Used Can Baler for sale (286)

Condition: not inspected (used), Hydraulic press for pressing paper etc. materials. The device was operational before disassembly. Ielhcdsh Nyfyjwveid Press dimensions: length 4850 mm, width 1370 mm, height 3000 mm (possibility of reduction 2300 mm). Weight 3500 - 4000 kg. If you have any questions, please contact us at 539 660 495.

Condition: good (used), Year of construction: 2004, operating hours: 25,297 h, pressing force: 150 t, bale weight: 1,200 kg, filling opening width: 1,100 mm, bale length: 1,200 mm, total width: 1,100 mm, Paal 110/150 press in working order sold with conveyor to be overhauled (chain and belt damaged) Iisljvzw Eujhcdwvsd

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, Functionality: fully functional, pressing force: 78 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Iiolhcdsvwlqqjwvod Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2007, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2007 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: Excellent! Fully inspected for operational functionality. FLITS Rental & Sales service: With every machine, we supply a bundle of binding wire (120 wires). Need more binding wire bundles? Request a non-binding quotation. FLITS Rental & Sales is your trusted partner for the sale and rental of high-quality machines for both corporate and private customers. We focus on providing efficient solutions in materials handling, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find a comprehensive range of machines suitable for various sectors. Please also check our listings for: waste balers for efficient waste processing, electric pallet trucks/stackers for safe and swift internal transport, scrubber dryers for thorough and professional floor cleaning, and forklifts in different models, suitable for diverse working environments. By choosing FLITS Rental & Sales, you opt for speed, clarity, and reliability. We think along with you, respond immediately, and ensure you have the right machine promptly. Visit our location You are warmly invited to view the machines at our premises. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, so we can dedicate sufficient time to inform you properly and show you the right machines. Contact Do you have any questions or would you like to receive a non-binding quotation? Don’t hesitate to contact us: Ielhcdwewy N U Dovjid We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing

Condition: good (used), Metall baler type RETEC for sale. It is suitable for soft metals like aluminium. The baler makes cubes from aluminium that are 30x30x35 cm and weigh about 26-28 kg It can produce about 45-46 cubes per hour, so it makes about 1 ton per hour. Iijlhcjwv Sktedwved

Condition: new, We offer spare parts for Dixi balers 60S, 50S, 30S, 18S, 10S, 6S, 5SK, 4S New and used parts available. Ioloq S N Rhshcdwvjid Spare parts catalogs are available on request.

Condition: good (used), Year of construction: 2016, operating hours: 1,799 h, Functionality: fully functional, Vertical baling press HSM V-Press 1160 plus, Year of manufacture: 2016 Technical data: Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Operating hours: 1799 Pressing force: 55 t Drive power: 4 kW Cycle time (idle): 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, cartonboard, films, plastic, PET Iiolhcdwjwvqvnoved The operating manual and EU Declaration of Conformity are available in German. Note: The machine is in very good condition. It has been inspected and tested at our location in 28816 Stuhr. The video can be found above among the pictures, on our website, or on our YouTube channel. Viewings, including under power, are possible at any time by appointment. Upon request, we can also carry out tests with your materials for a handling fee. If you have any questions regarding the machine, please feel free to contact us by phone, Monday to Thursday from 08:00 am to 2:00 pm, and Friday from 08:00 am to 1:00 pm. Please note: All technical specifications are based on the manufacturer's information. We accept no liability for the information provided or any possible errors. Offers are subject to change, prior sale and withdrawal at any time. Inspections are possible by arrangement. The sale is ex location, without warranty or guarantee.

Condition: used, Year of construction: 1996, pressing force: 1,300 t, bale weight: 750 kg, filling opening width: 926 mm, filling opening length: 1,920 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 28,000 kg, power: 110 kW (149.56 HP), cylinder stroke: 2,300 mm, Machine is currently disconnected. The machine is in working condition, but could certainly use some attention. The machine is currently running on one pump. We can offer a replacement of the second pump. We can offer parts, service and installation separately. Iislhcevrfcvjdwvjd The machine is currently in Greece.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, Functionality: fully functional, pressing force: 50 t, bale weight: 550 kg, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale height: 720 mm, bale width: 1,100 mm, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Islhju Thhrjcdwvsid Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 S Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400 V Maximum bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2,400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Filling opening dimensions: 115 cm wide x 80 cm deep x 55 cm high Condition: Very good! Fully inspected and tested. FLITS Rental & Sales service: Each machine is supplied with one bundle of baling wire (120 wires). Need additional bundles? Please request a non-binding quotation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and private individuals. We specialize in providing efficient solutions for internal transport, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find an extensive range of machines suitable for various sectors. Also see our listings for: balers for efficient waste processing, electric pallet trucks/stackers for quick and safe internal transport, scrubber dryers for thorough and professional floor cleaning, forklifts in various models, suitable for a wide range of working environments. When you choose FLITS Rental & Sales, you choose speed, clarity, and reliability. We work with you, respond quickly, and ensure you have the right machine in no time. Visit our location You are most welcome to view the machines at our premises. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to provide you with comprehensive information and show you the right machines. Contact Do you have any questions or would you like to receive a non-binding quote? Please feel free to contact us: Islhjwy N Uqjcdwvjid We are happy to assist you. Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing DIXI

