Used Horizontal Jig Boring Machine for sale (66,399)

Condition: used, Year of construction: 1986, spindle diameter 1 mm x-travel 1 mm Podpfxjylzv Aj Acvepp y-travel 1 mm total power requirement 1 kW

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Ppodpfxju Dahns Acvsp Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Ppodpfxox T Ddys Acvsp Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 1985, condition: used, machine/vehicle number: 16085001, Table size: 480 x 1200 mm Procedures x 650 mm Podpfx Acjb H D Idjvopp y: 420 mm w: 210 mm w (drill head height adjustment): 540 mm smallest/largest distance between table and spindle nose: 0/720 mm Throat depth: 450 mm Spindle retainer: System SF 32 Infinitely variable spindle speeds: 25-5600 RPM Spindle drive: 380 V, 6 kVA Approximate weight: 3 tons Space: 2000 x 2200 x 2300 mm

Condition: used, spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Control Heidenhain bore capacity in steel 40 mm Ppjdpfx Aoxwzg Rscvep spindle taper MK 4 bore spindle stroke 170 mm spindle turning speed - stepless 10-2.000 U/min ll diameter 230 mm table dimensions 900 x 770 mm vertical travel of crossrail-slide 630 mm boring spindle 6 Stück/ 0.02-0.20 U/min distance between columns 900 mm Passage between spindle and table 815 mm spindle drive 4 PS total power requirement 380 V weight of the machine ca. 3,9 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Year of construction: 1977, condition: used, x-travel 520 mm y-travel 400 mm z-travel 450 mm spindle taper ISO 40 control TNC 360 dimensions of the machine ca. 2450x2300x3300 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Ppodpfx Aoyutrbecvsp possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm Ppedpfjym T Hvjx Acvjp distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Pedpfxeizxbij Acvopp Automatic hydraulic locks in all movements.

Condition: used, Year of construction: 1956, spindle diameter 120 mm x-travel 1200 mm Pedpfoyqu R Rox Acvepp y-travel 600 mm z-travel 600 mm turning speeds 19-1900 U/min table-size 600x1200 mm table load 2000 kg spindle taper ISO 50 Feed 0,042-1,46 mm/U weight of the machine ca. . t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, SIP 600 – Precision Coordinate Boring Machine Accuracy Positioning accuracy on X and Y axes over the entire travel: 0.003 mm Capacity Table travel (X axis): 1000 mm Slide travel (Y axis): 700 mm Vertical quill travel: 300 mm Vertical crossrail travel: 780 mm Distance between uprights: approx. 1100 mm Max. distance spindle nose to table: 1000 mm Table Usable table surface: 1100 × 842 mm Maximum load capacity: 1500 kg Feed rates: 1 – 1000 mm/min Rapid traverse: 5000 mm/min Slide (Carriage) Feed rates: 1 – 1000 mm/min Rapid traverse: 5000 mm/min Spindle and Hydrostatic Quill Spindle speed: 40 – 2000 rpm (18 speeds) Automatic boring feeds: 0.04 – 0.35 mm/rev Tool taper: Morse 4 – SIP 4e Spindle motor power: 5.9 kW (8 HP) Hydrostatic quill diameter: 135 mm Functions: Automatic tool clamping Automatic depth stop Spindle rotation direction reversal Ppodpfxjyt Rrpe Acvjp Speed preselection Machining Assist Unit X and Y axis display: 0.001 mm Z axis display: 0.01 mm Memory capacity: 999 sequences Automatic movements: X and Y / Simultaneous XY Programmable increments: 0.002 / 0.009 / 0.1 / 1 mm Power Supply Electrical supply: 50 Hz – 380 V 60 Hz – 440 V Compressed air: 6 – 10 bar (11 l/min) Machine Dimensions Machine footprint: 2870 × 3480 mm Footprint with cabinet: 3870 × 4000 mm Total height: 3235 mm Weight Net machine weight: 10,000 kg Machine weight with cabinet and accessories: 11,000 kg

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display * Pedpov A S Efjfx Acvopp

Condition: used, Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Stroke: 60 mm Podpfx Acefc R D Isvepp -in: a wooden box -Dimensions: 390/340/H170 mm -Weight: 15.8 kg

Condition: used, Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel: Z 330 mm/Y 410 mm/X 630 mm -Quill stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm Pedpfed Tk Stjx Acvepp -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

