Used Nitrogen for sale (353)

Year of construction: 2025, condition: new, New OS-60-NX Nitrogen PSA Generator with the delivery for 65.0 Nm³/h at 7 bar (g) and a purity of 99.9 % (Other interpretations on request) Requirements for the compressed air supplied on site: Volume flow 3.7 m³/min Pressure 9 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Ihsdpfx Asvyq S Ssg Uot Specification of Nitrogen Obtained: Volume: 65.0 Nm³/h Nitrogen pressure: 7 bar (g) Purity: 99.9% Equipment: Nitrogen Generator OS-60-NX Compressed Air - Pressure Dew Point Sensor Compressed Air - Pressure Sensor Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Year of construction: 2025, condition: new, New OS-40-NX Nitrogen PSA Generator with the delivery for 43.9 Nm³/h at 6 bar (g) and a purity of 99.9 % (Other interpretations on request) Requirements for the compressed air supplied on site: Volume flow 2.5 m³/min Pressure >8 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 43.9 Nm³/h Nitrogen pressure: 6 bar (g) Purity: 99.9% Ihjdpfx Ajw Dqdbjg Uot Equipment: Nitrogen Generator OS-40-NX Compressed Air - Pressure Dew Point Sensor Compressed Air - Pressure Sensor Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Year of construction: 2025, condition: new, New OS-225-NX Nitrogen PSA Generator with the delivery for 505.2 Nm³/h at 5 bar (g) and a purity of 98.0 % (Other interpretations on request) Requirements for the compressed air supplied on site: Volume flow 20.21 m³/min Pressure 7 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 505.2 Nm³/h Nitrogen pressure: 5 bar (g) Purity: 98.0% Equipment: Nitrogen Generator OS-225-NX Compressed Air - Pressure Dew Point Sensor Air-Purity-Control Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Iedpfx Aowa I Ebeg Ueht Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: used, Year of construction: 2017, overall weight: 375 kg, total length: 675 mm, total width: 805 mm, total height: 1,290 mm, TECHNICAL SPECIFICATIONS - Modular nitrogen generator for wine applications - Model : TERA M020 - Output pressure : 12 bar.g max - Max air pressure : 12.5 bar.g - Filtration : 0.01 µm - Oil: < 0.01 ppm - Dew point under pressure : - 44 °C - Power supply : 230 V / 50 Hz - Power rating : 100 W - Protection rating : IP55 - Ambient temperature -10° C / + 50° C Iedsv Uk E Ijpfx Ag Ueht - Connections - Inlet: 3/4 - 1/2’ outlet - Reference : 007357 DIMENSIONS - Length : 675 mm - Depth : 805 mm - Height : 1290 mm - Weight : 375 kg

Year of construction: 2025, condition: new, functionality: fully functional, Purity: 99.999 Ihsdpfsxn Upyjx Ag Ujt Capacity: 21.3 m3/h

