Used Nitrogen for sale (331)

Year of construction: 1997, condition: ready for operation (used), Seho 8040 PCS with laminar and turbulent wave, preheating with heating plates and IR radiator, minimum quantity flux system, component cooler at the outlet, wave width: 400mm, max. usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, solder nozzle: Delta B, max. wave height: 8mm, solder volume: 400kg, heating capacity solder pot: 9kW, heating-up time 20-250°C: approx. 150min, heating-up time 190-250°C: approx. 60min, preheating zone length: 700mm, three heating zones: 3x 3kW, max. preheating capacity: 9kW, transport angle: manually adjustable, 6-8°, transport speed: 0.5-2m/min, running direction: from left to right, with loading aid/slide conveyor (1000mm), unloading aid (500mm) and entry stopper for solder frame separation, exhaust connection diameter: 2x 150mm, extraction capacity per connection: 500m³/h, supply voltage (50Hz): 230/400V, rated power: 31,000W, total connected load: 18.5kW, compressed air connection: R 1/4 inch (6 bar), nitrogen connection: R 1/4 inch (6 bar). With microprocessor control PCS 96, alphanumeric display & membrane keypad (16 lines of 40 characters), 100 soldering programs, interface for host computer with visualized machine overview & BDE data backup, interface for BDE data acquisition via serial printer, control loop for transport and heating. Length: 2300mm, width: 825mm, height: 1615mm, weight without solder filling: 400kg. Iiodpfsw Uk Aqsx Aacsh

Condition: used, TECHNICAL DETAILS - Belt width : 100 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen Iiodpfx Aju E U Tbjacjh - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: used, Year of construction: 2005, Overview  This aseptic PET filling line for fruit juices, beverages containing fruit juice and spritzers was built between 2005 and 2006 by the German manufacturer KHS. It is suitable for still and carbonated products (up to 5 g/l CO₂) - also with or without fruit fibers. The line covers all process steps from blowing to filling, labeling, packaging and palletizing and is designed for bottle sizes from 0.5 l to 1.5 l with various closure types. The nominal output is approx. 27,000 bottles per hour at 1.0 l still. The line will be in operation until approx. February/March 2026 and can be inspected by appointment. Technical details  Output: up to 27,000 bph at 1.0 l still Bottle sizes: 0.5 l - 1.5 l PET Products: Still beverages, carbonated up to 5 g/l, with or without fruit fibres Caps / neck finish: 26/22, 38 mm flat cap, sports cap possible Years of manufacture of the main machines: 2005-2006, individual units more recent (e.g. servo capper 2023, labeller 2013, winder 2017) Scope of delivery  Stretch blow molder KHS Blomax 16C (2005-2006), incl. chiller from Riedel Rinser KHS Bottle rinser FR-DR (ACF) 140 28/38 Filler KHS Innofill DNVF-PET ACF 100/15 SV, 100 filling stations, 15 capping stations, servo capper (2023) Nitrogen dropper from VBS, sterile tank, filling management from Eckel & Sohn, cap disinfection KHS Innoclean KR9 (flat cap) and SC4 Twin 28 S 04 (sports cap), cap disinfection KHS Innoclean KR9 (flat cap) and SC4 Twin 28 S 04 (sports cap). VBS, sterile tank, filler management KHS Metec Cap feeder Eckel & Sohn, cap disinfection KHS Innoclean KR9 (Flatcap) and SC4 Twin 28 S 04 (Sportscap) Cleanroom Cleanroom incl. ventilation system Fa. M&W, Zander/Smardt OPK Transport technology Container and air transport KHS, Lanfranchi Inspection Full bottle inspection Heuft Squeezer Labeling Krones Starmodul (YOM 2013) with Contiroll + 2x AutoCol units + dryer Krones Linadry Label inspection unit Heuft FinalView Packaging Tray/Shrink packer KHS Kisters Innopack TSP 050 V TPFO Wrap Around Packer KHS Kisters Innopack 320/70 (BJ 1999) Carry handle applicator KHS Carry Strip Master CSM 050- 2 Palletizing & wrapping Palletizer KHS Innopal Markant 1BSH2-PL + Innopal Markant 1BSH2/1-PL (both year 1999) Wrapper Haloila Octopus 1845S (year 2017, currently at a different location) Iodpfx Aajwzlb Neceih

