Used Hollow Blocks for sale (3,539)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 1032, FBH 1200 Machine Track gauge 1710 mm, equipped with rubber wheels FBH 1200 mobile, fully automatic vibropress for the production of hollow blocks, bricks, as well as blocks. *Output / 8 hours / 100%: 12,000 pcs hollow blocks. The step-by-step production line for small-size precast elements manufactures various concrete components on a smooth concrete surface, typically outdoors. The machine moves automatically during production. Above the production area, a power supply system is installed to provide power to various devices. The step-by-step FBH 1200 vibropress is supplied with concrete via a feed hopper designed for use with a forklift truck. The manufactured components remain at the production site until dry. Ndjdpfeyf Uazjx Abyoc Production area: 1100 x 1050 mm Height of produced elements: up to 380 mm A palletizer can be purchased for an additional fee—see last two photos.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, fuel: liquefied natural gas (LNG), - 1x CHP unit - As new - Control cabinet still in original packaging - Located in Genthin We are selling a CHP unit in as-new condition. It has never been used, and the control cabinet is still in its original packaging. Njdpfx Abozazraeysdc It has never been used but has been regularly maintained and is fully functional. The CHP unit is located in Genthin and can be inspected at any time.

Condition: excellent (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, feed length X-axis: 535 mm, feed rate Z-axis: 3,845 m/min, turning diameter over cross slide: 630 mm, turning diameter: 950 mm, turning diameter over top slide: 630 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, total height: 1,850 mm, total width: 2,105 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret Nodez S Nc Uopfx Abyodc 2 x Fixed Steadies

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-25 concrete block making machine is an excellent solution for plants producing concrete blocks, bricks, paving stones, and bims, offering high efficiency and flexible production capabilities. Developed in line with modern production concepts, this machine can easily produce various products such as paving stones, curb stones, and hollow blocks using different molds thanks to its single-layer structure. Thanks to its scalable facility structure, investors can quickly and economically increase their production capacity according to their needs. The BS-25's fully automatic PLC control system allows a single operator to manage the entire production process. The touchscreen LCD control panel offers the ability to monitor and print production data in real time with its user-friendly interface and advanced reporting system. With its remote access feature, the system can be controlled via LAN or internet connection, allowing for easy detection of potential malfunctions and remote software updates. This smart automation technology ensures consistent quality and maximum production in every shift. BS-25 - Concrete Block Machine Technical Specifications Ndjdjxp Uurspfx Abyjc Production Capacity: 110–120 pallets/hour Pallet Size: 1,200 x 980 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.5 m³ Hydraulic Oil Capacity: 500 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Production Capacity in 8 Hours: 10,000 concrete blocks / 25,000 interlock blocks Why Should You Choose the BS-25 Concrete Block Machine? CONSTMACH stands out in the production of concrete block, brick, and paving stone making machines with its reliability, engineering quality, and after-sales support. The BS-25 model reduces your production costs while increasing your capacity with its energy-efficient design, long-lasting components, and smart control system. Each machine is delivered after passing quality control tests and can be customized upon request. For investors seeking high durability, minimal maintenance requirements, and world-class production performance, the BS-25 is a symbol of long-term profitability and reliability. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 2003, operating hours: 12,000 h, functionality: fully functional, ASCO BP407 – Automatic dry ice production machine for blocks, slices, and pellets Year of manufacture 2003 | 12,635 operating hours | Fully functional | Includes documentation and maintenance history For sale at DrDryice: an ASCO BP407 automatic dry ice production machine for the production of dry ice blocks, slices, and pellets. The machine is used, fully functional, and in good working order. The machine can produce slices in various thicknesses and pellets of 3 mm and 16 mm. The molds for the different product formats are integrated and are selected via the touchscreen. Manually changing the molds is therefore not necessary. Stated production capacity: up to approximately 400 kg per hour, depending on the chosen end product, block thickness, or pellet size. The previous user reported an actual production of 250–300 kg per hour. These are the capacity figures from the existing advertisement; the actual production depends on the operating conditions and product settings. maschinensucher.at Ndsdpfx Aboy R I Uqeysc Maintenance and operating hours The last maintenance service by ASCO was performed in December 2016, with a meter reading of 12,032 hours. After this maintenance service, the machine has only operated for another 603 hours. Total operating hours: 12,032 + 603 = 12,635 hours. The pump and cylinder have been replaced in the past. Documentation is available with the machine, including technical manuals and service reports. Used Machines The machine is offered with the available maintenance history and associated additional parts and spare parts. Origin and reason for sale The machine comes from a large industrial factory that has invested in a new production line and has switched to a different machine manufacturer. Due to this change in the production setup, the ASCO BP407 has been taken out of production and is now available for sale. This is a used, fully functional machine. Worldwide Shipping Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning

Condition: excellent (used), Year of construction: 2011, operating hours: 12,500 h, Ref:11160 . 2011 Muller Martini Acoro A5 Preparation Binder ONLY 12,500 HOURS WORKED! Preparation line for producing lined book blocks for hard cover production or soft bound books. Comprising: Nsdpfx Asz Izapsbysdc Triple hand feed element to spiral raceway element 3641 M.M. 3648 Twin end sheet feeders with Robatech hot-melt gluing M.M. Automatic motorised make-ready with “Commander” control system M.M. ‘Acoro A5’ binder with 20 x 21” Combi-clamps ICS 80 & ICS 30 Hot-melt pre-melt tanks Hot-melt spine gluing Hot-melt side gluing Gauzing/lining unit Pile/rotary cover feeder with pressing & nipping station 2nd nipping station Lay-down delivery unit to; Flat conveyor system (details on request) to; M.M. 3671 ‘Merit S’ automatic pile trimmer with auto setting. Specification: A5/21” Binder book sizes, Max: 430 x 320 mm Min: 140 x 100 mm Book thickness, : 3 -- 60 mm

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Ndjdozxgglopfx Abysc Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: used, The Nagema FBFC/1 is a heavy-duty, industrial Continuous Butter Making Machine (CBM) engineered for the commercial dairy sector. Manufactured by the historic German engineering brand Nagema, this machine processes bulk cream into high-quality butter via a fully continuous automated cycle. A detailed technical breakdown of the machine's specifications and functional systems is outlined below. ----- Technical Specifications - Production Capacity: Up to 2,500 kg/h of finished butter output. - Raw Material Suitability:Sweet / Cultured Cream: 45% to 50% fat content. - Sour Cream: 38% to 42% fat content. - Dimensions: Approx. 390 cm (Length) × 100 cm (Width) × 255 cm (Height). - Total Machine Weight: Approx. 3,100 kg. - Main Drive Motor (Beater): 22 kW to 30 kW operating at 650 to 1,950 rpm (manually adjustable via an external handwheel or modernized variable frequency inverter). - Auxiliary Drives:Auger feeder motor: 0.4 kW (925 rpm). - Raw material pump engine: 1.1 kW (2,760 rpm). - Water pump motor: 1.1 kW (2,760 rpm). - Integrated Centrifugal Pumps: 2x Nagema pumps with a maximum capacity of 13 m³/h. - Electrical Parameters: 380V / 50Hz, 3-phase power supply. ----- Structural Design & Materials - Hygienic Construction: All areas that come into contact with the product are made entirely of premium stainless chromium-nickel steel to satisfy strict food safety regulations. - Frame: Heavily reinforced painted steel, cladded completely with a stainless steel outer shell. - Controls: Simple, user-friendly control interface deployed directly on the machine body. Modernized variations often feature integrated variable frequency drives (VFD/Inverters) for smooth, digital speed management of the main churning drum. ----- Ndedpsz S Ni Ujfx Abyoc Step-by-Step Functional Sections The FBFC/1 achieves continuous production by arranging its mechanical processes sequentially within its horizontal frame: [[1]()] - The Churning Cylinder (Beater): Cream is continuously pumped into the front end of a cooling-jacketed cylinder. Inside, the high-speed rotating beater strikes the cream forcefully. This mechanical action rapidly disrupts the fat globule membranes, reversing the emulsion to separate raw butter grains from liquid buttermilk. - Separation and Additional Churning: The resulting mix moves into a designated separation block. The buttermilk is systematically drained and collected by integrated centrifugal pumps, leaving behind a concentrated formation of pure butter granules. - The Kneading Zone: Dual counter-rotating augers push the raw butter grains forward. This mechanical kneading forces out remaining pockets of buttermilk moisture, tightly binds the butter matrix, and distributes water particles evenly. This process ensures the exact moisture profile (ranging from 16% to 25% based on settings) before the final product exits the machine. - Outfeed Distribution: The dense, finished butter is continuously extruded from the mouthpiece, frequently feeding directly into bulk packing systems or automatic wrapping machines. Technical Data & Specifications - Machine Type: Semi-automatic auger-fed system - Maximum Output: Up to 150 to 151 cartons per hour (depending on operator speed) - Product...