Year of construction: 1987, condition: ready for operation (used), A complete Wagner WBX 1003 boring mill is available. Control: CNC Systems WB 1000, documentation is available. Ppodpfx Aottv Uaocvop

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Ppsdpex Rhlcofx Acvep Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, machine/vehicle number: 97-VP461, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 350 mm Spindle speed: 20,000 rpm Pjdpfx Acjyi U Iasvjpp Tool changer positions: 30 MACHINE DETAILS Control manufacturer: Fanuc EQUIPMENT BT 40 Big Plus tool holder 4th axis table Oil mist minimum quantity lubrication system

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) Pedpfx Ajd Amgkjcvepp DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes Ppjdpfx Acju U Hvwovjp - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, can be carried out by us on request. We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request.

Condition: excellent (used), Year of construction: 2018, Heidenhain iTNC 640 CNC control Table dimensions: 1800 x 2200 mm Max. workpiece weight: 25,000 kg X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,600 mm Spindle/cone diameter: 130 mm Speed range: 3,000 RPM Spindle power: 46 kW Max. torque at 100% duty cycle: 1,000 Nm Machine weight: 38,000 kg Power-on hours: 16,631 Spindle hours: 4,430 Accessories: – Controlled B-axis – 40-position tool changer / chain-type magazine Psdew Hbnvspfx Acvjpp – Belt filter system with high-pressure pump – Chip conveyor – Heidenhain TS 460 workpiece probe – Automatic milling head type HUI 50 – Movable operator cabin Yp = 1,600 mm, Zp = 600 mm – Centralized lubrication system – Pfannenberg oil cooler – Documentation

Year of construction: 2012, condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center machine in perfect condition incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Distance from the table surface to the spindle tip: 100 to 550 °. Rotary table diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm Ppjdpfxepqx H Ts Acvep C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Max. tool diameter Tool diameter: 100 mm Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 0103, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 635 mm, table length: 1,020 mm, table width: 860 mm, No reserve price – guaranteed sale to the highest bid! TECHNICAL DETAILS Worktable Table length: 1,020 mm Table width: 860 mm Max. workpiece weight: 800 kg Travel Longitudinal travel (X-axis): 900 mm Cross travel (Y-axis): 600 mm Vertical travel (Z-axis): 635 mm Ppodpfxowzxl Ue Acvep Spindle Spindle taper: ISO40 Quill feed (Z-axis): 200 mm Distance table to spindle: 15 – 850 mm Spindle speeds: 10 – 2,500 rpm Table feed rates: 5 – 5,000 mm/min Quill feed steps: 6 Quill feed per revolution: 0.03 mm/rev to 0.33 mm/rev Distance between columns: 950 mm Control: Heidenhain ITNC 320 MACHINE DETAILS Voltage: 50 Hz 3×380 V Connection: 50 Hz 3×380 V Spindle motor: 4.5 kW Power requirement: 10 kVA Dimensions & Weight Dimensions: 2,930×2,370×2,690 mm Weight: 6,500 kg

Year of construction: 1985, condition: used, spindle diameter 110 mm x-travel 900 mm y-travel 600 mm z-axis 200 mm table length 1020 mm table width 860 mm taper MK 40 Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Ppsdet Hwyxspfx Acvep Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load 15 kW - 380 V - 50 Hz Accessories / Special Features - BOSCH CNC Control, Model MICRO 8, in 3 axes, with monitor. Program input is either manual or via cassette, or via interface entry. - Digital display for Z Axis. - Separate switch cabinet. - Various tools. - Oil cooler for spindle lubrication.

Condition: used, Horizontal Boring Machine CORNAC C100 Travel X: 1000 mm Travel Y: 1000 mm Travel Z: 1260 mm Fixed table Cone: SA 50 Spindle: Ø 100 mm Spindle exit: 550 mm Rotation: from 10 to 1250 RPM Table size: 1550 x 980 mm Surfacing plate: Ø 520 mm Spindle motor: 9,5 kW Scale 3 axes HEIDENHAIN Automatic Feeds: X - Y - Z Supplied with a set of cones Voltage: 380 V Dimensions (L x W x H): 4500 x 2100 x 2450 mm Pedpfx Ajxu Ifhecvspp Weight: approx 8 T

Condition: used, Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Total height: 2600 mm Ppodpfxjxuf Uts Acvsp Weight: 4,5 T

Condition: used, Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Ppodpjxuf Uasfx Acvop Weight: 3 T