Condition: used, PANalytical Iiedewycatepfx Aacjh PANalytical X’Pert PRO MPD X-ray Diffractometer (XRD) Excerpt from the service report: Device: PANalytical X’Pert PRO MPD Report date: 07.07.2021 Work performed: - Reinstallation and commissioning of the system - Connection of external supply lines - Warm-up phase - Complete alignment of goniometer and additional components - Maintenance carried out, including replacement of defective parts Spare parts used: L 3.6V NC/U3 R15.0X52.0 BATTERY. NI-CD FAN FOR X-CELERATOR UNIT FILTER, WATER Motor PW3050 ("Device was not tested in-house") The X’Pert PRO MPD is a highly versatile and powerful X-ray diffractometer (XRD) designed for structural characterization of crystalline materials. It is ideal for pure research as well as routine applications in industry and academia. Thanks to its modular design, fast detection, and control of temperature and atmosphere, it is excellently suited for both routine analyses and complex in-situ experiments. Key features: - Multiple measurement geometries possible: - Reflection measurements in Bragg-Brentano (θ–2θ) mode - Transmission geometry for powders in capillaries - Optional SAXS (Small-Angle X-ray Scattering) for nanostructure analysis - Radiation source and detectors: - Typically copper anode (Cu-Kα, λ ≈ 1.54 Å) - X’Celerator detector (1D, ultra-fast) for parallel data acquisition - Modular system with PreFIX technology: - Rapid change of optics and sample stages without recalibration - In-situ measurements at high temperatures: - Measurements up to approx. 1200°C possible - Controlled atmosphere: air, nitrogen, oxygen (limited for reducing atmospheres) Typical applications: - Phase analysis and quantitative Rietveld refinement - Determination of crystallite size, microstrain, residual stress - In-situ investigation of phase transitions, oxidation, crystallization, etc. - SAXS measurements for analysis of nanoparticles and pore structures - Broad range of sample types: powders, thin films, ceramics, pharmaceuticals, catalysts, and more Technical data (typical) Property & Specification Angle range (2θ): approx. 0.5° to 150° Step size: up to 0.002° or finer Goniometer: vertical, 0–0, radius approx. 240 mm Temperature range: room temperature up to approx. 1200°C Atmosphere: air, N₂, O₂ (limited for reducing atmospheres) Detectors: X’Celerator (1D), proportional counter Distribution & application areas: The X’Pert PRO MPD is in use worldwide at, for example: - Universities (ETH Zurich, TU Dresden, University of Vienna) - Research institutes (e.g., Max Planck Institutes, ICN2, IS2M) - Industry (e.g., materials development, pharmaceuticals, chemistry) Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: new, functionality: fully functional, Year of construction: 2025, power: 60 kW (81.58 HP), warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, Laser source – MAX Photonics Table size – 4000x2000 mm Control system – FSCUT 6000 Software – Cypnest + Cypcut Water chiller – Hanli Model: GR 4020 Power: 60,000 W Laser source: MAX Photonics Table size Straight cut: 4100 x 2450 mm Bevel cut: 3750 x 1800 mm Control system Straight cut: FSCUT 8000 Bevel cut: FSCUT 9100 Software: Cypnest + Cypcut Laser head: Boci BLT6/BLT4 Nitrogen proportional valve: SMC Water chiller: Hanli Power stabilizer: 400 kVA Load capacity: Up to 5,000 kg Laser power: 60,000 W X/Y positioning accuracy: ±0.1 mm/m X/Y repeat positioning accuracy: ±0.05 mm/m Maximum travel speed: 80 m/min Maximum acceleration: 0.8 G CNC control: EtherCAT-BUS Power supply: 380V 50Hz three-phase Servo motor power: X: 1.8 kW; Y: 5.5 kW*2; Z: 0.75 kW Power protection: Protection class IP54 External dimensions: 9700 x 4900 x 2350 mm Iiedpfx Aaow Ix Dcsceh Total machine weight: 12,500 kg Power consumption: 12kW: 78.25 kW/120 kVA 20kW: 112.25 kW/180 kVA Machine frame: welded steel Gantry crane: welded steel

