Used Bale Grab for sale (1,687)

Condition: good (used), Bale-Pak for pressing shavings in good condition including a scraper conveyor, an ABB stacking robot and an automatic plastic wrapper Dksdpfeimv N Tsx Acnsr

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Djdpfx Acszp H R Ejnekr Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. Dkodozqr Nispfx Acnsr The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, Vertical Baler HSM V-Press 860 plus, Year of Manufacture: 2021 Technical Data: Dkjdpfozqr Irsx Acner Manufacturer: HSM Model: V-Press 860 plus Year of Manufacture: 2021 Operating Hours: 450 Pressing Force: 60 t Drive Power: 4 kW Feed Opening: 1195 x 645 mm Filling Height: 1114 mm Bale Size: approx. 1200 x 1200 x 780 mm Bale Weight: 480 kg Binding: manual Theoretical Cycle Time (idle): 25 s Theoretical Throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, Paper, Cardboard Comment: The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the accuracy of the information provided or for any possible errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment condition is 100% advance payment.

Condition: good (used), Year of construction: 2021, operating hours: 245 h, functionality: fully functional, HSM V-Press 860 plus vertical baling press, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 245 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Dksdpozqr Ilefx Acnor Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any possible errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale takes place at our location, without warranty. Our payment terms are 100% prepayment.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Dedjzh Eztspfx Acnskr Video of the machine in operation available on request. Transport also possible.

Condition: used, Year of construction: 2018, Avermann baling press, type AVOS 1810 BRK-90/100, year of manufacture 2018, cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of the feed hopper: 1,800 x 1,000 mm Throughput capacity at 35 kg/m³: 15.0 t/h Throughput capacity at 60 kg/m³: 20.0 t/h Throughput capacity at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, depending on the material Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by arrangement. Dsdpfx Ajzqc Ngscnekr The sale is made against advance payment, ex works, without warranty.

Condition: excellent (used), color: other, Technical condition: very good Visual appearance: very good Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) Dsdpfx Ajzn Nfiecnekr BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 105102558/89, overall weight: 750 kg, Continuously fillable compactor with rotating roller collects, shreds, and compacts waste using a special steel roller, which ensures a compaction ratio of up to 9:1. It compacts the waste through alternating left/right rotation of the special roller, which continuously applies pressure to the material being fed in. It enables continuous feeding – the compacted waste remains in a transparent PE bag. The compaction station can be installed directly at the point of waste generation within the premises. It is also ideal for continuous filling via chutes or conveyor belts and is easy to operate. CE standards requires particularly little maintenance. Dedjzr H Agjpfx Acnskr

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1737/02, overall weight: 1,995 kg, This multi-chamber baling press compacts a wide variety of materials. This top-loading press is ideal for paper, plastic, metal cans, and plastic packaging. Dksdpfxozr Hxzj Acner

Condition: excellent (used), color: other, Year of construction: 2005, Last haak Rotator Snelwisselsysteem = More information = Dkodpfeymqmtsx Acnjr Dimensions (LxW): 104 x 48 cm Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 1993, Location: Malta Presona LP 50 VH Hydraulic Baler Presona LP 50 VH fully automatic horizontal hydraulic baler available for sale. The machine includes a hydraulic power unit, an automatic wire tying system, PLC controls, a pre-press and main press assembly. Suitable for OCC, paper, plastics, and industrial recyclables. Conveyor system not included. Sale Includes: Presona LP 50 VH horizontal baler Hydraulic unit Main press system Pre-press system Friction channel Automatic wire tying system Needle assembly PLC control system Hydraulic power pack Electrical control cabinet Bale ejection system Not Included: Conveyor system Machine Overview Main Technical Specifications Specification Details Manufacturer: Presona AB Model: LP 50 VH Machine Type: Fully Automatic Horizontal Hydraulic Baler Maximum Hydraulic Pressure: 25 MPa Press Force: 500 kN Power Supply: 220–600V AC, 3 Phase Control Voltage: 24V DC PLC Bale Weight: Up to approx. 800 kg Strapping: Automatic Multi-Wire Tying Operation: Continuous Automatic Operation Materials Suitable for Baling: OCC / cardboard, Waste paper, Newspapers & magazines, Plastics, Packaging waste, General recyclable materials Main Features: Hydraulic Pressing System Heavy-duty hydraulic main press Hydraulic pre-press system Adjustable friction channel pressure Continuous compaction operation Automatic Wire Tying Fully automatic multi-wire tying Hydraulic needle assembly Wire twisting and cutting system PLC Controlled Automatic operating cycles Error monitoring system Programmable material settings One-man operation capability Hydraulic Unit: The hydraulic system includes: Hydraulic pumps Oil tank Pressure regulation valves Oil filters Pressure transmitter Oil temperature monitoring Optional systems mentioned in the manual: Oil cooler Oil pre-heater Remote display Automatic Bale Tying System: The LP 50 VH features: Hydraulic needle assembly Dksdpfezhpa Tjx Acnor Automatic wire feeding Automatic twisting and cutting Multi-wire bale securing system Ideal Applications: Recycling facilities Waste transfer stations Cardboard recycling operations Plastic recycling plants Industrial waste processing Distribution & logistics centres Storage location: Customer