Condition: used, functionality: limited functionality, input voltage: 400 V, input frequency: 50 Hz, Used Metabo PK 300 mobile table saw with various additional parts. Manufacturer: Metabo Model: PK 300 Nedsz Uh Syspfx Abyjdc Voltage: 400V (50Hz) Includes, among other things, a manual, extension cord, and guides.

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW Nodpfxez Hngmj Abysdc • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo . Usage: Frozen Block cutter for butter and similar products Nedpfx Aez Ht Ebjbysdc Electrics: 3~ / 400 v/50hz Air: 6 bar -8bar

Condition: good (used), functionality: fully functional, Petsmo (Finland) Titan breaker. Can include dolav box tipper as shown. Capable of running at 15-30 tonnes per hour depending upon material. Ndedpfx Aszx Icbebyoc

Condition: good (used), functionality: fully functional, Year of construction: 1980, 1 unit, used Concrete block-making machine Njdpe Ad Hdfofx Abysdc Manufacturer: ZENITH Maschinenfabrik GmbH Model: 913 H SVAF Year of manufacture: 07/1980 (July 1980) Location: Northern/Eastern Germany AVAILABLE IMMEDIATELY If interested, we look forward to receiving your price offers! Offer and prices are strictly net, ex-location. Subject to prior sale; errors and/or misrepresentations excepted. Sold without any guarantee and/or warranty; "as seen," in its current position (lying and/or standing). Any reproduction, reuse, publication, and/or copying of this offer—in whole or in part—is strictly prohibited!

Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Nodjxl S Uhspfx Abyodc

Condition: used, Year of construction: 2009, power: 800 kW (1,087.70 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 11,700 kg, nominal power: 800 kW (1,087.70 HP), input frequency: 50 Hz, input current: 950 A, ambient temperature (max.): 30 °C, We are offering this used Jenbacher JMS 412 GS-N.TE combined heat and power (CHP) unit, manufactured in 2009. Type: JMS 412 GS-N.TE Serial number: 6289001 Year of manufacture: 2009 Rated power: 800 kW Power factor: 1 Maximum operating altitude: 150 m Maximum ambient temperature (intake air): 30 °C Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 950 A Weight: 11700 kg Performance class: G2 The unit was only operated at 555 kWh by the previous owner, but we used it at 800 kWh. According to the data sheet, it is designed for 800 kWh operation. We operated the unit with natural gas. We are selling the complete unit in a soundproof container, including the exhaust heat exchanger and chimney. If you have any questions or need further information, please feel free to send us a message or call us. Njdpjz Ehc Eefx Abysdc

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,613 h, functionality: fully functional, machine/vehicle number: B4/19-002/LV, total height: 2,591 mm, total length: 2,990 mm, total width: 2,438 mm, fuel: liquefied natural gas (LNG), overall weight: 5,000 kg, type of cooling: water, empty load weight: 4,900 kg, Equipment: documentation/manual, As part of the demonstration, the compression in all cylinders can be shown to be 15 bar. Electrical power – 50 kWe Thermal power – 80 kW Gas consumption – 14.6 Nm3/h Engine manufacturer – MWM Number of cylinders – 4 Generator manufacturer – Marelli Type – MJB 225 SA4 Power – 62.5 kVA Rated power – 50 kW Nedez Rxgyepfx Abyedc Frequency – 50 Hz Voltage – 400 V

