Used Nitrogen for sale (350)

Condition: excellent (used), Gas Cylinder Dryer / Infrared Heating Unit for Gas Bottles (Nitrogen, CO2 etc.) For sale is a professional gas cylinder drying unit with infrared heating, e.g. for nitrogen or other industrial gas cylinders. The system consists of a large insulated stainless‑steel drying cabinet with infrared heaters, a separate control cabinet and a loading ramp. Features / Equipment: Nodpfxjy Nkqxj Acmelc Drying system for several gas cylinders at the same time (industrial design) Infrared heating with OSRAM THERATHERM 250 W emitters Insulated stainless‑steel housing with reflective inner lining Solid base frame with transport frame / rollers Separate electrical control cabinet including: Temperature controller Ammeters for heating circuits Hour counters (heating rods / lamps) Drying phase counter Push buttons incl.: bottle drying ON/OFF, Start/Stop, heating phase ON, vacuum/underpressure, valves, emptying, reset Main switch Upper pipe manifold with several gas / vacuum connections and valves Aluminium loading ramp for moving cylinders into the unit The unit was used in an industrial environment. If you are interested or need more details, please send me a message.

Condition: excellent (used), SLM Solutions SLM 500 HL Professional system for the additive manufacturing of metal components using selective laser melting. Suitable for industrial applications, prototype construction, toolmaking, aerospace, medical technology, and series production. Technical data Manufacturer: SLM Solutions Type: SLM 500 HL Year of manufacture: 2015 Build volume: 500 x 280 x 365 mm Laser configuration: Quad-fiber laser 4 x 400 W Max. build rate: up to 105 cm³/h Layer thickness: 20 µm to 75 µm Min. feature size: 150 µm Beam focus diameter: 80 - 115 µm Max. scanning speed: 10 m/s Supply voltage: 400 V / 50 Hz, 3/N/PE Control voltage: 24 V DC Rated current: 36 A Heating power: 2.4 kW Protection class: IP50 Compressed air requirement: 50 l/min at 6 bar Special features Patented multi-beam technology Automatic powder management PSX sieving station PRS unpacking station Laser class 1 CE marking available Service / Operating history The system was used exclusively for processing aluminum from the beginning and operated under a nitrogen atmosphere. It operated reliably until decommissioning. During the last maintenance, the oxygen sensors, including the evaluation unit, were updated to the latest version. The system was then professionally decommissioned. Cooling unit Manufacturer: Riedel Type: WKS 101.2M5LE.I Year of manufacture: 2016 Refrigerant: R134a Filling quantity: 3.0 kg Operating pressure HD: 18.7 bar Protection class: IP54 Scope of delivery according to delivery note SLM 500 HL laser melting system, approx. 2680 kg Riedel cooling unit WKS101.2M5LE.I, approx. 200 kg SLM filter system, approx. 150 kg SLM unpacking station PRS 500, approx. 855 kg SLM sieving system PSX 500, approx. 690 kg Logitrans lifter LFSM 1002/1620, year of manufacture 2015, approx. 550 kg 2 x SLM build cylinders, each approx. 205 kg Nljdpfsza Ethsx Acmsc SLM spare parts / piping Dimensions / Weight Complete system according to manufacturer's specifications: approx. 5200 x 2800 x 2700 mm Weight according to manufacturer's specifications: approx. 3100 kg in operating condition approx. 