Used Torque Tester for sale (2,584)

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: TGL, pressure tester -Pressure range: 0 to 25 bar -Case dimensions: 330/200/H140 mm Nwjdpfx Ajycczusgwjd -Weight: 3.6 kg

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester -Pressure range: 2x 0 to 10 bar Nwjdeyccvfjpfx Agwed -Dimensions: 260/150/H205 mm -Weight: 3.2 kg

Condition: good (used), SIEMENS BCS Coagulation Analyser The fully automated Siemens BCS haemostasis system supports the user in performing efficient coagulation diagnostics. Due to the extensive parameter spectrum and the high throughput capacity, the system can be used in a wide range of applications. Thus, the BCS can be used as a high-throughput analyser as well as a special analyser. Item condition: used untested Nodoh Dpxpjpfx Agwowd Scope of delivery as shown Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Klingelnberg ZW 301 Gear Measuring Machine with Evaluation Computer Double-flank gear measuring machine with 4-position indexing table - Spur gear - Internal gear - Gear shaft - Computer (evaluation via industrial PC with fully automatic parameter calculation, quality determination, and classification) Workpiece data: Table load including fixture, max. 100 kg Load on support plate/vertical slide including fixture, max. 80 kg Workpiece knife with counterholder on measuring and feed slide, max. 300 mm Workpiece knife with counterholder on machine bed, max. 300 mm Device data: Heidenhain LIF 101 position measuring system Center distance min./max. 45/300 mm Table diameter 150 mm Table height above floor 950 mm Nodpfxsv Ic R Ae Agwewd Measuring pressure min./max. 5/30 daN Total connected load of the test device: 0.75 kVA Total space requirement: LxWxH 1900 x 1200 x 2200 mm Net weight: 750 kg PC, as well as some master wheels with common modules. Weight: 750 kg

Condition: used, Year of construction: 1996, diameter / mm workpiece length / mm length / mm MITUTOYO SURFTEST SV-500 Roughness tester with OLZE measuring plate Size: 600 x 600 x 80mm Target µm: 16 Actual µm: 10,00 Own weight: 85kg Nodpfx Astvm Smjgwjwd Information on the scope of delivery The package contains only the ordered product. Additional decorative items or other items shown in the product images are not included in the delivery.

Condition: used, Stationary hardness testing machine Hardness tester The hardness tester can be used manually with a template. The device is compatible with software, for data protection reasons the hard disk with software has been removed. Device is sold without software. Retrofit hardness tester Briviskop BL 3: HMEWin-Compact consisting of : 3.900,00 € -Pc with integrated touch screen -HMEWin-Touch Basis software - Hub with 12-pin connection for measuring system -Complete support system for the machine stand. Working time for retrofitting, commissioning, € 1,100.00 Calibration and instruction of employees approx. Nwedpfx Agjrfwynjwjd For more technical data, see type plate. You are welcome to come by for a viewing. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), Professional Mitutoyo surface roughness tester designed for precise measurements in quality control, measurement laboratories, and in manufacturing environments. This is an industrial metrology-grade device, widely used in the automotive sector, CNC machining, toolrooms, and metalworking facilities. The 178-562-11D model enables fast and repeatable measurement of roughness parameters in compliance with current standards. Robust construction, intuitive operation, and high measurement accuracy are features for which the Mitutoyo brand is known. Technical condition: used, fully functional Visual condition: very good (as shown in the photos) Nedpjyc Rwdsfx Agwjwd Power supply: rechargeable battery Manufacturer: Mitutoyo (Japan) Included: • Mitutoyo 178-562-11D surface roughness tester • Transport case • Full set exactly as shown in the pictures

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information Nwsdpfx Agoyc H I Sewed • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, This listing is for a Sartorius Sartocheck 3 Plus Filter Integrity Tester. The unit is in full working condition and is ready for immediate release. The Sartorius Sartocheck 3 Plus Filter Integrity Tester is an advanced instrument designed for the precise testing of membrane filter systems, making it essential for biochemistry and pharmaceutical applications. Here’s a detailed breakdown of its features and specifications: Key Features: Microprocessor Control: Offers programmable protocols for testing filter systems, allowing users to store up to 60 programs directly and expand to 240 with a memory card. Integrity Testing: Designed to ensure the integrity of membrane filters, minimizing the risk of using defective cartridges. Comprehensive Testing Protocols: Includes a variety of tests such as: - Diffusion Test - Bubble Point Test - Combined Diffusion and Bubble Point Test - Water Intrusion Test - Water Flow Test - Pressure Drop Test - Multipoint Diffusion Test - Data Reporting: Generates complete paper reports to meet cGMP requirements, detailing: - Test parameters (pressure, time) - Results (net volume, pressure drop, evaluations) - Filter cartridges used and products tested - User-Friendly Cleaning Protocol: Provides on-screen instructions for cleaning, compatible with any cleaning reagent due to its stainless steel construction. Manufacturer Specifications: Power Requirements:Operating Voltage: 100-240 V ±10% Phases: 1 Ph/N Grounding Conductor: Separate SL (yellow-green) Frequency: 47-63 Hz Protection Rating: IP 44, indicating resistance to dust and splashing water. Pressure Specifications: Maximum Operating Pressure: 10 bar g Operating Pressure: Minimum 4 bar g Internal Limit Pressure: 10 bar g Maximum Power Input: 74 Watts Installation: Must adhere to VDE regulations. Nedpfx Agoxxyarjwjwd

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) Njdpfju N Avxex Agwjwd *

Condition: new, Year of construction: 2024, functionality: fully functional, PTR1600L Carmec Pressure tester for cylinder head and block - new machine Hydraulic tray lifting, motorized tray rotation. Max. cylinder head dimensions: 1350 mm x 300 mm × 395 mm Max. cylinder head weight: 300 kg Adjustable pressure air test: 0 bar -10 bar Adjustable working temperature: 0 - 90°C Stainless steel tank capacity: 540 Liter Heating power: 2× 4,0 kW Nsdpfx Aeu S Eqnsgwswd Hydraulic unit power: 0,75 kW Rotation motor power: 0,18 kW Maximum vertical travel distance: 600 mm Up and down travel time: 10s Rotation speed: 4 RPM Supply voltage: 220-440V 3Ph+E ( +/- 10% ) Frequency: 50-60 Hz Operating voltage: 24 V AC Empty tank: 440 kg Machine dimensions: 2050 mm × 1120 mm × 1650 (max. H) mm If you are interested, please contact me! More machines for sale: Berco, Comec, A-M, Carmec, Kwik-Way, Serdi, PEG Connecting rod boring, cylinder boring, honing machines, valve seat milling, parts washer, valve grinder, line boring, valve guide press machine, pressure test bench, resurfacer, vacuum tester, valve spring compressor, crankshaft polisher machines

Condition: used, Measurement data acquisition device, test device, telemetry system -Axon: J1-CS10 Torque Telemeter -Dimensions: 205/60/H110 mm -Weight: 0.8 kg Nodpfx Aofg E Haogwswd

Condition: used, -type: HF 727091 -Shaft: Ø 25 mm, height of shaft axis 80 mm Nwsdpeuz Ia Hsfx Agwjd -Base plate: hole spacing 180/180 mm / M20 -Quantity: 1x bearing block available -Dimensions: 250/230/H115 mm -Weight: 8.8 kg

Condition: used, Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 80-400 Nm .: 4440-01 Nwjdpfx Agjqw D D Towjd -Torque: 80 - 400 Nm / 60 - 300 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 755/70/H65 mm -Weight: 2.1 kg

Condition: good (used), Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm Nedpfx Agjwbd Twjwswd -Weight: 7.9 kg

Condition: used, Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench -Torque module: for mounting water meters or other screw connections -Frequency converter: from Yaskawa type VARISPEED 616G5 -Mounting device: for water clocks Nwedpfxecm I T Tj Agwod -Speed and torque: adjustable -various Recordings: for water clocks -Dimensions: 1500/650/H2060 mm -Weight: 314 kg -The two geared motors each have a power: of 1.5 kW and a speed of 38 rpm -Dimensions: 880/600/H920 mm -Weight: 132 kg

Condition: used, Plummer Block Housings, Plummer Block Housings -Hole center height: 70/Ø 16 mm Nwodpod I Tm Rofx Agwsd -Base plate: 235 x 147 mm -Dimensions: 235/147/H approx. 100 mm -Weight: 4.3 kg

Condition: used, -type: 081869 3 R -Shaft: Ø 25 mm, height of shaft axis 70 mm Nwjdpfxsuz Ia Te Agwed -Hole spacing: 170 x 17 mm -Quantity: 1x bearing block available -Dimensions: 205/55/H110 mm -Weight: 3.2 kg

Condition: used, Contour measuring device, contour measuring device, contourograph, contourograph, roughness measuring device, roughness measurement, roundness measurement, roughness probe Nodpfsk H R Hujx Agwowd -Manufacturer: Hommel, probe holder for roughness measuring device -Type: KVA type P2/115 -Tactile path: s= 12 mm -Dimensions box: 345/130/H85 mm -Weight: 1.7 kg

Condition: good (used), Device tester, power supply -For: 15V devices -Measuring range -Measuring current: max. 300 mV -Dimensions: 250/260/H120 mm -Weight: 1.9 kg Nsdpfx Agocdlt Sewswd

Condition: used, Alignment tester, shaft aligner, laser shaft aligner -Manufacturer: db Prüftechnik, alignment tester Optalign 1.5 -Accessories: see photos Nwjdoiwuzajpfx Agwod -Dimensions transport box: 420/290/H555 mm -Weight: 20 kg

Year of construction: 2006, condition: used, Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg Nwjdpfefw Rwmjx Agwod

Condition: used, -type: HF 727075 -Shaft: Ø 16 mm, height of shaft axis 70 mm -Base plate: hole spacing 165/150 mm / M16 -Number: 8x bearing block available -Price: per piece -Dimensions: 210/200/H100 mm Nsdpfeuz Iayex Agwewd -Weight: 5.2 kg/piece

Condition: used, Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 40-200 Nm .: 4420-01 Nwsdpoq Davfsfx Agwjd -Torque: 40 - 200 Nm / 30 - 150 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 560/60/H60 mm -Weight: 1.3 kg

Condition: good (used), Legionella Water Tester -With documents in English -Dimensions: 480/380/H180 mm -Weight: 3.2 kg Nedpfx Ajb A Sh Tsgwowd