Used Casting Machine for sale (65,050)

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Godsz En Afopfx Aivjkc Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Condition: used, Year of construction: 2006, number of axes: 3, working width: 2,040 mm, working length: 3,680 mm, TECHNICAL DETAILS MACHINING PROCESS Machining process: Drilling and milling WORKING AREA X-axis working area: 3,680 mm Y-axis working area: 2,040 mm Number of working areas: 2 Number of controlled axes: 3 WORKTABLE Table type: Flat table / Nesting table Number of tables: 1 Table width: 3,680 mm Table length: 2,040 mm Table material: Aluminum DRILLING UNIT Gsdpfx Aez Enz Ueivskc Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-axis: 2 Horizontal drilling spindles, Y-axis: 2 Total number of drilling spindles: 11 MILLING SPINDLE Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 13 kW Speed: 24,000 rpm Automatic tool changer: yes TOOL MAGAZINE Number of tool magazines: 1 Tool slots: 12 Tool magazine: positioned at the head VACUUM SYSTEM Number of vacuum pumps: 1 Suction capacity: 250 m³/h CONTROL AND SOFTWARE Control: PC-based control Programming software: Xylog Plus MACHINE DETAILS MAIN DRIVE Power of main electric spindle: 13 kW SAFETY CE marking: yes Protective guard: permanently mounted on the machine Safety system: front safety mats EQUIPMENT Aluminum nesting table Suction cups for workpiece clamping Vacuum pump Drilling unit with 11 drilling spindles Milling spindle with automatic tool changer Tool magazine with 12 tool slots PC-based control Programming software Xylog Plus Protective guard permanently mounted on the machine Front safety mats

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Description for posting on Machineseeker: Gkedpfxsz Ey Hpj Aivjc Hydraulic die casting machine TECNOFOND MR 1600 R – fully functional, Siemens control system. For sale: hydraulic die casting machine TECNOFOND MR 1600 R, manufactured in 1999, made in Italy. The machine is in perfect working order, operates correctly, and is ready for continued production. The die casting machine was used in our foundry for the production of aluminum castings. The machine has been modernized – the control system has been replaced with a Siemens system. In addition, the set includes reducing plates, which allow the machine to be adapted to different die and mold dimensions. Technical data: - Manufacturer: TECNOFOND S.n.c. – Italy - Model: MR 1600 R - Year of manufacture: 1999 - Type: hydraulic die casting machine - Maximum working pressure: 60 bar - Control system: Siemens – after modernization - Additional equipment: reducing plates - Application: production of aluminum castings The machine is in good technical condition, is fully functional, and can be inspected during operation before purchase. The sale is related to the modernization of the machine park and the reorganization of production.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, Gjdpfx Ajz R Rbdjivokc spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: used, Year of construction: 2015, functionality: fully functional, total height: 3,840 mm, total width: 4,200 mm, total length: 10,840 mm, overall weight: 73,500 kg, Oskar Frech GmbH & Co. KG Cold chamber die casting machine DAK 1600-133 and additional equipment The system is used for the production of die castings made of aluminum, magnesium, or copper alloys, which are manufactured using the cold chamber die casting process. Clamping force 16,000 kN Clamping stroke 1,200 mm Casting volume 3,014 – 12,057 cm³ Total weight of the system 73,500 kg Dimensions of the system Length 10,840 mm Width 4,200 mm Height 3,840 mm The system is equipped with the following additional units: Metering furnace, manufacturer Westomat, type 1700 S, capacity 1,700 kg Mold release spray system, manufacturer Gerlieva, type GS 1600/1800 T Metering furnace, manufacturer Meltec AVDF 1800/10 K, consisting of an aluminum melting furnace and a vacuum metering unit. The entire system is designed to allow fully automated operation for die casting of workpieces when used in conjunction with automation components. All necessary interfaces for communication and monitoring are available. Oskar Frech GmbH & Co. KG is one of the leading manufacturers of die casting machines worldwide. The DAK 1600-133 is the largest machine in the smallest series currently manufactured by Frech. Gjdpez Eblaofx Aivskc Automation of the die casting system, manufacturer Frech, type DAK 1600-133, using an automation cell, manufacturer Reis. These units are primarily used for removing the workpieces produced by the DAK 1600-133 die casting machine.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, total height: 4,700 mm, ram adjustment: 100 mm, installation height: 550 mm, table height: 1,200 mm, total width: 1,700 mm, total length: 2,700 mm, table length: 2,100 mm, table width: 1,000 mm, pressing force: 200 t, control cabinet height: 2,245 mm, control cabinet width: 2,400 mm, input voltage: 400 V, distance between side stands: 520 mm, distance between stands: 2,100 mm, overall weight: 48,000 kg, year of last overhaul: 2025, input frequency: 50 Hz, ZEULENRODA Punching and Forming Machine - Cast Iron Version - HR 200-2000 NL The punching machine is sustainably manufactured as a new machine, using carefully inspected, reusable cast iron components (table, headstock, and side supports). Press ram newly manufactured in a vibration-damping cast iron design. Drive system with a compact drive unit and a 2-connecting rod power transmission. • Total pressing force 200 t • Stroke rate 30...120 min-¹ • Working capacity 29 kNm • Ram adjustment 100 ±0.01 mm • Ram stroke, adjustable 30 - 150 mm • Press force monitoring • Hydraulic overload protection • Main control panel + Two-hand control panel Gkodpfszu Avbsx Aivec • Hardware and software interface for strip lubrication / roller feed / strip coiler • Control system SIEMENS S7-1500 • Remote maintenance

