Used Horizontal Boring Machine for sale (66,246)

Condition: used, Horizontal Boring Machine CORNAC C100 Travel X: 1000 mm Travel Y: 1000 mm Travel Z: 1260 mm Fixed table Cone: SA 50 Spindle: Ø 100 mm Spindle exit: 550 mm Rotation: from 10 to 1250 RPM Table size: 1550 x 980 mm Surfacing plate: Ø 520 mm Spindle motor: 9,5 kW Scale 3 axes HEIDENHAIN Automatic Feeds: X - Y - Z Supplied with a set of cones Predpfjzw Azpsx Adzja Voltage: 380 V Dimensions (L x W x H): 4500 x 2100 x 2450 mm Weight: approx 8 T

Year of construction: 1987, condition: ready for operation (used), A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available. Psdpfx Adjttv Uaszera

Condition: ready for operation (used), travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 4,500 mm, SKODA WD 160 A BORING MACHINE Spindle diameter: 160 mm X-axis travel: 7,000 mm Y-axis travel: 4,500 mm Z-axis travel: 1,200 mm B-axis travel (table): 360° W-axis travel (ram): 1,250 mm Rotary table: 2,000 x 2,000 mm - Maximum weight: 20 t - Longitudinal travel: 1,250 mm Pedpfx Ajzb H N Tjdzsra CNC: Fagor 8055 Electronic handwheel Spindle speed: 275 - 2,570 RPM Tool: ISO 50 2 x 90° square Universal and 90° head

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Prjdpsu Dahnofx Adzoa High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: Ob 21882, travel distance X-axis: 15,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,915 mm, spindle speed (max.): 700 rpm, total width: 6,400 mm, total length: 19,300 mm, total height: 10,370 mm, feed length W-axis: 3,000 mm, spindle diameter: 250 mm, table height: 400 mm, table length: 8,000 mm, table width: 5,665 mm, overall weight: 137,000 kg, year of last overhaul: 2006, grinding spindle motor power: 83,000 W, type of input current: three-phase, We offer for sale a Škoda W250H floor boring machine. This machine is designed for machining heavy and large-sized components for the energy, shipbuilding, metallurgical, mining, and machine production industries. The machine is equipped with a Siemens Sinumerik 840D control system, enabling the execution of demanding boring, drilling, and milling operations. Complete technical documentation is available. Upon request, we can provide additional photos, videos, and information regarding the machine's equipment and technical condition. Standard equipment: Tool and measuring instrument storage rack, mounted on the spindle box. Optional equipment: Cooling system with coolant Rotary table 4000x3550 Pedpfxszrwq Ij Adzera 3 x angular heads

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Pedpfx Aex Rhlcedzjra Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, table load: 10,000 kg, spindle diameter: 130 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 800 rpm, total height: 3,800 mm, total length: 7,030 mm, total width: 4,665 mm, table length: 1,800 mm, table width: 1,600 mm, type of input current: three-phase, overall weight: 30,000 kg, spindle motor power: 15,000 W, MTP TPX6113-2 HORIZONTAL BORING MACHINE Horizontal Boring Machine TPX6113/2 – Precision and Power for Heavy Machining The TPX6113/2 horizontal boring machine is a robust and efficient solution designed for precise machining of large and heavy workpieces. Thanks to its rigid construction and high technical performance, it is ideally suited for use in the mechanical, energy, and steel structure industries. The machine is equipped with a Ø130 mm spindle, ensuring high stability and enabling demanding machining operations. A powerful 15 kW main motor and high torque guarantee efficient performance even under heavy loads. The large worktable (1800 × 1600 mm) with a maximum load capacity of 10,000 kg allows machining of heavy components without compromise. The full table rotation (B axis – 360°) increases flexibility and enables multi-side machining without repositioning the workpiece. Psdpsy Eyg Uefx Adzora Technical Specifications: Spindle diameter: Ø130 mm Max spindle torque: 3136 Nm Max spindle feed force: 31,360 N Number of spindle speeds: 24 Spindle speed range: 4–800 rpm Main motor power: 15 kW Max facing head torque: 4900 Nm Facing head diameter: 750 mm Facing head speed range: 2.5–125 rpm Number of facing head speeds: 18 Table size: 1800 × 1600 mm Max table load: 10,000 kg T-slots: 28 mm × 10 Axis travels (X/Y/Z/W/U): 2000 / 1800 / 2000 / 900 / 250 mm Table rotation (B axis): 360° Rapid feed (X/Y/Z/W): 2500 mm/min Feed per spindle revolution (X/Y/Z/U): 0.05–8 / 0.01–2 mm/rev Measurement system accuracy (X/Y/Z): 0.005 mm (Z optional) Measurement system accuracy (B axis): 0.001 mm (optional) Dimensions: 7030 × 4665 × 3800 mm Machine weight: 29,300 kg

Condition: used, Year of construction: 1986, spindle diameter 1 mm Pedpfsylzv Aex Adzora x-travel 1 mm y-travel 1 mm total power requirement 1 kW

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Prsdoizxbispfx Adzja Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system Predpfxou U Hvwj Adzoa - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, can be carried out by us on request. We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. It can be connected and tested under power. Very good condition. X 11,500; Y 3,150; Z 2,000; clamping system M 100. Includes support column, 6 plates sized 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. Pjdpfjxwl Tbex Adzera This is a complete workstation. Weight approx. 200,000 kg.

