Used Vertical Machining for sale (66,457)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting range at 90° (round): 530 mm Cutting range at 90° (flat): 530 × 800 mm Cutting range at 45° (flat): 530 × 520 mm Cutting range at 30° (flat): 530 × 320 mm Cutting angle: 45° - 0° - 60° Blade speed: 20–120 m/min Feed length: 1,500 mm MACHINE DETAILS Saw motor power: 3.0 kW Coolant pump: 100 W Hydraulic pump: 370 W Power connection: 400 V / 50–60 Hz Dimensions & Weight Dimensions (L × W × H): 2,500 × 4,000 × 2,500 mm Total weight: 3,500 kg EQUIPMENT Machine stand with chip collection tray Hydraulic cutting pressure control Stepless blade speed control Hydraulic guide arm adjustment Minimum quantity lubrication Crsdpfx Aaszyccxe Hog Automatic shutdown at the end of the cut Chip brush Hydraulic miter adjustment Hydraulic clamping device Hydraulic blade tensioning Operating manual

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Cedpfxjzqunho Aa Herg Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1162068, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Cjdpfjzr H Tljx Aa Herg Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping 5 off BT40 toolholders Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between September 21st and October 1st! TECHNICAL DETAILS Travel in X-axis: 1,350 mm Travel in Y-axis: 620 mm Travel in Z-axis: 810 mm Feed rate and rapid traverse Feed rate X/Y/Z-axis: 15 m/min Rapid traverse X/Y/Z-axis: 30 m/min Spindle Spindle speed: 12,000 rpm Spindle drive power: 10 kW (100% ED) Spindle drive power: 12 kW (40% ED) Spindle mounting: ISO 40 Spindle bearing diameter (front): 70 mm Spindle bearing diameter (rear): 60 mm Spindle operating hours: 6,510 h Distance from spindle to table: 90 – 900 mm Distance from spindle center to machine frame: 655 mm Tool magazine Tool magazine capacity: 40 Max. tool length: 300 mm Max. tool diameter with occupied neighboring positions: 80 mm Max. tool diameter with free neighboring position: 125 mm Work table Table length: 1,550 mm Table width: 620 mm Number of table slots: 6 Control system Control system manufacturer: HEIDENHAIN Control system model: iTNC 530 MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 63 A Rated apparent power: 35 kVA Dimensions and weight Overall length: 7,000 mm Overall width: 2,700 mm Overall height: 2,900 mm Machine weight: 8,650 kg EQUIPMENT - Dividing head, 4th and 5th axis, manufacturer WALTER, type TANIH 200 - LANG 5-axis clamping system Codpfszqunujx Aa Horg - RENISHAW measuring probe - Chip conveyor - Documentation and manuals External reference: Wahl - Lot 69 Note: without the machine vice located on the clamping surface.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, empty load weight: 13,000 kg, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 1,100 mm Travel range, Z-axis: 500 mm C-axis rotation: 360° Tool magazine slots: 32 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Dry weight: 13,000 kg Transport packages: 3 pcs. Cjdpozxckmofx Aa Herg EQUIPMENT Documentation CE marking

Condition: repair required (used), Year of construction: 2008, operating hours: 29,835 h, functionality: not functional, machine/vehicle number: 2337752, Equipment: chip conveyor, The CNC machine is exhibiting the following error: program execution with two tool changes. Up to that point, it ran without any problems. Then, at one point, the second tool change was not performed; instead, the error message "tool changer home position missing" appeared. The auxiliary function and rescue function are not working. Instead, the following error messages appear: "tool holder not open," "tool holder not closed," "tool changer home position missing." After switching on and starting up, the spindle cannot rotate (without compressed air, it can be moved slightly, but it is very difficult to move). After consulting with DMG Mori, it is possible that the pneumatic cylinder used to hold the tool holder is defective, or the spindle itself. Here are the key specifications: DMG DMC 835 V, manufactured in 2007 Main spindle: 10,000 rpm, SK 40 tool holder Working area: X 835 mm, Y 510 mm, Z 510 mm Magazine capacity: 20 tools Work table: Clamping area 1000 x 560 mm Distance between T-slots: 100 mm Load capacity (center): 800 kg (approx.) Table height from the floor: 720 mm Codozx A Tbjpfx Aa Hsrg Equipped with Heidenhain 530 Operating hours: Control on: 29,835 / Machine on: 28,258 / Program execution: 10,067 / Tool changer: 1,066 In addition, we also have a chip conveyor, as well as various tool holders and milling tools (some of which are new or like new).

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: H-64094, travel distance X-axis: 1,630 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, controller model: Ultimax, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,630 mm Travel range, Y-axis: 860 mm Travel range, Z-axis: 760 mm Spindle speed: 10,000 rpm Working area: 1,676 x 889 mm Load capacity: 2,722 kg Max. tool diameter: 75 mm Max. tool diameter with free adjacent tool positions: 127 mm Max. tool length: max. 300 mm MACHINE DETAILS Control system: Ultimax Tool positions: 40 Crjdpfjzx N Thjx Aa Hjg EQUIPMENT Spindle cooling Chip conveyor

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Cedpfxoziu Hzo Aa Herg Inspection welcome

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Codpfxey St Sde Aa Herg Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 016-018828-450, SPECIFICATION Table 914mm x 500mm X axis traverse 830mm Y axis traverse 530mm Z axis traverse 580mm Spindle nose to table 115-695mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 22.4kW Rapid feed rate 30m/min Toolchanger capacity 30 tools Approximate weight 5800Kg   MACHINE EQUIPPED WITH: - Crodpoxzqq Tofx Aa Hog Siemens 828D CNC Control Renishaw probe 15 0ff BT40 toolholders Coolant system Lighting Guarding

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured Codpfx Aajd I R E No Hsrg • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Codpfxozi Awhs Aa Horg Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, spindle speed (max.): 7,500 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, Haas VF1 Vertical Machining Centre,2011, table 660 x 356mm, trav 508 x 406 x 508mm, bt40, 20atc, 7,500rpm, rigid tapping , Liquid cooled, Chip conveyor Crodpjzwuryefx Aa Hjg

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control unit (PCU 50) was replaced in March 2024! The machine spindle was replaced at approximately 5,500 operating hours! Tools are included in the offer! TECHNICAL DETAILS Crjdszvl Tfjpfx Aa Hsg Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control unit: Siemens 840 D Operating hours Control unit operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling 20 bar with double switching filter Documentation Hedelius + Siemens Sinumerik Infrared probe Renishaw Note: The sale does not include the milling attachments on the rear panel of the machine. Since the machine has been demonstrated several times, the machine operating hours may vary slightly.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Crjdpfxjt Dmlfo Aa Heg Lighting Enclosed Guarding

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, SPECIFICATION Travel X axis stroke 762mm Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Length 914mm Max. Weight on table 1361kg T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Crodpfxjwx I N Do Aa Heg Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,450 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, DAHLIH VERTICAL MACHINING CENTRE MODEL MCV 1450 CONTROL FANUC 50 TAPER SPINDLE THROUGH SPINDLE COOLANT TABLE SIZE 1600 X 800 TRAVELS - 1450 X 750 X 750 MM TABLE LOAD 2000 KGS GEARED HEAD SPINDLE MOTOR 15 KW ATC Crodpsznm Uuefx Aa Hjg MACHINE WEIGHT 14.5 TON

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Cedpexc I Dgsfx Aa Hsrg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, HURCO VM10i VERTICAL MACHINING CENTRE Year: 2015 Axis X 660 mm Axis Y 406 mm Axis Z 508 mm Rotary table (4th axis) no Type of CNC Table length 762 mm Table width 406 mm Max. part weight 340 kg Cedpfx Aezwwndoa Hjrg Number of tool pockets 20 Spindle taper Max. spindle speed 10000 rpm Spindle motor power 11 kW

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 40, Hedelius BC 80 This machine was primarily used for pre-milling operations at our facility until January and is currently out of service due to a hard drive malfunction. It has a Heidenhain control system, and the 4th axis is prepared but has never been installed. Cedpfx Aaozx Ecxo Herg The drives were functioning without any issues; however, the spindle makes noise at higher speeds. As we need the space for our assembly operations, we are offering the machine for sale. Our asking price, ex works, is 6,000.00 Euros.

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Spindle BT 30 Spindle 3hp Crodezu Ni Uopfx Aa Hjg 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, torque: 600 Nm, controller manufacturer: fanuc, controller model: 18, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 600 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 1,500 kg, total height: 3,500 mm, total length: 5,000 mm, total width: 6,000 mm, table width: 700 mm, table height: 600 mm, table length: 1,400 mm, table load: 1,500 kg, overall weight: 9,000 kg, spindle speed (max.): 6,000 rpm, coolant supply: 25 bar, distance table center to spindle nose: 600 mm, spindle motor power: 26,000 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Sold with a 380/220 transformer; the machine actually operates at 220. Incoterm EXW Torrelavega (Spain). The machine is sold as is, in its current installed location. Disassembly, handling, loading, transport, insurance, and any necessary permits will be the responsibility and risk of the buyer. Cedpfozxzvhex Aa Horg

Condition: like new (used), Year of construction: 2016, operating hours: 3,641 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, table load: 2,000 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,641 h, spindle motor power: 20,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, Equipment: documentation/manual, This HERMLE C400 is in like-new condition and has seen very little use, with only 3641 spindle hours. The machine comes from a repair/prototype workshop and was primarily used to machine plastics and aluminum. The machine is located in our showroom and can be inspected while running! Cedpfx Aezyq Eboa Herg Additional options & accessories: - Air through the spindle. - Heidenhain TS460 measuring probe. - Electronic handwheel. - Approx. 20 HSK-A63 tool holders (in the tool changer). - Manual cabinet roof. - Preparation for mist extraction system. - Coolant gun. - Original HERMLE + Heidenhain documentation. Weight & dimensions: approx. 10,000 kg

Condition: good (used), Year of construction: 2004, operating hours: 16,651 h, functionality: fully functional, machine/vehicle number: M342-06204054DFA, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, feed length X-axis: 760 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 18 kVA, torque: 236 Nm, controller manufacturer: Hurco, controller model: Ultimax 4, workpiece length (max.): 1,020 mm, workpiece width (max.): 510 mm, workpiece height (max.): 610 mm, workpiece weight (max.): 750 kg, total height: 2,700 mm, total length: 280 mm, total width: 2,300 mm, table width: 510 mm, table height: 850 mm, table length: 1,020 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 4,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 6 bar, spindle nose: Steilkegel Gr. 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Excellent condition: Hurco VMX 30 with extremely low operating hours! For sale is a very well-maintained, vertical 3-axis machining center, a Hurco VMX 30, manufactured in 2004. The machine is in exceptionally good condition for its age. As can be easily seen from the operating hours, the machine has only been used very little by us. It was used exclusively for light-duty operation/toolmaking and was not subjected to heavy series production. The mechanical components (guideways, ball screws, and spindle) are correspondingly only slightly worn and offer high precision. The machine is equipped with the popular Ultimax 4 dual-screen control system, which is highly regarded worldwide for its extremely fast and easy dialog programming directly on the machine. Cedpfozudd Tox Aa Hsrg

Condition: excellent (used), Year of construction: 2020, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: 1172799, spindle speed (min.): 15,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Haas UMC-750 5 Axis Vertical Machining Centre with Haas CNC Control, 630mm x 500mm Table, Travels X Axis 762mm, Y Axis 508mm, Z Axis 508mm, Through spindle coolant, C Axis 360deg Rotation, B Axis -35deg to + 100deg, High speed machining enabled Spindle Speed 12,000rpm, 40 Tool ATC 2020 machine , BT40 Spindle Taper, Swarf Conveyor, Coolant System. S/No. 1172799 Codpfx Aajx Uznfe Hsrg Wireless probing.