2400 kg without powder Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Inspection and testing on-site are possible by arrangement and are highly recommended. Important note: All information is provided to the best of our knowledge based on available documents, software displays, manufacturer data, delivery note and nameplates. Deviations in technical data are possible. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), EOS P 396 Laser Sintering System Manufacturer: EOS GmbH Type: P 396 Machine Type: Industrial SLS laser sintering system for plastic components Process: Selective Laser Sintering (SLS) For sale is a professional, industrial laser sintering system from EOS GmbH. The system was developed for the additive manufacturing of plastic components using the Selective Laser Sintering process and is suitable for prototyping, small-series production, research and development, as well as industrial production applications. Technical Data Technology: Selective Laser Sintering (SLS) Usable build volume: 340 x 340 x 600 mm Build rate: up to 48 mm/h (material-dependent) Layer thicknesses: 0.06 mm 0.10 mm 0.12 mm 0.15 mm 0.18 mm Laser system: CO₂ laser Laser power: 70 W F-Theta precision optics Scanning speed up to 6 m/s Laser class 1 Voltage: 400 V 3~ / N / PE Frequency: 50 / 60 Hz Rated power: 10 kW Current draw: 16 A Fuse rating: 32 A Supply: Integrated nitrogen generator External nitrogen connection available Compressed air supply required: at least 10 m³/h at 5,000 hPa Software EOS PSW EOS RP Tools EOSTATE Interfaces STL Ethernet Certifications CE NFPA EN 60825-1:2007 Maintenance Condition Current service and maintenance records are available. According to the available service reports, the following work has been carried out, among others: Heating elements replaced Nodpfx Acozarg Ujmolc Roller belt replaced X-axis and carriage cleaned Laser window and mirrors cleaned Seals replaced Safety circuits checked Docking Station / Powder Supply Docking station with pneumatic conveying system for automated powder supply to the laser sintering system. Manufacturer: HYDAC Cooling GmbH Type: FWKS-G2-001500-W-W-R25-2-IW-UL Electrical data: 230 V ±10 % 1 PH / 50-60 Hz Max. current draw: 8.0 A ICC / SCCR: 10 kA CE / RoHS Additional Equipment Control panel Docking station Pneumatic conveying system 2 x EOS Multibox Capacity per Multibox: approx. 230 liters For storing, collecting, and transporting fresh and used powder. Dimensions and Weight System including control cabinet: approx. 1,840 x 1,175 x 2,100 mm Control panel: approx. 950 x 700 x 1,550 mm Total weight of laser sintering system: approx. 1,400 kg Recommended installation space: at least 4.3 x 3.9 x 3.0 m Areas of Application Additive Manufacturing Rapid Prototyping Small-Series Production Automotive Industry Mechanical Engineering Aerospace Medical Technology Research and Development Scope of Delivery EOS P 396 Laser Sintering System Control panel Docking station 2 x EOS Multibox Available documentation Service reports Accessories and components as shown in the pictures Condition Used Machine from industrial use Optical condition as shown in the pictures Scope of delivery as shown Inspection and testing on site possible and expressly desired after prior appointment. Shipping or freight forwarding possible. Availability: upon agreement. Scope of delivery as shown. Changes and errors in the technical data as well as prior sale are reserved.