Condition: good (used), BH35 1017 (for 35–58 mm) (Price: 2,590 EUR) Prjdpexvq A Sjfx Adzoa

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 65352, functionality: fully functional, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 170 mm, number of axes: 3, number of slots in tool magazine: 12, TECHNICAL DETAILS Milling spindle Number of controlled axes: 3 Tool holder: ISO 30 Motor power: 1.7 kW Drilling unit Drilling tool available: Yes Vertical drilling spindles: 10 pcs. Pjdpfx Aezuwt Isdzera Table and working area Type of milling table: Flat table Table length: 3,750 mm Table width: 1,560 mm Working area X-axis: 3,765 mm Working area Y-axis: 1,585 mm Working area Z-axis: 170 mm Z-axis travel max.: 324 mm Material clamping system: Pneumatic Tool changer and control Number of tool changer positions: 12 pcs. MACHINE DETAILS System/Software: BiesseWorks Vacuum pump Brand: Busch Type: MM1322AVM Capacity: 360 m³/h Connection diameter: 60 mm Oil-free: Yes Dimensions & Weight Dimensions (L x W x H): 5,600 x 2,250 x 2,550 mm Installed length: 6,465 mm Installed width: 4,794 mm Installed height: 2,550 mm Shipping weight: 2,500 kg Shipping packages: 2 pcs. EQUIPMENT Tools included Vacuum pump Busch MM1322AVM Safety mat CE marking

Condition: refurbished (used), Machine is located at our premises in Burscough. We welcome any inspections prior to sale. Spindle Diameter 4" / 101.6mm Spindle Taper 50 INT Main spindle travel 30" / 762mm Spindle speeds 10 - 1300rpm Vertical Y Travel - 48" / 1219mm Main Motor 25 HP Equipment - Predpfszwmrlox Adzoa Facing head, outer (tailstock) steady Vast amount of tooling, rotary table, angle plates. DRO Pendant control This machine has undertaken a full machine rebuild and all slides re ground. Exceptional condition

Condition: excellent (used), TBT T30 SERIES TABLE TYPE GUN DRILLING MACHINE Model T30-1000KTN Serial number 410.364.016 Year of manufacture, approx. 1980 Prodpfx Adozuxp Rszsa Number of spindles 1 Drilling range in steel 4 - 30 mm (solid) Counter boring 40 mm Nominal drilling depth 1000 mm Slotted table size 850 long x 750 wide mm Table size overall 1100 long x 1000 wide mm Table cross movement 800 mm (approx.) Table vertical movement 400 mm (approx.) Drilling slide longitudinal travel 1450 mm Slideway width 250 mm Spindle speeds to approx. 9000 rpm Spindle motor 25 kW Total load 41 kW Supplied with: 2 off Whip guides. Ballscrew feed. 2 Axis DRO to table Cross and Vertical, DRO to drill slide. TS25-1000 Coolant tank. Drill bushes. For Sale with Jet Machinery Ltd Jet Machinery Stock No: #27033 Machine Serial Number: 410 364 016 Cost: £17,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1998, Mori Seiki SH630 Horizontal Machining Centre Prodpfx Aszp Rftsdzsa Year 1998 Spindle speed - 10,000rpm CNC Control - Fanuc drives / Mori Seiki MSC control 4 Axis Table Length 630mm Table Load 1000kg Table Width 630mm Y axis travel - 760mm Z axis travel - 840mm X axis travel - 840mm Tool magazine with capacity for 60 tools 2 Tombstones Comes with Metal standing frame

Condition: used, Year of construction: 2022, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Colour: Grey Empty weight: 4.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: WoodFlash - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 Prsdpfjzwul Hex Adzea - Tools included: Yes - CNC options: Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2015, operating hours: 19,402 h, total height: 2,250 mm, total length: 2,500 mm, total width: 1,900 mm, Colour: White Empty weight: 1.600 kg Price: On request - Year: 2015 - Documentation available: Yes - └ Type Documentation: User manual, Electrical diagrams, Technical data, Operating system - CE marking present: Yes - CE certificate present: No - Serial number: AB/224221 - Operating hours: 19402 - Number of milling spindles [pcs.]: 1 Pedpszmvftefx Adzsra - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 1 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 5.6 - Type milling table: Flat table - Tool holder: ISO30 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 2.64 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 11 - Saw unit present: Yes - Tool changer positions [pcs.]: 0 - System/software: SCM Maestro - Safety feature: Door interlock switches, Safety light curtain - Tools included: Yes - CNC options: Barcode reader, Manual control - CNC documentation available: USB stick, User keys/licenses - Table length [mm]: 3960 - Table width [mm]: 840 - Working range X [mm]: 3050 - Working range Y [mm]: 900 - Z-axis working range [mm]: 60 - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 10.0 - Installed length [mm]: 4500 - Installed width [mm]: 1900 - Installed height [mm]: 2250 - Transport dimensions: 2500mm x 1900mm x 2250mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table Pjdpegvkmrofx Adzera equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: used, Year of construction: 2007, total height: 2,500 mm, total length: 11,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 7.200 kg Price: On request - Machine available from: 2026-06-24 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 97649 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 1000 Pjdpfey Ipntjx Adzera - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 9 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 18.5 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: No - Tool changer positions [pcs.]: 22 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 250 - └ Year of manufacture: 2007 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - Tools included: No - CNC options: EPS system, Offcut conveyor, Manual control - CNC documentation available: USB stick, User keys/licenses - Table length [mm]: 6200 - Table width [mm]: 1320 - Working range X [mm]: 6200 - Working range Y [mm]: 1535 - Z-axis working range [mm]: 275 - X-axis maximum stroke [mm]: 6820 - Y-axis maximum stroke [mm]: 1963 - Transport dimensions: 11000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2014, operating hours: 11,517 h, total height: 2,880 mm, total length: 10,000 mm, total width: 2,700 mm, Colour: White Empty weight: 6.000 kg - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Main motor power [kW]: 10 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes - └ Motor power [kW]: 3.6 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Enclosed fence, Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - └ Oil free: Yes - CNC documentation available: USB stick - Table length [mm]: 5150 - Table width [mm]: 1600 - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Transport dimensions: 10000mm x 2700mm x 2880mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Prjdpjx E Uk Usfx Adzsa Yorick Diebels

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Safety light curtain, Door interlock switches, Enclosed fence - Vacuum pump present: Yes Predpfxeytcl Is Adzoa - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1967, grinding length 450 mm grinding width 250 mm workpiece height 275 mm Prodpfx Adszwxxdezea table surface area 550 x 200 mm distance spindle center to table max. 400 mm table speeds 0 - 30 m/min cross feed 0 - 60 mm/Hub rapid traverse cross 1,2 m/min grinding wheel size ø 250 x 30 x ø 51 mm grinding spindle speed 1400 / 2800 U/min total power requirement 4 kW weight of the machine ca. 1 t dimensions of machine L x W x H 1,55 x 1,23 x 1,80 m Accessories: magnetic plate 450 x 200 mm, grinding wheel with flange, wheel trueing attachment

Condition: used, Year of construction: 1990, grinding length 900 mm grinding width 510 mm workpiece height 400 mm table surface area 800 x 400 mm longitudinal feed of the table max. 980 mm table speed -stepless- 1 - 35 m/min grinding wheel size 355 x 51 x 127 mm cross feed of the table 460 mm cross feed 1 - 40 mm/Hub vertical feed autom. 0,005 - 0,04 mm/Hub rapid traverse vertical 0,5 m/min Podpfx Adjtqqm Aozora grinding spindle speed 1450 U/min grinding spindle drive 5,6 kW table load capacity max. 1000 kg dimensions of machine L x W x H 3,2 x 2,17 x 2,47 m total power requirement 10 kW weight of the machine ca. 4,4 t Accessories: magnetic plate 800 x 400 mm, various grinding wheels with and without flanges, wet grinding attachment with paper band filter

Year of construction: 1994, condition: used, Manufacturer: IMA Model: K150/C Year: 1994 Type: Automatic cartoning machine with tuck-in closure Power: 3.5 kW Manufacturer's data capacity: 120 strokes/min Mechanical speed achieved in our workshops without products: 70 strokes/min Formats - A mini : 20mm - A maxi : 85mm - B mini : 12mm - B maxi : 60mm - C mini : 50mm - C maxi : 170mm Carton feeding: suction cup picking Product feed belt: cell chain Automatic inspection and rejection of non-compliant cartons Pjdpfx Asx R D A Rsdzjra Compressed air consumption: 183.5 Nl/min Dimensions depending on layout: diagram available in the photo gallery Weight: 1,400 kg Documentation and video in operation available