Used Vertical Jig Boring Machine for sale (92,398)

Condition: used, Year of construction: 1987, Scheer DB5 Line Boring Machine – used, year of manufacture 1987 For sale is a Scheer DB5 line boring machine. The machine is pre-owned but in working condition and ready for immediate use. Technical data: • Year of manufacture: 1987 • Power supply: 380 V • Power: 2.2 kW • 21 spindles, 32 mm pitch Fsdoxc Twlepfx Ad Njpp • Stop ruler included • Various dowel drills included • Portal clearance: 1056 mm Condition: • Used, age-related with normal signs of wear • Machine is running and can be inspected and tested on site by appointment • Note: A few pneumatic hoses should be replaced (currently slight hissing noise). Additionally, a fuse needs to be replaced as it trips when switched on (currently bypassed as a temporary fix).

Condition: used, Year of construction: 1993, max. wheel diameter 125 mm total power requirement 34 kW kW weight of the machine ca. ca6.9 t t dimensions of the machine ca. ca. 3.3 x 2,1 x 2,5 m m Fpedpfxjtugkrs Ad Nsp

Year of construction: 2002, operating hours: 20,204 h, condition: ready for operation (used), Control Unit Brand BATTENFELD This Battenfeld Vertical R60 125H was manufactured in 2002. It includes a Simar granulate dryer, enhancing its functionality. An optional package offers an Easychill water cooler and two single temperature control units for an additional cost. Contact us for more information about this machine. Fedexulffopfx Ad Nepp Application Types Injection Moulding

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz Fodpfjv Rrq Djx Ad Njpp control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Condition: new, The VHF 2.2 is a powerful Conventional Vertical Milling Machine from the renowned KNUTH brand, designed for versatility in Universal Milling Machines. This machine features large travels and a vertical and horizontal spindle, each with separate drives, providing robust machining capabilities. The vertical head swivels ±45° and includes a movable quill, making it ideal for various tasks in repair or training shops. It boasts a high-strength cast-iron machine bed, precision-ground guideways, and a sizable milling table setup area of 1,270x280 mm. With an automatic feed system on the X and Y axes, operators can maneuver effortlessly. The standard equipment includes an outer arbor support, coolant system, and work lamp, ensuring a comprehensive setup for efficiency and comfort. With its excellent price/performance ratio, the VHF 2.2 stands out as a precise and reliable choice in the Conventional Vertical Milling Machines category. Don't miss the opportunity to enhance your machining capabilities; request a quote today. Fpodpfjuzll Hsx Ad Nep

Condition: good (used), Year of construction: 2016, Serial no. 1020802, lot of automatic mono film, transparent Fpedpfx Asxt Ngwod Nep +++ Attention: Machine is part of an online auction! +++ +++ Sale subject to reservation, only in combination with item 438a Audion DW01 +++

Condition: used, x-axis / mm y-axis / mm z-axis / mm The boring mill is sold without clamping plates – the price refers exclusively to the boring mill. Technical data Horizontal milling and drilling machine with support sleeve Working range Vertical adjustment of the headstock from the clamping surface: 0 - 3000 mm Horizontal adjustment of the column: 7000 mm Maximum drilling depth with drill spindle alone: 1200 mm Maximum drilling depth with drill spindle and support sleeve together: 1300 mm Drill spindle diameter: 150 mm Milling spindle diameter: 240 mm Support sleeve diameter: 390 mm Support sleeve extension: 700 mm Drill spindle tool holder: ISO 50 Maximum workpiece weight: 70,000 kg When placed in 4 prisms: 95,000 kg Main drive Total speed range, adjustable from 2 - 795 rpm Series 1 2 - 50.4 rpm Series 2 50.4 - 126 rpm Series 3 126 - 314 rpm Series 4 314 - 795 rpm Maximum drive power at rated speed 17.5 80 kW Quick adjustment speed of spindle box and column 1800 mm/min Rapid adjustment speed of drill spindle and support sleeve 1400 mm/min Fine adjustment speed of spindle box and column medium 75 mm/min Fine 3 mm/min Fine adjustment speed of drill spindle and support sleeve Medium 57.7 mm/min Fine 2.5 mm/min Feed of headstock and column for milling Row 1 3 - 75 mm/min Row 2 72 - 1800 mm/min Feed of drill spindle for drilling Row 1 0.19 - 4.7 mm/min Row 2 2.2 - 56 mm/min Row 3 56 - 1400 mm/min Special equipment Numerical length measuring device in horizontal and vertical directions Accuracy 0.01 mm Rotatable and movable clamping table, Collet & Engelhard, Offenbach Model Tdvmf 1.6 (for technical data, see ‘Clamping table’) Rotatable and movable clamping table from Scharmann, Rheydt Model DAV 1600 Rotatable and movable clamping table from Froriep, Rheydt Swivel crane for tool change, maximum load capacity 500 kg Fpodpfx Adsxdnrae Nep Special tools Carbide core drill bits for extracting core samples Universal facing and boring head from Wohlhaupter, Frickenhausen Model UPA7, with the following specifications: 1 division of the fine adjustment 0.01 mm in diameter 1 revolution of the fine adjustment 0.5 mm in diameter Facing and boring range 0 - 1250 mm Maximum slide adjustment 210 mm Automatic slide feed in mm/rev during facing 0.05 - 0.10 - 0.15 - 0.20 - 0.25 - 0.30 - 0.35 - 0.40 - 0.45 - 0.50 - 0.55 - Quick adjustment per revolution of the quick adjustment spindle 6 mm in diameter Largest diameter of the slide at zero position corresponds to the smallest drilling diameter of 323 mm Head height without shaft 260 mm

