Used Vertical Jig Boring Machine for sale (67,054)

Condition: defective spare-parts repository (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 30038908, overall weight: 15,700 kg, We are selling a damaged machine that requires repair – sold as is, without warranty: Machine: Hedelius Tiltenta – CNC machining center – T7 Magnum 1R 40/530/3200/12 Year of manufacture: 2016 Serial number: 30038908 Weight: approximately 15.70 tons Damages (not a complete list): Ball screw of the X-axis is defective, including bearing, adjusting nut, timing belt, and 2 x adjusting nut KGT. Disc spring package on the fixed stop of the X-axis is defective. Dwedjzy U Ruspfx Aaxsb Hood of the HSA spindle is defective. Machine terminal is defective. MC screen/hard drive is defective. Slight deformations on the chip conveyor and compression on cable connections. The connecting lines of the terminal are defective and must be completely replaced. The tension bolts of the catching device of the Z-axis must be replaced. The machine geometry can only be measured after the machine has been electrically repaired. Any further damage to the geometry can only be recorded and determined afterward. The energy chain must be replaced. Length approx. 1,400 to 1,500 mm. Whether the Sauter swivel head was damaged during transport can only be determined during commissioning. The vertical slide of the Z-axis is defective and must be replaced. The left door must be straightened. Welding work may be required on the guide. Door switch and emergency stop chain must be checked during commissioning. Straightening work may be required at the pick-up station, as the terminal collided with it. The linear measuring system (LMG) of the X-axis is defective and must be replaced. The machine is sold in its damaged condition as a damaged object requiring repair without any warranties! The machine must be picked up within a short period, no later than week 39, otherwise storage costs will be charged. Sale basis: loaded onto a truck at the Spieß location, 61276 Weilrod Storage costs: from 21.09.2026, to be borne by the buyer.

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Dsdpfx Ajziu Hzsaxowb Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Condition: used, machine/vehicle number: 52 / 519, spindle diameter:90 mm x-travel:700 mm distance between columns:900 mm size of table:770 x 900 mm x-Travel:700 mm y-travel:500 mm z-travel:1100 mm feed range - table:15 - 280 mm/min rapid traverse Z-axis:530 m/min spindle bore diameter / taper:MT4 (Morse) mm spindle bore diameter:max. 230 mm spindle stroke - max.:170 mm spindle speeds low range:10 U/min spindle speed high range:2000 U/min vertical feeds of spindle head::0.02 - 0,2 mm/r Dwedpfx Aajh Ra Stsxjb feed steps:6 Main spindle capacity:3 kW total power requirement:4,2 kW weight of the machine ca.:4 t dimensions of the machine ca.:1,9 x 2,2 x 2,4 m Hauser (SIP) High Precision Co-ordinated Jig Boring Machine, Model - M5 Douple Column Design Boring machine Large table (900 x 770 mm) for bulky Objects. All Axis are equipped with Fine Dial for High Presion Boring. A Complete Accesseries and tools are Avilable with the machine ( Drill Bits, Drill Chucks, Multiple Boring heads, Boring Inserts and Bits, Small and large rotary index table for small and big loads).

Condition: used, Year of construction: 2008, XYZ SMX 5000 CNC Vertical Turret Milling Machine With Prototrak SMX Control Dwedpfjzvp E Eox Aaxsb Table Dimension 1,930 x 355mm (4 'T' Slots). Maximum Table Load 850kg. Axis Travel 'X'=1,524mm, 'Y'=596mm, 'Z'=520mm. Quill Ø116mm. Quill Travel 127mm. Spindle Nose to Table 620mm. Spindle Centre To Column Face 520mm. Speed Range 40-5,000rpm (7.5kW Motor). Spindle Taper ISO40. Power Drawbar. S/No. 11100 (2008). With Coolant System, Table Guarding, Work Light, Vertex Heavy Duty Vice (Jaw Width 205mm), Indexing Head 3 Jaw Chuck 200mm, Centre Height 170mm, 8 Drawer Steel Cabinet With Contents Of Spindle Tooling & Clamp Sets. Approx Overall Dimensions L5,805 x W3,143 x H2,690mm. Weight 3,100kg. Note: Machine Had Control Upgrade 2023.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, spindle speed (max.): 2,000 rpm, table length: 1,100 mm, table width: 842 mm, X axis: mm 1.000 Y axis: mm 700 Spindle travel: mm 300 Table dimensions: mm 1.100 x 842 Dwodpfozizgbox Aaxeb Spindle speed: rpm 40 – 2.000 Spindle cone: MT 4 Max power: kW 10 Max loading on table: ton 1 Machine weight: ton 15 EQUIPPED WITH A LOT OF ACCESSORIES

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: H-64094, travel distance X-axis: 1,630 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, controller model: Ultimax, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,630 mm Travel range, Y-axis: 860 mm Travel range, Z-axis: 760 mm Spindle speed: 10,000 rpm Working area: 1,676 x 889 mm Load capacity: 2,722 kg Max. tool diameter: 75 mm Max. tool diameter with free adjacent tool positions: 127 mm Dwsdpfx Aszx N Theaxob Max. tool length: max. 300 mm MACHINE DETAILS Control system: Ultimax Tool positions: 40 EQUIPMENT Spindle cooling Chip conveyor