Condition: excellent (used), Netzsch Model: Netzsch TG 209 F3 Tarsus NETZSCH Proteus® Software for Thermal Analysis included. Description: For sale is a NETZSCH TG 209 F3 Tarsus thermogravimetric analyzer (TGA) manufactured in Germany. This device is used in laboratories, research, development, and quality control for thermogravimetric analysis. Thermogravimetry measures the change in mass of a sample as a function of temperature and time. This method serves, among other purposes, for assessing thermal stability, decomposition processes, moisture and solvent content, as well as filler and ash fractions. The TG 209 F3 Tarsus is a robust, high-precision instrument designed for industrial and research applications—not a hobby or DIY device. Typical fields of application: - Plastics and polymer analysis - Chemical & pharmaceutical industry - Materials research - Quality control - Research & development Software / Data Analysis: The scope of delivery includes NETZSCH Proteus® software for thermal analysis. The Proteus® software is used for device control, data acquisition, and evaluation of thermogravimetric measurements (TGA). Key features include: - Control of measurement programs (temperature profiles, heating rates, dwell times) - Recording of mass changes as a function of temperature and time - Graphical representation of measurement curves (TG, DTG) - Evaluation of decomposition stages, mass losses, and residual masses - Data export for documentation and further processing The software package includes (see photos): - Original NETZSCH Proteus® installation media - Printed software and device documentation - NETZSCH USB dongle (hardware license key) System requirements (according to documentation): - Microsoft Windows 7 / 8.1 / 10 (Professional or Enterprise) Technical specifications (approximate values): Manufacturer: NETZSCH (Made in Germany) Model: TG 209 F3 Tarsus Measurement principle: Thermogravimetric Analysis (TGA) Temperature range: Ambient to approx. 1000 °C Iodsyamzaspfx Ag Ueht Heating rate: approx. 0.1 – 50 K/min Max. sample weight: approx. 1 g Balance resolution: up to approx. 0.1 μg Gas operation: Air / Inert gas (e.g., nitrogen) Mains voltage: 230 V AC / 50–60 Hz (switchable to 115 V) Power consumption: approx. 1.0 – 1.2 kW Dimensions (W×D×H): approx. 45 × 55 × 35 cm Weight: approx. 40 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Netzsch Type: DSC 200 F3 Maia® Measuring Device NETZSCH DSC 200 F3 Maia® with Intracooler 40 Differential Scanning Calorimeter incl. accessories Description / Scope of Functions A DSC is used for the thermal analysis of materials. It measures the heat flow that occurs in a sample during physical or chemical processes when it is heated or cooled in a controlled manner. The device enables the investigation of the following material properties, among others: - Melting and solidification temperatures - Glass transition temperatures (Tg) - Crystallization - Phase transitions - Reaction enthalpy - Heat capacity - Purity determination of substances Typical fields of application: - Materials research & development - Plastic and polymer analysis - Metal and alloy analysis - Chemistry, pharmaceuticals, ceramics Ijdpfeyaatpjx Ag Ueht - Quality assurance & laboratory analytics The Intracooler 40 enables active cooling below room temperature without the need for liquid nitrogen and significantly extends the temperature range. Scope of delivery (as pictured): - NETZSCH DSC 200 F3 Maia® measuring device - NETZSCH Intracooler 40 - Original measuring and handling tools - Calibration and reference materials (indium, tin, bismuth, zinc, aluminum, silver – approx. 400 mg each) - Several original packs of DSC crucibles (aluminum, 25 µl) - Original transport and storage boxes - Comprehensive NETZSCH original documentation (user manuals, instrument manuals, software manuals) - NETZSCH Proteus® software incl. data carrier and USB dongle Technical data (excerpt) DSC 200 F3 Maia® Power supply: 230 V / 50 Hz Power consumption: approx. 500–800 W Temperature range (with Intracooler 40): approx. -40 °C to +600 °C (depending on configuration) Measuring principle: Differential Scanning Calorimetry (DSC) Intracooler 40 Power supply: 230 V / 50 Hz Current consumption: 2 A Refrigerant: R507 Protection class: IP21 Max operating pressure: 24 bar Dimensions & weight (approx.): DSC 200 F3 Maia®: Dimensions (W × D × H): approx. 60 × 45 × 25 cm; Weight: approx. 35–40 kg Intracooler 40: Dimensions (W × D × H): approx. 30 × 40 × 50 cm; Weight: approx. 30 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) If you have further questions, we would be happy to answer them by phone.

Condition: used, This listing is for a CS Cleaver Scientific LTD The Cube Dry Bath - 01 TCDB----- Cleaver Scientific TCDB – The Cube Dry Bath The Cleaver Scientific TCDB, known as "The Cube Dry Bath", is a compact, digitally controlled dry bath incubator designed for accurate and efficient sample heating in laboratory environments. It is ideal for a variety of applications, including enzyme reactions, nucleic acid denaturation, and other temperature-sensitive protocols. ----- Technical Details Condition: The TCDB is in excellent working condition with minimal use. Specifications: Model: Cube Dry Bath Incubator (Single Block Unit – Block Not Included) Voltage: 240V (unit spec), also listed as 110V, 50–60 Hz – please verify power compatibility Temperature Range: 5°C above ambient to 150°C Temperature Stability: ±0.2°C Temperature Uniformity: ±0.2°C Incremental Control: 0.1°C Timer: Up to 99 hr : 59 min, with continuous operation option Heated Power: 125W Controller: Digital Microprocessor Controller Weight: Approx. 2.1 kg Block Material: Molded Aluminum Alloy Block Dimensions: 79 x 104 x 50 mm Display: Dual LCD (temperature & time shown simultaneously) Safety Features: Leak-proof chamber, over-temperature protection, SSR fault detection Includes: Cleaver Scientific TCDB Cube Dry Bath Power Cord ----- Applications Ideal for use in: Restriction enzyme digestion DNA denaturation Coagulation studies Ihsdpfxoxzh Shs Ag Uet Melting agar Hybridization procedures Hot Start PCR® BUN (Blood Urea Nitrogen) assays Incubation with water (mini water bath functionality)