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: V309866-20, pressing force: 126 t, filling opening width: 1,620 mm, filling opening length: 1,000 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 650 kg, total height: 7,034 mm, type of input current: DC, input voltage: 400 V, overall weight: 43,000 kg, noise level: 85 dB, pressure: 280 bar, oil tank capacity: 2,700 l, power: 160 kW (217.54 HP), empty load weight: 43,000 kg, protection type (IP code): IP55, stroke length: 2,900 mm, Equipment: documentation/manual, Dkedpfxeznm H Ds Acner

Condition: used, Year of construction: 2003, equipment belts automatic bundling of parts up to 6 meters retaining forks rollers for feeding towards automatic strapping Dodpfsycxtmox Acnokr

Condition: like new (used), Year of construction: 2023, operating hours: 16 h, Cardboard or raw material press – like new For sale: a like-new raw material press for compressing cardboard. The press was originally purchased for compressing cardboard. However, after commissioning, the supplier switched to a different type of packaging, meaning the press was no longer needed. Djdpozdrf Rsfx Acnokr Condition: Like new Not used or only used minimally Ready for immediate use This is an ideal opportunity to acquire a high-quality machine in like-new condition. I have attached the original invoice in the documents below.

Condition: excellent (used), ABBA ALBAMAT 900 V5-Z1 – Fully automatic channel baler – 90 t pressing force Manufacturer: ABBA Pressentechnik Type: ALBAMAT 900 V5-Z1 The machine is in very good, fully functional condition and is available immediately. An inspection and test run can be arranged. The ABBA ALBAMAT 900 V5-Z1 is a powerful, fully automatic channel baler for high throughput and is ideally suited for compressing a wide variety of recyclable materials. Suitable for: * Cardboard * Waste paper * Corrugated cardboard * Printing waste * Plastics (PET, HDPE, etc.) * Films * Aluminum and tinplate cans * Wood shavings * Glass wool * Shrubbery cuttings Equipment * 90 t pressing force * 1 main press cylinder * Large feed opening * 5-point fully automatic vertical wire tying * Hydraulically automatic 3-sided channel adjustment * Hardox press bed * Hardox piston guide with wear-resistant guide strips * High-performance cooler * Control cabinet and tank heating * 10 different press programs Dkodpfxezil S Us Acner * 5.7” touchscreen operation * Floor and piston slides to protect the tying unit Technical data * Pressing force: 90 t (900 kN) * Feed opening: 1,140 × 1,700 mm * Bale dimensions: approx. 1,080 × 1,100 × up to 1,200 mm * Bale weight paper/cardboard: approx. 500–750 kg (material dependent) * Drive power: 90 kW * Throughput cardboard (35 kg/m³): up to approx. 10 t/h * Flow rate at idle: 698 m³/h * Flow rate under operating conditions: 543 m³/h * Cycle time: 16 seconds * Specific pressing force: 76 N/cm² * Machine weight: approx. 24,000 kg Available for immediate delivery. Transport and loading can also be arranged upon request.

