Used Hardness Test for sale (12,217)

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 . 406678 Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Motor power: 500 W Power supply: 230 Volt, 50 Hz Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) Todpfx Ajxanrxod Ejd The machine is sold without PC and without software, only the described load cell is installed. Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Tjdpfx Asw Rz Tlsd Eod Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Condition: used, Description: Emission Test Chamber Manufacturer: Vötsch Model: VCE 200 Test chamber volume: 200 liters Temperature range: +20°C to +130°C Humidity range: 30 to 95% RH Temperature deviation: temporal ± 0.3 K Temperature deviation: spatial ± 0.5 K Average temperature change rate: cooling approx. 0.3 K/min, heating approx. 0.4 K/min Dew point range: +5°C to 60°C Humidity deviation: temporal ± 1 to 3% RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power / rated current: 21 kW / 41 A Refrigerant: R404A Internal test chamber dimensions: 610 x 610 x 560 mm (W/D/H) Overall dimensions: 1250 x 1700 x 2350 mm (W/D/H) Weight: approx. 750 kg Item Condition: Used item as shown in the pictures Please contact us if you have any questions Tjdpfx Aoxg Hrqod Esd Shipping: The quoted shipping costs apply to deliveries within Germany Worldwide shipping available (please inquire for shipping costs outside Germany) The given shipping costs apply to shipping within Germany Sale exclusively to business customers, without warranty or guarantee. Deviations from technical data and errors in the item description may occur and are reserved.

Condition: used, table clamping surface: 228 x 273 mm 3 T-slots: 12 mm in between 4 x 4 threaded holes: M 8 table height at zero position: 146 mm Space requirement: 250 x 290 mm Tsdpfx Aebbgcxjd Eod Weight: 41 kg

Condition: good (used), Climatic Test Chamber +10°C to +90°C, Air-Cooled The test chamber is designed and built for climatic testing within its operating range. Test procedures that determine the influence of temperature and humidity on material properties and functional reliability of the test specimen can be performed. The test chamber can be operated in manual mode (fixed-value mode) or automatic mode. The EDIT program can be used to program extensive climatic tests and save a maximum of 99 test programs. These test programs are run in automatic mode. The test chamber can be controlled during operation via the RS 232 interface with a computer and the TSI software or in ASCII mode. The operating temperature limiter protects the test specimen from excessively high temperatures. To protect the test specimen, the upper and lower temperature limits can also be set on the terminal. Manufacturer: Heraeus Vötsch Type: VC 0033 Specifications for temperature tests: Temperature range: +10°C to +90°C Humidity range: 30 - 95% Tedoxbnkwjpfx Ad Eod Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 2.7 kW Rated current: 12 A Refrigerant: R 404A Test chamber volume: approx. 333 liters Humidity range: Humidity range for normal operation (ranges 1 and 3) with a dew point limitation of +5°C Humidity range 3 is omitted if additionally equipped with a capacitive humidity measurement system Tolerances for standard climate conditions 23°C/65% RH Temperature ±0.1 K Humidity < ±1.5% 85°C / 85% RH Temperature ±0.1 K Humidity

Year of construction: 1990, condition: good (used), Offer 25223 Technical data: (non-binding) Tsdpfx Adewu Sxno Esd - Test panel for wall mounting with various test devices - Space requirement: W 600 x H 850 x D 300 mm - Weight: 40 kg

Condition: used, Unknown test mandrel 50,000 mm with cone holder. Information 1: H=35.643 Tjdpfx Adjw Ut D Ro Eed Statement 2: ø 50,000

Condition: good (used), Vötsch Model: VCS 7130-15 Vötsch Climate Test Chamber, Water-Cooled Temperature Test Data: Temperature range: -70°C to 180°C Temporal temperature deviation at center of workspace: ±0.3 to ±0.8 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 16 K/min Cooling: 14.5 K/min Climate Test Data: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation at center of workspace: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation at center of workspace: ±1 to ±3% RH Maximum heat compensation: 8000 W Enclosure dimensions: External dimensions with hinges and door lock: Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm Internal dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Test chamber volume: approx. 1300 liters Feedthroughs: The test chamber is equipped with feedthroughs on both the right and left sides. These allow for test leads and testing devices to be routed into the chamber. 1 x R1 NW 125 mm 1 x R1 NW 140 mm 1 x L1 NW 50 mm Test chamber illumination: Halogen bulb 24V, 50W Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 44.0 kW Rated current: 63.0 A Customer-provided fuse: 100 A slow-blow Maximum heat output to the environment: 2.2 kW Permissible test item weight: Total load on shelf supports: 100 kg Test chamber floor: 150 kg, Removable shelf: 50 kg Refrigerants: R 404A/R 23 Weight: 1900 kg For your security as a buyer, please note: The following steps are carried out in advance on our chambers offered for sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) Tsdpfx Aswvgwbod Esd (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions by phone.

Condition: used, Year of construction: 2005, functionality: limited functionality, machine/vehicle number: ENZ 6CAL, Equipment: CE marking, Used, Working environmental chamber, ESPEC ESX-2CA, Air cooled, Although this model has humidity function, This has been disabled & is now only a temperature only, -70C to +150C, Cooling rate 4.0C per min. Internal dimensions (W,D,H) 500mm, 600mm, 750mm. Comes with calibration. Tedpfx Adjwy Uq Re Eod

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, For sale is a used, fully functional Dynapack DAQ54 chassis dynamometer with direct wheel hub connection. The system was purchased in March 2019 and has completed approximately 300 test cycles since – always carefully maintained and in excellent condition. The test bench comprises four mobile measurement units that are mounted directly to the vehicle's wheel hubs (after removing the wheels). Operation and data evaluation are handled via the included control unit with original software. Todpfewuqwvox Ad Eod Technical specifications: Max. measurable power: 3,000 hp / 2,200 kW (up to 1,500 hp / 1,100 kW per axle) Supports front-, rear-, and all-wheel drive Stationary or mobile operation (entire unit fits in a van) System advantages: - Precise power measurement via direct force transfer – no slippage, no friction losses - Maximum safety: No risk of tire blowouts or vehicle movement - Flexible deployment: Quick reconfiguration and compact design, also ideal for mobile use - Perfectly suited for tuning, development, and performance diagnostics Feel free to ask further questions. Inspection and testing are possible by arrangement.

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Todpfsxbgrgjx Ad Esd Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, total surface approx. 33,54 m² 6 plates 2,000 x 1,290 mm width of T-slots 30 mm Tjdec S R H Njpfx Ad Eod thickness of the plates 95 mm weight approx. 1,700 kg per plate - price per plate -

Year of construction: 2025, condition: as good as new (ex-display), Single-column table-top machine max. testing force 2.5 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, Machine price WITHOUT clamping device as the final equipment is based on your requirements: included in the price: - Machine in working order - incl. load cell 2,5 kN (grade 05 from 25 - 2500 N / grade 1 from 5 - 25 N - Warranty 24 months - Software LabTest - unsurpassed flexibility, complete software - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - compression plates Todecw Ix Sspfx Ad Eod - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers - High temperature / hot draft furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Operating hours: 630 h, condition: excellent (used), Vötsch Model: VT 7018 Tedpfsw Nqimox Ad Esd Air-cooled temperature test chamber Only approx. 630 operating hours (read out)! Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm External dimensions: Width 865 x Depth 1280 x Height 1780 mm Test chamber volume: approx. 190 liters Technical specifications for temperature tests: Temperature range: -70 °C to +180 °C Temperature deviation in steady state, according to IEC 60068-3-5 depending on the test chamber temperature temporal ±0.1 to ±0.5 K spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min. Cooling: 2.3 K/min. Thermal compensation max. 1000 W Tube port L1: DN 50 mm Tube port L2: DN 125 mm Tube port R1 R2: DN 125 mm Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 5.9 kW Rated current: 12 A Protection: 16 A time-lag, to be provided by customer Weight: approx. 460 kg net Refrigerants: R 404A and R 23 Important safety information for you as a buyer! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data!) We are happy to answer further questions by phone.

Condition: used, Year of construction: 2005, operating hours: 22,245 h, functionality: fully functional, machine/vehicle number: ENZ 6CAL, Equipment: CE marking, Used, Working environmental chamber, ESPEC ENZ-6CAL, Air cooled, temperature only, -70C to +150C, 8C per minute cooling, Internal dimensions (W,D,H) 600mm, 743mm, 850mm. Comes with calibration. Tedpfx Aewy Uqwod Ejd

Year of construction: 2016, operating hours: 9,195 h, condition: excellent (used), Vötsch temperature test chamber, water-cooled Tsdpot Txttofx Ad Eod Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chamber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 9195 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Operating hours: 3,888 h, condition: good (used), Heraeus Xenotest 1200 CPS weathering tester Xenon device for testing the lightfastness and weather resistance of materials under simulated conditions Electrical connection Voltage: 400 V Nominal current: 50 A max. Connected load: 33 kVA max. Power consumption of xenon lamps: 2.8 - 6 kW per lamp Compensation: 3 capacitors, 50 uF each Operating hours: 3888 You can find more items - new and used - in our shop! Tsdpfxoxal Haj Ad Ejd International shipping costs on request!

