Used Moulding Machine for sale (83,878)

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Iodpfeu Awalsx Ag Dea Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: ready for operation (used), Year of construction: 2024, General Data Isdpfx Ajwvwbwsg Dsa Measurements width 1095 mm Measurements depth 3033-3448 mm Measurements height 2010 mm Machine weight 3030 kg Clamping Unit Clamping force 500 kN Opening stroke 400 mm Distance between bars 360 x 335 mm Mould height min 250 mm Ejector stroke 80 mm Ejector force for / back 20.4 kN / 13 kN Media Oil tank 200 liters Additional Equipment Screw diameter 32mm (SP 82)/ Clear width between tie bars 360mmx335 (hxv) /Maximum ejector stroke 80 mm/ Maximum injection weight PS 69.5/ Minimum mould height 250 mm /Maximum special injection pressure 1076 This BOY 50 E hydraulic injection moulding machine was manufactured in 2024. It features a maximum clamping force of 500 kN, a maximum opening stroke of 400 mm, and a total installed power of 16.8 kW. The machine dimensions are compact, with a length of up to 3448 mm and a width of 1095 mm. Consider the opportunity to buy this BOY 50 E hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Iodpfx Askucxljg Dja Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Condition: good (used), I sell the sharpening machine for moulding heads TOS Svitavy. Angular setting. Ijdpfxsq H Hzaj Ag Doa Very good condition. Avialable immediately.

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. Iedpfjg Ailcjx Ag Dja MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 61029386, clamping force: 2,000 kN, screw diameter: 70 mm, Equipment: documentation/manual, KraussMaffei 200/1400 CX POL BMC injection molding machine for sale in very good condition. Few operating hours, manufactured in 2017, commissioned in 2018. MC6 control. For details, please contact us by email! Ijdpfx Agowz Iv Ae Dsa Thank you!

Condition: excellent (used), Year of construction: 2019, Comes with spare brand new , boxed control panel. Versatile use, for example for precision portion production of rye doughs, wheat doughs, firm shortcrust pastry, cake mimixes and pound cake batter The integrated flour filter prevents flour dust from getting inside the machine High flexibility The combination with VEMAG attachments for individual portioning offers a high degree of flexibility. A dough portioner can be used to produce several different products (bread, bread rolls, cookies, English muffins, etc.). Hopper properties Round hopper fitted with a scraper. This ensures that no old dough remains in the hopper. Hygienic design Hygienic design thanks to simple cleaning using low-pressure equipment. Isdpfx Agjt Saf Ie Dja Comes complete with a box of spares. Very low workin hours.

Year of construction: 2004, condition: ready for operation (used), General Data Ijdpjw Nb Rnefx Ag Dea Machine weight 10500 Control Unit Brand ENGEL Model n/a This Engel Elast 1500/250V was manufactured in 2004. It's a vertical injection moulding machine designed for precision and efficiency in plastic processing. Consider the opportunity to buy this Engel Elast 1500/250V vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 40 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, ejector stroke: 150 mm, opening stroke: 600 mm, total length: 4,480 mm, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,000 kg, power: 18.5 kW (25.15 HP), Equipment: documentation/manual, In perfect shape. Iodpfx Agswlhb Ts Dsa

Year of construction: 1987, condition: ready for operation (used), Clamping force: 220kN, min. mould height: 200mm, max. opening stroke: 200mm, max. platen distance: 400mm, ejector stroke: 80mm, machine dimensions X/Y/Z: approx. 2600mm/800mm/1600mm, weight: approx. 760kg. An on-site inspection is possible. Iedpfx Agsw R Dg Uj Dja

Year of construction: 2016, operating hours: 5,650 h, condition: ready for operation (used), General Data Measurements width 3400 mm Measurements depth 2800 mm Measurements height 3900 mm Machine weight 8200 kg Automatic cycles 87601 Main Drive Distance between bars 570 x 520 mm Injection Unit Screw diameter 40-50 mm Nozzle pressure 30 kN Clamping Unit Max open daylight 975 mm Ejector stroke 200 mm Ejector force for / back 41.2 kN Ijdpfx Aew H Txlog Dsa Additional Equipment Foaming Unit – Battenfeld “Einschäumungseinheit” for physical foaming (MuCell-like) Handling System – Equipped with robot interface; compatible with Wittmann W818/W828 Conveyor Belt – 1400 mm × 400 mm Rotary Table – Integrated, servo-driven, for 2K molding with vertical injection unit Control Panel – UNILOG B6 touchscreen with periphery and MES interface capability Temperature Unit – 1× GWK Logotherm mold temperature controller This WITTMANN Battenfeld HM 180/750H/350V was manufactured in 2016. It features a clamping force of 180 tons and a screw diameter range of 40-50 mm. Notable for its multi-component capability, it integrates horizontal and vertical injection units with a rotary table for 2K molding. The UNILOG B6 control system offers an intuitive touchscreen interface. Consider the opportunity to buy this WITTMANN Battenfeld HM 180/750H/350V hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Iedpfeuiykdox Ag Dja

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 28400 kg Additional Equipment Iodpfjxb E I Tox Ag Doa The robot + auto line are not included. These PIOVAN accessories are included: Piovan Hot Air Dryer G35 / Piovan Suction Unit PF30 / 3x Piovan Temp Unit THW118-F (+1x brand new unused temperature unit) This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 1998, condition: ready for operation (used), Five identical Arburg injection molding machines are available. Clamping force: 800kN, column distance: 420mm/420mm, installation height: 250mm, platen distance: 700mm, nozzle diameter: 45mm, weight: approx. 3800kg, control: Selogica 3.020. All machines include temperature control unit and conveyor belt. Documentation available. The machines are in storage. On-site inspection is possible. Iedpfx Asviv Dfeg Dsa

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, General Data Measurements width 1264 mm Measurements depth 4308 mm Measurements height 1779 mm Machine weight 4200 kg Injection Unit Screw diameter 25 mm Shot weight 46 g Heating capacity 5.7 kW Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max 410 mm Ejector stroke 90 mm Ejector force for / back 25 kN Additional Equipment Granule Dryer Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm General Data Measurements width 1264 mm Measurements depth 4308 mm Measurements height 1779 mm Machine weight 4200 kg Injection Unit Screw diameter 25 mm Shot weight 46 g Heating capacity 5.7 kW Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Iodpfxew Efy To Ag Dja Mould height max 410 mm Ejector stroke 90 mm Ejector force for / back 25 kN Additional Equipment Granule Dryer Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2022, condition: ready for operation (used), A new injection molding machine including robot is available. 1) Krauss Maffei injection molding machine, year of manufacture: 2022, clamping system: hydromechanical clamping system with 2 platens. Plasticizing: 8100, screw diameter: 105mm, nozzle radius: 35mm, nozzle bore: 6mm, clamping force: 1700t, control: MC6. 2) Industrial robot Kuka IR 1200 R3100.2 F/K, max. payload: 120kg, reach: 3100mm, repeatability: +/-0.05mm, control: KR C5. Documentation available. On-site inspection is possible. Iodevpvlcepfx Ag Dsa

Condition: ready for operation (used), Year of construction: 2014, operating hours: 8,000 h, Injection Unit Screw diameter 25, 30, 30, 35, 40 mm Shot weight 54, 81, 102, 139, 181 g Stroke volume 20 cm³ Injection pressure 2800, 2400, 2800, 2180, 1670 bar Clamping Unit Clamping force 1000 kN Opening stroke 380 mm Ejector stroke 110 mm Ejector force for / back 35 kN This SUMITOMO SHI DEMAG IntElect 100/470-180 was manufactured in 2014. It features a fully electric, direct-drive main axes for high precision and energy efficiency, with energy savings up to 80% compared to hydraulic machines. Suitable for clean-room environments, it operates quietly with high injection dynamics. Clamping force is 1,000 kN with a maximum mold opening stroke of 380 mm. Consider the opportunity to buy this SUMITOMO SHI DEMAG IntElect 100/470-180 electrical injection moulding machine. Contact us for more information. Iodpfjw Efzkjx Ag Dea Application Types Injection Moulding

Year of construction: 2012, condition: ready for operation (used), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible. Iodot E Tq Rjpfx Ag Dea

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,777 h, General Data Iedow Efzwopfx Ag Dja Machine weight 6700 kg Clamping Unit Clamping force 80 t This Engel Victory 330H 80V/80 Combi was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of approximately 80 tons and has been operated for about 5,900 hours. Weighing 6.7 tons, consider the opportunity to buy this Engel Victory 330H 80V/80 Combi hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2007, condition: ready for operation (used), Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80t, screw diameter: 25mm, year of manufacture: 2001. 10) 2 KM SilcoStar 922A, year of manufacture: 2007. On-site inspection is possible. Individual sale possible. Some machines are partially dismantled and/or defective. Iodpjwkiicjfx Ag Dea

Year of construction: 2002, condition: ready for operation (used), A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026. Iedpfx Agewut Hyj Dea

Year of construction: 2002, condition: ready for operation (used), Clamping force: 1000kN, screw diameter: 30mm, platen dimensions X/Y: 570mm/570mm, opening stroke: 500mm, min./max. mold height: 250mm/750mm, injection weight: 121g/hp, injection volume: 106cm³, operating hours: 75320h. Iodpfotynkvsx Ag Dsa

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Ijdpfx Agsv Extzj Dea

Year of construction: 1991, condition: ready for operation (used), Clamping force: 12,000kN, opening force: opening stroke: closing speed: 1030mm/s, max. mold weight: 22.5t, max. platen dimensions: 1900x1950mm, tie bar diameter: 220mm, ejection force: 130kN, screw diameter: 133mm, injection pressure: 1445bar, width: 3500mm, length: 14,745mm, height: 2740mm. With documentation. On-site inspection is possible. Ijdjwbpzaepfx Ag Dsa

Year of construction: 2005, condition: ready for operation (used), Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible. Iodpeuabq Tjfx Ag Dja