Condition: excellent (used), functionality: fully functional, power: 40 kW (54.38 HP), input current: 56 A, temperature: 450 °C, inner dimension length: 1,000 mm, inner dimension width: 1,500 mm, inner dimension height: 1,000 mm, total length: 1,900 mm, total width: 2,500 mm, total height: 1,600 mm, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, Chamber oven, make: Nabertherm type: N 1500/45 HA electrical heated max. temperature: 450°C internal dimensions (w x d x h): 500 x 1000 x 1000 mm external dimensions (w x d x h): 2500 x 1900 x 1600 mm Njdpfx Aszd Sd Tecmelc circulation rate: 3600 m3/h gas inlet pressure: max. 25 bar gas outlet pressure: 0,2 / 2 bar nitrogen: 0,3 / 12 m3/h input frequency: 50 Hz input current: 56,3 A power: 39,9 kW

Condition: excellent (used), Year of construction: 2013, MAN gas tank ADR truck used for carbon dioxide CO2 Truck BDF/ADR Nlsdjyanhzjpfx Acmjc MAN year 2013 606.000 km Tara 8705 kg Tank for CO2 Pump Flow-meter Only for export from EU We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail.

Condition: used, Year of construction: 2008, operating hours: 13,000 h, functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular pump with electronic drive unit, ProfibusDP gateway and accessories, PM P03 020 GA, TPH 2101 P + TIC 250 Model Turbomolecular Pump: PMP03020G, TPH2101P Model Gateway: TIC250 Nledpfx Ajncd S Uecmoc Turbo molecular pump: Serial number: 14219214 YoM: 2008 Nominal connection size inlet: DN 250 ISO-K Nominal connection size outlet: DN 40 ISO-KF Flood connection: G1/8" Rated speed: 31.500/min (525Hz) Pumping speed N2: 1.900l/s Max. Prevacuum pressure N2: 1,5mbar Max. Prevacuum pressure He: 1,0mbar Max. Prevacuum pressure H2: 0,5mbar Oil: PM 016 144-T Note on condition: 1. statements on the operation hour time is about 13,000h with about 1,600 start-up and shut-down. 2. process gases: nitrogen and argon 3. process dusts: chromium nitrite and steel 100Cr6 4. the pump was stored fully functional in 2018 and externally cleaned.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,010 mm, working width: 1,510 mm, working height: 100 mm, travel distance X-axis: 3,010 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 100 mm, cutting speed: 100 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,100 kg, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 5,230 kg, total length: 4,921 mm, total width: 2,225 mm, total height: 2,317 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1530NP 6kW fully enclosed compact fiber laser cutting machine The SENFENG SF1530NP 6kW is a fully enclosed, compact fiber laser cutting machine designed for efficient and precise sheet metal processing. With a working area of 1500 × 3000 mm, it is ideal for workshops, job shops, and manufacturing companies looking for a space-saving, safe, and reliable laser cutting solution. The machine is equipped with a 6kW MAX fiber laser source, a RayTools laser cutting head, and a BOCHU CNC laser cutting system. It is suitable for cutting stainless steel, carbon steel, aluminum, brass, and other metal sheets. The compact design, along with the integrated laser source and integrated control cabinet, reduces the required floor space without compromising stable cutting performance. Technical highlights: • Working area: 1500 × 3000 mm • Laser power: 6kW • MAX fiber laser source • RayTools or Precetic laser cutting head • BOCHU CNC laser cutting system • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability accuracy: ±0.02 mm • Maximum speed: up to 100 m/min • Maximum acceleration: 0.8G • Maximum table load: 1100 kg • Machine dimensions: approx. 4921 × 2225 × 2317 mm • Machine weight: approx. 5230 kg • Power supply: 3-phase, 380V / 50Hz • Protection class of power supply: IP54 The fully enclosed design increases operational safety and supports better smoke and dust control. The pull-out work table facilitates loading and unloading as well as the removal of residual material. The automatic gas distribution system enables precise control of nitrogen, oxygen, and compressed air, reducing manual adjustments. Typical applications include sheet metal processing, mechanical engineering, signage, kitchen and stainless steel fabrication, lighting manufacturing, control cabinet construction, automotive parts, and general metal processing. SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and technical service. In addition, a local spare parts warehouse is available in Germany to enable rapid service support and reduce potential downtime. The SF1530NP 6kW is a practical solution for customers looking for a compact design, safe operation, reliable cutting quality, and professional local service. Nedpfx Aezd Dz Recmelc

Condition: used, TECHNICAL DETAILS - Belt width : 80 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] Njdpfxow H Dvpj Acmslc - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: used, TECHNICAL DETAILS - Belt width : 100 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote Nlodpfx Acsu E U Tbjmsc - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,541 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 3030 L20 was manufactured in 2015. It features a powerful TruFlow 3200 CO2 laser with a laser power of 3200 W, making it suitable for various cutting applications. The machine has been utilized for 82,247 working hours, ensuring reliability and performance. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 L20 machine we have for sale. Contact us for further details. - Laser Type: TruFlow 3200 (CO2)- Laser Power: 3200 W- Working Hours (NC): 82,247 h (as of 04.05.2026)- Working Hours (Laser On): 80,633 h (as of 04.05.2026)- Working Hours (Beam On): 45,541 h (as of 04.05.2026)- Nominal Voltage: 400 V- Phase Configuration: 3~- Frequency: 50 Hz- Connected Load: 73 kVA- Control Voltage: 24 V- Main Fuse Protection: 125 A- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 20 bar- Compressed Air Connection: 7-10 bar- Documented Maintenance Issues (07.05.2026): White connectors degrading due to plasticizer loss; Laser power not reaching set value; Oil spray unit non-functional (not utilized); Cooling fan runtime limit reached (+500h extended); Filter mats worn out/need replacement.- Control System (Software Version): SINUMERIK 840D SL- Configuration: Standard configuration- CoolLine (Option): Not included- Cross Conveyor (Option): Not included- Fire Extinguishing System (Option): Not included- Integrated Leak Test (Option): Not included Nedpfx Aeza Uuhocmelc

Condition: good (used), ZwickRoell Temperature Chamber for AllroundLine Model: TEE160/LN2 40S The TEE160/LN2 40S is a specialized temperature chamber designed primarily for material testing in combination with ZwickRoell testing machines (specifically the AllroundLine). Flexible Application ZwickRoell’s innovative temperature chamber ensures a flexible testing system tailored to customer needs—without compromise. This guarantees reliable test results well into the future. The safety door function ensures operator protection in compliance with European safety regulations. The chamber door serves as a safety door with an interlocking mechanism. Precise Temperature Control The temperature chamber creates extremely uniform and precise conditions for specimens throughout the entire chamber volume. This ensures accurate and repeatable test results. Key Specifications Temperature range: -40°C to +160°C. Cooling system: Liquid nitrogen (LN2) for rapid cooling rates. Nlsdpozcpwpsfx Acmjc Temperature Chamber for AllroundLine Application: Specifically designed for integration into materials testing machines to perform mechanical tests (e.g., tensile or compression tests) under controlled environmental conditions. All panels in the door area (interior and exterior) are made of stainless steel. Dismountable heavy-duty base frame Dimensions: W x D x H = 1400 x 600 x 800 mm Chamber: W x D x H = 440 x 530 x 650 mm Test opening: 110 mm Power supply: 400/230 V, 16 A, 3N~, 50/60 Hz Cooling via LN2 (liquid nitrogen) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 2008, Manufacturer: Haarslev Model: HFMI2000 / HF300GH Year: 2008 Condition: Used Serial number: 305649 Stock number: 3366 Mixer: double paddle mixer Capacity: 2000 liters Plate diameter: 300 mm Infeed height: 2850 mm Discharge height: 950 mm Compressed air: 6 - 8 Bar Nodpfxjy S Rrhj Acmelc Power: 3 x 400V, 50Hz, 88kW Dimensions: 4950 x 3550 x 3550 mm Mixer cooled with nitrogen injection. Haarslev HF10 product hopper of 2000 liters with ribbon mixer and 11kW pump. Haarslev HF300GH 300mm mincer head of 55kW. Includes two accessory carts.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h Nlodjzarc Aopfx Acmoc • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: • 1x build cylinder • 2x powder supply cylinders • Cooler • Pallet truck • Unpacking station • 2x new filters • 11x aluminum build platforms • Vacuum conveyor system • Sieving machine with control unit • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Nedex R D Efjpfx Acmjlc Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING Nsdpshwhf Rofx Acmjlc