Condition: used, Year of construction: 1987, max. wheel diameter 150 mm gear width . mm max. module 5 min. module 0,5 Control . total power requirement . kW weight of the machine ca. 10.000 t Fedpfxewhq Afj Ad Njpp dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, General Data Machine weight 6000 kg Fpedpfxjxrwhyj Ad Nsp Main Drive Number of axis 3 Media Main electronic connection 40 kVA Additional Equipment shopturn option This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2015, swing diameter 420 mm chucking diameter 400 mm x-travel 900 mm z-travel 495 mm spindle tunring speed 3.100 U/min number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Fpodpfxswqr S To Ad Nop Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: new, The VHF 1.1 is a compact and versatile Conventional Vertical Milling Machine in the Universal Milling Machines category, designed by KNUTH. This universal milling machine boasts a robust frame made of vibration-dampening cast iron, ensuring stability during operations. Equipped with a horizontal spindle and a swiveling vertical milling head, the VHF 1.1 allows for infinitely variable spindle speed and feed on the X-axis, making it ideal for diverse applications in training departments, repair shops, and model-making workshops. Its 1.000 x 240 mm setup area and 535 mm travel on the X-axis facilitate various machining tasks, while the included coolant system and chip tray enhance functionality and cleanliness. Users benefit from the extensive standard equipment, which includes a 3-axis position indicator, drill chuck, reducing sleeves, and more. With its precise and powerful performance, the VHF 1.1 is an outstanding choice for anyone in need of a reliable milling machine. Don’t hesitate to request a quote and elevate your milling capabilities today! Fodpfxeuyh Egs Ad Nepp

Condition: good (used), Year of construction: 2004, Steuerung: Siemens 840-D Verfahrweg X: 6000 mm Verfahrweg Y: 3000 mm Verfahrweg Z: 1000 mm Verfahrweg W: 700 mm Spindeldurchmesser: 150 mm Spindeldrehzahl: bis zu 2800 U/min Spindelleistung: 51 kW Werkzeugwechsler: 80 Werkzeuge Vertikalfräskopf Fpedexn R Ncepfx Ad Njp CNC-Rundtischgröße: 2000 x 2500 mm Tischverfahrweg V: 1500 mm Tischtragkraft: 25 t 2 Stück Bodenplatten Späneförderer Automatischer Kopfwechsler KF-D4 vertikaler Einachsen-Fräskopf, 2,5° programmierbar

Condition: excellent (used), Year of construction: 2012, Information will follow… Fpsdoxtfu Repfx Ad Nop

Condition: used, Year of construction: 1988, max. wheel diameter 150 mm Fodpfx Aswhq Easd Nopp gear width . mm max. module 5 min. module 0,5 Control . total power requirement . kW weight of the machine ca. 10.000 t dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Fpsdpfxsxpww Ao Ad Nep Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. tool taper Capto C5 Fedpfx Adoxq Hkzj Nepp max. workpiece diameter 50 mm max. workpiece weight 0,5 kg x-axis 450 mm z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: new, The Mark Super S, part of the Conventional Vertical Milling Machines category, excels as a mill drill with robust capabilities. This versatile machine is perfect for a wide array of applications, including drilling and milling of steel and non-ferrous metals. With its motorized cutter head movement and hand-wheel for precise positioning, the Mark Super S ensures that you can achieve accurate results every time. It features an infinitely variable feed on the X-axis, coupled with an automated drilling feed and a clear digital depth display for ease of use. The swiveling head allows for extensive maneuverability, while the gearbox milling head delivers powerful machining capabilities. Enhanced productivity is assured with dual gear steps for high torque, a 3-axis position indicator, and an intuitive operator interface. Even after 15 years of popularity, the Mark Super S remains a top choice for workshops and educational settings. Request a quote today to explore the advantages this mill drill can bring to your operations. Fodpeqcuc Tefx Ad Nopp