Condition: excellent (used), Weiss Model: WK3-600/70 Climate Test Chamber, Water-cooled Specifications for temperature testing: Temperature range: -70°C to +180°C Temperature change rate: Heating: 4.0 K/min Cooling: 2.5 K/min Temperature deviation: Temporal: ±0.1 to ±0.5 K Spatial: ±0.5 to ±1.5 K Heat compensation: max. 2500 W Specifications for climate testing: Temperature range: +10 to +95 °C Dew point temperature range: -3 to +94°C Humidity range: 10 to 98% r.h. Temperature deviation (temporal): ±0.1 to ±0.3 K Temperature deviation (spatial): ±0.5 to ±1 K Humidity deviation (temporal): ±1 to ±3% r.h. Temperature uniformity (spatial): ±0.5 to ±1.0 K Heat compensation: max. 500 W Test chamber volume: 600 liters Test chamber dimensions (H x W x D): 950 mm x 800 mm x 800 mm External dimensions (H x W x D): 1998 mm x 1000 mm x 1745 mm Feedthrough diameters: NW 125 mm and NW 50 mm Operating data: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal power: 9.1 kW Tedpfx Asw Nqhpsd Eod Nominal current: 19.0 A Refrigerant: R 452A & R23 Weight: 680 kg Important safety information for buyers! The following procedures are carried out on all chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. If necessary, the chamber is refilled with refrigerant in compliance with applicable laws 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Specifications subject to change and possible errors!) If you have further questions, feel free to call us.

Year of construction: 2016, operating hours: 14,242 h, condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chanber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 14 242 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Tjdpfx Ajt Txqrjd Esd Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: good (used), Large-scale system for climate tests with S!MCON control Design The system consists of the following main components: - Walk-in, insulated test room - Air treatment room - Machine unit - Air conditioning system - Control cabinet Test room The fixtures in the test room are made of corrosion-resistant material. The test room can be illuminated, is walk-in, and has a condensate and cleaning drain. Air treatment room The air treatment room is located behind the air baffle in the insulated interior. It contains the following components necessary for temperature control and is accessible via easily removable panels. - Test room fans - Heat exchangers - Electric heaters - Ventilation and exhaust system - Temperature sensors In the air treatment room, the air is tempered (cooled/heated), humidified and dehumidified, and circulated by fans. The air is drawn in under the ceiling and expelled at floor level. Sensors The temperature and humidity sensors are located behind the air baffle in the air treatment room. Machine Unit The machine unit, consisting of refrigeration units, supplies the air treatment room with the required energy. Climate System The climate system consists of: - Steam humidifier - Dehumidification evaporator Technical Data Test chamber volume: approx. 32 m³ Tedpfxow U Sv Eo Ad Eod Direct temperature range: -40 to +100°C Temperature fluctuation over time in the center of the usable space: +/- 0.5 to +/- 1 Temperature change rate Heating: from -35°C to +50°C at 3 K/min Cooling: from +85°C to +85°C at 2 K/min from +80°C to -40°C at 1 K/min Data for climate testing Temperature range: 10 to 95°C Humidity range: 10 to 95% RH Dew point range: 5 to 93°C Temperature fluctuation: +/- 5°C Humidity fluctuation: +/- 3 to +/- 5% RH Cooling water specifications Connections Inlet: 2 x 1 1/2" RH Return: 2 x 1 1/2" RH Consumption at full load: max. 16 m³/h Maximum load on the test chamber floor: 10,000 N/m² Nominal voltage: 3/N / PE AC 400 V 50 Hz Nominal power: 97 kW Nominal current: 148 A Dimensions: Test chamber: Width 3.60 m, Height 2.20 m, Depth 5 m Climate chamber divided for transport at a specified location (approx. 2.50 m). Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Tsdpfx Aow I Rxrod Eod Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Weiss climate test chamber with humidity Here we offer you a Vötsch environmental test chamber with humidity. Vötsch 4060-10 air-cooled with humidity Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 2150 mm, width: 1225 mm, depth: 2890 mm Test chamber capacity: approx. 600 liters Operation hours: 3354 h Year of construction: 2007 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.8 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 9.5 K/min Cooling 12.0 K/min Heat compensation at 20°C max. 8000 W Heat compensation at -20°C max. 3000 W Data for climate tests: Temperature range +10°C to +95°C Humidity range 10% to 95%r.H. Temperature homogeneity in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation in time 1 to 3 RH% Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 16,0 kW Rated current: 26.0 A Refrigerant: R-404A The rail pair is available for rolling. Two chambers bottom, one complete, one with hole diameter 300mm. Tjdpfx Adot E Sfgo Ejd Weight (approx.): 1020 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Condition: good (used), Weiss Type: WK3-600/70 Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temperature change rate: Heating: 4.0 K/min Cooling: 2.5 K/min Temperature deviation: Over time: ±0.1 to ±0.5 K Spatially: ±0.5 to ±1.5 K Heat compensation max.: 2,500 W Specifications for Climate Testing: Temperature range: +10 to +95 °C Dew point temperature range: -3 to +94°C Humidity range: 10 to 98 % rH Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % rH Temperature uniformity (spatial): ±0.5 to ±1.0 K Heat compensation max.: 500 W Test chamber volume: 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1,998 mm, Width 1,000 mm, Depth 1,745 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerant: R404A & R23 Weight: 680 kg Important information for you as the buyer: The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Todpfxow Inmme Ad Eed Scope of delivery: (See picture) (Specifications subject to change. Errors and omissions excepted!) If you have any further questions, we are happy to answer them by phone.

Condition: used, Vötsch Model: VC 0018 Climate Test Chamber, Air-Cooled Test Chamber Dimensions: Width 580 x Depth 450 x Height 750 mm External Dimensions: Width 865 x Depth 1150 x Height 1780 mm Test Chamber Volume: approx. 190 liters Specifications for Temperature Testing: Temperature Range: -10°C to +90°C Temperature Deviation at steady state, according to IEC 60068-3-5, depending on chamber temperature over time: ±0.1 to ±0.5 K spatial: ±0.5 to ±2.0 K Temperature Change Rate according to IEC 60068-3-5 Heating: 0.6 K/min Cooling: 0.3 K/min Heat compensation in the range +20°C to +50°C: 200 W Calibration Points: +4°C and +90°C Specifications for Climate Testing: Temperature Range: +10°C to +90°C Tjdpfx Aew Hz S Ujd Esd Temperature Deviation at steady state, according to IEC 60068-3-5, depending on chamber temperature over time: ±0.1 to ±0.3 K spatial: ±0.5 to ±1.0 K Humidity Range: 10% to 98% RH Electrical Connection: Rated Voltage: 1/N/PE AC 230V ±10% 50Hz Rated Power: 1.7 kW Rated Current: 9.5 A (neutral conductor plug loaded), Schuko approx. connection cable: 3.5 m Protection: 16 A slow-blow, provided by the customer Weight: approx. 380 kg net Refrigerant: R 134A For your safety as a buyer, please note the following information! The following points are carried out on all climate chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. If necessary, a refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors are excepted!) We are happy to answer any further questions you may have by phone.

Condition: used, Weiss Type: WK1/1500/40 Weiss Climate Test Chamber, Air-Cooled with Humidity Control (converted to use refrigerant R-452a) Temperature range: -40°C to +180°C Cooling rate approx. 2.5 K/min, heating rate approx. 3.5 K/min Temporal temperature deviation at center of test space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Tedpfjw Hcttox Ad Eed Temperature range: +10°C to +95°C Humidity range: 10% to 98% r.H. Temporal temperature deviation at center of test space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Heat compensation In the range of +25°C to +95°C, at a relative humidity up to 90%: 500 W Test chamber dimensions: Height: 950 mm, Width: 1100 mm, Depth: 1475 mm External dimensions: Height: 2005 mm, Width: 1300 mm, Depth: 2450 mm Test volume: approx. 1540 liters Test chamber lighting: Halogen bulb 12V, 50W Rated voltage: 3/NPEAC 400V ±10% 50Hz Rated power: 11.5 kW, Rated current: 22.0 A Fuse on site: 32A slow-blow Protection class (control cabinet and operator panel): IP 54 Refrigerant: R-452a Weight: 920 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.