Condition: reconditioned (used), Year of construction: 2018, Functionality: fully functional, For sale: Vertical baler Dixi 60S Year of manufacture 2018 tested, serviced and fully functional Several machines are available. Year of construction 2010-2019 Hydraulic door closer/opener Tying with wire Automatic opening of the filler flap Automatic pressing when closing the filler flap Hydraulic bale ejector Overall height 217cm = no assembly required when setting up Technical data Motor: 7.5 kW Supply voltage: 400/50 V/Hz Pressing force: max. 600 kN Cycle time: 36 s Pressing time: 16 s Filling opening W x H: 116 x 55 cm Iiolhcsq Tb Azodwved Height from floor: 118 cm Bale ejected W x H x D: approx. 120 x 80 x 110 cm Bale weight*: max. 340 - 500 kg Dimensions W x D x H: 189 x 140 x 217 cm Weight: 2430 kg Commercial offer - sale only to traders Offer prices are net prices Invoice + VAT We will gladly prepare an offer incl. delivery

Condition: good (used), Year of construction: 2016, operating hours: 2,074 h, Functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical specifications: Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Operating hours: 2074 Ielhcjwvqvhsdwveid Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, cartons, film, plastic, PET The operating manual and EC declaration of conformity are available in German. Note: The machine is in very good condition. It has been inspected and tested at our site in 28816 Stuhr. The video can be found above in the images, on our website, or on our YouTube channel. Inspections, including powered demonstrations, are possible at any time by appointment. On request, we will also carry out tests with your material for a service fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday from 08:00 to 14:00, and on Fridays from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the accuracy of this information or for any errors. All offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by prior arrangement. The sale is ex location, without warranty or guarantee.

Condition: new, Year of construction: 2013, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 V Bale counter: 83 Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling aperture dimensions: 19.5 x 65 x 111.5 cm FLITS Rental & Sales service: with every machine, we supply one bundle of binding wire (120 wires). Need more bundles? Feel free to request a quote. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and individuals. We focus on providing efficient solutions in internal transport, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find a wide range of machines suitable for use in various sectors. Also check our other listings for: waste balers for efficient waste management, electric pallet trucks/stackers for fast and safe internal transport, scrubber dryers for thorough and professional floor cleaning, forklifts available in various configurations suitable for different working environments. With FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure that you have the right machine in no time. Ielhcdjwxtx Rjwveid You are very welcome to visit and inspect the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, ensuring we have ample time to inform you and showcase the suitable machines. Have questions or would you like a non-binding quote? Please feel free to contact us – we are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile press Waste Waste Processing

Condition: reconditioned (used), Year of construction: 2009, operating hours: 15,334 h, Functionality: fully functional, Europress EP 6500 V5 H4, pressing force 120 t, year of manufacture 2009, drive power 75 kW, only 15,334 operating hours, overhauled Iislhswu Skkscdwvjd Technical data: Manufacturer: Europress Model: 6500 V5 H4 Year of manufacture: 2009 Operating hours: 15,334 hours (as of January) Number of pressed bales: 138,097 bales (as of January) Main press force: 120 t Specific pressing force: 142 kg/cm² Feed hopper dimensions: 1,650 x 1,100 mm Fill volume: 3 m³ Filling volume per press cycle: 1.58 m³ Bale dimensions: 730 x 1,100 mm, variable length Drive power: 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total connected load: 83 kW Current consumption: 150 A Tying: 5-fold vertical, 4-fold horizontal, fully automatic Bale weight: 450 to 900 kg, depending on bale length and material Hydraulic oil tank volume: 1,200 L PLC control: Siemens S7-200 Control panel: Siemens touchscreen Overall dimensions with hopper: 13,465 x 5,200 x 5,074 mm Transport dimensions, baler only: 9,965 x 2,500 x 2,900 mm (L x W x H) Machine weight, baler: approx. 28 t Work carried out on the EP 6500 V5 - Completely derusted and repainted - Entire inner steel floor of the press renewed - Refurbishment of the ram (steel structure) - Complete overhaul of the horizontal and vertical lance box - All internal Hardox linings renewed - All hydraulic hoses replaced - Both cylinder lifters replaced - New knives and counter-knives - All hydraulic cylinders re-sealed and tested - All sliding and guide plastics renewed - Wire deflection pulleys replaced - Various cables and sensors replaced - Replacement of various electrical components (control cabinet) - Complete inspection of the electrics/control system - Complete pressure test of the hydraulics Notes: The machine has been overhauled, tested and inspected by us. You can find the video on our website or our YouTube channel. Inspections, including under power, are possible at any time by appointment. On request, we can also carry out test runs with your material for a nominal fee. If you have questions about the machine, we are happy to provide information by phone from Monday to Thursday, 08:00 to 14:00. On Friday we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the data provided or for any errors. Offers are subject to change, prior sale reserved and can be revoked at any time. Viewings are possible by appointment. Sale is ex location, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Iiolhcdwswxtwmoved Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: each machine comes with a bundle of binding wire (120 wires). Need more binding wire bundles? Request a no-obligation quote. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and private individuals. We focus on providing efficient solutions in the fields of internal transport, cleaning, waste processing, and working at height. At FLITS Rental & Sales you will find a wide range of machines suitable for various sectors. Also see our listings for: waste balers for efficient waste processing, electric pallet trucks/stackers for fast and safe internal transport, scrubber dryers for thorough and professional floor cleaning, forklifts in various configurations suitable for a wide range of working environments. With FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond promptly, and ensure you have the right machine quickly. You are very welcome to visit and view the machines at our location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, so we can take the time to inform you properly and show the right machines. Do you have any questions or would you like to receive a non-binding quote? Please feel free to contact us: we are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing

Condition: good (used), Year of construction: 2016, operating hours: 1,715 h, Functionality: fully functional, HSM V-Press 1160 plus vertical baler, year of manufacture 2016 Technical data: Manufacturer: HSM Type: V-Press 1160 plus Stock no.: 9919 Year of manufacture: 2016 Operating hours: 1715 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (WxDxH) Weight: 2430 kg Ijlhjwuz A Aecdwveid Materials: paper, cardboard, cardboard, film, plastic, PET The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in good condition with slight scratches and dents. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale is ex works, without guarantee or warranty.

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Feed opening: 1200 x 620 mm Feed height: 1000 mm Bale size: 1200 x 800 x 830 mm Ielhcjwuzv Nodwvjid Bale weight: 300-350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, styrofoam, fleece, glass wool, etc. The operating instructions and EC declaration of conformity are available in German. Note: The machine is in very good condition. It has been checked and tested by us in 28816 Stuhr. The video can be found above in the pictures, or on our website or YouTube channel. Inspections, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for a handling fee. We will gladly answer any questions about the machine by phone from Monday to Thursday from 8:00 to 14:00. On Friday we are available from 8:00 to 13:00. Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is ex location, without warranty and guarantee.

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, Vertical baler Dixi 50 S, year of construction 2020, very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S PET Year of construction: 2020 Drive power: 7.5 kW Press force: 50 t Press time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Binding: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, styrofoam, fleece, glass wool, etc. The operating manual and EC declaration of conformity are available in German. Islowuzu Ejhcdwvoid Note: The machine is in a very good, as-new condition. The seals on the 2 cylinders for the retaining clamps have been renewed. It was checked and tested by us in 28816 Stuhr. The video can be found above in the pictures, or on our website or our YouTube channel. Inspections, including with power, are possible at any time by arrangement. On request, we also conduct tests with your material for a fee. We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data refer to the manufacturer's information. We accept no liability for the information provided or for any possible errors. The offers are subject to change, prior sale reserved, and revocable at any time. Inspections are possible by arrangement. The sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2016, operating hours: 287 h, Functionality: fully functional, Baler HSM, model HL 7009 Re, with lifting-tilting device, year of manufacture 2016 Technical data: Manufacturer: HSM Model: HL 7009 Re Year of manufacture: 2016 Operating hours: 287 Pressing force: 70 t Specific pressing force: 58 N/cm² Cycle time of the lifting-tilting device: 17 s Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Tying: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The machine is in very good condition. A new, original HSM main cylinder has been installed. The baler was inspected and tested at our premises in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Upon request, we also carry out tests with your material for a fee. We are happy to answer your questions about the machine also by phone from Monday to Thursday from 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: Ielhcjwurncodwvsid All technical data are based on information provided by the manufacturer. We do not accept any liability for the information provided or for possible errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. Sale is ex works, against prepayment, without warranty or guarantee.