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Gsdpfx Aoxxb Rrsivekc Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER Measuring and marking plate made of cast steel/grey cast iron, heavily ribbed High-precision measuring plate with quality surface finish Year of manufacture: 1985 Length: 2000 mm Width: 1500 mm Thickness: 350 mm Plate thickness (top): 50 mm solid material with 300 mm ribs Working height: approx. 800 mm - with manually movable measuring arm, measuring range X=1490 mm, Y=1000 mm, Z=1250 mm - with 3-axis digital readout Grundig MZ 1030 - machined side surface at 90° angle to the table top, 2000 x 350 mm - 5 height-adjustable feet Required space (L x W x H): 2000 x 1500 x 2500 mm Weight: approx. 2600 kg In good condition Gkodpfx Aiopwpxcsvsc

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Gkedpex D Tbmofx Aivjc Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 527, Price for the machine: 214,500 EUR Price for the tools: 97,500 EUR Gjdpfx Aeu Ivc Noivekc

Condition: used, Continuous Casting Machine Gsdpsxixkwefx Aivskc

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Godpfx Ajthuzpoivokc Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router Godpfx Aoz Iz Imjivskc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 10306675, type of input current: three-phase, input voltage: 400 V, clamping force: 8,400 kN, input frequency: 50 Hz, Horizontal die casting machine Manufacturer: Bühler, Model: SC D/84, Year: 1999 Serial number: 10306675 Max. locking force: 8,400 kN Cycle time: 30 s Gkjdpfxoynh Dlo Aivjc Casting piston speed: 5.0 m/s Including Gerlieva GS 1200/1400Z mould spraying unit Including Westomat W900SLDG 900kg holding furnace Including ABB IRS5 45kg extraction robot

Condition: good (used), Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm Gkjdpfxec R Iyae Aivoc -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Gjdpfx Asza E Rmoivekc

Condition: repair required (used), Year of construction: 2001, functionality: not functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8,000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1,000 mm, clamping platens 1,300 x 1,300 mm, tie bar spacing 825 mm, tie bar diameter 180 mm, maximum casting force 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1,539 to 4,523 cm³, operating pressure 160 bar, drive motor 45 kW, equipped with MELTEC AVDF 1200/5000 dosing furnace, year 2017, serial number System sold as a donor for spare parts Technical details: Dimensions (L x W x H): approx. 8,000 x 7,500 x 3,500 mm Weight: approx. 36,000 kg Year of manufacture: 2001 Gksdpfxowc Tdzs Aivjc

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2093249C, total height: 1,050 mm, total width: 680 mm, input voltage: 400 V, power: 8 kW (10.88 HP), workpiece weight (max.): 175 kg, pressure: 2 bar, input frequency: 50 Hz, Professional, floor-standing Schultheiss VPC 055 / 400 Sp induction vacuum pressure casting machine. Manufactured in Germany, this heavy-duty unit is designed for large-volume, high-capacity jewelry production and industrial casting components where absolute speed and thermal stability are required. Equipped with a powerful 3-phase induction heating system and a digital West 6100+ temperature controller, it delivers rapid melting cycles and superb alloy homogeneity through an integrated mixing booster effect. Key Features: - Industrial Capacity: Equipped with a large crucible capacity, optimized for production-level batches. - 3-Phase Power System: 400V supply guarantees rapid melting times and consistent duty cycles. - Advanced Digital Monitoring: Integrated West 6100+ precision controller for exact thermal management. - Precision Vacuum & Pressure: Excellent fill rates for incredibly fine filigree details or heavy solid trees. Technical Specifications: - Manufacturer: Schultheiss GmbH (Germany) - Type: VPC 055 / 400 Sp - Year of Manufacture: 2009 Gsdpfxjy Tbigs Aivskc - Serial Number: 2093249C - Voltage: 400V / 50Hz (3-Phase) - Power: 11 kVA / 16 A (approx. 8 kW active power) - Max. Temperature: 1,450°C - Casting Pressure: Up to 2.0 bar - Condition: Great condition, fully functional, clean casting assembly, and clear interface controls. VPC 066

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 • Robust construction, mobile on wheels Gksdpjxm Uf Ssfx Aivsc • Includes control unit and hydraulic drive Condition: • NEW, unused • Only storage marks present (see pictures) • No operating hours

Condition: used, Year of construction: 2017, workpiece weight max. 2000 g Gjdpfx Aoy Diaujivskc used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. The device has been checked and repaired by the manufacturer

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 32577, Automated high-pressure die casting machine Bühler. Gsdpfxsfbl E Sj Aivjkc 7900 kN clamping force. 500 mm plunger stroke Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000) The machine is DISMANTLED. Has been repainted recently.

Condition: used, Year of construction: 2007, 3 x Frech die-casting machines DAW 80F RC, year of manufacture 2003, DAW 125 S DV, year of manufacture 1999, Godpfx Ajz Hkg Aoivekc DAW 125 F, year of manufacture 2007.

Condition: excellent (used), Year of construction: 2013, XYZ 1630 SLX CNC Lathe Gkedpfxsz E R N Ue Aivjc New 2013. Swing 400mm x 760mm B.C. Spindle speeds & bore 150- 2500rpm & 54mm. C/w 3jaw chuck, quick change tool-post.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Gkodpfx Aiozrnkrjvec Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10380840, clearance between the columns: 640 mm, column diameter: 125 mm, ejector force: 150,000 N, ejector stroke: 145 mm, mold height (min.): 300 mm, type of input current: three-phase, input voltage: 400 V, clamping force: 4,200 kN, Horizontal die casting machine Make: Bühler, Model: Evolution B42D, Year: 2004, Serial number: 10380940 Mould height: 300 - 700 mm Mould opening stroke: 640 mm Max. surface pressure: 100 N/mm² Min. clamping plate dimensions: 500 x 500 mm Gsdpfx Ajyngv Tjivjkc Clear tie bar spacing: 640 x 640 mm Tie bar diameter: 125 mm Ejector stroke: 145 mm Ejector force: 150 kN Max. closing force: 4200 kN Cycle time: 30 s Casting piston speed: 5.0 m/s Incl. die spraying system Gerlieva GS 1200/1400Z Incl. holding furnace Westomat ProDos DPC 900kg Incl. extraction robot ABB IRB 4600 M2004