Condition: ready for operation (used), Condition Used Stock Number 50299 This listing is for a Thermo Scientific Orion AQUAfast Colorimeter. The unit is in full working condition and is ready for immediate release. The Thermo Scientific Orion AQUAfast Colorimeter is a robust and versatile multi-parameter instrument designed for efficient water and wastewater analysis. With over 90 pre-programmed methods, including tests for key nutrients such as total nitrogen and total phosphate, this colorimeter offers precise and reliable results for a wide range of testing needs. Ideal for both laboratory and field use, the AQUAfast colorimeter features automatic wavelength selection, a waterproof design, and user-friendly features to simplify and enhance the testing process. Key Features: Rugged Waterproof Design: With an IP67 rating, this colorimeter is built for durable performance in challenging environments, making it perfect for both field and laboratory applications. Extensive Preprogrammed Methods: Includes over 90 preprogrammed methods for common water and wastewater parameters, such as total nitrogen and total phosphate, ensuring easy and accurate testing for a variety of needs. Automatic Wavelength Selection: The colorimeter automatically selects from 6 LED wavelengths (430, 530, 560, 580, 610, and 660 nm) to match the optimal wavelength for each test parameter, improving efficiency and accuracy. Isdpfxsu Hu Two Aacjih Countdown Timer: The built-in countdown timer ensures precise and consistent timing for all tests, helping users achieve repeatable results with ease. Data Storage: Capable of storing up to 1000 test results with a date and time stamp for easy data management and review. Long Battery Life: Enjoy extended operation with up to 26 hours of continuous use or 3500 tests, making it ideal for long fieldwork sessions. Multilingual User Interface: The interface supports multiple languages, including English, French, German, Italian, Polish, Portuguese, and Spanish, making it accessible for a wide range of users. Compatible with Thermo Scientific Orion Reagents: Use with Thermo Scientific Orion reagents ensures high accuracy and consistency in test results. Specifications: Wavelengths: 6 LED wavelengths (430, 530, 560, 580, 610, and 660 nm) Preprogrammed Methods: Over 90 methods for common water/wastewater analysis Data Storage: 1000 readings with date/time stamp Battery Life: Up to 26 hours continuous use or 3500 tests User Interface: Multilingual (English, French, German, Italian, Polish, Portuguese, Spanish) Waterproof Rating: IP67 Countdown Timer: Yes, for precise test control Dimensions: Portable and lightweight for field use (exact dimensions available on request)

Year of construction: 2001, condition: ready for operation (used), Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible. Iisdpfsw Uk A Rsx Aacjh

Year of construction: 1995, condition: used, machine/vehicle number: 14165 / 14166 / 14167, Capacity: 6 m³/h Pressure: 16 bar Pressure head: 34 m Iisdpfx Ascq Uggsacsh Speed: 2.750 rpm Connection: 1.530 W max. temperature: 25° C Description: Pump system consisting of three identical pumps; Pressure tank for nitrogen 8 litres, 16 bar, up to 70° C condition: very good weight: Dimensions: 800 x 400 x 600 mm

Condition: good (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, degree of automation: semi-automatic, laser type: CO₂ laser, pipe diameter (max.): 230 mm, pipe length (max.): 160 mm, input frequency: 50 Hz, type of cooling: water, overall weight: 9,800 kg, total length: 13,600 mm, total width: 4,900 mm, total height: 2,550 mm, Hello, I am offering for sale a Bodor brand CNC Laser - The laser operates on oxygen and nitrogen - Automatic edge detection (Edge Seeking), centering chucks (Center Finding) - Bodor Genius T laser system with autofocus function - Control system: Bodor Thinker - Automatic lubrication, water cooling, gas-saving smooth-flow nozzles, intelligent maintenance reminders, optional BodorCloud system - Minor cosmetic damage to the control panel, but fully functional - Yaskawa SIGMA 7 servo drive - Maximum tube diameter: 230mm - Maximum tube length: 6500mm - Maximum profile size: 160x160mm - Maximum workpiece weight: 200kg, 30kg/m Iisdpfxow Ticte Aacjh - Positioning accuracy: 0.05mm - Repositioning accuracy: 0.03mm - Y-axis speed: 100m/min - X-axis speed: 40m/min

