Used Moulding Machine for sale (83,641)

Condition: used, Year of construction: 2007, operating hours: 81,963 h, VC 500/110 technical data Year: 2007 Clamping force: 1100 kN Injection unit: 500 Control unit: EC200 A01 Screw diameter: D45 Operating hours: 81,963 8-zone mould heating control 4x digital input, 4x digital output 2x single-phase socket Tjdpfxsxvz Rgs Ag Djf 1x three-phase socket 1x air blowing valve INTEGRATED robot + conveyor belt ER-HLI 41 X - pneumatic: Travel: 20 - 150 mm Adjustment range: 0 - 300 mm Y - pneumatic: Max. travel: 250 mm Adjustment range: 0 - 100 mm Z – servo: Drive: Servo motor Power transmission: Toothed belt Max. speed: 2.0 m/s Max. travel: 1025 mm C-axis (3.5 Nm): Drive: pneumatic cylinder Max. travel: 0 - 90 degrees 1 switchable vacuum/compressed air circuit

Condition: used, Year of construction: 2017, operating hours: 17,481 h, functionality: fully functional, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 393 cm³, injection pressure: 1,892 bar, injection weight: 375 g, mold height (min.): 300 mm, ejector force: 33 N, ejector stroke: 150 mm, total length: 5,000 mm, total width: 1,600 mm, total height: 2,000 mm, overall weight: 8,200 kg, heating capacity: 15.5 kW (21.07 HP), pump power: 2,200 W, type of input current: three-phase, Equipment: documentation/manual, The machine has been regularly maintained, test possible. Tjdpfx Agexvqnno Djf

Year of construction: 2015, condition: ready for operation (used), Six heel counter molding machines for the shoe production are available. 1) BSRM-MCF 30, year of manufacture: 2003, stations: 2, cycle time: approx. 15s, machine dimensions X/Y/Z: approx. 1000mm/800mm/1550mm, weight: approx. 300kg. 2) Guth M-BU-AEZ-KE, year of manufacture: 1999, stations: 2, machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 450kg. 3) International/Mollina & Bianci 3200/C OPT20, year of manufacture: 2003, temperature range: 50°C–200°C, machine dimensions X/Y/Z: approx. 1200mm/850mm/1600mm, weight: approx. 350kg. 4) 2x Sabal 3200/C, year of manufacture: 2006/2014, stations: 2, heating power: 350W, machine dimensions X/Y/Z: approx. 1100mm/800mm/1550mm, weight: approx. 400kg. 5) Ring-Leibrock FFS 34 LT-2, year of manufacture: 2015, heating zones: 4, machine dimensions X/Y/Z: approx. 1350mm/950mm/1750mm, weight: approx. 500kg. An on-site inspection is possible. Tedpfx Aexnp Rlog Def

Condition: excellent (used), Year of construction: 2003, operating hours: 20,092 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz Todpfxsgrzh Es Ag Dsf 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: excellent (used), The machine is from the year 2007 and has only operated for 5,000 hours. It was primarily used to test casting molds, which explains the low number of operating hours. The machine can be inspected and tested under power in Germany - 64850 Schaafheim. For further information, please contact us. Tedexldtiepfx Ag Dsf In addition to the machine, plastic granulate as well as other accessories and spare parts (see pictures) are available for purchase. ENGEL Victory 1050/220 Power, year of manufacture 2007. Location: The machine is located in 64850 Schaafheim (Germany), fully assembled. Condition: The machine can be connected to power for demonstration. Overall dimensions: Length: approx. 6,950 mm Width: approx. 1,800 mm Height: approx. 2,250 mm Weight: approx. 12,900 kg Platen and mold data: Clamping plates: approx. 820 × 820 mm Tie bar spacing: approx. 570 × 570 mm Minimum mold thickness: 250 mm Maximum mold thickness: 700 mm Daylight: 950 mm Centering hole: Ø 125 mm You are welcome to arrange a viewing and test of the machine at our premises in Schaafheim by appointment. Kind regards,