Condition: good (used), Year of construction: 2012, operating hours: 11,238 h, Functionality: fully functional, Baler Strautmann, Model BaleTainer, Pressing Force 60 t, Year of Manufacture 2012 Technical Specifications: Manufacturer: Strautmann Umwelttechnik Iijlhewurmxscdwved Model: BaleTainer Year of manufacture: 2012 Operating hours: 11,238 Pressing force: 60 t Total power connection: 20 kW, 400 V / 50 Hz Filling opening height: 2,032 mm Filling opening width: 1,069 mm Bale dimensions: 1,100 x 1,100 x 700 mm (W x D x H), 3 plates Bale weight up to 400 kg (3 plates) Tying: 4-fold vertical Machine dimensions with feed: 6,572 x 2,056 x 2,756 mm (L x W x H) Weight approx. 7,450 kg Materials: Paper, cardboard, PET bottles, film Remarks: The baler is in good condition. It has been inspected and tested at our premises in 28816 Stuhr. You can find the video above with the images, on our website, or on our YouTube channel. Visits, even under power, are possible by arrangement at any time. On request, we can also carry out tests with your material for a service fee. We are happy to answer questions about the machine by telephone from Monday to Thursday, 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not accept liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex-works for advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, Functionality: fully functional, Presto CC 20 M baler, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Manufacturer: Presto Type: CC 20 M Year of manufacture: 2019 Operating hours: 1,022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Ijljwurh Ashcdwveid Tying: triple, manual Throughput at bulk density: 35 kg/m³ – 1.6 t 60 kg/m³ – 2.3 t 100 kg/m³ – 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2,500 kg Materials: paper, cardboard, film Note: The machine is in good condition. It has been checked and tested at our site in 28816 Stuhr. The video can be found above among the pictures, on our website or on our YouTube channel. Viewing, including under power, is possible at any time by appointment. Video calls are available on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 08:00 to 14:00, Friday from 08:00 to 13:00. Please note: All technical data is based on manufacturer’s information. We do not accept liability for the accuracy or completeness of the details or for possible errors. All offers are subject to change, prior sale reserved and may be withdrawn at any time. Viewing possible by appointment. Sale from current location, without warranty or guarantee. Request more information

Condition: good (used), Year of construction: 2015, Functionality: fully functional, Baler Paal Pacomat II-50 C, Year of Manufacture 2015 Technical Data: Manufacturer: Paal Model: Pacomat II-50 C Year of Manufacture: 2015 Pressing Force: 50 t Islhcdwswurgrevsid Drive Power: 45 kW Feed Opening: 1200 x 620 mm Bale Size: 700 x 1000 mm, length variable Tying: 4-fold automatic Throughput at: 35 kg/m³ approx. 6.7 t/h 60 kg/m³ approx. 10.6 t/h Bale Weight: up to 500 kg Transport Dimensions: approx. 7300 x 2000 x 2500 mm (LxWxH) Machine Weight: approx. 8,500 kg Materials: Paper, Cardboard, Film The baler is in good condition and was only used for waste paper and die-cutting residues. It was inspected and tested at our facility in 28816 Stuhr. The video can be found above in the pictures, on our website or on our YouTube channel. The complete documentation including CE declaration, electrical diagram, and hydraulic diagram is available in German. Viewings, including under power, are possible by arrangement at any time. Upon request, we can also carry out tests with your material for a fee. If you have any questions about the machine, we will be happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's information. We do not assume any liability for the specifications or possible errors. This offer is non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. Sales are ex works, payment in advance, without warranty or guarantee.

Condition: good (used), Year of construction: 2014, operating hours: 3,514 h, Functionality: fully functional, Baler Presto HPK 50 HS, Year 2014 Technical Data Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2014 Operating hours: 3514 Drive: 30 kW Pressing force: 50 t Feed opening: 1600 x 650 mm (L x W) Channel cross-section: 700 x 950 mm Maximum feed volume: 1.06 m³ Cycle time: 20 s Tying: 4-fold Throughput at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine weight: approx. 12,000 kg Materials: Paper, cardboard, film, PET bottles Remark: The baler is in good condition. The slide and guide plastics have been replaced. We recommend replacing the knife/counter-knife. The hydraulic hoses are from 2017 and should be replaced together with the filter. The operating manual and CE declaration are available in digital form. Inspections, including under power, are possible at any time by appointment. On request, we can also carry out tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Iislhcdewurf Uswvod Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the accuracy of these details or for possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. Sale is ex-works, against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, Functionality: fully functional, Presto CC 50 M baler, semi-automatic, year of manufacture 2015, pressing force 50 t, with lift-tilt device Technical specifications: Manufacturer: Presto Type: CC 50 M Year of construction: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput capacity with bulk density of 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: paper, cardboard, film The operating instructions are available in German. Iiolhcdjwuq T Rowvjd Remark: The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale against prepayment is ex works, without warranty and guarantee.

Condition: good (used), Year of construction: 2015, Functionality: fully functional, Dixi 80 SLD baler, with lift/tilt device, semi-automatic, year of manufacture 2015, overhauled Manufacturer: Dixi Type: Dixi 80 SLD Year of construction: 2015 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Tying: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, carton The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in good condition. The hydraulic hoses and plastic guides have been replaced. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale against prepayment is ex works, without warranty and guarantee. Iijlhjwuq Tkscdwvjd