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: MAX 6kW mit CE, laser power: 12,000 W, sheet thickness (max.): 80 mm, sheet thickness steel (max.): 80 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, table length: 6,000 mm, table width: 2,500 mm, working length: 6,000 mm, working width: 2,500 mm, positioning accuracy: 0.3 mm, repeat accuracy: 0.3 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 13,500 kg, total length: 14,500 mm, total width: 4,500 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber laser cutting machine 6025, 30 kW – Overview Safety & Protection Fully enclosed metal enclosure with radiation-shielding doors and windows. Environmentally friendly and safe for operators. Work platform High and low, parallel platform: Front end: Laser cutting. Rear end: Loading and unloading. No mutual interference → increased work efficiency. Machine structure 30 kW bed structure: Time-shared, segmented dust extraction. Excellent heat dissipation, resistant to thermal influences. Industrial accessories: Air conditioning, special cooling system, constant temperature & humidity → stable performance & longer service life. Precision guarantee: Bed processed by a large gantry milling machine. Industrial guide rails, gears, screw supports. Complete servo control, double-sided dual drive. High industrial quality and precision. German assembly technology: Precision calibration with laser interferometers Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software package: Nlodpfszb Uinox Acmec Market-standard, safe, and user-friendly software. Supports intelligent networking. Professional nesting software: CypNest (included). Core components Laser cutting head BOCI BLT442 Laser source MAX 30 kW, CE Water cooler HANLI 20 kW Guide rail TAIWAN DTX 30+20+20 Frame TAIWAN JT Reducer Germany Techmach Camera 3 pieces Servo motor BOCHU Proportional valve Felton Electronic components SCHNEIDER Triple air inlet Nitrogen, oxygen, air Lubrication system Automatic oil supply system Accessories 30 protective lenses, 30 nozzles, tool kit. Optional: Air compressor ARS-30HP-XF-1.6 MPa, dust collector 11.5 kW.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 6,000 W, sheet thickness (max.): 15 mm, pipe diameter (max.): 240 mm, pipe length (max.): 6,050 mm, working length: 6,050 mm, working width: 240 mm, working height: 240 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 6,800 mm, travel distance Z-axis: 250 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 60 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 300 kg, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, total length: 16,000 mm, total width: 4,470 mm, total height: 2,450 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, # Tube Laser LT6025G – High-Performance Tube Laser Cutting System with 3-Chuck Technology and Zero-Tailing System ## Precise Tube and Profile Processing at the Highest Level The LT6025G tube laser cutting system was developed for economical and highly precise processing of tubes and profiles. Thanks to state-of-the-art 3-chuck technology, powerful servo drives and an intelligent zero-tailing function, the system enables maximum material utilization while simultaneously ensuring the highest cutting quality. The machine is ideally suited for steel construction, metal construction, mechanical engineering, plant engineering, as well as for job shops and series manufacturers with the highest requirements for productivity and precision. --- ## Technical Data * Model: LT6025G * Tube Length: up to 6,000 mm * Tube Diameter: approx. Ø 10 – 250 mm * Clamping System: 3 fully automatic pneumatic chucks * Acceleration: up to 1.2 G * Positioning Accuracy: ± 0.05 mm / 1,000 mm * Repeatability: ± 0.03 mm / 1,000 mm * Cutting Gases: Oxygen, Nitrogen, Compressed Air * Drive System: High-dynamic Servo Drive Technology * Automatic Central Lubrication * Professional Tube Nesting Software * Robust Machine Construction for Continuous Industrial Use --- ## Processable Materials and Profiles The LT6025G processes a wide variety of tube and profile shapes: * Round Tubes * Square Tubes * Rectangular Tubes * Oval Tubes * Angle Steel * U-Profiles * Channel Profiles * Open Profiles * Special Profiles --- ## Zero-Tailing Technology The innovative zero-tailing system reduces the unavoidable scrap section to a minimum, thereby significantly increasing material utilization. This is particularly advantageous with high-priced materials, resulting in a noticeable reduction in production costs and sustainably improving profitability. --- Nodpfxozb Irvo Acmelc ## Your Advantages at a Glance ✔ Modern 3-chuck clamping system for maximum precision ✔ Minimized material waste thanks to zero-tailing technology ✔ High dynamics and productivity through 1.2 G acceleration ✔ Excellent cutting quality and clean cut edges ✔ Precise drilling, contours and cutouts in a single operation ✔ Fast changeover for different profile shapes ✔ Reduction of rework and grinding effort ✔ High process reliability in series production ✔ Suitable for single-part, small-batch and large-batch production ✔ Economical production with high flexibility --- ## Typical Applications * Steel Construction * Metal Construction * Mechanical Engineering * Plant Engineering * Vehicle Construction * Commercial Vehicle Construction * Furniture and Profile Manufacturing * Job Shop Manufacturing * Tube Processing --- ## Inspection and Demonstration An inspection of the system and a test run with your components are possible at any time by prior appointment. We will gladly provide you with further technical documentation, videos, sample parts or an individual offer.