Condition: used, Year of construction: 2005, machine/vehicle number: 660093, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. Dedpfx Aaszy Ukbsxowb For sale is a vertical machining center from the manufacturer OPS INGERSOLL, model: OPS 600. MACHINE DETAILS Operating voltage: 400 V 3~ Frequency: 50/60 Hz Control voltage: 24 V DC Current consumption: 22 A Pre-fuse: max. 32 A

Condition: repair required (used), Year of construction: 1991, operating hours: 40,000 h, functionality: limited functionality, machine/vehicle number: 109-43, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 4,000 m/min, feed rate Z-axis: 4,000 m/min, nominal power (apparent): 13 kVA, torque: 35 Nm, controller manufacturer: Fanuc OMB, controller model: 9030556, workpiece length (max.): 220 mm, workpiece diameter (max.): 65 mm, total height: 2,600 mm, total length: 2,800 mm, total width: 1,800 mm, table width: 370 mm, table height: 900 mm, table length: 950 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 615 mm, number of slots in tool magazine: 12, input voltage: 380 V, Equipment: chip conveyor, rotational speed infinitely variable, Chiron Fz 12 S, year of manufacture 1991. Additional indexing device. Currently with a measurement system error on the B-axis. The machine can be inspected at any time during regular opening hours. Dodpjy R Dqhofx Aaxswb

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, The PR622F4 is a specialized CNC horizontal boring machine developed and manufactured by the St. Petersburg-based TBS Machine Tool Plant. This heavy-duty machine is designed specifically for the needs of railway transport and transport engineering. It is intended for high-precision machining of key and critical rolling stock components. Thanks to specialized equipment, one such complex replaces a production line of 12 obsolete machines. WorkpiecesThe machine is used to process technological and operational surfaces of the following units:Axlebox housings and bolstersHousings, locks and lock holders of automatic couplingsNon-rotating shoes and safety devicesTraction clamps and centering beamsSide frames of freight trolleysDesign featuresHigh precision: the movements of moving units are controlled by precision feedback sensors along the X, Y, Z and W axes.Rigidity and stability: reliable hydraulic clamps ensure that the units are fixed in specified positions.Combined guides: sliding pairs (cast iron-TsAM/fluoron) are used along the X and Y axes together with hardened steel lateral rolling bearings.Precision ball screws: high-quality ball screws are used for smooth and precise linear movement of the units transmission. Rotary table (B axis): equipped with an automated precision stop system at positions 0, 90, 180 and 270 degrees. Protection of units: telescopic covers completely cover the bed guides from chips and dirt. Technological equipment For the implementation of complex technological operations, the PR622F4 machine is supplied with a specialized kit: Hanging faceplate, Hollow spindle extension, Special clamping devices for fixing automatic coupling housings and side frames of bogies, Sets of cutting tools and mandrels for specific parts Dedpfx Aszr H T Esaxewb

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Djdpfx Aaow U Sf Texowb Spindle taper BT40, 24 station ATC

Condition: used, Year of construction: 2019, operating hours: 6,744 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 18,000 m/min, feed length X-axis: 1,016 mm, feed length Y-axis: 660 mm, feed length Z-axis: 630 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, feed rate Z-axis: 12,700 m/min, nominal power (apparent): 45 kVA, torque: 460 Nm, controller manufacturer: Haas, controller model: Haas, workpiece length (max.): 1,370 mm, workpiece width (max.): 610 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 1,814 kg, total height: 630 mm, total length: 1,370 mm, total width: 660 mm, table width: 610 mm, table height: 630 mm, table length: 1,372 mm, table load: 1,814 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,454 h, spindle motor power: 44 W, number of slots in tool magazine: 30, Equipment: chip conveyor, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Buy both machines together for €125,000. Excellent opportunity for a complete Haas machining package. • Haas VF-3YT/50, 2019. • 10,000 rpm original high-performance spindle, 44.7 kW, vector drive, gearbox • 2-speed gearbox • ISO 50 tool holder • 30 ATC (Automatic Tool Changer) • Chip conveyor with 4 additional lead screws Dwedjzc Ni Sspfx Aaxeb • RTAP-3 – Synchronized threading without expensive holders with compensation • TSC 300 psi (21 bar) • Coolant chiller • Programmable coolant nozzle • MIN QTY LUBE • Automatic air gun • TAB – air cooling through the spindle • Renishaw WIPS – measuring, scaling, rotation • High-speed machining • ACF 25-micron filter • Electrical cabinet cooler • Mist condenser • 4th-axis pre-wiring • DWO/TCPC • WIFI connection to local network • WIFI camera • Automatic door • 15 tool holders • 4,454 hours of cutting (Spindle On Time) • 6,744 hours of cycle time The machine is powered on and available for inspection at any time. Complete documentation available. Original paint, no accidents, no crashes. Regularly maintained machine. Immediate availability.

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes Dwsdod I R E Njpfx Aaxob • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, machine/vehicle number: 97-VP461, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 350 mm Spindle speed: 20,000 rpm Tool changer positions: 30 MACHINE DETAILS Control manufacturer: Fanuc EQUIPMENT Dsdpfxjyi U Iae Aaxjwb BT 40 Big Plus tool holder 4th axis table Oil mist minimum quantity lubrication system

Condition: excellent (used), TBT T30 SERIES TABLE TYPE GUN DRILLING MACHINE Model T30-1000KTN Serial number 410.364.016 Year of manufacture, approx. 1980 Number of spindles 1 Drilling range in steel 4 - 30 mm (solid) Counter boring 40 mm Nominal drilling depth 1000 mm Slotted table size 850 long x 750 wide mm Table size overall 1100 long x 1000 wide mm Table cross movement 800 mm (approx.) Table vertical movement 400 mm (approx.) Drilling slide longitudinal travel 1450 mm Slideway width 250 mm Spindle speeds to approx. 9000 rpm Spindle motor 25 kW Total load 41 kW Supplied with: Dwjdpfx Aaozuxp Rexeb 2 off Whip guides. Ballscrew feed. 2 Axis DRO to table Cross and Vertical, DRO to drill slide. TS25-1000 Coolant tank. Drill bushes. For Sale with Jet Machinery Ltd Jet Machinery Stock No: #27033 Machine Serial Number: 410 364 016 Cost: £17,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min Dwjdpfx Aev A S Efeaxjb feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display *

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, spindle speed (max.): 7,500 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, Haas VF1 Vertical Machining Centre,2011, table 660 x 356mm, trav 508 x 406 x 508mm, bt40, 20atc, 7,500rpm, rigid tapping , Liquid cooled, Chip conveyor Dwsdpfx Aaezwuryjxjb

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm Djdpfx Aex D Tbmjaxjwb 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2016, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 19979, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 40 mm, feed length Y-axis: 40 mm, feed length Z-axis: 40 mm, nominal power (apparent): 75 kVA, torque: 191 Nm, controller manufacturer: Fanuc, controller model: G-Tech 31 iB, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 450 mm, workpiece diameter (max.): 850 mm, workpiece weight (max.): 500 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 90 bar, number of spindles: 1, number of slots in tool magazine: 60, mount diameter: 40 mm, tool length: 350 mm, tool diameter: 80 mm, tool weight: 10,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MX-850 Milling Machine – Year of Manufacture 2016 – Excellent Condition For sale is a reliable and high-performance MX-850 milling machine from 2016. The machine is in good, well-maintained condition and is fully operational. With approximately 14,000 operating hours, the machine has been regularly serviced and professionally used throughout. Particular mention should be made of the spindle, which runs exceptionally smoothly and is almost like new—ensuring precision and high machining quality. The MX-850 stands out for its robust construction, high accuracy, and versatile applications in daily production. It is ideal for a wide range of milling operations and perfectly suited for both single and series production. Equipment & Details: Dwjdpfx Asy Dd Exoaxjb - Model: MX-850 - Year of manufacture: 2016 - Operating hours: approx. 14,000 h - Condition: good - Spindle: excellent run, nearly as new - Function: perfectly operational, ready for immediate use - Coolant system (Knoll) included - Chip conveyor included - Transformer included Scope of delivery note: The machine is sold without tools, holders, or LANG clamping system – only the machine itself and the above-mentioned peripherals are included. The machine has always been handled with care and regularly maintained. It is currently still in operation and can be inspected by appointment. If you are interested or have further questions, please feel free to contact us.

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Dwodpsyx U Nwofx Aaxjb

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z: 2134 x 813 x 762mm, Table 2134 x 711mm, Spindle Speed 0 – 8,100 rpm, Spindle taper BT40, Spindle Motor 30Hp, HAAS Control, Djdpfxszzppue Aaxswb 30 Station ATC, coolant, WIPS, low volt light, and 4th axis.

Condition: used, Year of construction: 1999, machine/vehicle number: 17, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a vertical internal stripping machine manufactured by FORST, model: RISH 6.3 x 1000xx 320 M. TECHNICAL DETAILS Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Control voltage: 230/240 V AC Control frequency: 50 Hz Dsdpfxezy Ulro Aaxswb Control current: 6.3 A Machine rated current: 180 A

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Djdpfx Aasx Rhlcoxswb Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: used, XYZ 2-OP Compact Vertical machining Centre Dwjdpfx Aezu Ni Ueaxeb Year 2017 Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Spindle BT 30 Spindle 3hp 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Year of construction: 2016, condition: excellent (used), functionality: fully functional, We offer this Apollo SRL Macchine Utensili Modular 1 vertical head punching machine, type MB045161215, manufactured in 2016, in very good condition. Dwjdpfxozrpfke Aaxob If you have any questions or require further information, please contact us by email or phone.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm Dwedpfx Aod Amgkoaxsb TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports