Anzahl der Werkzeugmagazinplätze 20 Stationen Vorschubbereich 1 - 10000 mm/min Eilgänge: 20 m/min Gesamtleistungsbedarf 25 kW Maschinengewicht ca. 6000 kg Raumbedarf ca. 2500x2400x2600 mm Zubehör Vollschutz - Verkleidung Komplette Maschinendokumentation Zentralschmierung Zusatzinformationen very nice MACHINE CONTROL FANUC O MD SPINDEL BT 40 7500 RPM GEAR BOX

Condition: ready for operation (used), Year of construction: 1988, New Fanuc OT CNC in 2017 with manual guide Electrical cabinet, new motors in 2017 2500mm diameter plates, 2750mm paxi passage 1500mm height passage Maximum plate rotation speed: 100 rpm Gijlhev Racbeccqmet Grinding spindle

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 285827, MACHINE SPECIFICATION Maximum swing 530mm Swing over cross slide 530mm Maximum machining diameter (upper turret) 500mm Bar work capability main spindle 51mm Bar work capability secondary spindle 51mm Maximum machining length 854mm Maximum support weight main spindle chuck work 150Kg Maximum support weight main spindle shaft work 150Kg Main Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Acceleration and deceleration time 4.0 s Through hole diameter 61mm Motor output (continuous rating) 7.5kW   MACHINE SPECIFICATION Cont’d Secondary Spindle Rotating speed maximum 6000 min-1 Rotating speed minimum 35 min-1 Milling head Type Single Spindle with ATC unit Tool shank type CAPTO C6 Tool size (OD turning) 20mm Gelhewhx I Aeccqmsit Tool size (ID turning) 32mm Tool size (milling tool max. diameter) 130mm Tool size (milling tool max. diameter) 250mm 90° indexing time 0.5 s Feed Axes Rapid feed rate X 40000mm/min Rapid feed rate Z 40000mm/min Rapid feed rate Y 40000mm/min Rapid feed rate W 30000mm/min Movement stroke X 450mm Movement stroke Z 904mm Movement stroke Y 210mm Movement stroke W 903mm Others Coolant tank capacity 210L Power requirements (continuous) 36.71 kVA Air pressure 0.5 Total air capacity 230 I/min Machine dimensions Height of centers 1250mm Length (excluding feed and swarf management system) 2495mm Width (excluding Rotac Rack unloading system) 3030mm Height 2500mm Weight 10,400Kg Auto tool changer & magazine Type of tool magazine 36 MACHINE SPECIFICATION Cont’d Maximum tool diameter (with adjacent tool) 90mm Maximum tool diameter (no adjacent too) 130mm Maximum tool weight 5Kg Maximum tool length 250mm GENERAL MACHINE OPTIONS AS092 Automatic power on/off and warm up AS250 ATC auto recovery CO032 Chuck airblast (2nd spindle) BY NC command EL110 Power transformer for European market MM007 Number display magazine panel (n/a with tool ID) MO555 Coolers for ball screw (XZ axis) MO575 Roller guide NO823 USB interface (1 port) SD116 Intelligent performance spindle A SD120 One set of adjusting tools SD130 Foundation kit (plates) SI039 C axis 0.0001° increments

Condition: used, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: MVIP 1530, turning length: 1,500 mm, turning diameter: 300 mm, spindle speed (max.): 3,000 rpm, spindle motor power: 5,000 W, rotational speed (max.): 3,000 rpm, total height: 1,250 mm, total length: 3,150 mm, total width: 1,400 mm, type of input current: three-phase, overall weight: 1,600 kg, Equipment: rotational speed infinitely variable, CNC Lathe MVIP 1530 Manufacturer: Jinan Mingpu CNC Equipment Co., Ltd. Model: MVIP 1530 Year of manufacture: 2017 Available from: 04/2025 (currently still in use) Technical specifications: Max. component length: 1500 mm Max. component diameter: 300 mm Weight: 1600 kg Dimensions (L × W × H): 2850 × 1100 × 1450 mm Voltage: 500 V Power consumption: 5 kW Designed for series production Automatic lubrication Control system: Number of control axes: 4 axes (X, Z, Y, A) Additional installed axes: Axis for parting tool Axis for grinding unit (coarse + fine) Axis for longitudinal drilling Linked axes: 4-axis feed function Rapid traverse speed: max. 60 m/min Rapid traverse rate: F0, 25%, 50%, 100% – 4-step real-time correction Feed rate ratio: 0 ~ 150% – total 16-step real-time correction Interpolation: Linear interpolation, circular interpolation (supports three-point arc interpolation) Spindle functions: Spindle motor: 4 kW Spindle speed: 3000 rpm Spindle is frequency converter-controlled Spindle speed ratio: 50% ~ 120% – step-by-step real-time correction Gislhjwcfwgjccqmet Tool functions: Tool life management Tool calibration Fixed point calibration Test cut calibration Reference point recalibration Human-machine interface (HMI): Redesigned interface, runs via PC with Mach3 software Safety functions Emergency stop Hardware limit switch Software travel range monitoring Data backup & Restoration Machine inspection: Available by appointment

Condition: new, Discover the ultimate power and precision of our vertical lathe series. With its robust construction and proven technology, it delivers groundbreaking results for your machining projects. Experience the limitless possibilities of our CNC variant and take your production to the next level. TECHNICAL MAIN DATA (CNC MODEL): - Max. swing diameter: 1500/1800/2750/4000/5000 mm - Max. turning diameter: 1250/1600/2500/4000/5000 mm - Max. workpiece height: 1000/1600/2000/2000/2000 mm - Spindle motor power: 30/37/55/75 kW - Table diameter: 1000/1250/2250/3600/3600/4500 mm - Max. table speed: 500/400/120/63/63/50 rpm ACCESSORIES: Fanuc or Siemens control, ZF gearbox, chip conveyor, lubrication system, hydraulic system, machine guard, air gun, tricolor lamp, work light, chip cart, foot pedal, standard tool holder. SPECIAL ACCESSORIES: C-axis, tool magazine, linear scale, tool presetter, workpiece probe, electrical cabinet air conditioner, special tool holder, and more. For further details, please refer to the attached PDF file. Golsd I I Iljhccqmeit TECHNICAL MAIN DATA (CONVENTIONAL MACHINE): - Faceplate diameter: 1000|1400|1800|2000|2300 mm - Swing diameter: 1200|1600|2000|2300|2600 mm - Turning height: 1000|1250|1400|1600|1500 mm - Table speed: 6.3-200|5-160|3.2-100|5-160|2.5-80 m/min - Gear stages: 16 - Max. workpiece weight: 3.2|5|8|8|8 t - Main motor power: 22|30|37|37 kW - Approx. machine weight: 9|14|18|23|21 t ACCESSORIES: Tool holder: 5-fold; Faceplate: with 4 jaw clamps; Servo motors: for axis adjustment, and more. For further details, please refer to the attached PDF file. Conventional vertical lathe with solid and proven technology, power, and precision for the machining of heavy workpieces. - Optimal loading - easily accessible with crane and forklift - Vertical support with 5-fold tool holder and side support (optional) with separate feed for internal and external machining - Heavy-duty column construction with wide, hardened guides - Hydraulic clamping of the crossbeam - Stable guide construction provides excellent stability and accuracy to the vertical arm - The spindle runs in a highly precise double-row roller bearing and is adjustable - The drive is through a reduction gear for high torque and a speed range of 2.5 - 80 min- Warranty: 12 months on the machine Now get a 15% energy subsidy from BAFA when replacing an old machine! Also benefit from the favorable leasing and hire purchase conditions of our leasing partners. Ask us about it. Of course, you also receive free delivery, assembly/commissioning, and ready-to-use handover as well as control training from us. The special net price displayed refers to the smallest model of the conventional series. The images show the CNC variants as well as a conventional version.

Condition: excellent (used), Year of construction: 2021, operating hours: 14,841 h, Functionality: fully functional, Control: Fanuc 32i Automation: FMB UNIROBOT GP7-5Pkhs Grinding spindle: Jäger HF spindle Chuck: MicroCentric 4-410-3-QC Max. Ø80 Chip conveyor: Knoll compact filter with hinged belt conveyor Year of manufacture: 2021 Hours: 14841h Hardinge GT27SP CNC lathe: Control: Fanuc 32i Axes: 2 (X and Z) Travel paths: From operating manual measured on tool top plate Z: 286mm / X: 607mm Spindle speed max.: 6000rpm Dimensions of the machine LxWxH: 1850 x 1750 x 1750 Weight: approx. 2100Kg MARPOSS measuring system with automated Dimension compensation Oil mist filter S400 on extendable stand 1525 - 2740mm Spindle cooling possible, currently out of service due to MircoCentric chuck FMB UNIROBOT GP7 Robot: YASKAWA GP7 Control: YASKAWA YRC1000 Jaws: 3 jaws double gripper system with integrated presser and blow-off unit Axes: 6 Machine No.: 11-210314 R 1889290 Year of manufacture: 2021 Dimensions of the robot cell LxWxH: 1850 x 900 x 2000 Weight of the robot cell: No exact details approx. 1000kg Turning station in the robot cell 5x workpiece pallets 400x600mm, side 1: 77 parts / side 2: 150 parts Knoll filter system KF110/570 with Knoll hinged belt conveyor type 320 S-1/50 Filter type: belt filter Serial number: 1513866 Year of manufacture: 2021 Tank volume: 570L Pressure: 5-30Bar Dimensions of the filter system LxWxH: 1800 x 900 x 1900 Weight: No information, estimated at approx. 500-700Kg. Grinding spindle: Jäger SF spindle Type: Z100-M536.03 K1,2S5GS Gislhcsvnt Dtjcqmot Max. speed: 36,000 rpm Supply voltage: 3-phase 200V-480V AC 50/60hz Frequency converter installed in the control cabinet, operation via external control interface Grinding spindle holder RINECK grinding wheel holder Accessories / tools: 3x MAS-MEX20-GT27-1-S385H holder 3x MAS-MEX20 turn sleeve 3x MAS-turn ring 2x hydraulic expansion for internal extractor 1x hydraulic expansion for rotary holder + rotary holder 1x MARPOSS probe with holder

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, Functionality: fully functional, machine/vehicle number: 8046723D038, spindle motor power: 11,000 W, turning diameter over cross slide: 380 mm, spindle speed (max.): 3,000 rpm, overall weight: 2,000 kg, type of input current: three-phase, total width: 1,800 mm, total length: 2,500 mm, total height: 1,800 mm, torque: 373 Nm, Equipment: documentation/manual, CNC LATHE STYLE 350 [850 dbc] - main spindle motor power 11kW - main spindle bore Ø54 mm, 3,000 rpm - manual universal with 3 jaws D200mm - VDI30 turret with 8 positions - Coolant gun, including high-pressure pump - Work area lighting (LED) - Cooling system - Automatic lubrication - Ball screw protection - Full fairing with sliding doors - Speed potentiometer - Coolant control button - Handwheel Golhevvwbloccqmoit - Remote support on machine – allows remote diagnostics

Condition: excellent (used), Year of construction: 2017, operating hours: 34,536 h, Functionality: fully functional, Control: Fanuc 32i A Automation: FMB FANUC UNIROBOT Grinding spindle: Jäger HF spindle Chuck: MicroCentric 4-410-3-QC Max. Ø80 Chip conveyor: Knoll filter system KF110/500 Year of manufacture: 2013 / Commissioning 2017 (exhibition machine) Hours: 34536h Hardinge GT27SP CNC lathe: Control: Fanuc 32i A Gislhccsvntxkeqmot Axes: 2 (X and Z) Travel paths: From the operating manual measured on the tool top plate Z: 286mm / X: 607mm Spindle speed max.: 6000rpm Dimensions of the machine with robot cell LxWxH: 4600 x 1600 x 2700 without status light Weight: approx. 2100Kg MARPOSS measuring system with automated dimension compensation Oil mist filter S400 on extendable stand 1525 - 2740mm Spindle cooling possible, currently out of service due to MircoCentric chuck FMB Unirobot LR Mate Robot: FANUC LR MATE 200iD7L-P2TB Control: FANUC R30iB Max. part diameter feed: Ø70mm Jaws: 3 jaws Double gripper system for gripping in the bore with blow-off unit Axes: 6 Serial number robot: E-83200 Serial number robot control: E15X36204 Year of manufacture: 10/2015 Dimensions of the robot cell: Robot cell sits on the machine (see photos) Weight of the robot cell: No exact details approx. 1000kg Turning station in the robot cell Conveyor belt raw/finished part converted to 2900mm length each Knoll filter system KF110/500 with Knoll hinged belt conveyor type 320 S-1/50 Filter type: belt filter Serial number: 581402 Year of manufacture: 2014 Tank volume: 500L Pressure: 5-30Bar Dimensions LxWxH: 1750 x 750 x 1550 Weight: No information, estimated at approx. 500-700Kg. Grinding spindle: Jäger SF spindle Type: Z80-M530.08 Max. speed: 30,000 rpm Control panel installed in the machine Frequency converter installed in the control cabinet Grinding spindle holder RINECK grinding wheel holder Accessories / tools: 2x MAS-MEX20-GT27-1-S385H holder 2x MAS-MEX20 turn sleeve 2x MAS-turn ring 2x hydraulic expansion for internal extractor 1x holder for rotary holder + rotary holder 1x MARPOSS probe with holder

Condition: good (used), Year of construction: 2013, operating hours: 59,861 h, Functionality: fully functional, Control: Fanuc 32i A Automation: FMB Unirobot MH5LS-SP Grinding spindle: Jäger HF spindle Chuck: MicroCentric 4-410-3-QC Max. Ø80 Chip conveyor: Liqui gravity filter type UR1020 with clean container 180L Year of manufacture: 2013 Hours: 59861h Hardinge GT27SP CNC lathe: Control: Fanuc 32i Axes: 2 (X and Z) Travel paths: From the operating manual measured on the tool top plate Z: 286mm / X: 607mm Spindle speed max.: 6000rpm Dimensions of the machine L x W x H: 1850 x 1750 x 1750 Weight: approx. 2100Kg MARPOSS measuring system with automated dimension compensation Oil mist filter S400 on the machine Spindle cooling possible, currently out of service due to MircoCentric chuck FMB Unirobot MH5LS-SP Gslsvntk Tohccqmeit Robot: Yaskawa Motoman MH005LS Control: DXM100 with handheld programming device Jaws: 3 jaws double gripper system with integrated presser Axes: 6 Serial number robot: RH9G49-3303-1 Serial number robot control: S21K60-2-4-O Year of manufacture: 08/2012 Dimensions of the robot cell L x W x H: 1900 x 950 x 2000 Weight of the robot cell: No exact details approx. 1000kg With blow-off unit Turning station in the robot cell 5x workpiece pallets 400x600mm, side 1: 77 parts / Page 2: 150 parts Liqui gravity filter type UR1020 with clean container Filter type: belt filter Serial number: 33145 Year of manufacture: 2013 Dimensions LxWxH: 1500 x 800 x 1100 Weight: approx. 250Kg Grinding spindle: Jäger SF spindle Type: Z80-M530.05 K1,2CK Max. speed: 30,000 rpm Supply voltage: 3-phase 200V-480V AC 50/60hz Frequency converter installed in the control cabinet, operated via external control interface External cooling unit KKG15 1.5kW Grinding spindle holder Grinding wheel holder RINECK Accessories / tools: 2x MAS-MEX20-GT27-1-S385H holder 2x MAS-MEX20 turn sleeve 2x MAS-turn ring 2x hydraulic expansion for internal extractor 1x holder for rotary holder + rotary holder 1x MARPOSS probe with holder

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft Gislhsnn Rkwoccqmot *