Condition: used, operating hours: 7,529 h, mileage: 49,881 km, power: 55 kW (74.78 HP), first registration: 11/2015, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 650 kg, empty load weight: 2,850 kg, next inspection (TÜV): 04/2026, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: air conditioning, cabin, immobilizer system, parking sensors, power assisted steering, * German vehicle * Original 49,881 km * 7,529 operating hours * Documentation available * Schmidt Swingo, multiple units available * Condition as shown in photos * All-wheel steering * High-pressure cleaner with high-pressure lance for pre-cleaning and removal of stubborn dirt * 2 front disc brushes * 800 mm diameter * Sweeping width: 2,800 mm * Ideal for footpaths, bicycle paths, and narrow alleys * Air conditioning * Pre-spraying system * Debris hopper 1.8 m3 * Fresh water tank 190 litres * Total capacity 380 litres * EasyDrive (hydrostatic drive system) (SN) * Hydropneumatic suspension with 4 nitrogen spheres * Remote-controlled container lid opening and tilting * Diesel engine VM39D/2 * 55 kW * 50 km/h type approval * Driver's cab with air-suspended comfort seat * Camera for suction nozzle monitoring * Reversing camera * 2-seater * Rotating beacon(s) * Wheelbase 1,800 mm * GVW 3,500 kg * Payload 650 kg * Self-propelled working machine * For sales to businesses and for export (non-EU and within EU), German commercial law applies. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer generally does NOT include new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our website at Nlsdpfxex Uy Abs Acmsc We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the opportunity to inspect and check the goods to avoid any misunderstandings regarding their condition and suitability. Inspections and checks are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect details in the offer. The buyer is obliged to independently verify the condition and specifications of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: excellent (used), Year of construction: 1993, Gas tank used for CO₂ (carbon dioxide). Working pressure: 20 bar. Nedjy R Uq Sepfx Acmslc Year of manufacture: 1993. We also have in stock other tanks and trailers for different gases: oxygen, nitrogen, argon, hydrogen, helium, methane, ethylene, N2O, LNG, CNG

Condition: excellent (used), Year of construction: 1991, We can offer you CO2 carbon dioxide gas used storage tank vessel Nodok Eac Djpfx Acmolc Volume 21050L; Working pressure 22 bar; Export from EU We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 15040169 + 0805014349, Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750 Turbo pump model: PMP03020GA, TPH2101P Drive electronics model: PMC01713, TC750 Turbomolecular pump: Serial number: 15040169 Inlet connection nominal diameter: DN 250 ISO-K Outlet connection nominal diameter: DN 40 ISO-KF Nlsdpfjvrzakox Acmsc Flood connection: G1/8" Nominal speed: 31,500/min (525Hz) Suction speed N2: 1,900l/s Max. backing pressure N2: 1.5mbar Max. backing pressure He: 1.0mbar Max. backing pressure H2: 0.5mbar Oil: PM 016 144-T Drive electronics: Serial number: 0805014349 Input: 24/48/72/140V DC +/-5%, 5.4A Output: 0-140V AC, 0-1600Hz, 6.5A Note on condition: 1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and stops. 2. Process gases: nitrogen and argon 3. Process dusts: chromium nitride and steel 100Cr6 4. The pump was stored in full working order in 2018 and cleaned externally.

Condition: excellent (used), Year of construction: 1991, Gas tank semi-trailer used for CO2 Carbon dioxide Manufacturer: SATRI Year: 1991 Nlsdpfeykpfpsx Acmoc Tare weight: 10300 kg Volume: 24 m³ We also offer other tankers, tanks, and vessels for LIN, LOX, LAR, LNG, CO2, Argon, Oxygen, Nitrogen, Carbon Dioxide, LNG, Hydrogen, and Methane. We will be glad to answer your questions via Phone and E-mail