Condition: new, Year of construction: 2022, Drilling depth 170 mm Drilling width 250 Speed 2800 rpm HOLZKRAFT long hole drilling machine LLB 30 Entry level long hole drilling machine with single hand lever, eccentric clamp, dowel drilling device and drill head height adjustment with handwheel and numerical display for fast and precise working working table (LxW): 580 x 300 mm drilling width: 250 mm drilling depth (at 90°): 170 mm drill head height adjustment: 200 mm working table rotation range: not rotatable tool holder: WESCOTT drill chuck Fjdpfxoih H A Rs Ad Njpp tool clamping range: Ø 0 - 20 mm spindle speed: 2.800 min-1 motor power: 2,2 kW | 400 V - 50 Hz suction nozzle: Ø 70 mm dimensions (LxWxH): 1500 x 920 x 1400 mm Weight (net): approx. 160 kg Including dowel drilling device, eccentric clamp, numerical display height adjustment, Wescott drill chuck 0-20 mm HOLZKRAFT LLB 30 slot drilling machine - entry-level machine for professional slot drilling - Made in EU Easy operation via one-hand lever for fast and precise work Drill head with hardened prism guides and bearing with ball contact system Drill head height adjustment with hand wheel and numerical display Manual eccentric clamp Sturdy cast steel construction Powerful three-phase motor Dowel device with grid position 16 | 22 | 27 | 32 mm Clamping stops allow easy and quick adjustment of the drill head run Scope of delivery HOLZKRAFT LLB 30 slot mortising machine Drill head height adjustment with hand wheel and numerical display Dowel drilling device with grid Eccentric clamp Wescott drill chuck 0 - 20 mm Instruction manual with exploded views, spare parts lists and CE- Declaration of Conformity Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1989, max. wheel diameter 150 mm max. module 5 min. module 0,5 Fodswhq Egepfx Ad Nepp weight of the machine ca. 10.000 kg dimensions of the machine ca. 6500x 2700x 3600 m

Condition: used, Year of construction: 2012, turning diameter 140 mm turning length 630 mm control Siemens 840 SL max. swing diameter over bed 250 mm turning speed range - main spindle 0 - 5000 min/-1 max. torque 256 Nm spindle bearing diameter 110 mm spindle bore 52 mm spindle head Gr. 6 DIN 55026 chucking diameter max. 250 mm number of tool places 3 x 12 Pos. tool taper VDI 40 max. tool weight 20 kg max. tool diameter 40 mm max. tool length 95 mm max. workpiece weight 20 kg max. workpiece diameter 140 mm x-travel 300 mm z-travel 740 mm rapid traverse x 45 / z 30 m/min total power requirement 70 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 6,5 x 3,5 x 4,4 m In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale! Fodoxqrgzjpfx Ad Nopp

Condition: like new (used), Year of construction: 2018, Panhans Mortising Machine Type: 116/10 - Max. drilling depth: 145 mm - Max. drilling length: 240 mm - Height adjustment: 135 mm - Extraction nozzle diameter: 100 mm - Color: RAL 7035 Light Grey, RAL 5000 Violet Blue - Net weight approx. 200 kg Robust German engineering Professional long-hole mortising and precise dowel drilling Fixed table, smooth-running mobile drill motor Mobility kit for increased flexibility Fedpfjxgu Tvex Ad Nopp Cast iron table 700 x 380 mm, thick-walled and highly ribbed Smooth, backlash-free cross-slide with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length restriction via adjustable side stops left and right Drill motor output 1.3 kW/1.8 HP with motor brake and convenient tool tray Including emergency stop button High-precision three-jaw drill chuck, clamping range 5 – 20 mm Dowel drilling system for row drilling with indexing roller: 16, 22, 25, and 32 mm, high-precision machined indexing, fixing via spring-loaded indexing bolt Detachable frame stop with index pin for positions: center, left, right CE-compliant GS certified Including additional special accessories: - Single-lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 1986, max. wheel diameter . mm Fodpfxjucgw De Ad Nepp gear width . mm max. module . weight of the machine ca. 7 t

Condition: new, Year of construction: 2024, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm Fedpfx Ador Eli Tj Nspp -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1986, max. wheel diameter 150 mm max. module 5 min. module 0,5 weight of the machine ca. 10.000 t Fodpfxjucgw Re Ad Njpp dimensions of the machine ca. 6500 × 2700× 3600 m

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Fpsdpjv Trlmjfx Ad Nop Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee