Used Moulding Machine for sale (64,764)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,500 kN, screw diameter: 105 mm, clearance between the columns: 1,400 mm, displacement volume: 4,546 cm³, injection pressure: 1,778 bar, injection weight: 4,137 g, Clamping force 950 kN Mould opening force, max. 665 kN Travel force movable platen opening 112 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1960 x 1710 mm Distance between tie bars (h x v) 1400 x 1150 mm Mould opening stroke 1800 mm Mould height min/max 600/1200 mm Max. daylight 2400 mm Injection unit: Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 126 1/min Plasticising rate max. 147 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 59 kW Adjustable barrel heating zones 7 Ncedpfx Aajx Hz I Njasr Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 12,00 x 3,50 x 3,00 m Total machine weight 67000 kg Max. mould weight 20300 kg

Condition: ready for operation (used), A large-format two-component injection molding machine Engel is available. Screw diameter: 120mm, metering stroke: 480mm, max. shot volume: 5430cm³, screw speed: 130rpm, L/D ratio: 20, plasticizing capacity: 132g/s, injection pressure: 1600bar, nozzle stroke: 950mm, nozzle force: 150kN, heating capacity: 80kW, pump capacity: 110kW, oil filling: 1600l, injection unit weight: 17t. Clamping force: 17000kN, opening force: 1230kN, opening stroke: 2550mm, mold installation height min./max.: 800mm/1600mm, max. platen distance: 3350mm, platen dimensions X/Y: 2640mm/2250mm, tie bar spacing X/Y: 1805mm/1405mm, tie bar diameter: 285mm, ejector stroke: 300mm, ejector force: 230kN, clamping unit weight: approx. 82t. Overall system dimensions X/Y: approx. 11500mm/7300mm, total system weight: approx. 100t. Documentation available. An on-site inspection is possible. Ncodpfx Asymfdgjaaor

Condition: ready for operation (used), Year of construction: 2006, operating hours: 58,670 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, displacement volume: 318 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22,4 Injection pressure 2336 bar Stroke volume 318 ccm Shot weight (PS) 289 gr. Injection rate 143 ccm/s Nsdpfoydp Idex Aaaocr Screw speed 265 1/min Plasticising rate max. 29,3 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,00 x 2,00 x 2,20 m Total machine weight 6600 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 - 90 ° Additional Options: - 1 x Air valve - 2 x hydr. core pulls - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2006, operating hours: 68,590 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 50 mm Ls/D ratio 20 Injection pressure 1892 bar Stroke volume 393 ccm Shot weight (PS) 358 gr. Injection rate 177 ccm/s Screw speed 265 1/min Plasticising rate max. 36,2 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,00 x 2,20 m Total machine weight 6600 kg Max. mould weight 1862 kg Ncedpfx Aoydp D Eoaajr Accessories: - Anti vibration pads - Krauss Maffei Robot LR100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0 - 90° Additional Options: - 1 x Air valve - 2 x core pull - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2004, operating hours: 65,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,047 cm³, Clamping force 3500 kN Mould opening force, max. 220 kN Travel force movable platen opening 105 kN Travel force movable platen closing 95 kN Size of mould platens (h x v) 1100 x 1095 mm Distance between tie bars (h x v) 710 x 710 mm Mould opening stroke 920 mm Mould height min 380 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 70 mm Ls/D ratio 20 Injection pressure 1778 bar Stroke volume 1047 ccm Shot weight (PS) 953 gr. Injection rate 527 ccm/s Screw speed 285 1/min Plasticising rate max. 95 g/s Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 30 kW Adjustable barrel heating zones 6 Reservoir capacity 720 ltr. Ncodpfx Aeydmkcjaaor Dimensions and weights: Dimensions of the machine ca. 6,50 x 2,20 x 2,40 m Total machine weight 15370 kg Max. mould weight 4780 kg Accessories: - Anti vibration pads Additional Options: - 1 x core pull - 1 x air valve - Robot interface according to Euromap 12

Condition: ready for operation (used), Year of construction: 2007, General Data Ncedpex D Rwrsfx Aaaer Measurements width 1850 Measurements depth 5800 mm Measurements height 2200 mm Machine weight 9400 kg Injection Unit Screw diameter 45 / 48 / 50 mm Shot weight 229 / 289 / 357 g Stroke volume 286 / 318 / 393 cm³ Injection pressure 2494 / 1970 / 1878 bar Screw speed 270 rpm Clamping Unit Clamping force 1800 kN Opening stroke 540 mm Max open daylight 1230 mm Mould height min 300 mm Mould height max 790 mm Ejector stroke 200 mm Ejector force for / back 49 kN This FERROMATIK ELEKTRA 180 was manufactured in 2007. It features a screw diameter of 45-50 mm, injection pressures up to 2494 bar, and a clamping force of 1800 kN. The machine dimensions are 5.8 × 1.85 × 2.2 m, and it has a total connected load of 33.8 kW. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK ELEKTRA 180 machine we have for sale. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding Nsdsx D Rq Espfx Aaajcr

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, This Dr Boy injection moulding machine is in machine storage at Plastima Used Machinery. The machine is from 2007 and has relatively few working hours for its age. Ncjdstpf N Ujpfx Aaajr - Brand: Dr Boy - Model: 55M - Year of construction: 2007 - Screw diameter: 32mm - Shot volume: 96.5 cm³ - Clamping force: 55T - Working hours: 24,210

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Hersteller: FERROMATIK MILACRON Type: K-200 S Year of construction: 2001 Nedpfjw Hc Spjx Aaajcr Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 416 cm³ Shot weight: 375 g Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg

Year of construction: 2007, condition: ready for operation (used), Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80t, screw diameter: 25mm, year of manufacture: 2001. 10) 2 KM SilcoStar 922A, year of manufacture: 2007. On-site inspection is possible. Individual sale possible. Some machines are partially dismantled and/or defective. Nsdpfowkiicox Aaaocr

Year of construction: 2022, condition: ready for operation (used), A new injection molding machine including robot is available. 1) Krauss Maffei injection molding machine, year of manufacture: 2022, clamping system: hydromechanical clamping system with 2 platens. Plasticizing: 8100, screw diameter: 105mm, nozzle radius: 35mm, nozzle bore: 6mm, clamping force: 1700t, control: MC6. 2) Industrial robot Kuka IR 1200 R3100.2 F/K, max. payload: 120kg, reach: 3100mm, repeatability: +/-0.05mm, control: KR C5. Documentation available. On-site inspection is possible. Nsdovpvlcepfx Aaascr

Year of construction: 2002, condition: ready for operation (used), A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026. Nodpfewut Hyjx Aaaecr

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Ncedpfx Aasuiykdeaor

Year of construction: 2012, condition: ready for operation (used), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible. Njdst E Tq Rjpfx Aaascr

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Nedow Rqwtspfx Aaaecr

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Nsdeyddy Ujpfx Aaajcr

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Nodjv Extzopfx Aaaocr

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Njdpfotyaypex Aaaocr

Year of construction: 2018, condition: ready for operation (used), A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible. Ncodpfox E Ac Eox Aaajr

Condition: ready for operation (used), Year of construction: 1993, Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mold installation height min./max.: 225mm/not specified, opening stroke: 325mm, tie bar spacing: 270mm/270mm, screw diameter: 20mm, core pulls: 1. 5) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850kN, shot weight: 108g, mold installation height min./max.: 250mm/625mm, opening stroke: 375mm, tie bar spacing: 320mm/320mm, screw diameter: 35mm, core pulls: 0. On-site inspection is possible. Individual sale possible. Ncsdpfx Ajx Hz Sbsaaor

Year of construction: 2003, condition: ready for operation (used), Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible. Ncjdpfjygw Siox Aaajr

Condition: ready for operation (used), Clamping force: 350kN, tie bar distance: 280mm/280mm, platen dimensions X/Y: 410mm/410mm, min. mold installation height: 180mm, max. opening stroke: 350mm, max. platen distance: 530mm, screw diameter: 22mm, shot volume: 47.5cm³, shot weight (PS): 41g, injection pressure: 2440bar, control: NC4, heating power: 6.3kW. Machine dimensions X/Y/Z: approx. 3100mm/1100mm/1600mm, weight: approx. 1800kg. On-site inspection is possible. Nodpfxswaa H Ds Aaascr

Year of construction: 2005, condition: ready for operation (used), Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible. Ncjdpfjuabq Tex Aaajr

Condition: ready for operation (used), Year of construction: 2008, A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible. Nedpfx Aajt Eu Azsajcr

Year of construction: 2013, condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible. Nsdst E Trbspfx Aaaecr