Condition: ready for operation (used), Year of construction: 2009, operating hours: 69,572 h, overall weight: 10,100 kg, total height: 2,010 mm, number of axes: 3, This 3-axis AMADA LC 3015 F1 NT CO2 laser cutting machine was manufactured in 2009. It has a mass of 11.4 tons and requires 98 kVA of power, with a laser capacity of 4.0 kW. If you are looking to get high-quality cutting capabilities, consider the AMADA LC 3015 F1 NT machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Power required: 98 kva • Capacity: 4 kw • Laser resonator: af4000i-b • Transformer: marx tg 516 Extra Information Machine with transport box (L x W x H): 7120×3150×2370 mm Weight (with transport box): 13,500 kg Laser Resonator (L x W x H): 2460×1140×1965 mm Laser Resonator Weight: 1,300 kg Combined Unit (L x W x H): 2332×1638×2201 mm Combined Unit Weight: Approximately 1,750 kg Transformer (L x W x H): 950×800×950 mm Transformer Weight: 484 kg Pallet Changer (L x W x H): 3868×2352×1010 mm Pallet Changer Weight (without liftable ball supports): 2,450 kg Pallet Changer Weight (with liftable ball supports [option]): 3,500 kg Electrical Connections Total Power Connection of the System: 400 V / 127 KVA Transformer Power Connection: 400 V / 89 kVA / 160 A Combined Unit Power Connection: 400 V / 38 kVA /55A Laser Resonator Power Connection: 200 V / 55 KVA Control and Drives Power Connection: 200 V / 34 kVA Operating Voltage: 3×400 V(±10%)/PE/50 Hz Max. Current Draw: 55 A Transformer Rated Power: 89 KVA Transformer Rated Primary Voltage: 3×400 V(±10%) Transformer Rated Secondary Voltage: 3×200 V Transformer Rated Primary Current: 132 A Ihsdpsx D Enlsfx Ag Ujt Transformer Rated Secondary Current: 257 A Compressed Air and Gas Requirements Total Compressed Air Requirement (air not used as cutting gas): 7 bar; 69.6 m 3/h Total Compressed Air Requirement (air used as cutting gas): Max. 9.7 bar; 132.6 m 3/h Compressed Air for Machine Functions ("Cooling Cut" and "Oil Shot"): 6 bar; 18 m 3/h Compressed Air for "ECO CUT": 6 bar; 18 m 3/h Compressed Air for Fume Extraction System DELTAComp 1500-8/9: 5 bar; 5.6 m 3/h Laser Gas Consumption: 10 liters per hour Cutting Gases: Oxygen, Nitrogen, and compressed air (if used as cutting gas) are required. Environmental and Location Requirements Operating Room Temperature: +15 to +35 °C Room Height: At least 4 m Lighting: At least 500 Lux Humidity: Less than 75% (without dew condensation) Vibrations: Must be resistant to seismic acceleration below 0.05 G (0.49 m/s 2) with an amplitude below 5 µm. Foundation Load Capacity: ≥49 kN/m 2

Condition: excellent (used), JBT Stein All Purpose Batter dipper, 400mm wide. Has only been used in a test facility. The complete line is available - consists of two batter dippers, preduster, crumber, batter mixer, fryer, oil tank and nitrogen tunnel. Iedpfx Aox Nbd Asg Ujht

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Ihodpfxjx R D Efj Ag Uet Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 1998, Manufacturer: Zanchetta (Romaco Group) Model: Rotolab Year : 1998 Iodpfx Aox R A Ifsg Ueht Type : High shear granulator mixer Capacity : 2 Litres Opening : lid Double heating jacket Crumbler = 1500 rpm Variable mixing speed : 20 – 955 rpm Heating integrated into the double jacket. Max. Max. bowl temperature 85°C, Heating jacket Connection for vacuum and nitrogen (.), Materials: Stainless steel Operating pressure: 0.6 MPa Becker vacuum pump: 1.25 KW    

Condition: used, Year of construction: 2011, Manufacturer : Packo Inov NV Ihedpsx R A Apefx Ag Uet Type: Cryofreezer / Batch freezer Year of manufacture : 2011   Total volume : 950 L Dimensions : 150 x 120 x 230 cm Supply voltage 3x400V + N – 50Hz Minimum temperature set point: – 120°C Weight : 600 Kg Materials: 304 L stainless steel Full technical file: available in digital version Refrigerant : Liquid nitrogen   Previous use: 0.5 or 1L bottles containing Biological active ingredient. 0.5L bottle : o Dimensions: 72 x 72 x 180 mm (WxDxH) o Maximum capacity: 32 bottles 1.0L bottle : o Dimensions: 90 x 90 x 220 mm (WxDxH) o Maximum capacity: 32 bottles  

Year of construction: 2015, condition: used, Documents Technical information Physico-chemical separation / distillation unit. Year : 2015 Installation ATEX 3G IIBT4, inside the installation: zone 1G Operating mode: continuous – batch – semi-batch. Pressure: Vacuum – 3 barg max Boiler size: 50 Litres (Possible 200 Litres) Flow rates: Approximately 180 Kg/hr feeding a water/ethanol mixture (90/10) at atmospheric pressure with a reflux rate of 5. Nombre de plateaux théoriques : 20 - Alimentation possible en 3 points : 4 lits de garnissage structuré, 4 redistributeurs de liquide (dont 3 avec recentreurs) Dimensions: Unit made as a skid, in hot-dip galvanised steel frame with dimensions 2400 x2400 x 4000MM high. Iodpfx Ajx R Anfog Ujht Utilities / sources : Steam: 3 bar eff 143°C 30 to 80kg/h Cold water 25-30°C : 2-5m3/h Chilled water 5-10°C : 0.5m3/h Compressed air : 6bar eff Nitrogen inerting : 4.5 bar eff Electricity : 400V tri 50 Hz IT : 5kw

Condition: used, - Material: Stainless steel Ihjdpfx Ajx Rz Nbeg Uot - Pneumatic version / ADF - EX - 2 truncated 400L tanks on trolley (per dryer) model WSG120 / D.1200 / 900 X PF.500 - 1 tank turner common to both dryers - Control cabinet - Safety by 2 explosion membranes coupled to nitrogen gas cylinder

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Ionization Modes Electrospray Ionization (ESI): Uses a TurboIonSpray® probe. High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Atmospheric Pressure Chemical Ionization (APCI): Employs a different APCI probe. The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Ihedpfx Agjxhfc Rs Uet Robustness & Productivity The design supports multi-day stability, with studies showing

Condition: used, This listing is for a Grant Controlled Rate Freezer - CRF-1 The unit is in full working condition and is ready for immediate release Product Overview: The CRF-1 Liquid Nitrogen-Free Controlled Rate Freezer is designed for precision-controlled freezing and cryopreservation of biological samples, such as embryos, stem cells, mammalian cells, spermatozoa, antibodies, tissue sections, and rodent organs. Unlike conventional liquid nitrogen-based freezers, the CRF-1 is liquid nitrogen and cryogen-free, eliminating contamination risks and making it suitable for use in cleanrooms and barrier facilities. It offers superior performance in terms of cell viability post-freezing and poses no fire hazard, unlike alcohol-based systems. The CRF-1 allows for highly accurate, reproducible, and controlled freezing rates, crucial for the cryopreservation of biological samples, ensuring optimal recovery upon thawing. Key Features: Cryogen-Free Design: The CRF-1 is free from liquid nitrogen and alcohol, offering a safer, cleaner alternative to traditional freezing methods. No contamination risk, making it ideal for use in sterile environments. Precise Cooling Control: The cooling rate is accurately controlled, especially for the critical nucleation/seeding phase, which ensures consistent and optimal recovery of cells. Wide Temperature Range: Capable of cooling down to -100°C with straws, offering a broad application range for biological cryopreservation. Simple Operation: The CRF-1 operates with or without a PC, and it can log data via PC software. Cooling profiles are displayed directly and can be customized. High Versatility: Compatible with cryovials, straws, bags, microplates, and Matrix-96-well block plates, allowing for research across multiple areas like stem cell research, transgenic embryos, mammalian cells, and more. Low Operational Costs: The CRF-1 runs at approximately 1% of the cost of liquid nitrogen-based freezing systems. Safety Features: Includes an optional Un-interruptible Power Supply (UPS) for complete cycle continuation in case of power failure. Compact & Quiet: Fits neatly on a bench-top and operates quietly, making it suitable for laboratory settings. Ihedpfx Asxv Dz Iog Uet Main Applications: Transgenic embryos research Stem cell research Clinical and research samples like lymphocytes and tissue cell lines Mammalian cell preservation (e.g., cardiomyocytes, adipose, liver, muscle) Cord blood-derived stem cells Adherent cells and stem cells in microplates Cell suspensions in numbered/barcoded arrays Robotic integration for high-throughput applications Veterinarian IVF applications Technical Specifications: Dimensions (w x d x h): 264 x 367 x 445 mm Weight: 9.8 kg Max Plate Temperature: 30°C Min Plate Temperature: -80°C (standard) or -100°C (dependent on model) Temperature Accuracy: ±0.5°C Temperature Stability: ±0.1°C Temperature Uniformity: ±1.0°C Max Cooling Rate: 10°C/min Max Temperature Stabilization Time: 5 minutes Key Benefits: Accurate and Reproducible Cooling Rates: Ensures controlled freezing rates and precise sample temperature management. Customizable Cooling Profiles: Choose from linear and non-linear profiles, or create your own tailored profile. No Cryogen or Liquid Nitrogen: Ideal for reducing contamination risk and the cost of liquid nitrogen. Low Running Costs: Estimated to cost only 1% of traditional liquid nitrogen-controlled freezing methods. End-of-Cycle Cooling Stability: Maintains a steady -100°...

Condition: used, This listing is for the This listing is for the Bruker microflex mass spectrometer The unit is in full working condition and is ready for immediate use The Bruker Microflex is a Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometer (MALDI-TOF MS), primarily used for rapid identification of microorganisms, biomolecules (like proteins and peptides), and polymers. It is part of Bruker’s MALDI Biotyper series Key Components: Laser Source: Nitrogen or solid-state laser (commonly 337 nm UV) Ion Source: Vacuum chamber with MALDI target plate Flight Tube: Measures time-of-flight of ions Detector: Converts ion arrival times into a mass spectrum MALDI Target Plate: Metal plate for spotting samples mixed with matrix How It Works (Simplified): Sample Prep: Mix analyte with a MALDI matrix (e.g., α-cyano-4-hydroxycinnamic acid). Laser Ionization: Laser hits the matrix, causing it to ionize the sample. Ion Acceleration: Ions accelerated into TOF analyzer. Detection: Time-of-flight is measured; smaller ions reach the detector faster. Spectrum: Mass/charge ratio (m/z) plotted vs intensity. Physical Specs (Approximate): Footprint: Desktop size (about 80 cm width) Weight: ~100–120 kg (varies by model/version) Power: Standard lab electrical supply Ihjdpfexhdxqsx Ag Ujt Environment: Requires clean, stable temp/humidity condition

Condition: used, This listing is for a Thermo Scientific Orion AQUAfast Colorimeter. The unit is in full working condition and is ready for immediate release. The Thermo Scientific Orion AQUAfast Colorimeter is a robust and versatile multi-parameter instrument designed for efficient water and wastewater analysis. With over 90 pre-programmed methods, including tests for key nutrients such as total nitrogen and total phosphate, this colorimeter offers precise and reliable results for a wide range of testing needs. Ideal for both laboratory and field use, the AQUAfast colorimeter features automatic wavelength selection, a waterproof design, and user-friendly features to simplify and enhance the testing process. Key Features: Rugged Waterproof Design: With an IP67 rating, this colorimeter is built for durable performance in challenging environments, making it perfect for both field and laboratory applications. Extensive Preprogrammed Methods: Includes over 90 preprogrammed methods for common water and wastewater parameters, such as total nitrogen and total phosphate, ensuring easy and accurate testing for a variety of needs. Automatic Wavelength Selection: The colorimeter automatically selects from 6 LED wavelengths (430, 530, 560, 580, 610, and 660 nm) to match the optimal wavelength for each test parameter, improving efficiency and accuracy. Countdown Timer: The built-in countdown timer ensures precise and consistent timing for all tests, helping users achieve repeatable results with ease. Data Storage: Capable of storing up to 1000 test results with a date and time stamp for easy data management and review. Long Battery Life: Enjoy extended operation with up to 26 hours of continuous use or 3500 tests, making it ideal for long fieldwork sessions. Multilingual User Interface: The interface supports multiple languages, including English, French, German, Italian, Polish, Portuguese, and Spanish, making it accessible for a wide range of users. Compatible with Thermo Scientific Orion Reagents: Use with Thermo Scientific Orion reagents ensures high accuracy and consistency in test results. Specifications: Wavelengths: 6 LED wavelengths (430, 530, 560, 580, 610, and 660 nm) Preprogrammed Methods: Over 90 methods for common water/wastewater analysis Data Storage: 1000 readings with date/time stamp Battery Life: Up to 26 hours continuous use or 3500 tests User Interface: Multilingual (English, French, German, Italian, Polish, Portuguese, Spanish) Ihodpsxx Acpjfx Ag Ust Waterproof Rating: IP67 Countdown Timer: Yes, for precise test control Dimensions: Portable and lightweight for field use (exact dimensions available on request)