Condition: excellent (used), Here we offer you a Jeol scanning electron microscope. Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope with newly developed electron optics and intuitive, graphical user interface (GUI) under Microsoft WindowsXP Professional. Magnification range: 5 X - 300,000 X Accelerating voltage 0.3 - 30 kV Tungsten hairpin cathode (LaB6 cathode optional) large fully motorized sample stage with eucentric tilting, incl. Graphic navigation on the sample holder Easy sample navigation by click center zoom Image field controlled navigation via 2 navigators Relative coordinate navigation Saving and restarting of specimen positions Adjustable blldschnittswelses movement of the specimen stage Field correction during rotation via computer-controlled eucentric eccentric rotation Image field correction during tilting via computer-controlled controlled eucentric tilting Calculation of the possible tilt angle on the basis of the sample geometry automatic focus tracking when moving the specimen in specimen in Z-axis Intelligent limit switches for the motorized axes Travel of specimen stage: x=125mm Y=100mm z= 5 to 80 mm (continuous) T= -10°C to+ 90°C R= 360°C (endless) Secondary electron detector for high vacuum operation Novel, superconical objective lens guarantees high image resolution image resolution even at large tilt angles Guaranteed resolution In SE image: 3 nm at 30 kV and 15 nm at 1 kV Simultaneous live image display of multiple detectors Easy sample navigation through Cllck Center Zoom Powerful image measurement functions Movie function for recording dynamic processes Versatile sample chamber with numerous free flanges, e.g. for EDX, WDX, EBSD, cathodoluminescence etc. Low-maintenance and low-wear, quiet pump system consisting of backing pump, vibration-free high-likelihood diffusion pump and electromagnetic valve control Extensive fault protection against faulty operation and failure of external media Ergonomic, height-adjustable system table SEM starter kit consisting of 2 specimen holders, tool set and 6 spare cathodes Additional equipment 2x ΜΡ-43100 (TMP) Turbomolecular pump Iisdpfsmn Rcqox Aacsh instead of the standard diffusion pump When a turbomolecular pump is used, cooling water is no longer operation of the SEM, cooling water is no longer required. Further equipment: PC for control of the SEM incl. TFT monitor ΟΧ200 Bruker Quantax 200 EDX system EXTENDED Nitrogen-free, energy dispersive X-ray analysis system. incl: SDD detector with 127 eV or better energy resolution. Detection of all elements from boron upwards Vibration free, maintenance free. Peltier cooled (nitrogen free) Pulse processor TFT monitor Spectra measurement and elemental diflcultation Fully automatic, quantitative, standard-free elemental analysis Image acquisition Superfast qualitative LIneScan Superfast qualitative element mapping Data management and archiving system Report generation and results output Data communication Installation and training HyperMap Multipoint analysis Bruker xFlash Detector (SDD) with Signal Processing Unit SVE III Type: Jeol JSM-6490 Scope of delivery: (See photos) Condition: used / used (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer for you on the phone.

Year of construction: 2006, condition: used, functionality: fully functional, The unit is refrigerant-free and fully filled with nitrogen. Including control cabinet. Specification: Iisdpswu A Dusfx Aacoh Flow rate: 315 m3/h Permissible operating pressure: 17 bar The Reisner chiller, equipped with two Bitzer compressors of the type KWR W250KS, is a reliable and efficient solution for air conditioning and cooling in industrial applications. The system is characterized by its robust construction and high performance to ensure constant and stable temperatures. With the powerful Bitzer compressors, the chiller provides efficient cooling performance with low energy consumption.