Condition: used, functionality: fully functional, total length: 1,000 mm, load capacity: 2,500 kg, Bale Clamp Condition: Ready for use and fully functional Technical Condition: good Description: Bale Clamp / Rotating Clamp – suitable for forklifts Lifting Capacity: 2,500 kg | Condition: good, fully operational Djdpfozpb Hujx Acnokr Robust bale and rotating clamp designed for professional use in warehousing, recycling, manufacturing, and paper handling. The unit is fully functional, immediately ready for operation, and in good technical and visual condition. Technical Data: Type: Bale clamp / Rotating clamp Capacity: 2,500 kg Length: approx. 1,000 mm Opening width: as specified by device (see photos / inspection) Back width: on request Projection: on request Dead weight: on request Condition: technically good, visually good Location: available immediately Notes: Sale as-is in current used condition. All prices are net plus 19% VAT. Sale exclusively to commercial buyers with valid VAT ID. No warranty or guarantee. Charger note does not apply to attachments, but is systemically retained.

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, Bale press Presona LP 85 VH2 with cross-tying, year of manufacture 2018 Dsdpfx Aozk Dtgocnskr Technical data: Manufacturer: Presona Sweden Type: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pressing force, pre-press: 28 t Pressing force, main press: 85 t Infeed chute: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical volume output: 1200 m³/h Throughput capacity at 30-100 kg/m³: 13-30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2000 L Transport dimensions, press: 10400 x 2400 x 2800 mm (L x W x H) Weight: approx. 27,000 kg Materials: Paper, cardboard, PET bottles, film, light waste. Note: The press is in good condition. It has been removed from ongoing operation. Technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Channel Bale Press Presto HPK 50 HS, Year of Manufacture: 2014 Manufacturer: Presto Model: HPK 50 HS Year: 2014 Dsdpfx Acjzk Drvjnjkr Drive Power: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Feed Opening: 1600 x 650 mm (LxW) Channel Cross-Section: 700 x 950 mm Max. Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Performance at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET bottles Note: All knives and counter-knives as well as all sliding plastics have been replaced. The press is in good condition and has been checked and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Please note: All technical data is based on information provided by the manufacturer. We do not assume liability for the information provided or for possible errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is made against advance payment, ex works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baling press Dixi 50 S, year of manufacture 2019, in very good condition Technical data Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Feed opening: 1200 x 620 mm Feed height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow containers, big bags, textiles, film, polystyrene, non-woven fabric, glass wool, etc. Note: The machine is in very good condition. It has been inspected and tested by us in 28816 Stuhr. The video can be found on our website or our YouTube channel. The operating manual and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors. The offers are subject to change, sale is subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale takes place ex works, without warranty. Dedozk Dqfspfx Acnekr

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Vertical baling press Dixi 50 S, year of manufacture 2020, in very good condition Technical data Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S Year of manufacture: 2020 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Feed opening: 1200 x 620 mm Feed height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Dksdezk Dkfspfx Acnjr Materials: PET bottles, HDPE/LDPE/PP, hollow containers, big bags, textiles, film, polystyrene, non-woven fabric, glass wool, etc. Note: The machine is in very good, like-new condition. The seals on the 2 cylinders for the retaining clamps have been replaced. It was inspected and tested by us in 28816 Stuhr. The video can be found on our website or YouTube channel. The operating manual and EC declaration of conformity are available in German. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, prior sale is reserved, and they can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without any warranty.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 23 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Dedpfxezk Dgmo Acnjkr Tying: 3-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. The hydraulic hoses should be replaced. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale and may be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Bale press Dixi 60 SLS, year of manufacture 2013 Technical data: Manufacturer: Dixi Djdpfx Aozk Df Njcnjkr Year of manufacture: 2013 Pressing force: 60 t Drive power: 11 kW, 23 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, cardboard, film Note: The press is in good, fully functional condition and has been inspected and tested by us. You can find the video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any possible errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baling press Dixi 50 S, year of manufacture 2019, in very good condition. Technical data: Djdpfx Acszk Dfionskr Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Feed opening: 1200 x 620 mm Feed height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, styrofoam, nonwovens, glass wool, etc. The operating manual and EC declaration of conformity are available in German. Note: The machine is in very good condition. It has been inspected and tested by us in 28816 Stuhr. The video can be found on our website or our YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty.

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Bale press Paal Konti 200 D, year of manufacture 2000 Technical data: Manufacturer: Paal Type: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-wire automatic Throughput capacity at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h Dksdpfezk Ddxjx Acnor 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (L x W x H) Machine weight approx. 15,000 kg Materials: Paper, cardboard, film Note: The press is in good condition and has been inspected and tested. A video can be found on our website or YouTube channel. Complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors. The offer is subject to change, prior sale and is revocable at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.