Used Bale presses for sale (214)

Condition: refurbished (used), Year of construction: 1997, Channel baling press Balemaster free tamper, Suitable for paper , foil , corrugated board Machine completely overhauled, hydraulic pump new, main cylinder 3 years Ceb Herpzmzsc Sgmerb

Condition: good (used), Manufacturer: Comp Tip: SB5 Engine: 2,2 KW Cylinder stroke length: 500 mm Creb Hc Seh Eic Aegmjb Chamber size: 500 x 350 x 400 mm

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 161.40.492, Used Strautmann bale press, type: BalePress 3, serial number: 161.40.492, year of construction: 2020, with tape extraction hook Power supply: 230 V 50 Hz Electrical Power: 0,75 kW Protection class: IP54 Pressing force: 27 kN Press stroke: 580 mm Weight of the machine: 275 kg Transport dimensions (lxwxh):1070 x 754 x 2110 mm (without pallet) 1070 x 754 x 1945 mm Filling opening (wxh): ca. 700 x 450 mm Cycle Time: 27 sec. Bale weight 30 kg Bale size in the chamber (lxwxh)*: 500 x 700 x 500 mm Bale tying: strapping with two twines, PP band ADVANTAGES Easy to install and transport Easy to handle bales Practical emptying of bales Foil/cardboard mode switch Simple and safe operation Stable door locking system Stable guide of the press plate "D" level security system. Small space required BP3: Bale tying system with open door; BP3CD: tied bales with door closed Solid construction Wheel door lock Ideal for small shops. The Strautmann BalePress 3/3CD is a small, single-chamber baler. At the same time, it is perfectly suited for baling common and smaller quantities of paper, foil, PET bottles and plastic waste and, thanks to its compact design, it can also fit into a very small space. It is clearly the best alternative for our partners with less waste and a waste container with a small footprint. Depending on the pressed material, the 3 ton pressing force can result in a volume reduction of up to 90%. The machine can produce relatively small and therefore easy to handle bales of up to 35 kg. Crsb Hc Sgsvvk T Ismsb By using it, significant savings in storage and transportation costs can be achieved. Bales are easier to transport and sell than untreated waste. Due to its dimensions, the machine can also fit in a very small space, and because of this, the baling technology is no longer available to our partners who have limited space. Price 3.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: as good as new (ex-display), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 570001809, pressing force: 14 t, bale weight: 170 kg, filling opening width: 800 mm, filling opening length: 1,200 mm, bale length: 900 mm, type of input current: three-phase, bale height: 600 mm, bale width: 800 mm, overall weight: 1,330 kg, HSM 12 Gigant horizontal baling press Our HSM 12 Gigant is in its element anywhere where voluminous cardboard packaging, plastic film or other materials need to be pressed. The extremely large loading aperture makes the unit simple and convenient to load. The result is compact bales which can be easily transported. And if the baler is required urgently in another part of the company – no problem: its 4 castors mean that it can be used anywhere at any time. Pressing power: 140 kN Specific pressing power: 29,16 N/cm² Driving power: 7,5 kW Voltage / Frequency: 400 V / 50 Hz Csb Hsufi A Ijc Sgmerb Cycle time when idling vacío: 30 s Volume throughput in idle operation (theor.): 10,63 m³/h Loading height: 780 mm Loading aperture width x Loading aperture length: 800 x 1200 mm Bale width x Bale height x Bale length: 800 x 600 x 900 mm Bale weight: 170 kg Method of loading: manual Length x Width x Height: 4263 x 1030 x 1623 mm Weight: 1330 kg Type of consumables: Strapping tape Press material: Plastic film, Mixed paper, Cardboard, Getränke und Aluminiumdosen

Condition: good (used), Year of construction: 2011, pressing force: 150 t, power: 0.015 kW (0.02 HP), works fine, possible to try 150ton power 15KW Csb Hcjrl Tgue Sgmsrb works fine can check

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Crobjra Nrxs Hc Sgmjb Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically

Condition: excellent (used), Year of construction: 1991, Baler BOA 45 K Baler BOA 45 K 1 Description, Technical data baler: Manufacturer BOA Type 45 K Year of construction 1991/ 2013 completely overhauled and renewed the PLC Press power main press 70 tons Feed channel 1,500 x 1,000 mm Volume press space 1,7 m³ Theoretic cycle time 18 seconds Bale size 700 x 1,150 mm, length variable Driving motor 2 x 18,5 kW Connected load 60 kW Tying system 4-fold vertical, 2-fold horizontal, fully automatic Throughput rate 6 up to 10 tons/hour, depends on material Bale weight 500 up to 600 kg, depends on material PLC Unitronics EX-D16A3-T016 Volume hydraulic oil tank 800 l Transport dimensions only baler 9,800 x 2,250 x 3,200 mm (l x w x h) Cobsqhnw Ao Hc Sgmjrb Machine weight baler approx. 18 tons Condition: The press was completely overhauled in 2013, provided with a new PLC and is in a good condition. Comments: Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Functionality: fully functional, pressing force: 50 t, bale weight: 400 kg, filling opening width: 1,400 mm, bale length: 1,200 mm, total width: 17,300 mm, total height: 24,300 mm, total length: 64,500 mm, bale height: 1,100 mm, bale width: 750 mm, input voltage: 230 V, power: 15 kW (20.39 HP), Horizontal baler for baling waste (plastic, PET, cardboard) with waste conveyor belt and perforator Creb Hetz R S Djc Sgmsb

Condition: good (used), Functionality: fully functional, machine/vehicle number: 004, bale weight: 5 kg, power: 3 kW (4.08 HP), net weight: 130 kg, Used THERMOPERS, model TO6 the compact plastic waste baler for soft thermoplastics, such as wrapping and shrink films, and to process it into bales. Serial number 004. The Thermopers is the solution to handle the plastic waste stream efficiently. The material can be loaded into the Thermopers directly. When the Thermopers is full it can be closed and started, the rest of the process is fully automatic and silent. The inserted material is compressed and sealed into an easy-to-handle package of approximately 5 kg. Characteristics The volume of the plastic films is reduced by 90% with the Thermopers. Thanks to the compact size of the Thermopers and the connection to a standard 230 Volt socket, the machine is easy to apply everywhere. The Thermopers is easy to operate and the status of the compaction process is clearly displayed by LED indication. The drive of the Thermopers is fully electric and low in maintenance. The size of a package is 60 x 30 x 10 cm and has a weight of approximately 5 kg. Operation The plastic waste material can easily be loaded into the machine via the insertion valve. When the machine is fully loaded, the insertion valve is closed and the machine is started. The plastic material is compressed by a combination of pressing and heating, whereby the outside of the plastic material is sealed around the package as a mantle. Thereafter the package is cooled, and the pressing mechanism will return. When ready, the machine gives an audio signal and the compacted package can be removed. After this the machine can be used again instantly. Advantages • Easy to operate • Fully automatic and silent • Compact machine • 90% volume reduction • Prevents drifting of material • Less storage • Less transport, resulting in a reduction in CO2 emissions • Higher returns / lower costs • Low maintenance • In accordance with machinery directive, CE marked Technical data Width: 70 cm Depth: 50 cm Height: 128 cm (excluding press rods) Height: 208 cm (including press rods) Weight: 130 kg Mains voltage: 230 Volts Power: 3 KW Energy consumption: approximately 1 kWh per package Sales price: 1.550 Euro + VAT, negotiable, FCA Oradea, Romania Cob Hcjr Dufbs Sgmjrb Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 1996, pressing force: 1 t, total height: 1,390 mm, SECOND-HAND COMPACTING PRESS COMAP MOD. SC-10 - CE RULES - Compacting dimensions mm. 1000x700x750 - Loading dimensions mm. 1000x700x1390 - Year 1996 Cob Hc Soua Awhjgmerb