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS Ndodpfjwd Nw Tex Abyoc CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: used, Year of construction: 2000, functionality: fully functional, production capacity: 520 unit/h, Remaining part of the advertisement: We offer for sale a complete, fully functional production line designed for the manufacture of pallet supports from wood shavings. The line is currently in operation at a production facility and remains in continuous operation, allowing potential buyers to view it during the actual production process. Item for sale: A technological line used for the production of pallet supports molded from wood shavings and a binder, used in the production of transport and industrial pallets. Key advantages: • High repeatability of dimensions and product quality • Stable and proven production technology • Possibility of multi-shift operation • Low proportion of manual labor in the process • Ready for continued operation without the need for lengthy downtime. Technical condition: The line is currently in use and maintained in operational condition. All key equipment remains in good technical condition and is regularly serviced. This allows potential buyers to: • View the line in operation • Assess the quality of the produced supports • Verify the process efficiency under real production conditions • Familiarize themselves with the organization of the technological process. Scope of sale: The offered line includes the equipment necessary to conduct the production process, including, among others: • Raw material preparation system • Material dosing system • Forming and pressing equipment • Technological transport systems • Control and automation system • Auxiliary equipment related to the pallet support production process. Nsdjzt Iypjpfx Abysdc A detailed technical specification will be made available to interested parties. Possibility of presentation: It is possible to arrange a technical visit to the facility and view the line during normal production. Upon request, we provide additional technical information, photos, and video materials. Sales conditions: Location: Gorczenica Delivery date: to be agreed Form of sale: complete production line For further information or to arrange a presentation, please contact us: Contact person: We invite you to contact us and view the line during production. Thanks to the possibility of a "live" presentation, the buyer can accurately assess the technical condition of the equipment and the efficiency of the entire technological process.

Condition: used, Year of construction: 2016, operating hours: 32,318 h, functionality: unexamined, power: 30 kW (40.79 HP), Used Spanner HKA 30, year of manufacture 2016. The unit was fully operational. It has already been dismantled and is ready for collection. 30 kW electric Nsdpfozbnklox Abyjdc 73 kW thermal Operating hours: 32,318 Engine: GM 5.7L, non-turbo Includes complete control cabinet and numerous accessories.

Condition: ready for operation (used), functionality: fully functional, IMA butter block portioning and packaging machine for 50 g, 100 g, and 200 g butter blocks. The machine can be offered in its current condition or refurbished. Ndodpfx Aboz Sy Eyoysc

Condition: like new (used), Year of construction: 2022, operating hours: 30 h, Type : OPK 5800 -h / OBC5800 = same machine Min - Max lenght : 800 - 5800 mm, with infeed system. Njdozz Hunjpfx Abyodc Thikness : 75 - 100 mm Width : 75 - 150 mm Speed : Block lenght 75 mm = 45 blocks / min Engine size : 7,5 Kw Electric cabinet with PLC touch screen. For Pallet blocks or similar. Only 30 operating hours, like new all over.

Condition: used, This listing is for 1 of 2 Ortho Biovue System Heat block-32 Ndsdpfjxzh Rkex Abysc

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GRINDING DATA Grinding wheel diameter: 120 mm TABLE DIMENSIONS Table dimensions: 210 × 110 mm MACHINE DETAILS MACHINE DIMENSIONS Length: 1,000 mm Width: 500 mm Height: 1,100 mm Nodpfx Abj Ad Ivieyjdc MACHINE WEIGHT Weight: 150 kg

Condition: good (used), functionality: fully functional, Year of construction: 1994, 1 unit, used Concrete block-making machine Manufacturer: ZENITH Maschinenfabrik GmbH Model: 939 / AHZ Year of manufacture: 05/1994 (May 1994) Location: Northern/Eastern Germany AVAILABLE IMMEDIATELY If interested, we look forward to receiving your price offers! Offer and prices are strictly net, ex-works (ex-location). Subject to prior sale; errors and/or misrepresentations excepted. Sold without any guarantee or warranty; offered on an "as-is" basis (in its current condition and location). Any reproduction, further use, publication, and/or copying of this offer—in whole or in part—is strictly prohibited! Nodpfo Ad Hh Rex Abyjdc

Condition: ready for operation (used), AEG Double Grinding and Polishing Machine – Model DP 300/2200 -Operating voltage: 380 V -Motor power: 2.2 kW Ndedpsztaw Hsfx Abysc -Max. disc diameter: Ø 300 mm -Max. disc width: 50 mm -Polishing spindle speed: 1,400 rpm Dimensions: L x W x H 1.2 x 0.4 x 0.9 meters / Weight 180 kg Errors and omissions excepted.