Used Bnc for sale (32)

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, machine/vehicle number: 1511151394, turning length: 1,500 mm, turning diameter: 650 mm, spindle bore: 82 mm, spindle speed (max.): 2,400 rpm, overall weight: 4,300 kg, The machine was used without any restrictions or known defects until it was decommissioned. The original purchase price of the machine was EUR 79,000! TECHNICAL DETAILS Turning length: 1,500 mm Turning diameter: 650 mm Spindle bore: 82 mm Spindle speed range: 80 - 2,400 rpm MACHINE DETAILS Dkjdpfx Afeymay As Uji Weight: 4,300 kg Drive power: 35 kVA Frequency: 50 Hz Full load current: 52 A Number of phases: 3 + PE Short-circuit protection: 25 kA Nominal voltage: 400 V Max. load current: 520 A EQUIPMENT Documentation / Manual

Condition: ready for operation (used), Year of construction: 2004, overall weight: 3,000 kg, number of axes: 3, This 3s Challenger BNC 1840 horizontal turning machine was manufactured in 2004. It is equipped with an electric four-position tool post and features a Schunk ROTA-S-Plus 250-62 chuck in excellent condition. Additionally, two custom-made chucks and a steady rest are included. Consider the opportunity to buy this Challenger BNC 1840 horizontal turning machine. Contact us for further details. Dodpfxjyhnymo Af Uski • Electric four-position tool post • Center height: 230 mm • Center distance: 1,000 mm • Spindle mount: CAMLOCK D1-6 (DIN 55029) • Cutting control: constant cutting speed (CSS) • Gross weight: 3,350 kg • Hour meters: not available (no machine or spindle hour meter) • Documentation: original documentation and operating manuals included Additional equipment • Schunk ROTA-S-Plus 250-62 chuck (excellent condition) • Two custom-made chucks • Steady rest

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,650 mm, spindle motor power: 15,500 W, total height: 2,050 mm, total width: 2,225 mm, overall weight: 4,400 kg, controller manufacturer: FANUC, controller model: Oi-TC, product length (max.): 3,690 mm, number of axes: 2, Horizontal turning machine manufactured in 2008. This MONDIALE BNC-2260XL features a maximum turning length of 1500 mm and a swing over bed of 550 mm. It includes a bar capacity of 69 mm and a maximum workpiece weight of 2000 kg. If you are looking to get high-quality turning capabilities, consider the MONDIALE BNC-2260XL machine we have for sale. Contact us for further details regarding this machine. • Swing over bed: 550 mm • Swing in gap: 790 mm • Swing over cross slide: 310 mm • Max. turning length: 1500 mm • Bar capacity (hyd. chuck cylinder): 69 mm (91 mm option) • Gap length from spindle nose surface: 283 mm • Max. workpiece weight (with tailstock): 2000 kg • Spindle speed range (choice 1): 80–3500 rpm (82 mm bore) • Spindle speed range (choice 2): 80–2400 rpm (82 mm/106 mm bore) • Spindle nose: A2-8 / D1-8 (82 mm); D1-8 / A1-11 (106 mm) • Spindle hole diameter: 82 mm (std.) / 106 mm (option) • Main motor power: 11/15.5 kW (std.) / 15/22 kW (opt.) • Number of tool stations: 8 • Tool shank: 40 mm • Turret indexing time: 0.42 s (BARUFFALDI) • X/Z axis rapid traverse: 15 m/min • Positioning accuracy: 0.005 mm • Repeatability: 0.005 mm • X axis feed motor torque: 9.3 Nm • Z axis feed motor torque: 14.8 Nm Dodpfeyrq T Rox Af Uoki • Ballscrew X axis: 32×5-C5 • Ballscrew Z axis: 45×10-C5 • Tailstock quill stroke: 150 mm • Tailstock quill diameter: 80 mm (std.) / 100 mm (opt.) • Tailstock quill taper: MT 5 • Coolant pump motor: 450 W • Coolant pump capacity: 55 L/min • Lubrication pump motor: 25 W Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2010, turning diameter 475 mm turning length 1500 mm control Fagor 8055T Revolver 8 turning diameter over slide 240 mm turning dia. in gap 710 mm length of gap 350 mm spindle passage 51 mm turning speeds 100-4500 U/min Power 7/11 KW 3-jaw chuck 250 mm steady 230 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Dsdpjyqv S Nefx Af Uoki than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2008, turning diameter 890 mm turning length 3000 mm turning diameter over slide rest 550 mm control Fagor 8055i ATC Revolver 8 tail stock MK 6 turning dia. in gap 1220 mm Djdpeyqwaujfx Af Ueki length of gap 450 mm spindle passage 106 mm turning speeds 15-1480 U/min 3-jaw chuck 400 mm steady 300 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: not inspected (used), Year of construction: 1989, We are offering, as part of an insolvency liquidation: 2 x CNC lathes (1 x sub-spindle, 1 x lower turret), used + Bar feeder + Accessories 1. CNC Lathe with Sub-Spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - Bar feeder HYDROBAR - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC Lathe with 2 x turrets Dkedpfox Ed A Dsx Af Uji Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T Bar feeder HYDROBAR - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 collets - Approx. 40 sets of jaws - Various tool holders + tools - Documentation The machines are untested, but were in operation until the end. The machines have been dismantled and the price includes loading.

Condition: not inspected (used), Year of construction: 1989, We are offering, as part of an insolvency liquidation: 2 x CNC lathes (1 x sub-spindle, 1 x lower turret), used + Bar feeder + Accessories 1. CNC Lathe with Sub-Spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - Bar feeder HYDROBAR - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC Lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T Bar feeder HYDROBAR - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 collets - Approx. 40 sets of jaws - Various tool holders + tools - Documentation The machines are untested, but were in operation until the end. Dsdpjym Tidefx Af Uoki The machines have been dismantled and the price includes loading.

Condition: good (used), Year of construction: 2007, CNC lathe MICROTURN CHALLENGER BNC 1840, year 2007. Control: FARGO 8055i/A, tool turret VDI 40 / 8 positions, chuck diameter 250 mm. Spindle mount: CAMLOCK D1-6. Center height: 230 mm. Turning length: 1000 mm. Spindle bore: 65 mm. Spindle speeds: 100–4500 rpm. Further data available in the data sheets. Coolant system installed. The machine is in good condition and can be demonstrated under power. Machine documentation available. Accessories: tool holders, jaws for the chuck. Dkjdpoyhzg Defx Af Usi

Condition: used, Year of construction: 2007, turning length 1500 mm control FAGOR 8055i/A TC centre height 230 mm greates pass round over bed 475 mm swing diameter over slide rest 240 mm Dodov Hhv Uepfx Af Uoki bed width 355 mm max. workpiece weight 1500 kg spindle bore 65 mm spindle turning speed range 100-4500 U/min weight of the machine ca. 3,15 t required space 3,51 x 1,80 x 2,02 m

Condition: used, Year of construction: 2006, turning diameter Ø30/300mm mm Dkedpjugnxdjfx Af Usi turning length 3055mm +/-0.3mm mm

Condition: ready for operation (used), A cycle-controlled CNC lathe Microcut of the BNC series is available. Turning length: 2000mm, chuck diameter: 400mm, turning diameter over bed/cross slide: 610mm/330mm, spindle speed: 2500rpm, tool positions: 8. Machine dimensions X/Y/Z: approx. 4000mm/2300mm/1800mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible. Djdjxr Nvispfx Af Uski

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,634 h, functionality: fully functional, machine/vehicle number: 051116206, turning length: 1,000 mm, rotational speed (max.): 4,000 rpm, bar passage: 52 mm, controller model: Fagor 8040 TC, TECHNICAL DETAILS Dodpjycu Igofx Af Ujki Swing diameter over bed: 450 mm Swing diameter over cross slide: 215 mm Turning length: 1,000 mm Bar capacity: 52 mm Spindle speed: 4,000 rpm MACHINE DETAILS Control unit: Fagor 8040 TC Dimensions & Weight Machine dimensions (L x W x H): 3,000 x 1,995 x 2,001 mm Machine weight: approx. 2,400 kg Operating hours: 20,634 h EQUIPMENT 4-position tool holder Tailstock Documentation

Condition: excellent (used), Year of construction: 2012, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 1311151215, turning diameter over cross slide: 870 mm, turning length: 2,000 mm, turning diameter: 400 mm, spindle bore: 72 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 268 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 15 W, overall weight: 4,700 kg, coolant supply: 8 bar, tailstock quill stroke: 200 mm, number of driven tool stations in tool turret 3: 8, tool holder type of tool turret 1: VDI 40, Equipment: CE marking, USB port, centralized greasing system, type plate available, Machine in very good condition with C-axis and driven tools, Renishaw tool probe. Tool turret with 8 positions, all driven. Chip conveyor, oil mist separator. Three driven angle tool holders, three driven straight tool holders. 6 VDI40 tool posts, 2 steady rests, tailstock with hydraulic quill. Fagor 8055 control, RS, USB, and Ethernet (RJ) interfaces. DTR machine documentation, Fagor 8055 programming manual in English and Polish, PC communication software. Machine under power in Poznań, inspection arrangement possible. Tel. 602-58-23-51 Dkodpfxjx Tclpo Af Uoi

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,500 mm, turning diameter over bed slide: 475 mm, rotational speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,680 mm, Placing a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Control: Fagor CNC 8055 Turning diameter over recess: 710 mm Turning diameter over cross slide: 240 mm Turning diameter over bed: 475 mm Max. turning length (with turret): 1,500 mm Spindle Bar capacity: 51 mm Recess of spindle nose: 248 mm Spindle nose: ASA D1-6 Spindle bore: 65 mm Speed range: 100 - 4,500 rpm Spindle power: 11 kW Max. torque: 29.3 kgm Tool handling Tool positions: 8 Square tool shaft height: 25 mm Shaft diameter for boring bar: 40 mm Tool holder: VDI 30 Indexing time: 0.42 s Travel paths X-axis: 260 mm Z-axis: 1,680 mm Rapid traverse speeds Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 15 m/min Tailstock Max. workpiece weight (with tailstock): 1,500 kg Tailstock quill taper: MK 5 Quill range: 150 m Djdpev Ifw Sefx Af Uoki Quill diameter: 80 mm Quill taper: MK 5 Bed width: 355 mm X-axis motor: 7.3 Nm Z-axis motor: 11.9 Nm Chuck dimensions: 200/4,000 mm MACHINE DETAILS Dimensions (L x W x H): 3,520 x 1,935 x 2,022 mm Weight: 3,150 kg Foundation: 2,920 x 2,055 mm No additional tools or clamping devices included.

Condition: new, Cesurbend Tube Bending Machine / Pipe Bending Machine PBNC-38 Technical Specifications Max. tube diameter (mm): 38 Max. wall thickness (mm): 2 Max. bending angle (°): 190 Tube bending speed (rpm): 8-10 Max. bending radius (mm): 250 Tube length (mm): 2500 Bending motor power (kW): 3 Dkjdpfsxt Rctox Af Uei Hydraulic motor power (kW): 1.5 Machine width (mm): 1400 Machine length (mm): 3250 Machine height (mm): 1200 Machine weight (kg): 700 Features • 4-position adjustable gauge • Option to use mandrel and spoon on NC machines • The carriage system is equipped with a linear guide rail and carriage • Connection equipment is standard. Mandrel and spoon are optional. • 7" color touchscreen display • 5 sequential twisting options • 100 program memory capacity • Omron PLC control

Condition: new, Cesurbend Mandrel Tube Bending Machine / Pipe Bending Machine PBNC-51 Technical Specifications Max. Tube Diameter: 51 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7-10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Length (mm): 3000 Bending Motor Power (kW): 5.5 Dsdpfjxt Rc Tsx Af Uoki Hydraulic Motor Power (kW): 3 Machine Width (mm): 1400 Machine Length (mm): 4215 Machine Height (mm): 1450 Machine Weight (kg): 1600 Features • In this process, the jaw clamps the tube after it is inserted into the machine. The tube is bent over the die to half its diameter. When using a mandrel and wiper, better results are achieved for bends requiring higher quality, with thinner wall thickness and smaller radii. • This is a three-piston machine with a hydraulic spool located behind the hydraulic boom.

Condition: new, Cesurbend CNC Tube and Pipe Bending Machine PBNC-51 A Technical Specifications Max. Tube Diameter (Mild Steel): 51 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Speed (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Length (mm): 4000 Bending Motor Power (kW): 5.5 Hydraulic Motor Power (kW): 3 Machine Width (mm): 1300 Machine Length (mm): 5750 Machine Height (mm): 1500 Machine Weight (kg): 2000 Features • On our standard NC machines, distance and rotation after bending are handled via operator assistance and parallelism devices. • Using our machines equipped with the NC Car System, you can monitor bend progress and rotational positions, enabling faster and error-free bending. Dodpfxjxvzr Rs Af Ueki

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-90 A Technical Specifications Max. Tube Diameter (mild steel): 90 mm Max. Tube Wall Thickness (mm): 4 Max. Bending Angle (°): 190 Tube Bending Rate (d/min): 3-6 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Loading Length (mm): 3000 Bending Motor Power (kW): 15 Hydraulic Motor Power (kW): 5.5 Machine Width (mm): 1400 Machine Length (mm): 4500 Machine Height (mm): 1600 Machine Weight (kg): 3000 Features Dkodpfsxvzurjx Af Uoi • On our standard NC machines, the distance and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend more quickly and accurately by monitoring the progress and rotational positions of the bends carried out with our machines equipped with the NC Car System.

Condition: new, Cesurbend Mandrel Bending Machine / Tube Bending Machine PBNC-65 Technical Specifications Max. Tube Diameter (mild steel): 63 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Min. Bending Radius (mm): 45 Tube Length (mm): 3500 Bending Tolerance (mm): ± 0.25 mm Bending Motor Power (kW): 7.5 Hydraulic Motor Power (kW): 4 Oil Tank Capacity (L): 50 Machine Width (mm): 1450 Machine Length (mm): 4250 Machine Height (mm): 1200 Machine Weight (kg): 1600 Dsdpfxext Rdwe Af Uski Features • 4-way adjustable gauge • Chain bending system • Gear motor • Touchscreen control panel • Foot pedal operation • Hydraulic mandrel movement • Hydraulic damping function • Hydraulic compression function • Hydraulic pusher • Four cylinders • 7" touch color display • 15 sequential twist positions • 100 program memory capacity • Omron PLC control

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-65 A Technical Specifications Max. tube diameter (mild steel) 63 mm Max. wall thickness (mm) 3 Max. bending angle (°) 190 Tube bending speed (d/min) 7-10 Max. hydraulic pressure (bar) 200 Max. bending radius (mm) 250 Min. bending radius (mm) 45 Tube length (mm) 4000 Bending tolerances (mm) ±0.25 mm Bending motor power (kW) 7.5 Hydraulic motor power (kW) 4 Oil tank capacity (l) 50 Machine width (mm) 1500 Djdpexvzt Usfx Af Uski Machine length (mm) 6200 Machine height (mm) 1500 Machine weight (kg) 2000 Features • The machine is equipped with 5 cylinders • On our standard NC machines, positioning and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend faster and error-free by monitoring the progress and rotational positions of bends carried out with our machines equipped with an NC Car System.

Condition: new, Working area round 360 mm Working area quadrant 360 x 360 mm Working area bundle W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Hydraulic saw blade tensioning Dodjqrqvhspfx Af Ueki Multiple feed 500 mm Drive power 3.7 kW Machine size LxW 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment - Hydraulically controlled full-stroke double clamping system. - Driven by IE3 motor with inverter (PMSM, Euate IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vice - Two-piece front vice - Stepless speed control by inverter - Hydraulic blade clamping - Roller bearings with hydraulically controlled carbide blade guide system - Automatic working height control through quick start sensor - Preset cutting counter with cut-off function - Nesting device for bundle cutting (hold-down device) - Power-operated blade cleaning brush - Saw blade monitoring with regard to standstill and blade breakage - Flushing hose for machine cleaning - Work light - Roller table with 2 m length - One M42 bi-metal saw blade - One set of tools and one toolbox

Condition: used, Three-phase motor, electric motor -Power: 1.5kw -Speed: 940 rpm -Shaft: Ø 28 mm -Construction: B3 Dodpjchq Idsfx Af Ujki -Protection class: IP 54 -Number: 1x available -Dimensions: 400/270/H220 mm -Weight: 24kg

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Dkjdpfx Aoxztydef Usi Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: new, Year of construction: 2025, saw band length: 3,920 mm, saw band width: 34 mm, Double column bandsaw fully automatic Everising H-260 HB Cutting range round: 0 - 260mm Cutting range square: 300 x 260mm Bundle tension: Width: 145 - 190mm Bundle tension height: 30 - 130mm Drive power: 3.7 kW Saw blade dimensions: 3920 x 34 x 1.1mm Weight: 1759 KG Machine dimensions: 2170 x 2100mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw band tensioning - Saw band guides (incl. band back guide) made of carbide Dedpfxjq Ulxyo Af Ueki - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic belt breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Condition: new, Year of construction: 2023, saw band length: 5,450 mm, saw band width: 41 mm, Double column bandsaw fully automatic Everising H-460 HB Cutting range round: 0 - 460mm Cutting range square: 460 x 460mm Bundle tension: Width: 195 - 310mm Bundle tension height: 120 - 230mm Drive power: 5.5 kW Saw blade dimensions: 5450 x 41 x 1.3mm Weight: 3030 KG Machine dimensions: 2820 x 2190mm The standard equipment of the machines is as follows: Solid steel construction in double column principle Dkodoq Ulxgjpfx Af Uoi - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw band tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic belt breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.