Condition: ready for operation (used), Condition Used Stock Number 51136 This listing is for a Grant Controlled Rate Freezer - CRF-1 The unit is in full working condition and is ready for immediate release Product Overview: The CRF-1 Liquid Nitrogen-Free Controlled Rate Freezer is designed for precision-controlled freezing and cryopreservation of biological samples, such as embryos, stem cells, mammalian cells, spermatozoa, antibodies, tissue sections, and rodent organs. Unlike conventional liquid nitrogen-based freezers, the CRF-1 is liquid nitrogen and cryogen-free, eliminating contamination risks and making it suitable for use in cleanrooms and barrier facilities. It offers superior performance in terms of cell viability post-freezing and poses no fire hazard, unlike alcohol-based systems. The CRF-1 allows for highly accurate, reproducible, and controlled freezing rates, crucial for the cryopreservation of biological samples, ensuring optimal recovery upon thawing. Key Features: Cryogen-Free Design: The CRF-1 is free from liquid nitrogen and alcohol, offering a safer, cleaner alternative to traditional freezing methods. No contamination risk, making it ideal for use in sterile environments. Precise Cooling Control: The cooling rate is accurately controlled, especially for the critical nucleation/seeding phase, which ensures consistent and optimal recovery of cells. Wide Temperature Range: Capable of cooling down to -100°C with straws, offering a broad application range for biological cryopreservation. Simple Operation: The CRF-1 operates with or without a PC, and it can log data via PC software. Cooling profiles are displayed directly and can be customized. High Versatility: Compatible with cryovials, straws, bags, microplates, and Matrix-96-well block plates, allowing for research across multiple areas like stem cell research, transgenic embryos, mammalian cells, and more. Low Operational Costs: The CRF-1 runs at approximately 1% of the cost of liquid nitrogen-based freezing systems. Safety Features: Includes an optional Un-interruptible Power Supply (UPS) for complete cycle continuation in case of power failure. Compact Quiet: Fits neatly on a bench-top and operates quietly, making it suitable for laboratory settings. Main Applications: Transgenic embryos research Stem cell research Clinical and research samples like lymphocytes and tissue cell lines Mammalian cell preservation (e.g., cardiomyocytes, adipose, liver, muscle) Cord blood-derived stem cells Adherent cells and stem cells in microplates Cell suspensions in numbered/barcoded arrays Isdpfxewdbphj Aacjih Robotic integration for high-throughput applications Veterinarian IVF applications Technical Specifications: Dimensions (w x d x h): 264 x 367 x 445 mm Weight: 9.8 kg Max Plate Temperature: 30°C Min Plate Temperature: -80°C (standard) or -100°C (dependent on model) Temperature Accuracy: ±0.5°C Temperature Stability: ±0.1°C Temperature Uniformity: ±1.0°C Max Cooling Rate: 10°C/min Max Temperature Stabilization Time: 5 minutes Key Benefits: Accurate and Reproducible Cooling Rates: Ensures controlled freezing rates and precise sample temperature management. Customizable Cooling Profiles: Choose from linear and non-linear profiles, or create your own tailored profile. No Cryogen or Liquid Nitrogen: Ideal for reducing contamination risk and the cost of liquid nitrogen. Low Running Costs: Estimated to cost only 1% of traditional liquid nitrogen-controlled freezing methods. End-of-Cycle Cooling Stability: Maintains a steady

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Iiodpfx Asu S Ahqeaceh Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Condition: ready for operation (used), machine/vehicle number: J2E5021200, Condition Used Stock Number 47386 This listing is for a Pierre Guerin Technologies EVO 50-60L Fermenter. The unit is in full working condition and is ready for immediate release. Please see spreadsheet attached at the bottom of listing for all parts included with this unit. The Pierre Guerin EVO Series fermenters and bioreactors are precision-engineered systems designed for advanced bioprocess research, development, and small-scale production. These mobile, Sterilize-In-Place (SIP) and Clean-In-Place (CIP) units are optimal for applications ranging from educational settings and RD to pilot-scale productions within GLP or GMP environments. They are versatile and suitable for various culture types, including yeast, bacteria, fungi, or cell cultures, operating in batch, fed-batch, continuous, or perfusion modes (with appropriate accessories). Key Features: Vessel Design:Capacity Configuration: Working volume of 50-60L with a total volume of erial Surface Finish: High-grade 316L stainless steel, with an internal surface finish of Ra ≤ 0.8 µm and pipework Ra ≤ 1.6 µm, ensuring sterility and rilization Temperature Control: Double jacket for automatic media sterilization and precise culture temperature rating Pressure: Maximum vessel pressure of 4 barg, jacket pressure up to 6 dplate Design: Removable flat headplate for easy access and maintenance. Agitation System:Drive Type: Available in mechanical coupling with a single seal or magnetic coupling with a synchronous drive for reduced contamination eller Configuration: Standard setup includes one HTPG4 impeller, one Rushton impeller, and one baffle, providing optimal mixing for various culture ed Range: 30 to 1200 RPM with precision que Monitoring: Integrated system for monitoring agitation performance. Instrumentation Control:Measurement Control:Temperature: PID-controlled temperature tation Speed: Precise real-time : Online monitoring and automated ₂ (Dissolved Oxygen): Optical probe-based real-time monitoring and m Level: Automatic detection and antifoam ght Measurement: Integrated load cell al or Viable Cell Density Measurement: Optional high-accuracy sensors tune Control System:Graphical Interface: Intuitive touchscreen Compliance: 21 CFR PART 11 GAMP 5 anced Process Control: Includes profile management, real-time calculations, and automation ote Monitoring Data Logging: Supports Ethernet™ network integration for remote supervision and maintenance. Iisdpfx Aov I Hy Ujacoh Gas Fluid Management:Gas Control: Automatic control of air, oxygen, nitrogen, and CO₂ istaltic Precision Dosing Pumps: Integrated system for nutrient and pH ia Addition Sampling: Dedicated ports for sterile sampling and automated feed control. Cleaning Sterilization:SIP (Sterilize-In-Place): Automated sterilization (Clean-In-Place): Fully integrated system for effortless cleaning between cifications:Nominal Working Volume: 50-60 litersMinimum Working Volume: 35 litersTotal Volume: 75 litersAgitation Speed Range: 30-1200 RPMMaterial: 316L stainless steel with Ra ≤ 0.8 µm finishPressure Ratings: Maximum operating pressure 2 barg for vessel and 2.5 barg for rilization: SIP CIP capabilityControl System: Neptune SCADA-based, remote monitoring readyGas Control: Automated sparging system for O₂, N₂, CO₂, and airPumps: Integrated peristaltic dosing feed pumpsProcess Modes: Batch, Fed-Batch, Continuous, Perfusion Parts List: Brochure:

Condition: used, Leco LECO C230 CARBON ANALYZER Carbon analyzer C230 The LECO C230 carbon analyzer is a microprocessor-based, software-controlled instrument for measuring the carbon and sulfur sulfur content in metals, ores, ceramics and other inorganic inorganic materials. The C230 uses an induction furnace and measures carbon by infrared absorption. The infrared (IR) source consists of nichrome wire, which is heated by heated to 8500 °C by resistance heating. The IR source emits visible energy and all wavelengths of the infrared spectrum Carbon dioxide can be used for the description; the same principle applies to sulphur detection. Carbon dioxide absorbs IR energy at a specific wavelength within the IR spectrum. within the IR spectrum. Energy from the IR source is absorbed, when the gas flows through the cell, preventing it from reaching the IR detector. An IR cell is used both as a reference and for measurement. Total carbon in the form of carbon dioxide is detected continuously and simultaneously. The initial reference level or baseline for the detector is set by passing oxygen through the cell. established by passing oxygen through the cell to drive out residual atmospheric gases. Technical data: Gas required: Carrier gas: Oxygen 99.5 % pure, 40 psi Pneumatic gas: Compressed air, nitrogen or argon, 40 psi (2.76 bar), Source must be free of oil and water Gas flow (based on nominal analysis time) Measurement: 3 liters per analysis Pneumatic: 1 liter per analysis Regulator Oxygen: 501-291 O 2 pressure regulator Compressed air: 766-036 Compressed air regulator Iiodpfxju Ndyxj Aacsh Inert gas: 764-216 Inert gas regulator Furnace: Induction, 18 MHz, 2.2 kW Data transmission: Included Data storage Without PC: 10 sample weights, 50 responses, 5 methods Without PC: Internal membrane /External optional display Without PC: Liquid crystal (16 x 26 characters) Power requirement Determinator: 230 Ṽ̃̃, ± 10 %, 50/60 Hz, Single-phase, 15 amps max. Operating current: 12 A Standby current: 4 A Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), Condition Used Stock Number 47290 This listing is for 1 of 4 Pierre Guerin Technologies EVO 10-20L