Condition: excellent (used), Year of construction: 2010, Double chamber baler, waste balers, waste balers, waste compactors, waste compactors, paper baler Crebsva E Tqs Hc Sgmeb

Condition: ready for operation (used), Baling press Hsm HL 4809 RE - Large filling opening, ideal for large boxes - Container tipper for convenient filling Power in kN: 480 - Voltage/frequency: 3 x 400 V / 50 Hz Cobjra Ddds Hc Sgmsrb - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Dimensions of the device length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire Year 2014-15

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Year of construction: 2013 The equipment is incomplete and is sold as a part Ceb Hc Sgour Ravomorb Fault: Hydraulic pump missing Control is missing Power supply unit missing

Condition: excellent (used), Functionality: fully functional, filling opening width: 330 mm, filling opening length: 800 mm, bale length: 400 mm, total width: 8,000 mm, total height: 20,500 mm, total length: 38,000 mm, bale height: 400 mm, bale width: 380 mm, Aluminum can baling press. Cob Hc Sstzxiwegmerb

Condition: excellent (used), Year of construction: 2009, Machine dimensions: W x D x H = 1740 x 716 x 2200 mm Machine weight: 850 kg Loading aperture: 700 x 500 mm Press force: 10 t Bale size: 700 x 500 x 700 mm Crob Hsiinrkjc Sgmjb Bale weight up to 100 kg 3x 400 V

Condition: ready for operation (used), Year of construction: 2003, Technical data of baler 18S: Motor: 4kW Connection voltage: 400/50 V/Hz Crebora Aghj Hc Sgmjb Press force: max. 180 kN Cycle time: 22 s Pressing time: 12 s Filling opening W x H: 107 x 62 cm Height w. Floor: 98 cm Ejected bale* W x H x D: approx. 110 x 70 x 70-80 cm Bale weight: 120 - 180 kg max. Dimensions W x D x H: 152 x 95 x 197 cm Weight 850kg The 2003-2007 vintage costs 3500 eur Yearbook 2008-2009 costs 3800 eur The 2010-2013 vintage costs 4500 eur Yearbook 2016-2018 costs 5000 eur

Condition: defective spare-parts repository (used), Year of construction: 2016, Manufacturer: HSM Tip: HL 4809 Re The device is incomplete, for sale in the condition shown, defect: Check: incomplete Cob Hc Sgjur N Uxsmerb Power supply unit is missing The hydraulics of the main motor are missing For sale as a spare part

Year of construction: 2014, Condition: used, Pressforce 35 t Csb Hc Soirntqsgmerb 7,5 kW, 15,5 A Press is in working condition Cilynders are leaking a bit

Condition: good (used), Manufacturer: HSM Tip: HL 4010 Re Basket tilt arm missing, Crob Hc Sgjur N Huemeb

Year of construction: 2011, Condition: excellent (used), Dimension of machine:(W x D x H) 2105 x 1190 x 3185/2325 Crjb Hc Sgjpl R U Semsb Press force 24 t Bale size (W x D x H) 1500 x 800 x 1100 mm Bale weight 400-500 kg Loading aperture 1500 x 650 mm Machine weight 1800 kg 3x 400 V

Condition: good (used), Year of construction: 2012, Functionality: fully functional, Compressive force 548 kN Cjb Hcottay Ts Sgmjrb The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm The weight of the equipment is 2,030 kg

Year of construction: 2010, Condition: like new (used), 3- 400 V Cob Hshwi Dbec Sgmsrb 7,5 kW 15,5 A

Condition: good (used), Year of construction: 2011, Functionality: fully functional, Compressive force 548 kN Crsb Hc Sgottaytsmeb The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg

Condition: good (used), Year of construction: 2013, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg Crsb Hcjttav Nj Sgmob

Condition: good (used), Year of construction: 2012, Functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Csb Hcsttal As Sgmsrb Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm The weight of the equipment is 2,030 kg