Condition: ready for operation (used), Year of construction: 2006, operating hours: 37,364 h, laser power: 1,500 W, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 6,000 W CO₂ laser and a generous working area of 3,000 × 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO₂ laser cutting machine we have for sale. Contact us for further details. Nedpfxoynlhne Acmjlc • Laser Power: 6000 W • Laser Type: CO₂ • Supply Voltage: 400 V / 50 Hz • Connected Load: 109 kVA • Control Voltage: 24 V • Required Fuse Protection: 3 × 160 A • Compressed Air Connection: 7–10 bar • Nitrogen Connection (N₂): 30 bar • Oxygen Connection (O₂): 20 bar • Working Area (Sheet Format): 3000 × 1500 mm

Condition: defective spare-parts repository (used), functionality: not functional, Year of construction: 2010, laser power: 2,000 W, power: 65 kW (88.38 HP), input voltage: 400 V, input current: 100 A, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 7 bar, overall weight: 8,900 kg, Equipment: CE marking, documentation/manual, We are offering this defective TRUMPF TruLaser 1030 laser cutting machine, manufactured in 2010. The resonator of the machine is defective. The machine is being sold as a source of spare parts. Laser power: 2000 W Nlodpfxjzdz Nrj Acmjc Year of manufacture: 2010 Mains voltage: 400 V Frequency: 50 Hz Connected power: 65 kVA Control voltage: 24 V Connected current: 3 × 100 A Compressed air connection (N₂): 7–14 bar Nitrogen connection (O₂): 29 bar Oxygen connection: 14 bar Machine weight: 8900 kg If you have any questions or need more information, please send us a message or call us.

Condition: used, machine/vehicle number: M338, Used Crown Bevcorp 40 valve filling monoblockTechnical Specifications & Performance DataThis used can filling monoblock combines a Bevcorp UB40 rotary can filler with an Angelus 61H seamer, delivering dependable performance for industrial packaging and beverage production. The system is configured for aluminum cans and is supplied with tooling for multiple can body styles. It is an excellent option for a second hand solution within a used bottling line where reliability and ease of integration are essential.Filler model: UB40 rotary can fillerFiller valves: 40Seamer model: 61HOverhauled in 2019Containers: Aluminum cans (standard and sleek)Ends: 202 can endsSpeed: 20.000 BPHConfigured can sizes: 12 oz (approx. 0.355L) and 16 oz (approx. 0.473L)Included components: Can transfer conveyor, electrical panel, lubrication panel system, stainless steel mechanical safety guarding, handling parts, operator manualElectrical: 480 V, 3 Ph, 60 HzNitrogen dosing: Vacuum barrier nitrogen dosing systemCondition: Used – good; regularly maintainedAdvanced Automation & Control SystemsThe monoblock includes an integrated electrical panel to manage coordinated operation of the filler and seamer. Safety interlocks and stainless steel safety guarding support operator protection during beverage production. Variable speed drive elements are supported by a dedicated lubrication approach for reliable operation under continuous duty. Quick access to guarding and panels facilitates routine adjustments and preventive maintenance in industrial packaging environments.Production Line Integration CapabilitiesDesigned to operate inline with upstream and downstream equipment, this filler–seamer block integrates smoothly into a used bottling line or a new beverage production layout. The included can transfer conveyor simplifies synchronization between the 40-valve filler and the 61H seamer. Existing handling parts and tooling accommodate both standard and sleek aluminum cans with 202 ends, supporting efficient format changes between 12 oz and 16 oz. The monoblock can operate as part of a complete packaging machinery setup alongside depalletizing, rinsing, coding, and case packing systems.Machine Condition & Maintenance HistoryThe equipment is described as used – good and has been regularly maintained. Mechanical safety guarding, lubrication panel, and operator manual are included, indicating a machine that has been cared for and kept in service-ready condition. This makes it a strong second hand choice for plants seeking to expand or refresh beverage production capacity with minimal downtime.Operational Performance & VersatilityEngineered for flexibility, the monoblock is capable of running carbonated and non-carbonated beverages. The 40-valve filler supports steady throughput and consistent fill accuracy, while the Angelus 61H seamer is recognized for robust end application and seam integrity. The vacuum barrier nitrogen dosing system enhances product quali... Nlodpfjzcf Idox Acmsc