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 70 mm, For sale is an Engel injection moulding machine, type ERC 43/1-EA, including robotic handling. The machine is in good condition and ready for immediate operation. The machine is currently in operation and can be inspected on site. Professional dismantling and loading included. Technical data: Year of manufacture: 2000 Operating hours: 69,000 - Clamping unit: Clamping force: 3,000 kN Platen size: stationary 1,050x980 mm, moving 1,050x900 mm Min. mould installation height: 350 mm Max. platen distance: 1,200 mm 2 core pulls 2 air valves Centre ring diameter: 160 mm - Injection unit: Screw diameter: 70 mm Max. shot volume: 1,155 cm³ Specific injection pressure: 1,779 bar Temperature release up to 500°C - Handling: X: 500 mm Y: 800 mm Tedpfxexc D Dco Ag Dsf Z: 1,880 mm C-axis: 0-90° pneumatic 2 suction/gripper circuits Freely programmable I/Os Conveyor belt 4,000 x 600 mm, height-adjustable Predefined program sequences, sprue separation, quality part placement Transport and loading can be organised Europe-wide at extra cost upon request. Prices are exclusive of VAT. Inspection is possible by appointment. Contact us—our team will be happy to assist you. Part exchange or trade-in possible! Machinery Purchase/Sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For further information or to contact us, please visit our website.

Condition: excellent (used), Year of construction: 2004, ENGEL VC 200-45 Year: 2004 Clamping force: 450 kN Injection unit: 200 Control unit: CC200 A01 Screw D35 Operating hours: 88,963 4x digital input, 4x digital output 2x single-phase socket 1x three-phase socket Tsdpsxuqwgsfx Ag Dsf 1x air blowing valve

Year of construction: 2011, condition: ready for operation (used), General Data Measurements width 1.42 m Measurements depth 4.36 m Measurements height 1.95 m Machine weight 4700 kg This Milacron ELEKTRON 75 was manufactured in 2011. It features a screw diameter of 18 to 32 mm and a clamp force of 750 kN. The machine dimensions are 4.36 × 1.42 × 1.95 m, and it weighs 4700 kg. If you are looking to get high-quality injection moulding capabilities, consider the Milacron ELEKTRON 75 machine we have for sale. Contact us for more information about this machine. Todpfx Agsxpyp Uj Djf Application Types Injection Moulding

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Todpfotyyn Hex Ag Dof

Condition: ready for operation (used), Year of construction: 2020, operating hours: 30,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 100 mm, displacement volume: 3,534 cm³, Clamping force 9000 kN Distance between tie bars (h x v) 1180 x 1000 mm Mould opening stroke 1600 mm Mould height min 500 / 1100 mm Max. daylight 2100 mm Screw diameter 100 mm Ls/D ratio 20 Tsdpfx Asxcakrsg Dsf Stroke volume 3534 ccm Shot weight (PS) 3216 gr. Accessories: - Anti vibration pads - Hilectro Robot V1500 - Conveyor Additional Options: - 1 x Air valve - 4 x Core pulls

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 202102, overall weight: 2,400 kg, type of input current: three-phase, total height: 1,790 mm, pressure: 6 bar, pressing force: 70 t, This Comec SPM/15 moulding machine is in excellent, like-new condition, with very low operating hours. It’s been used for precision moulding of soles for Footwear. Operation: Pneumatic, Oleodynamic Tsdpjxu Dyzsfx Ag Djf Ideal for: Footwear soles, technical moulded parts, or similar applications Machine has been regularly maintained, kept in a clean production environment, and shows no signs of wear or damage. Perfect choice for manufacturers looking for top performance at a lower investment cost compared to a new unit.

Condition: good (used), 4-Side Planer BONFANTI MB 4023x4 Serial No. 04-226 CE Standards Machine tables are chromed Max./Min. working width 230/20mm Max./Min. working height 160/8mm Table length 2000mm Motor power 1 10HP Motor power 2 10HP Motor power 3 10HP Motor power 4 15HP Feed drive power 4HP Height adjustment motor 2.5HP Spindle diameter 40mm Feed speed 6-24m/min Spindle speed 6000 RPM Machine dimensions 3720x1750x1700mm Todpfx Ajw S Ecajg Def

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Tedpfx Aoukn S Hsg Dsf Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Year of construction: 2016, condition: ready for operation (used), This MAPLAN MFT 750/160 edition S was manufactured in 2016. It is a vertical injection moulding machine, ideal for precision plastic processing. Contact us for more information. Application Types Injection Moulding Tsdpow Tficofx Ag Dsf

Year of construction: 1995, condition: ready for operation (used), Clamping force: 500kN, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, max. platen opening: 550mm, clamping platen dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 3700mm/1400mm/1900mm, weight: approx. 1750kg. An on-site inspection is possible. Tsdpfx Aexltvmsg Dsf

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ Tedpjtpf N Uefx Ag Djf - Clamping force: 55T - Working hours: 24,210

Condition: used, Gubish 6-Axis Moulding Machine Tjdpfx Agsxp Ntio Dof

Condition: good (used), Manufacturer: Arburg Year of manufacture: 1999 Todpfx Agsxf Dxrs Def Operating hours: h Machine number: 178930 Type / Model: 270C-300-100 Clamping force: 30 t Min. mold installation height: 225 mm Max. opening stroke: 325 mm Max. platen distance: 500 mm Clear tie-bar distance: 270 x 270 mm Platen size: 400 x 400 mm Screw diameter: mm Max. dosing volume: 90 cm³ Shot weight PS: 80 g Holding force: 31 kN Connection: 25 kW Accessories/equipment: 1 core puller Condition: good Weight: 1.8 t Dimensions: 3,700 x 1,700 x 1,800 mm

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Tsdpfx Agsv Stbmo Def Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Year of construction: 2002, condition: ready for operation (used), Injection Unit Tedpfx Asxn Uyrsg Djf Screw diameter 120 mm Injection pressure 1172 bar This Husky GL 300PET P100/110 E12O was manufactured in 2002. It features a distance between tie bars of 720 × 720 mm, a maximum mold stroke of 700 mm, and a screw diameter of 120 mm. The machine offers a screw L/D ratio of 25.0:1 and an injection pressure of 1172 bar. If you are looking to get high quality molding capabilities consider the Husky GL 300PET P100/110 E12O machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Tedpsu Awalefx Ag Dsf Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Model CC300 microcomputer Brand ENGEL Injection Unit Screw diameter 45mm Clamping Unit Clamping force 500 tons Additional Equipment Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Application Types Tedew Rg Tqepfx Ag Djf Injection Moulding

Condition: ready for operation (used), Year of construction: 2006, operating hours: 77,000 h, functionality: fully functional, clamping force: 5,000 kN, screw diameter: 100 mm, Clamping force 5000 kN Mould opening force, max. 280 kN Travel force movable platen opening 137 kN Travel force movable platen closing 136 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 900 x 800 mm Mould opening stroke 1170 mm Mould height min 480 mm Max. daylight 1650 mm Hydraulic ejector - stroke 250 mm Ejector force 95/48 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1411 bar Stroke volume 2411 ccm Shot weight (PS) 2194 gr. Tedjwgni Hopfx Ag Dof Injection rate 801 ccm/s Screw speed 189 1/min Plasticising rate max. 161 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,50 x 2,50 m Total machine weight 27090 kg Max. mould weight 7900 kg Accessories: - Anti vibration pads - 2 x 8 fold water flow regulator Additional Options: - 2 x hydr. core pull on movable plate - 2 x hydr. core pull on fix plate - Robot interface according to Euromap 12 - 16 x hotrunner controller - 1 x air valve on movable plate

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Tedpfxjxmbwbj Ag Dsf Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 1850 Measurements depth 5800 mm Measurements height 2200 mm Todpfjxl H E Ujx Ag Def Machine weight 9400 kg Injection Unit Screw diameter 45 / 48 / 50 mm Shot weight 229 / 289 / 357 g Stroke volume 286 / 318 / 393 cm³ Injection pressure 2494 / 1970 / 1878 bar Screw speed 270 rpm Clamping Unit Clamping force 1800 kN Opening stroke 540 mm Max open daylight 1230 mm Mould height min 300 mm Mould height max 790 mm Ejector stroke 200 mm Ejector force for / back 49 kN This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding