Used Programmer for sale (1,656)

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Codpsdz Sraofx Agzjpw Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Cpjdpfxedz Srbs Agzew Weight: 23 kg good condition 2 pieces available, price per piece

Condition: used, This listing is for a Atas Optic 2 Programmable Injector GC Cpodpoxzhrzjfx Agzsw

Condition: good (used), Year of construction: 2008, Weiler DZ 40, year of manufacture 2008, Siemens 840 D control, travel X/Z 200/350 mm, turning diameter 180 mm, max. swing diameter 560 mm, Y axis +/- 25 mm, Q axis / programmable tailstock, Q axis travel 360 mm, Q axis measuring system rotary, tailstock MK 4, main spindle max. bar capacity 42 mm, spindle bore 52 mm, rapid traverse X/Z/Q 30/30/20 m/min, turret 16 stations – all driven, VDI 25, shank diameter 25 mm, driven tools up to 4,500 rpm, part catcher, accessories, driven tool holders, fixed holders. Cedpfx Asydvfpjgzopw

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: RP-3AH-S62(robot) | CR1-571-S62 (controller), overall weight: 32 kg, load capacity: 3 kg, arm reach: 335 mm, controller manufacturer: Melfa, controller model: CR1-571-S62, input voltage: 230 V, repeat accuracy: 0.008 mm, Equipment: documentation/manual, Used Mitsubishi RP-3AH Melfa industrial robot, complete with controller and documentation. Manufacturer: Mitsubishi | Melfa Year of manufacture: 2006 Model: RP-3AH-S62 (robot) | CR1-571-S62 (controller) Voltage: 230 V (50/60 Hz) Maximum load: 3 kg Includes manuals for both robot and controller, programming instructions, software CD, and power cables. Csdpfxex Tqhxs Agzepw

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Cpsdpfx Aody Hrdsgzew Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: new, Telemecanique TSX TPE01 Prom Programmer, unused in original packaging, 100% functional, scope of delivery as per photos Cedoxah T Aopfx Agzjpw

Condition: ready for operation (used), Melexis PTC04 Programmer Rev: 2.5 SN:42160105, used, in good condition, 100% functional, scope of delivery as shown in the photos. Cedpjx Et Irsfx Agzjpw

Condition: ready for operation (used), Melexis PTC04 Programmer Rev: 2.5 SN:42160133, used, in good condition, 100% functional, delivery as shown in the photos. Cpedpfx Aex Et Ixogzsw

Condition: ready for operation (used), Melexis PTC04 Programmer Rev: 2.6 SN: 34170296, used, in good condition, 100% functional, delivery as shown in the photos. Cedpjx Et I Ejfx Agzspw

Condition: new, Year of construction: 2022, PFO 3D-2 HAL Highest productivity - Highly dynamic and highly accurate 3D scanner with lightweight mirrors, with which applications up to 8000 W can be realized - Incl. documentation, transport packaging and spare parts catalog Numerous interfaces - For robot communication in "on-the-fly" operation Sensor recording for quality monitoring Cpodpfstt Eb Djx Agzew - Process monitoring (e.g. connection of photodiodes, camera or pyrometer) is possible on the PFO TruControl 1000 control system incl. PFO software - Optimum synchronization between laser and processing optics - For simple control and operation of the laser device and the PFO either via a control panel or an external PC - 24x digital I/O interface, expandable with fieldbus interfaces such as ProfiBus, DeviceNet and many more - Storage option for 199 laser programs Maximum process reliability - Integrated crossjet for maximum protective glass service life - Highest repeatability of process results thanks to minimization of the metal vapour effect (MDE) by special nozzle Vision Line Basic - Digital camera image with crosshairs in the laser focus for observation of the workpiece and teaching - With scanner optics, the effect of chromatic aberration is minimized aberration is corrected for all positions in the processing field - Integrated algorithm for simple calibration - Convenient touchscreen operation - Still image / live image - Saving of images TruTops PFO - Offline software for 3D programming - Network connection to TruControl - Enables the programming of different wobble methods wobble methods

Condition: as good as new (ex-display), PFAFF 8320 - 111/101 long-arm version with table Cpsdpfx Agexa D Hrjzjw

Condition: excellent (used), Year of construction: 2014, Ref:11063 . 2014 Schneider Senator ‘S-Line’ 115H. Very low usage machine - only 320,000 cuts! High speed 115 cm guillotine with; Cedpfx Ageypgt Ujzopw Central stainless steel air table with blower Stainless steel air tables left & right Micro-computer programme (up to 5,700 steps) TFT colour monitor with soft keypad plus external programmable memory card Programme correction for print variation (linear & %) Variable pressure hydraulic clamp via display Twin hydraulic bottom knife drive giving more powerful cutting and less wear Illuminated cutting area 2 high speed steel knives I.R. light beam guarding with ‘FFM’ (UK HSE spec) Central lubrication Auto knife change from the front of the machine Including tools & manuals. Specification: Cutting width, Max: 115 cm Feed depth, Max: 115 cm Clamp opening, Max: 17 cm Side table width, Max: 43.6 cm Smallest cut (auto) : 35 mm/ 1.38” (manual) : 25 mm/ 0.98”_ Power required : 7.5 kW Clamp pressure : 300 – 3,700 daN

Condition: used, KAPP Model AS 203, Serial No 263.18.11, Year 1972 Wet Hob Sharpener for Hobs up to 200mm OD x 440mm. Fully Automatic and Programmable. Straight and Helical Gash Cpsdeyrrqkepfx Agzsw

Condition: used, MORI SEIKI SL-45MC-1500, 3-AXIS CNC LATHE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-45MC-1500 CONTROL FANUC 15T WITH FAPT, LED SCREEN Csdpsymmqbjfx Agzopw CHUCK DIA 400mm SWING 670mm BETWEEN CENTRES 1700 mm SPINDLE BORE 120.0 mm SPINDLE SPEED 2,500 RPM, 4 SPEED GEARBOX TURRET 12 STATIONS, DRIVEN TURRET RAPIDS X: 12,000 mm/min Z: 15,000 mm/min TAILSTOCK INCLUDED, PROGRAMMABLE PLUS NEW “SCHUNK” SMW QUICK CHANGE CHUCK (WORTH 20,000 GBP) C-AXIS AND DRIVEN TOOLS HYDRAULIC STEADY FULL SET OF MANUALS MIST COLLECTOR VERY GOOD RANGE OF TOOLING NEW SWARF CONVEYOR IN EXCELLENT WORKING ORDER

Condition: excellent (used), Year of construction: 2019, operating hours: 460 h, functionality: fully functional, machine/vehicle number: 283-307, input voltage: 400 V, compressed air connection: 8 bar, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), Fully automated 5 colours textile screen printing machine with 12 stations (Made in Germany), with 5 x Flash Cure Dryer from Chiossi e Cavazzuti Spot Easy, made in Italy. Drying Tunnel, made in UK. Original Equipment Cost €59,750. Excellent programmes allowing multiple options. Example you require a double hit print, programme alloes print 1st colour at first station, move to drying station then send back to first station for second hit of first colour image. and so on. Machine only used 20% of time, so in really good condition. Support available from Manufacturer Heinz Walz. 1. Full set of Aluminium Pallets for bags supplied with machine. 2. Pallets for Clothing available from Heinz Walz 3. With electrically driven squeegees, with fine adjustment. Print size 480 x 500 mm 4. With electrically driven rotation and pneumatically driven lifting system. 5. Digital microprocessor PLC controller with Membrane key pad and 5,7” display control panel in different languages. Standard equipment * Digital microprocessor PLC controller Codoyk Du Sopfx Agzopw * Membrane key pad and 5,7” display control panel in different languages * Printing in automatic modus or through a foot pedal, one impulse, one print. * Pneumatic screen clamping system * Control membrane keypad on each printing station * Dual air cylinders squeegee system * Frontal screen loading * Indexing table servo driven * Lift system pneumatically driven * Squeegee electrically driven * Squeegee pressure individually adjustable * Four different printing programs + one flock program. * ½ index and double index * Clock wise or anti clock wise rotation * Off contact of the screens individually adjustable * Registration: ± 0,025 mm

Condition: excellent (used), Overview Now available from Glendale is this Morgana AutoCreaser 33, a refurbished machine fully serviced by our trained engineers. It delivers precise, consistent creasing for digital and litho printed material, preventing cracking on heavier stocks. The AutoCreaser 33 can produce up to nine creases in a single pass and handles stock from 100gsm up to 400gsm (0.4mm) at speeds of 3850 sheets per hour. Its compact, mobile design allows a single operator to load and collect sheets with ease, while programmable settings and job memory make repeat work quick and simple. Main Features Fast and easy machine setup Fully automatic creasing operation Up to 9 creases per sheet in one pass Cpjdpeyrpacefx Agzew Handles stock up to 0.4mm (approx. 400gsm) Speeds up to 3850 per hour 0.1mm micro adjustment for precise crease positioning Memory function for storing repeat jobs Adjustable crease depth and squareness Creasing without cracking digital print Compact footprint with fully mobile design Why Choose the AutoCreaser 33 Refurbished and fully serviced by trained engineers for reliable performance Prevents cracking on digitally printed and heavier stocks Produces up to 9 creases per sheet in a single pass, saving time Automated operation reduces manual setup and increases productivity Programmable memory for quick recall of repeat jobs Compact and mobile design allows easy operation by a single operator Consistently accurate results for professional-quality finishing Specifications Manufacturer Morgana Model AutoCreaser Condition Used Stock Number 114989 Max sheet size 330 x 630mm Min sheet size 140 x 210mm Min distance between crease 3mm Micro adjustments 0.1mm Paper weights 100gsm to 400gsm (0.4mm) Speeds up to 3850 per hour Machine weight 148kg Electrical requirements 230v 50/60Hz

Condition: used, Year of construction: 2007, Fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloading when the mortising cycle is finished. The complete movement, clamping and, mortising cycle is fully automatic. X, Y and, Z axis movements are all via re-circulating ball and screw drives and using linear slideways to give maximum positioning accuracy. Thanks to the programmable Z axis it is possible to produce off line mortises, double mortises or produce thicker mortise slots with the same chisel. Programming is very simple thanks to the 'user friendly' graphic touch screen controller were programs can be memorised and stored under a number or specific name up to 8 characters. The swing chisel cutter itself produces a very clean mortise slot and if required for deep mortises up to 3 depths of cut can be programmed to give a 'woodpecker' type cutting operation. Other programming options include working off either the face of the timber or the thickness and the possibility to produce mirror image components (left/right hand) in one program. Csdpfxeymnbno Agzepw Year - 2007 CE X axis stroke 1100mm. Y axis stroke 250mm. Max. depth of cut 120mm (depending on chisel size) Z axis stroke 100mm Max. workpiece height of 120mm. All movements on re-circulating ball and screw drive with brushless motor Max. workpiece width 200mm Max. swing chisel thickness 20mm. Min . slot length 25mm approx (with swing chisel) Min. slot thickness 6mm. 3 vertical pneumatic clamps. 3 horizontal pneumatic clamps. 4 hp main motor. 'Power 1000' touch screen graphic controller with 99 programs each with 50 lines. USB key facility. Programmable speed for cutting depth. Anti splinter guards with air blowers and dust extraction points. Working table dimensions 1210mm x 215mm Air supply 6 bar / 470 l/min consumption. Fitted with separate dedicated programmable hollow chisel head for producing the small mortises for glazing bars

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: Codjtqfv Iopfx Agzspw - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: used, Year of construction: 2018, Cursal TRSI 8000 AP Automatic Crosscut Saw With Integrated Pusher - 2018 CE Durable and versatile automatic crosscut saw with exceptional speed and accuracy. Impressive speed and accuracy CNC programmable sequential cutting capabilities Optional loading and unloading Specification : 6000 mm In feed capacity, push feed crosscut Saw Single-block structure: the frame made of welded - worked steel Pneumatic side-aligner installed before of the blade Pneumatic blade-press with mobile casing: stroke 150 mm. Breaking press-wheels with horizontal axis installed after blade Cutting height on the guide: 120 mm. Width of the boards: min. 40 - max. 250 (300) mm Automatic cutting control managed by the computer Vertical alternated blade movement: pneumatic system with totally controlled stroke Saw blade HM steel with alternate teeth Ø 500 mm, hole Ø 35 mm - Z=120 Blade motor HP 7,5 with automatic brake Cedsxxvqtspfx Agzopw Cutting time: adjustable from 0.3 to 2 seconds CNC unloading belt with 2 programmable ejectors 2018 CE

Condition: excellent (used), functionality: fully functional, working width: 3,070 mm, sheet thickness (max.): 6 mm, Equipment: CE marking, Used EDWARDS PEARSON Model VE – 3000mm x 6mm guillotine for sale Cpsdpfxoyna Rqe Agzjw Hydraulic Guillotine Shear for sale Type 04 Capacity: 6.5mm x 3070mm Including Programmable front operated powered back gauge. Front Supports & Squaring Arm. 3metre x 6mm guillotine

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, Equipment: CE marking, Used Cnc folder Ras XL Center 63.30 cnc folder up down folder 3metre For Sale Cpsdpfx Ageym T Iaszsw Capacity: 126-inch / 3.2 metre (3,200 mm) folding length and can handle up to 16-gauge (1.5 mm) mild steel. Bi-directional Folding: The machine folds parts both up and down, which minimizes material handling by the operator and increases production speed. Precision Technology: It is equipped with five servo-regulated motors for high-speed operation and includes programmable gripper positions for creating tapered or conical parts. Software Control: Features a multi-touch PC control system where operators can draw profiles directly on the monitor; the software then automatically calculates the folding sequence and provides 2D/3D simulations. Design Flexibility: Offers 300 degrees of free space in front of the folding beams, allowing for the creation of complex part designs that standard machines might struggle to accommodate.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111254, MACHINE SPECIFICATION Table size 660mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102-610mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 20 tools Approximate weight 3220Kg MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control Swarf auger Cpodpfx Asyrrx Ujgzow Filtermist extraction system 10 off assorted BT40 toolholders Programmable coolant nozzle Automatic lubrication system Lighting Enclosed guarding

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Cpedpfjq Atxysx Agzjw Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Coolant system Lighting Interlocked guarding  

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105876, SPECIFICATION Csdpfxox Sq Sbj Agzspw Table size 914mm x 356mm Maximum table load 1316Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0 -8,100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 + 1 tools Tool to toll time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual Feed cutting time 11,436 hours