Operating hours: 9,999 h, condition: good (used), functionality: fully functional, Used continuous belt brazing furnace Manufacturer: WMU System Ihsdex Tb Rdjpfx Ag Ujt • System designation: y-WMU • Type of system: o Continuous belt furnace o Protective gas atmosphere H₂ / N₂ • System manufacturer: WMU GmbH Temperature data • Number of control zones: 4 • Max. temperature at part: 900 °C • Min. temperature at part: 880 °C Setpoint temperatures per zone: • Zone 1: 970 °C • Zone 2: 970 °C • Zone 3: 980 °C • Zone 4: 980 °C Process parameters • Belt speed: o 480 mm/min o corresponds to 530 mm/min at full belt load • Gas flow rates: o Nitrogen (N₂): 20 m³/h o Hydrogen (H₂): 14 m³/h

Condition: ready for operation (used), Year of construction: 2019, This 3-axis Bodor P3015 was manufactured in 2019 and is a robust fiber laser cutting machine. It features a 1.5 kW fiber laser, capable of cutting a variety of materials including carbon steel and aluminum, with a cutting area of 3000 mm x 1500 mm. It includes a Bodor CNC control system and an exchange table. If you are looking to get high-quality sheet metal cutting capabilities consider the Bodor P3015 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Ihodpsx Uzv Ajfx Ag Ujt • Number of axes: 3 / cutting area (x x y): 3000 mm x 1500 mm / positioning accuracy: ±0. 03 mm / repeat positioning accuracy: ±0. 02 mm / max cutting speed: up to 60 m/min / supported materials: carbon steel, stainless steel, aluminum, brass, copper • Control system: cnc control system / software: operating system, compatible with common cad/cam formats • Laser type: fiber laser / laser power: 1. 5 kw • Maximum z-axis travel: typically 100 mm (depending on model) • Table type: exchange table (depending on configuration) • Power supply: 400v / 50hz / total power consumption: approx. 2030 kw (depending on model and auxiliary systems) / cooling system: water cooling (chiller) / assist gas: oxygen, nitrogen, air • Weight (kg): approx. 60008000 kg