Fermenters. The unit is in full working condition and is ready for immediate release. Iiodpfx Aev I Hzfoacoh Please see spreadsheet attached at the bottom of listing for all parts included with this unit. The Pierre Guerin EVO Series fermenters and bioreactors are designed for precision in bioprocess research and development. These mobile, SIP (Sterilize-In-Place) and CIP (Clean-In-Place) units are ideal for applications ranging from educational settings and RD to pilot-scale productions within GLP or GMP environments. They are versatile and suitable for various culture types, including yeast, bacteria, fungi, or cell cultures, operating in batch, fed-batch, continuous, or perfusion modes (with appropriate accessories). Key Features Vessel Design:Capacity Configuration: Working volume of 10-20L with a total volume of erial Surface Finish: High-grade 316L stainless steel, with an internal surface finish of Ra ≤ 0.8 µm and pipework Ra ≤ 1.6 µm, ensuring sterility and rilization Temperature Control: Double jacket for automatic media sterilization and precise culture temperature rating Pressure: Maximum vessel pressure of 2 barg, jacket pressure up to 2.5 dplate Design: Removable flat headplate for easy access and maintenance. Agitation System:Drive Type: Available in mechanical coupling with a single seal or magnetic coupling with a synchronous drive for reduced contamination eller Configuration: Standard setup includes one HTPG4 impeller, one Rushton impeller, and one baffle, providing optimal mixing for various culture ed Range: 30 to 1200 RPM with precision que Monitoring: Integrated system for monitoring agitation performance. Instrumentation Control:Measurement Control:Temperature: PID-controlled temperature tation Speed: Precise real-time : Online monitoring and automated ₂ (Dissolved Oxygen): Optical probe-based real-time monitoring and m Level: Automatic detection and antifoam ght Measurement: Integrated load cell al or Viable Cell Density Measurement: Optional high-accuracy sensors tune Control System:Graphical Interface: Intuitive touchscreen Compliance: 21 CFR PART 11 GAMP 5 anced Process Control: Includes profile management, real-time calculations, and automation ote Monitoring Data Logging: Supports Ethernet™ network integration for remote supervision and maintenance. Gas Fluid Management:Gas Control: Automatic control of air, oxygen, nitrogen, and CO₂ istaltic Precision Dosing Pumps: Integrated system for nutrient and pH ia Addition Sampling: Dedicated ports for sterile sampling and automated feed control. Cleaning Sterilization:SIP (Sterilize-In-Place): Automated sterilization (Clean-In-Place): Fully integrated system for effortless cleaning between cifications:Nominal Working Volume: 10-20 litersMinimum Working Volume: 7 litersTotal Volume: 23 litersAgitation Speed Range: 30-1200 RPMMaterial: 316L stainless steel with Ra ≤ 0.8 µm finishPressure Ratings: Vessel 2 barg, Jacket 2.5 bargSterilization: SIP CIP capabilityControl System: Neptune SCADA-based, remote monitoring readyGas Control: Automated sparging system for O₂, N₂, CO₂, and airPumps: Integrated peristaltic dosing feed pumpsProcess Modes: Batch, Fed-Batch, Continuous, Perfusion Parts List: *only 1 out of the 4 units is supplied with a Nuova General Instruments 2883/D10/C-FMP Safety Pressure Valve Brochure:

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss climate chamber water-cooled (test room explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST ROOM Technical data: Iisdpov Ewy Hjfx Aacjh Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Test room capacity: approx. 600 liters Cold / heat operation -70 to 180°C Climate operation 10 – 95°C Humidity 10...98% r. H. Temperature change per time Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A On-site fuse: 32 A slow-blow Permissible test item weight Total load of the grate supports 80 kg Test room floor 80 kg, grate insert 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (The air conditioning system's evaporator has been replaced) For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Iodpfx Aaoqzgvhocjih Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Zwick / Roell Temperature chamber for AllroundLine Here we offer you a Zwick / Roell temperature chamber for AllroundLine. Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range - 80°C to + 250°C Traceable test results and perfect integration of the temperature chamber into the test system. External dimensions: Depth 1050 mm Width 600 mm, Height 800 mm Internal dimensions: depth 530 mm width 450 mm, height 650 mm Temperature chambers for the AllroundLine Cooling by means of LN2(liquid nitrogen) -80°C connection to external, is not included) Type: EC75A-1-0-1-0 Condition: used / used Iiodpfx Aek Rutpsacsh Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 Ijdpeqy Edyofx Aacjih External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), EOS Isdpjubxkmofx Aaceih Type: P385 similar to a P390 Laser has been renewed and is unused! Plastic laser sintering system for the direct production of series, spare parts, functional prototypes and samples for investment casting or vacuum casting. Machine description: Condition of the machine/system: Dimensions: System P385 (dimensions 2000x1220x1250) Cooler (dimensions 930x610x600) Control panel (dimensions 1580x950x800) Control cabinet (dimensions 2100x610x950) Technical data: Effective construction volume 340 mm x 340 mm x 620 mm Construction speed (depending on material) up to 31 mm/h Layer thickness (depending on material) 0.06 – 0.10 – 0.12 – 0.15 – 0.18 mm Support structure not required Laser type CO 2 , 50 W Precision optics F-Theta lens Scan speed up to 8 m/s Power supply 32 A Maximum energy consumption 10 kW / typically 2.4 kW Integrated nitrogen generator (optional) Compressed air supply at least 5,000 hPa; 6 m³/h Voltage: 3/N/PE/ 400 V AC Frequency: 50/60 Hz Modified surface module from a heated nitrogen flood Connection value: 12 kW Rated short-circuit current: 5 kA Fuse: 3x 32 A Current consumption: 18 A Max. laser power (10.6µm) 100 W Laser class open 4 Laser class closed 1 Weight: approx. 1,060 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the areas of research and development. It is an excellent addition to the existing FTIR series, which covers the standard laboratory area, among other things. AIM-8800 specifications Optics: 15 x Cassegrain objective 15 x Cassegrain condenser mirror with inlet for flushing MCT detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 - 720 cm -1 Type 2 - 5000 - 650 cm -1 Electrically activated aperture XY Θ directional drive. The setting of the XY direction increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum setting value: 3µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30mm Resolution: 1 µm pitch Sample thickness: Reflection mode - ≤ 40mm Iisdpfxsf I Ew Hs Aacsh Transmission mode - ≤ 10mm Operation via the keyboard of the main unit Measurement mode selection / XY stage operation (4-step speed control) / manual focusing / illumination control (Optional) Control via PC Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture setting / Aperture preview / Measurement position and aperture setting recording (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540mm x H520mm x 36kg Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Here we offer a PINK vacuum drying oven. Vacuum drying oven PINK Space required for operation and maintenance Width min. 3000 mm Height min. 2500 mm Depth min. 2500 mm Dimensions VT External dimensions: Width approx. 1170 mm Depth approx. 1380 mm Height approx. 1615 mm Total height 1970 mm Interior dimensions: Width approx. 360 mm Depth approx. 735 mm Height approx. 300 mm Vacuum chamber volume 79 liters Operating temperature min. 20 °C max. 150 °C Electrical connection Connected load 3 x 400 V; 50 Hz N / PE 8.5 kVA Heating capacity 6 kW Cooling capacity 6 KW at 15 °C media temperature and 15 °C cooling water Heating: Floor, ceiling, side walls and door double-walled, flooded with thermal medium Heat transfer medium: Mobiltherm 32 heat transfer oil Filling quantity approx. 20 liters depending on the length of the pipework Compressed air pressure 6 bar Nitrogen N2 pressure Nitrogen N2 pressure Allowable operating overpressure: Vacuum chamber -1 / +0.1 bar Heating system 3 bar Weight: 300 kg Type: PINK VT 300-600-300-1 Condition: gebraucht / used Scope of delivery: (PINK VT 300-600-300-1, operating instructions) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Ijdpodf Rw Ssfx Aacsih

Condition: as good as new (ex-display), Year of construction: 2018, Zwick / Roell Type: EC76G 1-1-2-0 361763 Description: Zwick / SFL Severn Furnaces Limited Zwick/Roell temperature chambers for tests in the temperature range - 80°C to + 250°C Traceable test results and perfect integration of the temperature chamber into the test system. Temperature control chambers: width 600 mm x height 1000 mm Temperature control chamber for the AllroundLine Cooling using LN2 (liquid nitrogen) (-80°C external connection, not included) Voltage: 400/230 16A 3N〜50/60Hz Power: 4500W Iodjlguwwspfx Aacoih Weight: 180 kg Condition: unused Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used Iodpfxeqzgvaj Aacsih (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.