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the advanced safety and performance test package “P Plus”. This device is not a standard laboratory incubator but a high-quality safety test chamber, specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Key Added Value: The unit is designed to reliably detect, monitor, and contain critical battery events safely—including up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the device do specifically? (Section 2 – Performance & Application) – Conduct aging tests on lithium-ion cells – Performance tests (charge/discharge cycles under temperature) – Continuous temperature runs and thermal cycling tests – Testing of non-energized and cyclically energized cells – Reproducible, precise temperature control throughout the entire usable space – Safe execution of tests under realistic thermal conditions – Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: – Battery & cell manufacturers – Research and development laboratories – Test laboratories & safety testing – Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: – Automatic & manual CO₂ fire suppression system – Smoke detector with optical & acoustic alarm – Mechanical double door locking (secure containment) – Spark protection in the interior compartment – Exhaust connection with reversible overpressure flap – Connections for external inerting (e.g., nitrogen) – Emergency stop / manual release of extinguishing system – Ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur, but not explosion or uncontrolled propagation. This is not an abuse or destruction test device, but a secure, standard-compliant test chamber for real-world operating and fault scenarios. Technical Core Data: – Temperature range: –5 °C to +100 °C – Interior volume: approx. 698 liters – Shelves: 4 × stainless steel – Max. load per shelf: 45 kg – Max. total load: 100 kg Electrical Data: – Mains connection: 200–240 V AC – Frequency: 50/60 Hz – Phases: single-phase – Power consumption: approx. 2.1 kW – Circuit protection: 16 A – Refrigerant: R134a – Protection class: IP 20 Dimensions & Weight: – External (W × H × D): approx. 1250 × 1950 × 900 mm – Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why is this device special? – Genuine battery safety test chamber – Suitable for EUCAR Hazard Level 5 – Integrated CO₂ extinguishing system – Large chamber (≈700 l) – High market value & resale attractiveness – Weight: approx. 285–300 kg – Condition: used Iodpfsx Sc Inox Ag Usht – Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, we are happy to answer your call.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,800 h, table load: 7,500 kg, This VOORTMAN V320 was manufactured in 2019. It features a Kjellberg Smart Focus 300 plasma source and a Donaldson DFPR06 extraction system. Capable of handling mild steel with a panel length range of 850 – 6,100 mm and thickness from 6 – 75 mm. It includes options for punch marking and countersinking, enhancing versatility. Consider the opportunity to buy this VOORTMAN V320 plasma cutting machine. Contact us for more information about this machine. • Workpiece size • Min./max. panel length: 850 – 6,100 mm • Min./max. panel width: 200 – 2,050 mm • Min./max. panel thickness: 6 – 75 mm • Drilling unit: VD40 • Mounting: SK 40 • Axis speed: 0 – 2,500 rpm (continuously variable, servo motor) • Drill diameter: 5 – 40 mm • Threading: M6 – M30 • Countersinking: Yes • Punch marking option: Yes • Layout marking option (optional): Yes • Automatic tool changer: 2 x VTC 5/40 (2 x 5 positions) • Lubrication/cooling: Internal cooling, air/oil • Hydraulic mounting: Yes • Rated load: 30 kW • Feeding and positioning: Synchronously driven servo motors, servo converter Iedjx D N Aaspfx Ag Uoht • Cutting – Plasma (Smart Focus 300) • Min./max. thickness: 3 – 80 mm • Max. piercing capacity: 40 mm • Virtually slag-free cutting: up to 35 mm • Marking: Yes, with the same consumables • Gases: • Plasma gas for cutting mild steel: O2 (99.9% pure, clean, dry, oil-free) • Shielding gas for mild steel: O2 / Air (99.9% pure, clean, dry, oil-free) • Marking gas: Argon; for >200 A, nitrogen • Automatic gas console: Yes • Automatic height adjustment: Yes • Ignition: Automatic • Cutting speed (mild steel): • 6 mm: approx. 3,700 mm/min @ 90 A • 12 mm: approx. 3,600 mm/min @ 200 A • 25 mm: approx. 1,600 mm/min @ 300 A • 40 mm: approx. 720 mm/min @ 300 A • 50 mm: approx. 400 mm/min @ 300 A • 80 mm: approx. 100 mm/min @ 300 A • Cutting – Oxy-fuel (oxygen cutting unit) • Nozzle type: Nozzle-mix • Automatic height adjustment: Yes • Gas supply: Magnetic valve with non-return valve • Fuel gas: Propane (optional: Acetylene) • Cutting gas: O2 • Max. thickness: 75 mm • General/installation • Working direction: Left to right • Working height: 760 mm (+/- 25 mm) • Ambient temperature: -10°C to +35°C, max. 95% relative humidity • Voltage regulator: Not included • Current transformer: Not included Additional equipment • Kjellberg Smart Focus 300 plasma source (included) • Donaldson DFPR06 extraction system (included; last filter change January 2025)

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 4000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 22 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - MOMENTUM GEN - 2 fiber laser cutting machines 3,000 x 1,500 mm - Ytterbium YLS 4000 compact resonator (4 kW) - PRECITEC PROCUTTER laser cutting head - CAD / CAM software BECKHOFF - Controller CP 6242 - 17 "touchscreen, keyboard, control panel, alphanumeric keyboard - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel ... 20 mm - stainless steel ... 12 mm - aluminum ... 10 mm - brass ... 6.0 mm - Copper ... 5.0 mm Workspace: - max .: 3,000 x 1,500 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) included : - Compatible suction system - Light barrier safety device - Spare part basic supply package Why Fibermak / Fiberlaser? - Up to 3 times faster cutting compared to other laser technologies Iodpfegvq A Ejx Ag Usht - Machines for cutting thin sheets - Axis speed: reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology - Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical components - therefore, among other things, very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting reflective materials * like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Condition: new, Year of construction: 2025, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min weight 4980 kg dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 12 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling Iedpfx Aexv D T Rsg Uoht 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 25 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor